Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// Copyright 2016-2017, Pulumi Corporation. All rights reserved.
|
|
|
|
|
|
|
|
// Package backend encapsulates all extensibility points required to fully implement a new cloud provider.
|
|
|
|
package backend
|
|
|
|
|
|
|
|
import (
|
2018-01-05 21:46:13 +01:00
|
|
|
"encoding/json"
|
|
|
|
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
"github.com/pulumi/pulumi/pkg/engine"
|
|
|
|
"github.com/pulumi/pulumi/pkg/operations"
|
2017-12-22 16:38:21 +01:00
|
|
|
"github.com/pulumi/pulumi/pkg/resource/config"
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
"github.com/pulumi/pulumi/pkg/tokens"
|
2018-02-14 22:56:16 +01:00
|
|
|
"github.com/pulumi/pulumi/pkg/workspace"
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
)
|
|
|
|
|
|
|
|
// Backend is an interface that represents actions the engine will interact with to manage stacks of cloud resources.
|
|
|
|
// It can be implemented any number of ways to provide pluggable backend implementations of the Pulumi Cloud.
|
|
|
|
type Backend interface {
|
|
|
|
// Name returns a friendly name for this backend.
|
|
|
|
Name() string
|
|
|
|
|
|
|
|
// GetStack returns a stack object tied to this backend with the given name, or nil if it cannot be found.
|
Make some updates based on CR feedback
This change implements some feedback from @ellismg.
* Make backend.Stack an interface and let backends implement it,
enabling dynamic type testing/casting to access information
specific to that backend. For instance, the cloud.Stack conveys
the cloud URL, org name, and PPC name, for each stack.
* Similarly expose specialized backend.Backend interfaces,
local.Backend and cloud.Backend, to convey specific information.
* Redo a bunch of the commands in terms of these.
* Keeping with this theme, turn the CreateStack options into an
opaque interface{}, and let the specific backends expose their
own structures with their own settings (like PPC name in cloud).
* Show both the org and PPC names in the cloud column printed in
the stack ls command, in addition to the Pulumi Cloud URL.
Unrelated, but useful:
* Special case the 401 HTTP response and make a friendly error,
to tell the developer they must use `pulumi login`. This is
better than tossing raw "401: Unauthorized" errors in their face.
* Change the "Updating stack '..' in the Pulumi Cloud" message to
use the correct action verb ("Previewing", "Destroying", etc).
2017-12-03 16:51:18 +01:00
|
|
|
GetStack(name tokens.QName) (Stack, error)
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// CreateStack creates a new stack with the given name and options that are specific to the backend provider.
|
Make some stack-related CLI improvements (#947)
This change includes a handful of stack-related CLI formatting
improvements that I've been noodling on in the background for a while,
based on things that tend to trip up demos and the inner loop workflow.
This includes:
* If `pulumi stack select` is run by itself, use an interactive
CLI menu to let the user select an existing stack, or choose to
create a new one. This looks as follows
$ pulumi stack select
Please choose a stack, or choose to create a new one:
abcdef
babblabblabble
> currentlyselected
defcon
<create a new stack>
and is navigated in the usual way (key up, down, enter).
* If a stack name is passed that does not exist, prompt the user
to ask whether s/he wants to create one on-demand. This hooks
interesting moments in time, like `pulumi stack select foo`,
and cuts down on the need to run additional commands.
* If a current stack is required, but none is currently selected,
then pop the same interactive menu shown above to select one.
Depending on the command being run, we may or may not show the
option to create a new stack (e.g., that doesn't make much sense
when you're running `pulumi destroy`, but might when you're
running `pulumi stack`). This again lets you do with a single
command what would have otherwise entailed an error with multiple
commands to recover from it.
* If you run `pulumi stack init` without any additional arguments,
we interactively prompt for the stack name. Before, we would
error and you'd then need to run `pulumi stack init <name>`.
* Colorize some things nicely; for example, now all prompts will
by default become bright white.
