2017-06-26 23:46:34 +02:00
|
|
|
// Copyright 2016-2017, Pulumi Corporation. All rights reserved.
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
|
|
|
|
package workspace
|
|
|
|
|
|
|
|
import (
|
2018-02-21 06:05:57 +01:00
|
|
|
"crypto/sha1"
|
|
|
|
"encoding/hex"
|
2017-10-25 19:20:08 +02:00
|
|
|
"encoding/json"
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
"io/ioutil"
|
|
|
|
"os"
|
2018-02-21 06:05:57 +01:00
|
|
|
"os/user"
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
"path/filepath"
|
|
|
|
"strings"
|
|
|
|
|
2017-10-29 02:07:03 +01:00
|
|
|
"github.com/pkg/errors"
|
Suport workspace local configuration and use it by default
Previously, we stored configuration information in the Pulumi.yaml
file. This was a change from the old model where configuration was
stored in a special section of the checkpoint file.
While doing things this way has some upsides with being able to flow
configuration changes with your source code (e.g. fixed values for a
production stack that version with the code) it caused some friction
for the local development scinerio. In this case, setting
configuration values would pend changes to Pulumi.yaml and if you
didn't want to publish these changes, you'd have to remember to remove
them before commiting. It also was problematic for our examples, where
it was not clear if we wanted to actually include values like
`aws:config:region` in our samples. Finally, we found that for our
own pulumi service, we'd have values that would differ across each
individual dev stack, and publishing these values to a global
Pulumi.yaml file would just be adding noise to things.
We now adopt a hybrid model, where by default configuration is stored
locally, in the workspace's settings per project. A new flag `--save`
tests commands to actual operate on the configuration information
stored in Pulumi.yaml.
With the following change, we have have four "slots" configuration
values can end up in:
1. In the Pulumi.yaml file, applies to all stacks
2. In the Pulumi.yaml file, applied to a specific stack
3. In the local workspace.json file, applied to all stacks
4. In the local workspace.json file, applied to a specific stack
When computing the configuration information for a stack, we apply
configuration in the above order, overriding values as we go
along.
We also invert the default behavior of the `pulumi config` commands so
they operate on a specific stack (i.e. how they did before
e3610989). If you want to apply configuration to all stacks, `--all`
can be passed to any configuration command.
2017-10-27 23:24:47 +02:00
|
|
|
"github.com/pulumi/pulumi/pkg/resource/config"
|
2017-09-22 04:18:21 +02:00
|
|
|
"github.com/pulumi/pulumi/pkg/tokens"
|
2018-02-21 06:05:57 +01:00
|
|
|
"github.com/pulumi/pulumi/pkg/util/contract"
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
)
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
// W offers functionality for interacting with Pulumi workspaces.
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
type W interface {
|
2018-01-25 03:22:41 +01:00
|
|
|
Settings() *Settings // returns a mutable pointer to the optional workspace settings info.
|
|
|
|
Repository() *Repository // returns the repository this project belongs to.
|
|
|
|
StackPath(stack tokens.QName) string // returns the path to store stack information.
|
2018-02-21 06:05:57 +01:00
|
|
|
BackupDirectory() (string, error) // returns the directory to store backup stack files.
|
2018-01-25 03:22:41 +01:00
|
|
|
HistoryDirectory(stack tokens.QName) string // returns the directory to store a stack's history information.
|
|
|
|
Save() error // saves any modifications to the workspace.
|
2017-10-25 19:20:08 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
type projectWorkspace struct {
|
2018-02-27 00:55:25 +01:00
|
|
|
name tokens.PackageName // the package this workspace is associated with.
|
2017-10-25 19:20:08 +02:00
|
|
|
project string // the path to the Pulumi.[yaml|json] file for this project.
|
|
|
|
settings *Settings // settings for this workspace.
|
|
|
|
repo *Repository // the repo this workspace is associated with.
