pulumi/sdk/nodejs/proto/resource_grpc_pb.js

240 lines
9.3 KiB
JavaScript
Raw Permalink Normal View History

Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
// GENERATED CODE -- DO NOT EDIT!
// Original file comments:
// Copyright 2016-2018, Pulumi Corporation.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
//
'use strict';
var grpc = require('@grpc/grpc-js');
Switch to parent pointers; display components nicely This change switches from child lists to parent pointers, in the way resource ancestries are represented. This cleans up a fair bit of the old parenting logic, including all notion of ambient parent scopes (and will notably address pulumi/pulumi#435). This lets us show a more parent/child display in the output when doing planning and updating. For instance, here is an update of a lambda's text, which is logically part of a cloud timer: * cloud:timer:Timer: (same) [urn=urn:pulumi:malta::lm-cloud::cloud:timer:Timer::lm-cts-malta-job-CleanSnapshots] * cloud:function:Function: (same) [urn=urn:pulumi:malta::lm-cloud::cloud:function:Function::lm-cts-malta-job-CleanSnapshots] * aws:serverless:Function: (same) [urn=urn:pulumi:malta::lm-cloud::aws:serverless:Function::lm-cts-malta-job-CleanSnapshots] ~ aws:lambda/function:Function: (modify) [id=lm-cts-malta-job-CleanSnapshots-fee4f3bf41280741] [urn=urn:pulumi:malta::lm-cloud::aws:lambda/function:Function::lm-cts-malta-job-CleanSnapshots] - code : archive(assets:2092f44) { // etc etc etc Note that we still get walls of text, but this will be actually quite nice when combined with pulumi/pulumi#454. I've also suppressed printing properties that didn't change during updates when --detailed was not passed, and also suppressed empty strings and zero-length arrays (since TF uses these as defaults in many places and it just makes creation and deletion quite verbose). Note that this is a far cry from everything we can possibly do here as part of pulumi/pulumi#340 (and even pulumi/pulumi#417). But it's a good start towards taming some of our output spew.
2017-11-17 03:21:41 +01:00
var resource_pb = require('./resource_pb.js');
var google_protobuf_empty_pb = require('google-protobuf/google/protobuf/empty_pb.js');
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
var google_protobuf_struct_pb = require('google-protobuf/google/protobuf/struct_pb.js');
var provider_pb = require('./provider_pb.js');
function serialize_google_protobuf_Empty(arg) {
if (!(arg instanceof google_protobuf_empty_pb.Empty)) {
throw new Error('Expected argument of type google.protobuf.Empty');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_google_protobuf_Empty(buffer_arg) {
return google_protobuf_empty_pb.Empty.deserializeBinary(new Uint8Array(buffer_arg));
}
function serialize_pulumirpc_CallRequest(arg) {
if (!(arg instanceof provider_pb.CallRequest)) {
throw new Error('Expected argument of type pulumirpc.CallRequest');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_CallRequest(buffer_arg) {
return provider_pb.CallRequest.deserializeBinary(new Uint8Array(buffer_arg));
}
function serialize_pulumirpc_CallResponse(arg) {
if (!(arg instanceof provider_pb.CallResponse)) {
throw new Error('Expected argument of type pulumirpc.CallResponse');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_CallResponse(buffer_arg) {
return provider_pb.CallResponse.deserializeBinary(new Uint8Array(buffer_arg));
}
function serialize_pulumirpc_InvokeRequest(arg) {
if (!(arg instanceof provider_pb.InvokeRequest)) {
throw new Error('Expected argument of type pulumirpc.InvokeRequest');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_InvokeRequest(buffer_arg) {
return provider_pb.InvokeRequest.deserializeBinary(new Uint8Array(buffer_arg));
}
function serialize_pulumirpc_InvokeResponse(arg) {
if (!(arg instanceof provider_pb.InvokeResponse)) {
throw new Error('Expected argument of type pulumirpc.InvokeResponse');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_InvokeResponse(buffer_arg) {
return provider_pb.InvokeResponse.deserializeBinary(new Uint8Array(buffer_arg));
}
function serialize_pulumirpc_ReadResourceRequest(arg) {
if (!(arg instanceof resource_pb.ReadResourceRequest)) {
throw new Error('Expected argument of type pulumirpc.ReadResourceRequest');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_ReadResourceRequest(buffer_arg) {
return resource_pb.ReadResourceRequest.deserializeBinary(new Uint8Array(buffer_arg));
}
function serialize_pulumirpc_ReadResourceResponse(arg) {
if (!(arg instanceof resource_pb.ReadResourceResponse)) {
throw new Error('Expected argument of type pulumirpc.ReadResourceResponse');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_ReadResourceResponse(buffer_arg) {
return resource_pb.ReadResourceResponse.deserializeBinary(new Uint8Array(buffer_arg));
}
function serialize_pulumirpc_RegisterResourceOutputsRequest(arg) {
if (!(arg instanceof resource_pb.RegisterResourceOutputsRequest)) {
