pulumi/pkg/backend/display/rows.go

513 lines
14 KiB
Go
Raw Normal View History

2018-05-22 21:43:36 +02:00
// Copyright 2016-2018, Pulumi Corporation.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package display
import (
"bytes"
"fmt"
"io"
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
"sort"
2018-04-17 08:41:00 +02:00
"strings"
"github.com/dustin/go-humanize/english"
2019-06-11 00:20:44 +02:00
"github.com/pulumi/pulumi/pkg/apitype"
"github.com/pulumi/pulumi/pkg/diag"
"github.com/pulumi/pulumi/pkg/diag/colors"
"github.com/pulumi/pulumi/pkg/engine"
"github.com/pulumi/pulumi/pkg/resource"
"github.com/pulumi/pulumi/pkg/resource/deploy"
2019-06-11 00:20:44 +02:00
"github.com/pulumi/pulumi/pkg/util/contract"
)
type Row interface {
DisplayOrderIndex() int
SetDisplayOrderIndex(index int)
ColorizedColumns() []string
ColorizedSuffix() string
HideRowIfUnnecessary() bool
SetHideRowIfUnnecessary(value bool)
}
type ResourceRow interface {
Row
Step() engine.StepEventMetadata
SetStep(step engine.StepEventMetadata)
AddOutputStep(step engine.StepEventMetadata)
// The tick we were on when we created this row. Purely used for generating an
// ellipses to show progress for in-flight resources.
Tick() int
IsDone() bool
SetFailed()
DiagInfo() *DiagInfo
RecordDiagEvent(diagEvent engine.Event)
2019-06-11 00:20:44 +02:00
RecordPolicyViolationEvent(diagEvent engine.Event)
}
// Implementation of a Row, used for the header of the grid.
type headerRowData struct {
2018-04-17 08:41:00 +02:00
display *ProgressDisplay
columns []string
}
func (data *headerRowData) HideRowIfUnnecessary() bool {
return false
}
func (data *headerRowData) SetHideRowIfUnnecessary(value bool) {
}
func (data *headerRowData) DisplayOrderIndex() int {
// sort the header before all other rows
return -1
}
func (data *headerRowData) SetDisplayOrderIndex(time int) {
// Nothing to do here. Header is always at the same index.
}
func (data *headerRowData) ColorizedColumns() []string {
if len(data.columns) == 0 {
blue := func(msg string) string {
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
return colors.Underline + colors.BrightBlue + msg + colors.Reset
}
header := func(msg string) string {
return blue(msg)
}
2018-04-17 04:46:57 +02:00
var statusColumn string
if data.display.isPreview {
statusColumn = header("Plan")
} else {
statusColumn = header("Status")
}
data.columns = []string{"", header("Type"), header("Name"), statusColumn, header("Info")}
}
return data.columns
}
func (data *headerRowData) ColorizedSuffix() string {
return ""
}
// Implementation of a row used for all the resource rows in the grid.
type resourceRowData struct {
displayOrderIndex int
display *ProgressDisplay
// The change that the engine wants apply to that resource.
step engine.StepEventMetadata
outputSteps []engine.StepEventMetadata
// The tick we were on when we created this row. Purely used for generating an
// ellipses to show progress for in-flight resources.
tick int
// If we failed this operation for any reason.
failed bool
diagInfo *DiagInfo
// If this row should be hidden by default. We will hide unless we have any child nodes
// we need to show.
hideRowIfUnnecessary bool
}
func (data *resourceRowData) DisplayOrderIndex() int {
// sort the header before all other rows
return data.displayOrderIndex
}
func (data *resourceRowData) SetDisplayOrderIndex(index int) {
// only set this if it's the first time.