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
}
|
|
|
|
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// New creates a new workspace using the current working directory.
|
|
|
|
func New() (W, error) {
|
|
|
|
cwd, err := os.Getwd()
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
return NewFrom(cwd)
|
|
|
|
}
|
|
|
|
|
|
|
|
// NewFrom creates a new Pulumi workspace in the given directory. Requires a Pulumi.yaml file be present in the
|
|
|
|
// folder hierarchy between dir and the .pulumi folder.
|
|
|
|
func NewFrom(dir string) (W, error) {
|
2017-10-25 19:20:08 +02:00
|
|
|
repo, err := GetRepository(dir)
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
2018-02-14 22:56:16 +01:00
|
|
|
path, err := DetectProjectPathFrom(dir)
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
2018-02-14 22:56:16 +01:00
|
|
|
} else if path == "" {
|
|
|
|
return nil, errors.New("no Pulumi.yaml project file found")
|
2017-10-29 02:07:03 +01:00
|
|
|
}
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
|
2018-02-14 22:56:16 +01:00
|
|
|
proj, err := LoadProject(path)
|
2017-10-25 19:20:08 +02:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
}
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
w := projectWorkspace{
|
2018-02-14 22:56:16 +01:00
|
|
|
name: proj.Name,
|
|
|
|
project: path,
|
|
|
|
repo: repo,
|
|
|
|
}
|
2017-10-25 19:20:08 +02:00
|
|
|
|
|
|
|
err = w.readSettings()
|
|
|
|
if err != nil {
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
2018-02-27 00:55:25 +01:00
|
|
|
if w.settings.ConfigDeprecated == nil {
|
|
|
|
w.settings.ConfigDeprecated = make(map[tokens.QName]config.Map)
|
Suport workspace local configuration and use it by default
Previously, we stored configuration information in the Pulumi.yaml
file. This was a change from the old model where configuration was
stored in a special section of the checkpoint file.
While doing things this way has some upsides with being able to flow
configuration changes with your source code (e.g. fixed values for a
production stack that version with the code) it caused some friction
for the local development scinerio. In this case, setting
configuration values would pend changes to Pulumi.yaml and if you
didn't want to publish these changes, you'd have to remember to remove
them before commiting. It also was problematic for our examples, where
it was not clear if we wanted to actually include values like
`aws:config:region` in our samples. Finally, we found that for our
own pulumi service, we'd have values that would differ across each
individual dev stack, and publishing these values to a global
Pulumi.yaml file would just be adding noise to things.
We now adopt a hybrid model, where by default configuration is stored
locally, in the workspace's settings per project. A new flag `--save`
tests commands to actual operate on the configuration information
stored in Pulumi.yaml.
With the following change, we have have four "slots" configuration
values can end up in:
1. In the Pulumi.yaml file, applies to all stacks
2. In the Pulumi.yaml file, applied to a specific stack
3. In the local workspace.json file, applied to all stacks
4. In the local workspace.json file, applied to a specific stack
When computing the configuration information for a stack, we apply
configuration in the above order, overriding values as we go
along.
We also invert the default behavior of the `pulumi config` commands so
they operate on a specific stack (i.e. how they did before
e3610989). If you want to apply configuration to all stacks, `--all`
can be passed to any configuration command.
2017-10-27 23:24:47 +02:00
|
|
|
}
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
return &w, nil
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
}
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
func (pw *projectWorkspace) Settings() *Settings {
|
|
|
|
return pw.settings
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
}
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
func (pw *projectWorkspace) Repository() *Repository {
|
|
|
|
return pw.repo
|
|
|
|
}
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
func (pw *projectWorkspace) Save() error {
|
Suport workspace local configuration and use it by default
Previously, we stored configuration information in the Pulumi.yaml
file. This was a change from the old model where configuration was
stored in a special section of the checkpoint file.
While doing things this way has some upsides with being able to flow
configuration changes with your source code (e.g. fixed values for a
production stack that version with the code) it caused some friction
for the local development scinerio. In this case, setting
configuration values would pend changes to Pulumi.yaml and if you
didn't want to publish these changes, you'd have to remember to remove
them before commiting. It also was problematic for our examples, where
it was not clear if we wanted to actually include values like
`aws:config:region` in our samples. Finally, we found that for our
own pulumi service, we'd have values that would differ across each
individual dev stack, and publishing these values to a global
Pulumi.yaml file would just be adding noise to things.
We now adopt a hybrid model, where by default configuration is stored
locally, in the workspace's settings per project. A new flag `--save`
tests commands to actual operate on the configuration information
stored in Pulumi.yaml.
