2018-05-22 21:43:36 +02:00
|
|
|
// Copyright 2016-2018, Pulumi Corporation.
|
|
|
|
|
//
|
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
|
//
|
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
|
//
|
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
|
// limitations under the License.
|
Implement initial Lumi-as-a-library
This is the initial step towards redefining Lumi as a library that runs
atop vanilla Node.js/V8, rather than as its own runtime.
This change is woefully incomplete but this includes some of the more
stable pieces of my current work-in-progress.
The new structure is that within the sdk/ directory we will have a client
library per language. This client library contains the object model for
Lumi (resources, properties, assets, config, etc), in addition to the
"language runtime host" components required to interoperate with the
Lumi resource monitor. This resource monitor is effectively what we call
"Lumi" today, in that it's the thing orchestrating plans and deployments.
Inside the sdk/ directory, you will find nodejs/, the Node.js client
library, alongside proto/, the definitions for RPC interop between the
different pieces of the system. This includes existing RPC definitions
for resource providers, etc., in addition to the new ones for hosting
different language runtimes from within Lumi.
These new interfaces are surprisingly simple. There is effectively a
bidirectional RPC channel between the Lumi resource monitor, represented
by the lumirpc.ResourceMonitor interface, and each language runtime,
represented by the lumirpc.LanguageRuntime interface.
The overall orchestration goes as follows:
1) Lumi decides it needs to run a program written in language X, so
it dynamically loads the language runtime plugin for language X.
2) Lumi passes that runtime a loopback address to its ResourceMonitor
service, while language X will publish a connection back to its
LanguageRuntime service, which Lumi will talk to.
3) Lumi then invokes LanguageRuntime.Run, passing information like
the desired working directory, program name, arguments, and optional
configuration variables to make available to the program.
4) The language X runtime receives this, unpacks it and sets up the
necessary context, and then invokes the program. The program then
calls into Lumi object model abstractions that internally communicate
back to Lumi using the ResourceMonitor interface.
5) The key here is ResourceMonitor.NewResource, which Lumi uses to
serialize state about newly allocated resources. Lumi receives these
and registers them as part of the plan, doing the usual diffing, etc.,
to decide how to proceed. This interface is perhaps one of the
most subtle parts of the new design, as it necessitates the use of
promises internally to allow parallel evaluation of the resource plan,
letting dataflow determine the available concurrency.
6) The program exits, and Lumi continues on its merry way. If the program
fails, the RunResponse will include information about the failure.
Due to (5), all properties on resources are now instances of a new
Property<T> type. A Property<T> is just a thin wrapper over a T, but it
encodes the special properties of Lumi resource properties. Namely, it
is possible to create one out of a T, other Property<T>, Promise<T>, or
to freshly allocate one. In all cases, the Property<T> does not "settle"
until its final state is known. This cannot occur before the deployment
actually completes, and so in general it's not safe to depend on concrete
resolutions of values (unlike ordinary Promise<T>s which are usually
expected to resolve). As a result, all derived computations are meant to
use the `then` function (as in `someValue.then(v => v+x)`).
Although this change includes tests that may be run in isolation to test
the various RPC interactions, we are nowhere near finished. The remaining
work primarily boils down to three things:
1) Wiring all of this up to the Lumi code.
2) Fixing the handful of known loose ends required to make this work,
primarily around the serialization of properties (waiting on
unresolved ones, serializing assets properly, etc).
3) Implementing lambda closure serialization as a native extension.
This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
|
|
|
|
|
|
|
|
// Enable source map support so we get good stack traces.
|
|
|
|
|
import "source-map-support/register";
|
|
|
|
|
|
|
|
|
|
// Export top-level elements.
|
2017-08-31 19:45:48 +02:00
|
|
|
export * from "./config";
|
2018-03-09 22:48:42 +01:00
|
|
|
export * from "./errors";
|
2018-08-07 22:14:16 +02:00
|
|
|
export * from "./invoke";
|
2017-10-19 17:26:57 +02:00
|
|
|
export * from "./metadata";
|
2019-02-01 03:08:17 +01:00
|
|
|
export * from "./output";
|
Implement initial Lumi-as-a-library
This is the initial step towards redefining Lumi as a library that runs
atop vanilla Node.js/V8, rather than as its own runtime.
This change is woefully incomplete but this includes some of the more
stable pieces of my current work-in-progress.
The new structure is that within the sdk/ directory we will have a client
library per language. This client library contains the object model for
Lumi (resources, properties, assets, config, etc), in addition to the
"language runtime host" components required to interoperate with the
Lumi resource monitor. This resource monitor is effectively what we call
"Lumi" today, in that it's the thing orchestrating plans and deployments.
Inside the sdk/ directory, you will find nodejs/, the Node.js client
library, alongside proto/, the definitions for RPC interop between the
different pieces of the system. This includes existing RPC definitions
for resource providers, etc., in addition to the new ones for hosting
different language runtimes from within Lumi.
These new interfaces are surprisingly simple. There is effectively a
bidirectional RPC channel between the Lumi resource monitor, represented
by the lumirpc.ResourceMonitor interface, and each language runtime,
represented by the lumirpc.LanguageRuntime interface.
