* Error when loading a deployment that is not a version that the CLI understands
* Add a test for 'pulumi stack import' on a badly-versioned deployment
* Move current deployment version to 'apitype'
* Rebase against master
* CR: emit CLI-friendly error message at the two points outside of the engine calling 'DeserializeDeployment'
This change supports displaying manifest information for a stack and
changes the way we handle Snapshots in our backend.
Previously, every call to GetStack would synthesize a Snapshot by
taking the set of resources returned from the
`/api/stacks/<owner>/<name>` endpoint, combined with an empty
manfiest (since the service was not returning the manifest).
This wasn't great for two reasons:
1. We didn't have manifest information, so we couldn't display any of
its information (most important the last updated time).
2. This strategy required that the service return all the resources
for a stack anytime GetStack was called. While the CLI did not
often need this detailed information the fact that we forced the
Service to produce it (which in the case of stack managed PPC would
require the service to talk to yet another service) creates a bunch
of work that we end up ignoring.
I've refactored the code such that `backend.Stack`'s `Snapshot()` method
now lazily requests the information from the service such that we can
construct a `Snapshot()` on demand and only pay the cost when we
actually need it.
I think making more of this stuff lazy is the long term direction we
want to follow.
Unfortunately, right now, it means in cases where we do need this data
we end up fetching it twice. The service does it once when we call
GetStack and then we do it again when we actually need to get at the
Snapshot. However, once we land this change, we can update the
service to no longer return resources on the apistack.Stack type. The
CLI no longer needs this property. We'll likely want to continue in a
direction where `apistack.Stack` can be created quickly by the
service (without expensive database queries or fetching remote
resources) and just add additional endpoints that let us get at the
specific information we want in the specific cases when we want it
instead of forcing us to return a bunch of data that we often ignore.
Fixespulumi/pulumi-service#371
While we wait for upstream to fix the security issue, we'll just pass
`--no-audit` to `npm install` when creating a new project. Since the
warning is against an indirect dependency of @pulumi/pulumi, we can't
actually address the issue ourselves.
Mitigates #1350
In pulumi/pulumi#1356, we observed that we can fail during a destroy
because we attempt to load the language plugin, which now eagerly looks
for the @pulumi/pulumi package.
This is also blocking ingestion of the latest engine bits into the PPC.
It turns out that for destroy (and refresh), we have no need for the
language plugin. So, let's skip loading it when appropriate.
These changes add support for adding a tracing header to API requests
made to the Pulumi service. Setting the `PULUMI_TRACING_HEADER`
environment variable or enabling debug commands and passing the
`--tracing-header` will change the value sent in this header. Setting
this value to `1` will request that the service enable distributed
tracing for all requests made by a particular CLI invocation.
The newly added `pulumi config refresh` updates your local copy of the
Pulumi.<stack-name>.yaml file to have the same configuration as the
most recent deployment in the cloud.
This can be used in a varirty of ways. One place we plan to use it is
in automation to clean up "leaked" stacks we have in CI. With the
changes you'll now be able to do the following:
```
$ cd $(mktemp -d)
$ echo -e "name: who-cares\nruntime: nodejs" > Pulumi.yaml
$ pulumi stack select <leaked-stack-name>
$ pulumi config refresh -f
$ pulumi destroy --force
```
Having a simpler gesture for the above is something we'll want to do
long term (we should be able to support `pulumi destory <stack-name>`
from a completely empty folder, today you need a Pulumi.yaml file
present, even if the contents don't matter).
But this gets us a little closer to where we want to be and introduces
a helpful primitive in the system.
Contributes to #814
These changes add support for injecting client tracing spans into HTTP
requests to the Pulumi API. The server can then rematerialize these span
references and attach its own spans for distributed tracing.
This change moves Git failures from glog.Warnings, which we don't
really pay attention, to true CLI warnings.
This will ensure we at least get bug reports in the event that this
fails on some user machine out in the wild. They are still non-fatal,
of course, since such a failure needn't prevent an update from happening.
This change captures the Git committer and author's login and email
addresses, so that we can display them prominently in the service. At
the moment, we only attribute updates to the identity that performed the
update which, in CI scenarios, is often always the same person for an
organization. This makes Pulumi look like a needlessly lonely place.
These changes enable tracing of Pulumi API calls.
The span with which to associate an API call is passed via a
`context.Context` parameter. This required plumbing a
`context.Context` parameter through a rather large number of APIs,
especially in the backend.
In general, all API calls are associated with a new root span that
exists for essentially the entire lifetime of an invocation of the
Pulumi CLI. There were a few places where the plumbing got a bit hairier
than I was willing to address with these changes; I've used
`context.Background()` in these instances. API calls that receive this
context will create new root spans, but will still be traced.