With the following change, we have have four "slots" configuration
values can end up in:
1. In the Pulumi.yaml file, applies to all stacks
2. In the Pulumi.yaml file, applied to a specific stack
3. In the local workspace.json file, applied to all stacks
4. In the local workspace.json file, applied to a specific stack
When computing the configuration information for a stack, we apply
configuration in the above order, overriding values as we go
along.
We also invert the default behavior of the `pulumi config` commands so
they operate on a specific stack (i.e. how they did before
e3610989). If you want to apply configuration to all stacks, `--all`
can be passed to any configuration command.
2017-10-27 23:24:47 +02:00
|
|
|
// let's remove all the empty entries from the config array
|
2018-02-27 00:55:25 +01:00
|
|
|
for k, v := range pw.settings.ConfigDeprecated {
|
Suport workspace local configuration and use it by default
Previously, we stored configuration information in the Pulumi.yaml
file. This was a change from the old model where configuration was
stored in a special section of the checkpoint file.
While doing things this way has some upsides with being able to flow
configuration changes with your source code (e.g. fixed values for a
production stack that version with the code) it caused some friction
for the local development scinerio. In this case, setting
configuration values would pend changes to Pulumi.yaml and if you
didn't want to publish these changes, you'd have to remember to remove
them before commiting. It also was problematic for our examples, where
it was not clear if we wanted to actually include values like
`aws:config:region` in our samples. Finally, we found that for our
own pulumi service, we'd have values that would differ across each
individual dev stack, and publishing these values to a global
Pulumi.yaml file would just be adding noise to things.
We now adopt a hybrid model, where by default configuration is stored
locally, in the workspace's settings per project. A new flag `--save`
tests commands to actual operate on the configuration information
stored in Pulumi.yaml.
With the following change, we have have four "slots" configuration
values can end up in:
1. In the Pulumi.yaml file, applies to all stacks
2. In the Pulumi.yaml file, applied to a specific stack
3. In the local workspace.json file, applied to all stacks
4. In the local workspace.json file, applied to a specific stack
When computing the configuration information for a stack, we apply
configuration in the above order, overriding values as we go
along.
We also invert the default behavior of the `pulumi config` commands so
they operate on a specific stack (i.e. how they did before
e3610989). If you want to apply configuration to all stacks, `--all`
can be passed to any configuration command.
2017-10-27 23:24:47 +02:00
|
|
|
if len(v) == 0 {
|
2018-02-27 00:55:25 +01:00
|
|
|
delete(pw.settings.ConfigDeprecated, k)
|
Suport workspace local configuration and use it by default
Previously, we stored configuration information in the Pulumi.yaml
file. This was a change from the old model where configuration was
stored in a special section of the checkpoint file.
While doing things this way has some upsides with being able to flow
configuration changes with your source code (e.g. fixed values for a
production stack that version with the code) it caused some friction
for the local development scinerio. In this case, setting
configuration values would pend changes to Pulumi.yaml and if you
didn't want to publish these changes, you'd have to remember to remove
them before commiting. It also was problematic for our examples, where
it was not clear if we wanted to actually include values like
`aws:config:region` in our samples. Finally, we found that for our
own pulumi service, we'd have values that would differ across each
individual dev stack, and publishing these values to a global
Pulumi.yaml file would just be adding noise to things.
We now adopt a hybrid model, where by default configuration is stored
locally, in the workspace's settings per project. A new flag `--save`
tests commands to actual operate on the configuration information
stored in Pulumi.yaml.
With the following change, we have have four "slots" configuration
values can end up in:
1. In the Pulumi.yaml file, applies to all stacks
2. In the Pulumi.yaml file, applied to a specific stack
3. In the local workspace.json file, applied to all stacks
4. In the local workspace.json file, applied to a specific stack
When computing the configuration information for a stack, we apply
configuration in the above order, overriding values as we go
along.
We also invert the default behavior of the `pulumi config` commands so
they operate on a specific stack (i.e. how they did before
e3610989). If you want to apply configuration to all stacks, `--all`
can be passed to any configuration command.