throw new Error('Expected argument of type pulumirpc.RegisterResourceOutputsRequest');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_RegisterResourceOutputsRequest(buffer_arg) {
return resource_pb.RegisterResourceOutputsRequest.deserializeBinary(new Uint8Array(buffer_arg));
}
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
function serialize_pulumirpc_RegisterResourceRequest(arg) {
if (!(arg instanceof resource_pb.RegisterResourceRequest)) {
throw new Error('Expected argument of type pulumirpc.RegisterResourceRequest');
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
}
return Buffer.from(arg.serializeBinary());
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
}
function deserialize_pulumirpc_RegisterResourceRequest(buffer_arg) {
return resource_pb.RegisterResourceRequest.deserializeBinary(new Uint8Array(buffer_arg));
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
}
function serialize_pulumirpc_RegisterResourceResponse(arg) {
if (!(arg instanceof resource_pb.RegisterResourceResponse)) {
throw new Error('Expected argument of type pulumirpc.RegisterResourceResponse');
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
}
return Buffer.from(arg.serializeBinary());
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
}
function deserialize_pulumirpc_RegisterResourceResponse(buffer_arg) {
return resource_pb.RegisterResourceResponse.deserializeBinary(new Uint8Array(buffer_arg));
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
}
2019-04-12 20:27:18 +02:00
function serialize_pulumirpc_SupportsFeatureRequest(arg) {
if (!(arg instanceof resource_pb.SupportsFeatureRequest)) {
throw new Error('Expected argument of type pulumirpc.SupportsFeatureRequest');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_SupportsFeatureRequest(buffer_arg) {
return resource_pb.SupportsFeatureRequest.deserializeBinary(new Uint8Array(buffer_arg));
}
function serialize_pulumirpc_SupportsFeatureResponse(arg) {
if (!(arg instanceof resource_pb.SupportsFeatureResponse)) {
throw new Error('Expected argument of type pulumirpc.SupportsFeatureResponse');
}
return Buffer.from(arg.serializeBinary());
}
function deserialize_pulumirpc_SupportsFeatureResponse(buffer_arg) {
return resource_pb.SupportsFeatureResponse.deserializeBinary(new Uint8Array(buffer_arg));
}
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
// ResourceMonitor is the interface a source uses to talk back to the planning monitor orchestrating the execution.
var ResourceMonitorService = exports.ResourceMonitorService = {
2019-04-12 20:27:18 +02:00
supportsFeature: {
path: '/pulumirpc.ResourceMonitor/SupportsFeature',
requestStream: false,
responseStream: false,
requestType: resource_pb.SupportsFeatureRequest,
responseType: resource_pb.SupportsFeatureResponse,
requestSerialize: serialize_pulumirpc_SupportsFeatureRequest,
requestDeserialize: deserialize_pulumirpc_SupportsFeatureRequest,
responseSerialize: serialize_pulumirpc_SupportsFeatureResponse,
responseDeserialize: deserialize_pulumirpc_SupportsFeatureResponse,
},
invoke: {
path: '/pulumirpc.ResourceMonitor/Invoke',
requestStream: false,
responseStream: false,
requestType: provider_pb.InvokeRequest,
responseType: provider_pb.InvokeResponse,
requestSerialize: serialize_pulumirpc_InvokeRequest,
requestDeserialize: deserialize_pulumirpc_InvokeRequest,
responseSerialize: serialize_pulumirpc_InvokeResponse,
responseDeserialize: deserialize_pulumirpc_InvokeResponse,
},
streamInvoke: {
path: '/pulumirpc.ResourceMonitor/StreamInvoke',
requestStream: false,
responseStream: true,
requestType: provider_pb.InvokeRequest,
responseType: provider_pb.InvokeResponse,
requestSerialize: serialize_pulumirpc_InvokeRequest,
requestDeserialize: deserialize_pulumirpc_InvokeRequest,
responseSerialize: serialize_pulumirpc_InvokeResponse,
responseDeserialize: deserialize_pulumirpc_InvokeResponse,
},
call: {
path: '/pulumirpc.ResourceMonitor/Call',
requestStream: false,
responseStream: false,
requestType: provider_pb.CallRequest,
responseType: provider_pb.CallResponse,
requestSerialize: serialize_pulumirpc_CallRequest,
requestDeserialize: deserialize_pulumirpc_CallRequest,
responseSerialize: serialize_pulumirpc_CallResponse,
responseDeserialize: deserialize_pulumirpc_CallResponse,
},
readResource: {
path: '/pulumirpc.ResourceMonitor/ReadResource',
requestStream: false,
responseStream: false,
requestType: resource_pb.ReadResourceRequest,
responseType: resource_pb.ReadResourceResponse,
requestSerialize: serialize_pulumirpc_ReadResourceRequest,
requestDeserialize: deserialize_pulumirpc_ReadResourceRequest,
responseSerialize: serialize_pulumirpc_ReadResourceResponse,
responseDeserialize: deserialize_pulumirpc_ReadResourceResponse,
},
registerResource: {
path: '/pulumirpc.ResourceMonitor/RegisterResource',
requestStream: false,
responseStream: false,
requestType: resource_pb.RegisterResourceRequest,