The overall orchestration goes as follows:
1) Lumi decides it needs to run a program written in language X, so
it dynamically loads the language runtime plugin for language X.
2) Lumi passes that runtime a loopback address to its ResourceMonitor
service, while language X will publish a connection back to its
LanguageRuntime service, which Lumi will talk to.
3) Lumi then invokes LanguageRuntime.Run, passing information like
the desired working directory, program name, arguments, and optional
configuration variables to make available to the program.
4) The language X runtime receives this, unpacks it and sets up the
necessary context, and then invokes the program. The program then
calls into Lumi object model abstractions that internally communicate
back to Lumi using the ResourceMonitor interface.
5) The key here is ResourceMonitor.NewResource, which Lumi uses to
serialize state about newly allocated resources. Lumi receives these
and registers them as part of the plan, doing the usual diffing, etc.,
to decide how to proceed. This interface is perhaps one of the
most subtle parts of the new design, as it necessitates the use of
promises internally to allow parallel evaluation of the resource plan,
letting dataflow determine the available concurrency.
6) The program exits, and Lumi continues on its merry way. If the program
fails, the RunResponse will include information about the failure.
Due to (5), all properties on resources are now instances of a new
Property<T> type. A Property<T> is just a thin wrapper over a T, but it
encodes the special properties of Lumi resource properties. Namely, it
is possible to create one out of a T, other Property<T>, Promise<T>, or
to freshly allocate one. In all cases, the Property<T> does not "settle"
until its final state is known. This cannot occur before the deployment
actually completes, and so in general it's not safe to depend on concrete
resolutions of values (unlike ordinary Promise<T>s which are usually
expected to resolve). As a result, all derived computations are meant to
use the `then` function (as in `someValue.then(v => v+x)`).
Although this change includes tests that may be run in isolation to test
the various RPC interactions, we are nowhere near finished. The remaining
work primarily boils down to three things:
1) Wiring all of this up to the Lumi code.
2) Fixing the handful of known loose ends required to make this work,
primarily around the serialization of properties (waiting on
unresolved ones, serializing assets properly, etc).
3) Implementing lambda closure serialization as a native extension.
This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
|
|
|
export * from "./resource";
|
2018-11-14 22:33:35 +01:00
|
|
|
export * from "./stackReference";
|
Implement initial Lumi-as-a-library
This is the initial step towards redefining Lumi as a library that runs
atop vanilla Node.js/V8, rather than as its own runtime.
This change is woefully incomplete but this includes some of the more
stable pieces of my current work-in-progress.
The new structure is that within the sdk/ directory we will have a client
library per language. This client library contains the object model for
Lumi (resources, properties, assets, config, etc), in addition to the
"language runtime host" components required to interoperate with the
Lumi resource monitor. This resource monitor is effectively what we call
"Lumi" today, in that it's the thing orchestrating plans and deployments.
Inside the sdk/ directory, you will find nodejs/, the Node.js client
library, alongside proto/, the definitions for RPC interop between the
different pieces of the system. This includes existing RPC definitions
for resource providers, etc., in addition to the new ones for hosting
different language runtimes from within Lumi.
These new interfaces are surprisingly simple. There is effectively a
bidirectional RPC channel between the Lumi resource monitor, represented
by the lumirpc.ResourceMonitor interface, and each language runtime,
represented by the lumirpc.LanguageRuntime interface.
The overall orchestration goes as follows:
1) Lumi decides it needs to run a program written in language X, so
it dynamically loads the language runtime plugin for language X.
2) Lumi passes that runtime a loopback address to its ResourceMonitor
service, while language X will publish a connection back to its
LanguageRuntime service, which Lumi will talk to.
3) Lumi then invokes LanguageRuntime.Run, passing information like
the desired working directory, program name, arguments, and optional
configuration variables to make available to the program.
4) The language X runtime receives this, unpacks it and sets up the
necessary context, and then invokes the program. The program then
calls into Lumi object model abstractions that internally communicate
back to Lumi using the ResourceMonitor interface.
5) The key here is ResourceMonitor.NewResource, which Lumi uses to
serialize state about newly allocated resources. Lumi receives these
and registers them as part of the plan, doing the usual diffing, etc.,
to decide how to proceed. This interface is perhaps one of the
most subtle parts of the new design, as it necessitates the use of
promises internally to allow parallel evaluation of the resource plan,
letting dataflow determine the available concurrency.
6) The program exits, and Lumi continues on its merry way. If the program
fails, the RunResponse will include information about the failure.
Due to (5), all properties on resources are now instances of a new
Property<T> type. A Property<T> is just a thin wrapper over a T, but it
encodes the special properties of Lumi resource properties. Namely, it
is possible to create one out of a T, other Property<T>, Promise<T>, or
to freshly allocate one. In all cases, the Property<T> does not "settle"
until its final state is known. This cannot occur before the deployment
actually completes, and so in general it's not safe to depend on concrete
resolutions of values (unlike ordinary Promise<T>s which are usually
expected to resolve). As a result, all derived computations are meant to
use the `then` function (as in `someValue.then(v => v+x)`).