2017-10-27 23:24:47 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
settingsFile := pw.settingsPath()
|
Implement dependency versions
This change implements dependency versions, including semantic analysis, per the
checkin https://github.com/marapongo/mu/commit/83030685c3b8a3dbe96bd10ab055f029667a96b0.
There's quite a bit in here but at a top-level this parses and validates dependency
references of the form
[[proto://]base.url]namespace/.../name[@version]
and verifies that the components are correct, as well as binding them to symbols.
These references can appear in two places at the moment:
* Service types.
* Cluster dependencies.
As part of this change, a number of supporting changes have been made:
* Parse Workspaces using a full-blown parser, parser analysis, and semantic analysis.
This allows us to share logic around the validation of common AST types. This also
moves some of the logic around loading workspace.yaml files back to the parser, where
it can be unified with the way we load Mu.yaml files.
* New ast.Version and ast.VersionSpec types. The former represents a precise version
-- either a specific semantic version or a short or long Git SHA hash -- and the
latter represents a range -- either a Version, "latest", or a semantic range.
* New ast.Ref and ast.RefParts types. The former is an unparsed string that is
thought to contain a Ref, while the latter is a validated Ref that has been parsed
into its components (Proto, Base, Name, and Version).
* Added some type assertions to ensure certain structs implement certain interfaces,
to speed up finding errors. (And remove the coercions that zero-fill vtbl slots.)
* Be consistent about prefixing error types with Error or Warning.
* Organize the core compiler driver's logic into three methods, FE, sema, and BE.
* A bunch of tests for some of the above ... more to come in an upcoming change.
2016-11-23 01:58:23 +01:00
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
// ensure the path exists
|
|
|
|
err := os.MkdirAll(filepath.Dir(settingsFile), 0700)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
|
2018-01-19 01:42:39 +01:00
|
|
|
b, err := json.MarshalIndent(pw.settings, "", " ")
|
2017-10-25 19:20:08 +02:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
Add basic targeting capability
This change partially implements pulumi/coconut#94, by adding the
ability to name targets during creation and reuse those names during
deletion and update. This simplifies the management of deployment
records, checkpoints, and snapshots.
I've opted to call these things "husks" (perhaps going overboard with
joy after our recent renaming). The basic idea is that for any
executable Nut that will be deployed, you have a nutpack/ directory
whose layout looks roughly as follows:
nutpack/
bin/
Nutpack.json
... any other compiled artifacts ...
husks/
... one snapshot per husk ...
For example, if we had a stage and prod husk, we would have:
nutpack/
bin/...
husks/
prod.json
stage.json
In the prod.json and stage.json files, we'd have the most recent
deployment record for that environment. These would presumably get
checked in and versioned along with the overall Nut, so that we
can use Git history for rollbacks, etc.
The create, update, and delete commands look in the right place for
these files automatically, so you don't need to manually supply them.
2017-02-25 18:24:52 +01:00
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
return ioutil.WriteFile(settingsFile, b, 0600)
|
Implement dependency resolution
This change includes logic to resolve dependencies declared by stacks. The design
is described in https://github.com/marapongo/mu/blob/master/docs/deps.md.
In summary, each stack may declare dependencies, which are name/semver pairs. A
new structure has been introduced, ast.Ref, to distinguish between ast.Names and
dependency names. An ast.Ref includes a protocol, base part, and a name part (the
latter being an ast.Name); for example, in "https://hub.mu.com/mu/container/",
"https://" is the protocol, "hub.mu.com/" is the base, and "mu/container" is the
name. This is used to resolve URL-like names to package manager-like artifacts.
The dependency resolution phase happens after parsing, but before semantic analysis.
This is because dependencies are "source-like" in that we must load and parse all
dependency metadata files. We stick the full transitive closure of dependencies
into a map attached to the compiler to avoid loading dependencies multiple times.
Note that, although dependencies prohibit cycles, this forms a DAG, meaning multiple
inbound edges to a single stack may come from multiple places.
From there, we rely on ordinary visitation to deal with dependencies further.
This includes inserting symbol entries into the symbol table, mapping names to the
loaded stacks, during the first phase of binding so that they may be found
subsequently when typechecking during the second phase and beyond.