if data.displayOrderIndex == 0 {
data.displayOrderIndex = index
}
}
func (data *resourceRowData) HideRowIfUnnecessary() bool {
return data.hideRowIfUnnecessary
}
func (data *resourceRowData) SetHideRowIfUnnecessary(value bool) {
data.hideRowIfUnnecessary = value
}
func (data *resourceRowData) Step() engine.StepEventMetadata {
return data.step
}
func (data *resourceRowData) SetStep(step engine.StepEventMetadata) {
data.step = step
}
func (data *resourceRowData) AddOutputStep(step engine.StepEventMetadata) {
data.outputSteps = append(data.outputSteps, step)
}
func (data *resourceRowData) Tick() int {
return data.tick
}
func (data *resourceRowData) Failed() bool {
return data.failed
}
func (data *resourceRowData) SetFailed() {
data.failed = true
}
func (data *resourceRowData) DiagInfo() *DiagInfo {
return data.diagInfo
}
func (data *resourceRowData) RecordDiagEvent(event engine.Event) {
payload := event.Payload.(engine.DiagEventPayload)
2019-06-11 00:20:44 +02:00
data.recordDiagEventPayload(payload)
}
2019-06-11 00:20:44 +02:00
func (data *resourceRowData) recordDiagEventPayload(payload engine.DiagEventPayload) {
diagInfo := data.diagInfo
diagInfo.LastDiag = &payload
if payload.Severity == diag.Error {
diagInfo.LastError = &payload
}
if diagInfo.StreamIDToDiagPayloads == nil {
diagInfo.StreamIDToDiagPayloads = make(map[int32][]engine.DiagEventPayload)
}
payloads := diagInfo.StreamIDToDiagPayloads[payload.StreamID]
payloads = append(payloads, payload)
diagInfo.StreamIDToDiagPayloads[payload.StreamID] = payloads
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
if !payload.Ephemeral {
switch payload.Severity {
case diag.Error:
diagInfo.ErrorCount++
case diag.Warning:
diagInfo.WarningCount++
case diag.Infoerr:
diagInfo.InfoCount++
case diag.Info:
diagInfo.InfoCount++
case diag.Debug:
diagInfo.DebugCount++
}
}
}
2019-06-11 00:20:44 +02:00
func (data *resourceRowData) RecordPolicyViolationEvent(event engine.Event) {
//
// NOTE: The display code only understands DiagEvents. We convert the policy violation events
// accordingly so they can be displayed.
//
pePayload := event.Payload.(engine.PolicyViolationEventPayload)
payload := engine.DiagEventPayload{
2019-06-14 01:14:48 +02:00
URN: pePayload.ResourceURN,
2019-06-11 00:20:44 +02:00
Prefix: pePayload.Prefix,
Message: pePayload.Message,
Color: pePayload.Color}
switch pePayload.EnforcementLevel {
case apitype.Mandatory:
payload.Severity = diag.Error
case apitype.Advisory:
2019-06-11 00:20:44 +02:00
payload.Severity = diag.Warning
default:
contract.Failf("Unknown enforcement level %q", pePayload.EnforcementLevel)
}
data.recordDiagEventPayload(payload)
}
type column int
const (
opColumn column = 0
typeColumn column = 1
nameColumn column = 2
statusColumn column = 3
infoColumn column = 4
)
func (data *resourceRowData) IsDone() bool {
if data.failed {
// consider a failed resource 'done'.
return true
}
if data.display.done {
// if the display is done, then we're definitely done.
return true
}
if isRootStack(data.step) {
// the root stack only becomes 'done' once the program has completed (i.e. the condition
// checked just above this). If the program is not finished, then always show the root
// stack as not done so the user sees "running..." presented for it.
return false
}
// We're done if we have the output-step for whatever step operation we're performing
return data.ContainsOutputsStep(data.step.Op)
}
func (data *resourceRowData) ContainsOutputsStep(op deploy.StepOp) bool {
for _, s := range data.outputSteps {
if s.Op == op {
return true
}
}
return false
}
func (data *resourceRowData) ColorizedSuffix() string {
if !data.IsDone() && data.display.isTerminal {
op := data.display.getStepOp(data.step)
if op != deploy.OpSame || isRootURN(data.step.URN) {
suffixes := data.display.suffixesArray
ellipses := suffixes[(data.tick+data.display.currentTick)%len(suffixes)]
return op.Color() + ellipses + colors.Reset
}
}
return ""
}
func (data *resourceRowData) ColorizedColumns() []string {
step := data.step
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
urn := data.step.URN
if urn == "" {
// If we don't have a URN yet, mock parent it to the global stack.
urn = resource.DefaultRootStackURN(data.display.stack, data.display.proj)
}
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
name := string(urn.Name())
typ := simplifyTypeName(urn.Type())
columns := make([]string, 5)
columns[opColumn] = data.display.getStepOpLabel(step)
columns[typeColumn] = typ
columns[nameColumn] = name
diagInfo := data.diagInfo
if data.IsDone() {
failed := data.failed || diagInfo.ErrorCount > 0
columns[statusColumn] = data.display.getStepDoneDescription(step, failed)
} else {
columns[statusColumn] = data.display.getStepInProgressDescription(step)
}
columns[infoColumn] = data.getInfoColumn()
return columns
}
func (data *resourceRowData) getInfoColumn() string {
step := data.step
switch step.Op {
case deploy.OpCreateReplacement, deploy.OpDeleteReplaced:
// if we're doing a replacement, see if we can find a replace step that contains useful
// information to display.
for _, outputStep := range data.outputSteps {
if outputStep.Op == deploy.OpReplace {
step = outputStep
}
}
case deploy.OpImport, deploy.OpImportReplacement:
// If we're doing an import, see if we have the imported state to diff.
