2017-06-26 23:46:34 +02:00
|
|
|
// Copyright 2016-2017, Pulumi Corporation. All rights reserved.
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
|
2017-09-22 04:18:21 +02:00
|
|
|
package cmd
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
|
|
|
|
import (
|
2017-10-03 01:37:12 +02:00
|
|
|
"fmt"
|
|
|
|
|
2017-12-29 01:51:53 +01:00
|
|
|
"github.com/hashicorp/go-multierror"
|
2017-11-01 22:55:16 +01:00
|
|
|
"github.com/pkg/errors"
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
"github.com/spf13/cobra"
|
|
|
|
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
"github.com/pulumi/pulumi/pkg/backend/state"
|
|
|
|
"github.com/pulumi/pulumi/pkg/tokens"
|
2017-09-22 04:18:21 +02:00
|
|
|
"github.com/pulumi/pulumi/pkg/util/cmdutil"
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
)
|
|
|
|
|
2017-10-31 02:28:51 +01:00
|
|
|
// newStackSelectCmd handles both the "local" and "cloud" scenarios in its implementation.
|
2017-10-16 21:04:35 +02:00
|
|
|
func newStackSelectCmd() *cobra.Command {
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
var cloud string
|
|
|
|
cmd := &cobra.Command{
|
|
|
|
Use: "select [<stack-name>]",
|
2017-10-16 21:04:35 +02:00
|
|
|
Short: "Switch the current workspace to the given stack",
|
|
|
|
Long: "Switch the current workspace to the given stack. This allows you to use\n" +
|
2017-09-23 00:15:42 +02:00
|
|
|
"other commands like `config`, `preview`, and `push` without needing to specify the\n" +
|
2017-10-16 21:04:35 +02:00
|
|
|
"stack name each and every time.\n" +
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
"\n" +
|
2017-10-16 21:04:35 +02:00
|
|
|
"If no <stack> argument is supplied, the current stack is printed.",
|
2017-11-29 22:44:06 +01:00
|
|
|
Args: cmdutil.MaximumNArgs(1),
|
2017-04-12 20:12:25 +02:00
|
|
|
Run: cmdutil.RunFunc(func(cmd *cobra.Command, args []string) error {
|
2017-10-31 02:28:51 +01:00
|
|
|
// Display the name of the current stack if a new one isn't specified.
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
if len(args) == 0 {
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
name, err := requireCurrentStack()
|
2017-10-03 01:37:12 +02:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
fmt.Printf("%v\n", name)
|
2017-10-31 01:47:12 +01:00
|
|
|
return nil
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
}
|
2017-08-23 01:23:50 +02:00
|
|
|
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// Ask all known backends about this stack.
|
2017-12-29 01:51:53 +01:00
|
|
|
var result error
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
bes, hasClouds := allBackends()
|
|
|
|
toSelect := tokens.QName(args[0])
|
|
|
|
for _, b := range bes {
|
|
|
|
stack, err := b.GetStack(toSelect)
|
|
|
|
if err != nil {
|
|
|
|
// If there is an error, file it away, but keep going in case it's a transient cloud error.
|
2017-12-29 01:51:53 +01:00
|
|
|
result = multierror.Append(result, errors.Wrapf(err,
|
|
|
|
"could not query '%s' backend for stack selection", b.Name()))
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
continue
|
|
|
|
} else if stack != nil {
|
|
|
|
return state.SetCurrentStack(toSelect)
|
2017-10-31 01:47:12 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
// If we fell through, the stack was not found. Issue an error. Also customize the error
|
|
|
|
// message if no clouds are logged into, since that is presumably a common mistake.
|
|
|
|
msg := fmt.Sprintf("no stack named '%s' found", toSelect)
|
|
|
|
if !hasClouds {
|
2017-12-29 01:51:53 +01:00
|
|
|
msg += "; you aren't logged into the Pulumi Cloud -- did you forget to 'pulumi login'?"
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
}
|
2017-12-29 01:51:53 +01:00
|
|
|
return multierror.Append(result, errors.New(msg))
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
}),
|
|
|
|
}
|
Improve the overall cloud CLI experience
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️
https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
2017-12-02 16:29:46 +01:00
|
|
|
cmd.PersistentFlags().StringVarP(
|
|
|
|
&cloud, "cloud", "c", "", "A URL for the Pulumi Cloud containing the stack to be selected")
|
|
|
|
return cmd
|
Make major commands more pleasant
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
2017-03-22 03:23:32 +01:00
|
|
|
}
|