2016-11-21 20:19:25 +01:00
|
|
|
}
|
2016-12-02 23:06:39 +01:00
|
|
|
|
2017-10-28 04:42:17 +02:00
|
|
|
func (pw *projectWorkspace) StackPath(stack tokens.QName) string {
|
2017-10-25 19:20:08 +02:00
|
|
|
path := filepath.Join(pw.Repository().Root, StackDir, pw.name.String())
|
2017-10-28 04:42:17 +02:00
|
|
|
if stack != "" {
|
|
|
|
path = filepath.Join(path, qnamePath(stack)+".json")
|
2017-10-25 19:20:08 +02:00
|
|
|
}
|
|
|
|
return path
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
}
|
|
|
|
|
2018-02-21 06:05:57 +01:00
|
|
|
func (pw *projectWorkspace) BackupDirectory() (string, error) {
|
|
|
|
user, err := user.Current()
|
|
|
|
if user == nil || err != nil {
|
|
|
|
return "", errors.New("failed to get current user")
|
|
|
|
}
|
|
|
|
|
|
|
|
projectDir := filepath.Dir(pw.project)
|
|
|
|
projectBackupDirName := filepath.Base(projectDir) + "-" + sha1HexString(projectDir)
|
|
|
|
|
|
|
|
return filepath.Join(user.HomeDir, BookkeepingDir, BackupDir, projectBackupDirName), nil
|
|
|
|
}
|
|
|
|
|
2018-01-25 03:22:41 +01:00
|
|
|
func (pw *projectWorkspace) HistoryDirectory(stack tokens.QName) string {
|
|
|
|
path := filepath.Join(pw.Repository().Root, HistoryDir, pw.name.String())
|
|
|
|
if stack != "" {
|
|
|
|
return filepath.Join(path, qnamePath(stack))
|
|
|
|
}
|
|
|
|
return path
|
|
|
|
}
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
func (pw *projectWorkspace) readSettings() error {
|
|
|
|
settingsPath := pw.settingsPath()
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
b, err := ioutil.ReadFile(settingsPath)
|
|
|
|
if err != nil && os.IsNotExist(err) {
|
|
|
|
// not an error to not have an existing settings file.
|
|
|
|
pw.settings = &Settings{}
|
|
|
|
return nil
|
|
|
|
} else if err != nil {
|
|
|
|
return err
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
}
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
var settings Settings
|
|
|
|
|
|
|
|
err = json.Unmarshal(b, &settings)
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
2017-10-25 19:20:08 +02:00
|
|
|
|
|
|
|
pw.settings = &settings
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
func (pw *projectWorkspace) settingsPath() string {
|
|
|
|
return filepath.Join(pw.Repository().Root, WorkspaceDir, pw.name.String(), WorkspaceFile)
|
|
|
|
}
|
|
|
|
|
2018-02-21 06:05:57 +01:00
|
|
|
// sha1HexString returns a hex string of the sha1 hash of value.
|
|
|
|
func sha1HexString(value string) string {
|
|
|
|
h := sha1.New()
|
|
|
|
_, err := h.Write([]byte(value))
|
|
|
|
contract.AssertNoError(err)
|
|
|
|
return hex.EncodeToString(h.Sum(nil))
|
|
|
|
}
|
|
|
|
|
2018-02-28 00:51:19 +01:00
|
|
|
// qnameFileName takes a qname and cleans it for use as a filename (by replacing tokens.QNameDelimter with a dash)
|
|
|
|
func qnameFileName(nm tokens.QName) string {
|
|
|
|
return strings.Replace(string(nm), tokens.QNameDelimiter, "-", -1)
|
|
|
|
}
|
|
|
|
|
2017-10-25 19:20:08 +02:00
|
|
|
// qnamePath just cleans a name and makes sure it's appropriate to use as a path.
|
|
|
|
func qnamePath(nm tokens.QName) string {
|
|
|
|
return stringNamePath(string(nm))
|
|
|
|
}
|
|
|
|
|
|
|
|
// stringNamePart cleans a string component of a name and makes sure it's appropriate to use as a path.
|
|
|
|
func stringNamePath(nm string) string {
|
|
|
|
return strings.Replace(nm, tokens.QNameDelimiter, string(os.PathSeparator), -1)
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
}
|