for _, outputStep := range data.outputSteps {
if outputStep.Op == step.Op {
step = outputStep
}
}
}
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
var diagMsg string
appendDiagMessage := func(msg string) {
if diagMsg != "" {
diagMsg += "; "
}
diagMsg += msg
}
changes := getDiffInfo(step)
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
if colors.Never.Colorize(changes) != "" {
appendDiagMessage("[" + changes + "]")
}
diagInfo := data.diagInfo
if data.display.done {
// If we are done, show a summary of how many messages were printed.
if c := diagInfo.ErrorCount; c > 0 {
appendDiagMessage(fmt.Sprintf("%d %s%s%s",
c, colors.SpecError, english.PluralWord(c, "error", ""), colors.Reset))
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
}
if c := diagInfo.WarningCount; c > 0 {
appendDiagMessage(fmt.Sprintf("%d %s%s%s",
c, colors.SpecWarning, english.PluralWord(c, "warning", ""), colors.Reset))
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
}
if c := diagInfo.InfoCount; c > 0 {
appendDiagMessage(fmt.Sprintf("%d %s%s%s",
c, colors.SpecInfo, english.PluralWord(c, "message", ""), colors.Reset))
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
}
if c := diagInfo.DebugCount; c > 0 {
appendDiagMessage(fmt.Sprintf("%d %s%s%s",
c, colors.SpecDebug, english.PluralWord(c, "debug", ""), colors.Reset))
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
}
} else {
// If we're not totally done, and we're in the tree-view, just print out the last error (if
// there is one) next to the status message. This is helpful for long running tasks to know
// something bad has happened. However, once done, we print the diagnostics at the bottom, so we don't
// need to show this.
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
//
// if we're not in the tree-view (i.e. non-interactive mode), then we want to print out
// whatever the last diagnostics was that we got. This way, as we're hearing about
// diagnostic events, we're always printing out the last one.
diagnostic := data.diagInfo.LastDiag
if data.display.isTerminal && data.diagInfo.LastError != nil {
diagnostic = data.diagInfo.LastError
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
}
if diagnostic != nil {
eventMsg := data.display.renderProgressDiagEvent(*diagnostic, true /*includePrefix:*/)
if eventMsg != "" {
appendDiagMessage(eventMsg)
}
}
}
newLineIndex := strings.Index(diagMsg, "\n")
if newLineIndex >= 0 {
diagMsg = diagMsg[0:newLineIndex]
}
return diagMsg
}
func getDiffInfo(step engine.StepEventMetadata) string {
diffOutputs := step.Op == deploy.OpRefresh
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
changesBuf := &bytes.Buffer{}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 02:50:29 +02:00
if step.Old != nil && step.New != nil {
var diff *resource.ObjectDiff
Defer all diffs to resource providers. (#2849) Thse changes make a subtle but critical adjustment to the process the Pulumi engine uses to determine whether or not a difference exists between a resource's actual and desired states, and adjusts the way this difference is calculated and displayed accordingly. Today, the Pulumi engine get the first chance to decide whether or not there is a difference between a resource's actual and desired states. It does this by comparing the current set of inputs for a resource (i.e. the inputs from the running Pulumi program) with the last set of inputs used to update the resource. If there is no difference between the old and new inputs, the engine decides that no change is necessary without consulting the resource's provider. Only if there are changes does the engine consult the resource's provider for more information about the difference. This can be problematic for a number of reasons: - Not all providers do input-input comparison; some do input-state comparison - Not all providers are able to update the last deployed set of inputs when performing a refresh - Some providers--either intentionally or due to bugs--may see changes in resources whose inputs have not changed All of these situations are confusing at the very least, and the first is problematic with respect to correctness. Furthermore, the display code only renders diffs it observes rather than rendering the diffs observed by the provider, which can obscure the actual changes detected at runtime. These changes address both of these issues: - Rather than comparing the current inputs against the last inputs before calling a resource provider's Diff function, the engine calls the Diff function in all cases. - Providers may now return a list of properties that differ between the requested and actual state and the way in which they differ. This information will then be used by the CLI to render the diff appropriately. A provider may also indicate that a particular diff is between old and new inputs rather than old state and new inputs. Fixes #2453.
