2017-06-26 23:46:34 +02:00
|
|
|
// Copyright 2016-2017, Pulumi Corporation. All rights reserved.
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
|
2017-09-22 04:18:21 +02:00
|
|
|
package cmd
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
|
|
|
|
import (
|
2017-09-22 04:18:21 +02:00
|
|
|
"github.com/pulumi/pulumi/pkg/engine"
|
2017-10-03 00:14:55 +02:00
|
|
|
"github.com/pulumi/pulumi/pkg/tokens"
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
"github.com/spf13/cobra"
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
|
2017-09-22 04:18:21 +02:00
|
|
|
"github.com/pulumi/pulumi/pkg/util/cmdutil"
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
)
|
|
|
|
|
2017-03-15 23:40:06 +01:00
|
|
|
func newDestroyCmd() *cobra.Command {
|
2017-07-14 02:09:46 +02:00
|
|
|
var debug bool
|
2017-09-23 02:33:47 +02:00
|
|
|
var preview bool
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
var env string
|
2017-09-17 17:10:46 +02:00
|
|
|
var parallel int
|
2017-02-25 16:55:22 +01:00
|
|
|
var summary bool
|
2017-02-27 22:53:15 +01:00
|
|
|
var yes bool
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
var cmd = &cobra.Command{
|
2017-09-23 00:29:24 +02:00
|
|
|
Use: "destroy",
|
|
|
|
Short: "Destroy an existing environment and its resources",
|
2017-03-06 15:32:39 +01:00
|
|
|
Long: "Destroy an existing environment and its resources\n" +
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
"\n" +
|
2017-03-06 15:32:39 +01:00
|
|
|
"This command deletes an entire existing environment by name. The current state is\n" +
|
|
|
|
"loaded from the associated snapshot file in the workspace. After running to completion,\n" +
|
|
|
|
"all of this environment's resources and associated state will be gone.\n" +
|
Add basic targeting capability
This change partially implements pulumi/coconut#94, by adding the
ability to name targets during creation and reuse those names during
deletion and update. This simplifies the management of deployment
records, checkpoints, and snapshots.
I've opted to call these things "husks" (perhaps going overboard with
joy after our recent renaming). The basic idea is that for any
executable Nut that will be deployed, you have a nutpack/ directory
whose layout looks roughly as follows:
nutpack/
bin/
Nutpack.json
... any other compiled artifacts ...
husks/
... one snapshot per husk ...
For example, if we had a stage and prod husk, we would have:
nutpack/
bin/...
husks/
prod.json
stage.json
In the prod.json and stage.json files, we'd have the most recent
deployment record for that environment. These would presumably get
checked in and versioned along with the overall Nut, so that we
can use Git history for rollbacks, etc.
The create, update, and delete commands look in the right place for
these files automatically, so you don't need to manually supply them.
2017-02-25 18:24:52 +01:00
|
|
|
"\n" +
|
|
|
|
"Warning: although old snapshots can be used to recreate an environment, this command\n" +
|
|
|
|
"is generally irreversable and should be used with great care.",
|
2017-04-12 20:12:25 +02:00
|
|
|
Run: cmdutil.RunFunc(func(cmd *cobra.Command, args []string) error {
|
2017-08-24 00:02:33 +02:00
|
|
|
if env == "" {
|
2017-10-03 00:14:55 +02:00
|
|
|
env = lumiEngine.GetCurrentEnvName().String()
|
2017-08-24 00:02:33 +02:00
|
|
|
}
|
|
|
|
|
2017-09-23 02:33:47 +02:00
|
|
|
if preview || yes ||
|
2017-08-23 01:23:50 +02:00
|
|
|
confirmPrompt("This will permanently destroy all resources in the '%v' environment!", env) {
|
2017-10-03 00:14:55 +02:00
|
|
|
return lumiEngine.Destroy(tokens.QName(env), engine.DestroyOptions{
|
2017-10-02 20:14:27 +02:00
|
|
|
Package: pkgargFromArgs(args),
|
|
|
|
DryRun: preview,
|
|
|
|
Debug: debug,
|
|
|
|
Parallel: parallel,
|
|
|
|
Summary: summary,
|
2017-09-17 17:10:46 +02:00
|
|
|
})
|
2017-02-27 23:13:27 +01:00
|
|
|
}
|
2017-08-23 01:23:50 +02:00
|
|
|
|
2017-03-07 14:47:42 +01:00
|
|
|
return nil
|
|
|
|
}),
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
}
|
|
|
|
|
2017-07-14 02:09:46 +02:00
|
|
|
cmd.PersistentFlags().BoolVarP(
|
|
|
|
&debug, "debug", "d", false,
|
|
|
|
"Print detailed debugging output during resource operations")
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
cmd.PersistentFlags().BoolVarP(
|
2017-09-23 02:33:47 +02:00
|
|
|
&preview, "preview", "n", false,
|
2017-09-23 02:23:40 +02:00
|
|
|
"Don't actually delete resources; just preview the planned deletions")
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
cmd.PersistentFlags().StringVarP(
|
|
|
|
&env, "env", "e", "",
|
|
|
|
"Choose an environment other than the currently selected one")
|
2017-09-17 17:10:46 +02:00
|
|
|
cmd.PersistentFlags().IntVarP(
|
|
|
|
¶llel, "parallel", "p", 0,
|
|
|
|
"Allow P resource operations to run in parallel at once (<=1 for no parallelism)")
|
2017-02-25 16:55:22 +01:00
|
|
|
cmd.PersistentFlags().BoolVarP(
|
|
|
|
&summary, "summary", "s", false,
|
|
|
|
"Only display summarization of resources and plan operations")
|
2017-03-01 01:44:46 +01:00
|
|
|
cmd.PersistentFlags().BoolVar(
|
|
|
|
&yes, "yes", false,
|
2017-03-01 18:57:14 +01:00
|
|
|
"Skip confirmation prompts, and proceed with the destruction anyway")
|
Repivot plan/apply commands; prepare for updates
This change repivots the plan/apply commands slightly. This is largely
in preparation for performing deletes and updates of existing environments.
The old way was slightly confusing and made things appear more "magical"
than they actually are. Namely, different things are needed for different
kinds of deployment operations, and trying to present them each underneath
a single pair of CLI commands just leads to weird modality and options.
The new way is to offer three commands: create, update, and delete. Each
does what it says on the tin: create provisions a new environment, update
makes resource updates to an existing one, and delete tears down an existing
one entirely. The arguments are what make this interesting: create demands
a MuPackage to evaluate (producing the new desired state snapshot), update
takes *both* an existing snapshot file plus a MuPackage to evaluate (producing
the new desired state snapshot to diff against the existing one), and delete
merely takes an existing snapshot file and no MuPackage, since all it must
do is tear down an existing known environment.
Replacing the plan functionality is the --dry-run (-n) flag that may be
passed to any of the above commands. This will print out the plan without
actually performing any opterations.
All commands produce serializable resource files in the MuGL file format,
and attempt to do smart things with respect to backups, etc., to support the
intended "Git-oriented" workflow of the pure CLI dev experience.
2017-02-22 20:21:26 +01:00
|
|
|
|
|
|
|
return cmd
|
|
|
|
}
|