2018-02-17 00:03:54 +01:00
|
|
|
CreateStack(name tokens.QName, opts interface{}) (Stack, error)
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// RemoveStack removes a stack with the given name. If force is true, the stack will be removed even if it
|
|
|
|
// still contains resources. Otherwise, if the stack contains resources, a non-nil error is returned, and the
|
|
|
|
// first boolean return value will be set to true.
|
|
|
|
RemoveStack(name tokens.QName, force bool) (bool, error)
|
|
|
|
// ListStacks returns a list of stack summaries for all known stacks in the target backend.
|
Make some updates based on CR feedback
This change implements some feedback from @ellismg.
* Make backend.Stack an interface and let backends implement it,
enabling dynamic type testing/casting to access information
specific to that backend. For instance, the cloud.Stack conveys
the cloud URL, org name, and PPC name, for each stack.
* Similarly expose specialized backend.Backend interfaces,
local.Backend and cloud.Backend, to convey specific information.
* Redo a bunch of the commands in terms of these.
* Keeping with this theme, turn the CreateStack options into an
opaque interface{}, and let the specific backends expose their
own structures with their own settings (like PPC name in cloud).
* Show both the org and PPC names in the cloud column printed in
the stack ls command, in addition to the Pulumi Cloud URL.
Unrelated, but useful:
* Special case the 401 HTTP response and make a friendly error,
to tell the developer they must use `pulumi login`. This is
better than tossing raw "401: Unauthorized" errors in their face.
* Change the "Updating stack '..' in the Pulumi Cloud" message to
use the correct action verb ("Previewing", "Destroying", etc).
2017-12-03 16:51:18 +01:00
|
|
|
ListStacks() ([]Stack, error)
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
|
2017-12-22 16:38:21 +01:00
|
|
|
// GetStackCrypter returns an encrypter/decrypter for the given stack's secret config values.
|
|
|
|
GetStackCrypter(stack tokens.QName) (config.Crypter, error)
|
|
|
|
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// Preview initiates a preview of the current workspace's contents.
|
2018-02-14 22:56:16 +01:00
|
|
|
Preview(stackName tokens.QName, proj *workspace.Project, root string,
|
2018-01-31 18:41:42 +01:00
|
|
|
debug bool, opts engine.UpdateOptions, displayOpts DisplayOptions) error
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// Update updates the target stack with the current workspace's contents (config and code).
|
2018-02-14 22:56:16 +01:00
|
|
|
Update(stackName tokens.QName, proj *workspace.Project, root string,
|
2018-01-31 18:41:42 +01:00
|
|
|
debug bool, m UpdateMetadata, opts engine.UpdateOptions, displayOpts DisplayOptions) error
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// Destroy destroys all of this stack's resources.
|
2018-02-14 22:56:16 +01:00
|
|
|
Destroy(stackName tokens.QName, proj *workspace.Project, root string,
|
2018-01-31 18:41:42 +01:00
|
|
|
debug bool, m UpdateMetadata, opts engine.UpdateOptions, displayOpts DisplayOptions) error
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
|
2018-01-25 03:22:41 +01:00
|
|
|
// GetHistory returns all updates for the stack. The returned UpdateInfo slice will be in
|
|
|
|
// descending order by Version.
|
|
|
|
GetHistory(stackName tokens.QName) ([]UpdateInfo, error)
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// GetLogs fetches a list of log entries for the given stack, with optional filtering/querying.
|
|
|
|
GetLogs(stackName tokens.QName, query operations.LogQuery) ([]operations.LogEntry, error)
|
2018-01-05 21:46:13 +01:00
|
|
|
|
|
|
|
// ExportDeployment exports the deployment for the given stack as an opaque JSON message.
|
|
|
|
ExportDeployment(stackName tokens.QName) (json.RawMessage, error)
|
|
|
|
// ImportDeployment imports the given deployment into the indicated stack.
|
|
|
|
ImportDeployment(stackName tokens.QName, deployment json.RawMessage) error
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
}
|