responseType: resource_pb.RegisterResourceResponse,
requestSerialize: serialize_pulumirpc_RegisterResourceRequest,
requestDeserialize: deserialize_pulumirpc_RegisterResourceRequest,
responseSerialize: serialize_pulumirpc_RegisterResourceResponse,
responseDeserialize: deserialize_pulumirpc_RegisterResourceResponse,
},
registerResourceOutputs: {
path: '/pulumirpc.ResourceMonitor/RegisterResourceOutputs',
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
requestStream: false,
responseStream: false,
requestType: resource_pb.RegisterResourceOutputsRequest,
responseType: google_protobuf_empty_pb.Empty,
requestSerialize: serialize_pulumirpc_RegisterResourceOutputsRequest,
requestDeserialize: deserialize_pulumirpc_RegisterResourceOutputsRequest,
responseSerialize: serialize_google_protobuf_Empty,
responseDeserialize: deserialize_google_protobuf_Empty,
Implement initial Lumi-as-a-library This is the initial step towards redefining Lumi as a library that runs atop vanilla Node.js/V8, rather than as its own runtime. This change is woefully incomplete but this includes some of the more stable pieces of my current work-in-progress. The new structure is that within the sdk/ directory we will have a client library per language. This client library contains the object model for Lumi (resources, properties, assets, config, etc), in addition to the "language runtime host" components required to interoperate with the Lumi resource monitor. This resource monitor is effectively what we call "Lumi" today, in that it's the thing orchestrating plans and deployments. Inside the sdk/ directory, you will find nodejs/, the Node.js client library, alongside proto/, the definitions for RPC interop between the different pieces of the system. This includes existing RPC definitions for resource providers, etc., in addition to the new ones for hosting different language runtimes from within Lumi. These new interfaces are surprisingly simple. There is effectively a bidirectional RPC channel between the Lumi resource monitor, represented by the lumirpc.ResourceMonitor interface, and each language runtime, represented by the lumirpc.LanguageRuntime interface. The overall orchestration goes as follows: 1) Lumi decides it needs to run a program written in language X, so it dynamically loads the language runtime plugin for language X. 2) Lumi passes that runtime a loopback address to its ResourceMonitor service, while language X will publish a connection back to its LanguageRuntime service, which Lumi will talk to. 3) Lumi then invokes LanguageRuntime.Run, passing information like the desired working directory, program name, arguments, and optional configuration variables to make available to the program. 4) The language X runtime receives this, unpacks it and sets up the necessary context, and then invokes the program. The program then calls into Lumi object model abstractions that internally communicate back to Lumi using the ResourceMonitor interface. 5) The key here is ResourceMonitor.NewResource, which Lumi uses to serialize state about newly allocated resources. Lumi receives these and registers them as part of the plan, doing the usual diffing, etc., to decide how to proceed. This interface is perhaps one of the most subtle parts of the new design, as it necessitates the use of promises internally to allow parallel evaluation of the resource plan, letting dataflow determine the available concurrency. 6) The program exits, and Lumi continues on its merry way. If the program fails, the RunResponse will include information about the failure. Due to (5), all properties on resources are now instances of a new Property<T> type. A Property<T> is just a thin wrapper over a T, but it encodes the special properties of Lumi resource properties. Namely, it is possible to create one out of a T, other Property<T>, Promise<T>, or to freshly allocate one. In all cases, the Property<T> does not "settle" until its final state is known. This cannot occur before the deployment actually completes, and so in general it's not safe to depend on concrete resolutions of values (unlike ordinary Promise<T>s which are usually expected to resolve). As a result, all derived computations are meant to use the `then` function (as in `someValue.then(v => v+x)`). Although this change includes tests that may be run in isolation to test the various RPC interactions, we are nowhere near finished. The remaining work primarily boils down to three things: 1) Wiring all of this up to the Lumi code. 2) Fixing the handful of known loose ends required to make this work, primarily around the serialization of properties (waiting on unresolved ones, serializing assets properly, etc). 3) Implementing lambda closure serialization as a native extension. This ongoing work is part of pulumi/pulumi-fabric#311.
2017-08-26 21:07:54 +02:00
},
};
exports.ResourceMonitorClient = grpc.makeGenericClientConstructor(ResourceMonitorService);