Although this change includes tests that may be run in isolation to test
the various RPC interactions, we are nowhere near finished. The remaining
work primarily boils down to three things:
1) Wiring all of this up to the Lumi code.
2) Fixing the handful of known loose ends required to make this work,
primarily around the serialization of properties (waiting on
unresolved ones, serializing assets properly, etc).
3) Implementing lambda closure serialization as a native extension.
This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
|
|
|
|
|
|
|
|
// Export submodules individually.
|
|
|
|
|
import * as asset from "./asset";
|
2021-03-17 12:58:46 +01:00
|
|
|
import * as automation from "./automation";
|
2017-10-14 23:29:49 +02:00
|
|
|
import * as dynamic from "./dynamic";
|
2018-10-27 21:19:42 +02:00
|
|
|
import * as iterable from "./iterable";
|
2017-10-08 21:10:46 +02:00
|
|
|
import * as log from "./log";
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 04:33:55 +02:00
|
|
|
import * as provider from "./provider";
|
Implement initial Lumi-as-a-library
This is the initial step towards redefining Lumi as a library that runs
atop vanilla Node.js/V8, rather than as its own runtime.
This change is woefully incomplete but this includes some of the more
stable pieces of my current work-in-progress.
The new structure is that within the sdk/ directory we will have a client
library per language. This client library contains the object model for
Lumi (resources, properties, assets, config, etc), in addition to the
"language runtime host" components required to interoperate with the
Lumi resource monitor. This resource monitor is effectively what we call
"Lumi" today, in that it's the thing orchestrating plans and deployments.
Inside the sdk/ directory, you will find nodejs/, the Node.js client
library, alongside proto/, the definitions for RPC interop between the
different pieces of the system. This includes existing RPC definitions
for resource providers, etc., in addition to the new ones for hosting
different language runtimes from within Lumi.
These new interfaces are surprisingly simple. There is effectively a
bidirectional RPC channel between the Lumi resource monitor, represented
by the lumirpc.ResourceMonitor interface, and each language runtime,
represented by the lumirpc.LanguageRuntime interface.
The overall orchestration goes as follows:
1) Lumi decides it needs to run a program written in language X, so
it dynamically loads the language runtime plugin for language X.
2) Lumi passes that runtime a loopback address to its ResourceMonitor
service, while language X will publish a connection back to its
LanguageRuntime service, which Lumi will talk to.
3) Lumi then invokes LanguageRuntime.Run, passing information like
the desired working directory, program name, arguments, and optional
configuration variables to make available to the program.
4) The language X runtime receives this, unpacks it and sets up the
necessary context, and then invokes the program. The program then
calls into Lumi object model abstractions that internally communicate
back to Lumi using the ResourceMonitor interface.
5) The key here is ResourceMonitor.NewResource, which Lumi uses to
serialize state about newly allocated resources. Lumi receives these
and registers them as part of the plan, doing the usual diffing, etc.,
to decide how to proceed. This interface is perhaps one of the
most subtle parts of the new design, as it necessitates the use of
promises internally to allow parallel evaluation of the resource plan,
letting dataflow determine the available concurrency.
6) The program exits, and Lumi continues on its merry way. If the program
fails, the RunResponse will include information about the failure.
Due to (5), all properties on resources are now instances of a new
Property<T> type. A Property<T> is just a thin wrapper over a T, but it
encodes the special properties of Lumi resource properties. Namely, it
is possible to create one out of a T, other Property<T>, Promise<T>, or
to freshly allocate one. In all cases, the Property<T> does not "settle"
until its final state is known. This cannot occur before the deployment
actually completes, and so in general it's not safe to depend on concrete
resolutions of values (unlike ordinary Promise<T>s which are usually
expected to resolve). As a result, all derived computations are meant to
use the `then` function (as in `someValue.then(v => v+x)`).
Although this change includes tests that may be run in isolation to test
the various RPC interactions, we are nowhere near finished. The remaining
work primarily boils down to three things:
1) Wiring all of this up to the Lumi code.
2) Fixing the handful of known loose ends required to make this work,
primarily around the serialization of properties (waiting on
unresolved ones, serializing assets properly, etc).
3) Implementing lambda closure serialization as a native extension.
This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
|
|
|
import * as runtime from "./runtime";
|
2019-07-16 21:12:21 +02:00
|
|
|
import * as utils from "./utils";
|
2021-03-17 12:58:46 +01:00
|
|
|
export { asset, automation, dynamic, iterable, log, provider, runtime, utils };
|
2018-08-02 22:25:49 +02:00
|
|
|
|
|
|
|
|
// @pulumi is a deployment-only module. If someone tries to capture it, and we fail for some reason
|
|
|
|
|
// we want to give a good message about what the problem likely is. Note that capturing a
|
|
|
|
|
// deployment time module can be ok in some cases. For example, using "new pulumi.Config" is fine.
|
|
|
|
|
// However, in general, the majority of this API is not safe to use at 'run time' and will fail.
|
2019-04-24 04:24:06 +02:00
|
|
|
/** @internal */
|
2018-08-02 22:25:49 +02:00
|
|
|
export const deploymentOnlyModule = true;
|