2019-07-01 21:34:19 +02:00
if step.DetailedDiff != nil {
diff = translateDetailedDiff(step)
} else if diffOutputs {
if step.Old.Outputs != nil && step.New.Outputs != nil {
diff = step.Old.Outputs.Diff(step.New.Outputs)
}
} else if step.Old.Inputs != nil && step.New.Inputs != nil {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 02:50:29 +02:00
diff = step.Old.Inputs.Diff(step.New.Inputs)
}
// Show a diff if either `provider` or `protect` changed; they might not show a diff via inputs or outputs, but
// it is still useful to show that these changed in output.
recordMetadataDiff := func(name string, old, new resource.PropertyValue) {
if old != new {
if diff == nil {
diff = &resource.ObjectDiff{
Adds: make(resource.PropertyMap),
Deletes: make(resource.PropertyMap),
Sames: make(resource.PropertyMap),
Updates: make(map[resource.PropertyKey]resource.ValueDiff),
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 02:50:29 +02:00
}
diff.Updates[resource.PropertyKey(name)] = resource.ValueDiff{Old: old, New: new}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 02:50:29 +02:00
}
}
recordMetadataDiff("provider",
resource.NewStringProperty(step.Old.Provider), resource.NewStringProperty(step.New.Provider))
recordMetadataDiff("protect",
resource.NewBoolProperty(step.Old.Protect), resource.NewBoolProperty(step.New.Protect))
if diff != nil {
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
writeString(changesBuf, "diff: ")
updates := make(resource.PropertyMap)
for k := range diff.Updates {
updates[k] = resource.PropertyValue{}
}
filteredKeys := func(m resource.PropertyMap) []string {
keys := make([]string, 0, len(m))
for k := range m {
keys = append(keys, string(k))
}
return keys
}
if include := step.Diffs; include != nil {
includeSet := make(map[resource.PropertyKey]bool)
for _, k := range include {
includeSet[k] = true
}
filteredKeys = func(m resource.PropertyMap) []string {
var filteredKeys []string
for k := range m {
if includeSet[k] {
filteredKeys = append(filteredKeys, string(k))
}
}
return filteredKeys
}
}
writePropertyKeys(changesBuf, filteredKeys(diff.Adds), deploy.OpCreate)
writePropertyKeys(changesBuf, filteredKeys(diff.Deletes), deploy.OpDelete)
writePropertyKeys(changesBuf, filteredKeys(updates), deploy.OpUpdate)
}
}
fprintIgnoreError(changesBuf, colors.Reset)
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
return changesBuf.String()
}
func writePropertyKeys(b io.StringWriter, keys []string, op deploy.StepOp) {
if len(keys) > 0 {
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
writeString(b, strings.Trim(op.Prefix(), " "))
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
sort.Strings(keys)
for index, k := range keys {
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
if index != 0 {
writeString(b, ",")
}
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
writeString(b, k)
}
Make a smattering of CLI UX improvements Since I was digging around over the weekend after the change to move away from light black, and the impact it had on less important information showing more prominently than it used to, I took a step back and did a deeper tidying up of things. Another side goal of this exercise was to be a little more respectful of terminal width; when we could say things with fewer words, I did so. * Stylize the preview/update summary differently, so that it stands out as a section. Also highlight the total changes with bold -- it turns out this has a similar effect to the bright white colorization, just without the negative effects on e.g. white terminals. * Eliminate some verbosity in the phrasing of change summaries. * Make all heading sections stylized consistently. This includes the color (bright magenta) and the vertical spacing (always a newline separating headings). We were previously inconsistent on this (e.g., outputs were under "---outputs---"). Now the headings are: Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink. * Fix an issue where we'd parent things to "global" until the stack object later showed up. Now we'll simply mock up a stack resource. * Don't show messages like "no change" or "unchanged". Prior to the light black removal, these faded into the background of the terminal. Now they just clutter up the display. Similar to the elision of "*" for OpSames in a prior commit, just leave these out. Now anything that's written is actually a meaningful status for the user to note. * Don't show the "3 info messages," etc. summaries in the Info column while an update is ongoing. Instead, just show the latest line. This is more respectful of width -- I often find that the important messages scroll off the right of my screen before this change. For discussion: - I actually wonder if we should eliminate the summary altogether and always just show the latest line. Or even blank it out. The summary feels better suited for the Diagnostics section, and the Status concisely tells us how a resource's update ended up (failed, succeeded, etc). - Similarly, I question the idea of showing only the "worst" message. I'd vote for always showing the latest, and again leaving it to the Status column for concisely telling the user about the final state a resource ended up in. * Stop prepending "info: " to every stdout/stderr message. It adds no value, clutters up the display, and worsens horizontal usage. * Lessen the verbosity of update headline messages, so we now instead of e.g. "Previewing update of stack 'x':", we just say "Previewing update (x):". * Eliminate vertical whitespace in the Diagnostics section. Every independent console.out previously was separated by an entire newline, which made the section look cluttered to my eyes. These are just streams of logs, there's no reason for the extra newlines. * Colorize the resource headers in the Diagnostic section light blue. Note that this will change various test baselines, which I will update next. I didn't want those in the same commit.
2018-09-24 17:31:19 +02:00
writeString(b, colors.Reset)
2018-04-17 08:41:00 +02:00
}
}