* Initialize a new stack as part of `pulumi new`
* Prompt for values with defaults preselected
* Install dependencies
* Prompt for default config values
This changes the CLI interface in a few ways:
* `pulumi preview` is back! The alternative of saying
`pulumi update --preview` just felt awkward, and it's a common
operation to want to perform. Let's just make it work.
* There are two flags consistent across all update commands,
`update`, `refresh`, and `destroy`:
- `--skip-preview` will skip the preview step. Note that this
does *not* skip the prompt to confirm that you'd like to proceed.
Indeed, it will still prompt, with a little warning text about
the fact that the preview has been skipped.
* `--yes` will auto-approve the updates.
This lands us in a simpler and more intuitive spot for common scenarios.
I found the flag --force to be a strange name for skipping a preview,
since that name is usually reserved for operations that might be harmful
and yet you're coercing a tool to do it anyway, knowing there's a chance
you're going to shoot yourself in the foot.
I also found that what I almost always want in the situation where
--force was being used is to actually just run a preview and have the
confirmation auto-accepted. Going straight to --force isn't the right
thing in a CI scenario, where you actually want to run a preview first,
just to ensure there aren't any issues, before doing the update.
In a sense, there are four options here:
1. Run a preview, ask for confirmation, then do an update (the default).
2. Run a preview, auto-accept, and then do an update (the CI scenario).
3. Just run a preview with neither a confirmation nor an update (dry run).
4. Just do an update, without performing a preview beforehand (rare).
This change enables all four workflows in our CLI.
Rather than have an explosion of flags, we have a single flag,
--preview, which can specify the mode that we're operating in. The
following are the values which correlate to the above four modes:
1. "": default (no --preview specified)
2. "auto": auto-accept preview confirmation
3. "only": only run a preview, don't confirm or update
4. "skip": skip the preview altogether
As part of this change, I redid a bit of how the preview modes
were specified. Rather than booleans, which had some illegal
combinations, this change introduces a new enum type. Furthermore,
because the engine is wholly ignorant of these flags -- and only the
backend understands them -- it was confusing to me that
engine.UpdateOptions stored this flag, especially given that all
interesting engine options _also_ accepted a dryRun boolean. As of
this change, the backend.PreviewBehavior controls the preview options.
The `go-git` implementation of `git status` is outrageously expensive,
as it performs a hash-based comparision of the working tree against the
committed state with no caching. In some example runs, this takes
upwards of 15 seconds. Because this is on the startup path for updates,
this results in a rather poor user experience.
These changes replace the `go-git` implementation with a call to `git
status --porcelain -z`, which only writes data to stdout if the working
tree is dirty.
Note that these changes also make all git-related update metadata
best-effort.
These changes add a new flag to the CLI, `--profiling`, that enables
CPU and heap profiling as well as execution tracing of the CLI itself.
The argument to this flag serves as a prefix for the profile outputs;
the CPU and heap profiles and execution trace are written to
`[filename].[pid].{cpu,mem,trace}`, respectively.
These changes also fix an issue with `cmdutil.RunFunc` wherein any error
would prevent the command's post-run hooks from executing.
We already have a great history viewing experience on
Pulumi.com. `pulumi history` in the CLI today is basically unuseable,
and instead of working on trying to improve it, let's just remove it
for now.
Fixes#965
This change adds two new (hidden) CLI commands:
* `gen-bash-completion`: This command generates a bash completion
script for the CLI, storing it in the file specified by the 1st arg.
This fixespulumi/pulumi#1172.
* `gen-markdown`: This command generates a directory of Markdown files,
one per command, documenting the CLI commands and their usage.
I originally did these as separate scripts that we can use in our
build processes, but it was actually even easier to make `pulumi` able
to generate them for itself. The nice part about this is that we don't
even need to bundle additional assets in order to distribute e.g. the
bash completion scripts, we can simply tell people to run
$ pulumi gen-bash-completion /etc/bash_completion.d/pulumi
This can also be used in our upcoming Brew installer.
Pat ran into a weird error when trying to do some development agains
the testing cloud:
```
$ pulumi logout
$ pulumi login --cloud-url [test-cloud-url]
Logged into [test-cloud-url]
$ pulumi stack ls
Enter your Pulumi access token from https://pulumi.com/account:
```
In his case, we did not have `current` set in our credentials.json
file (likely due to him calling `pulumi logout` at some point) but we
did have stored credentials for that cloud. When he logged in the CLI
noticed we could reuse the stored credentials but did not update the
the current setting to set the current cloud.
While investigating, I also noticed that `logout` did not always do
the right thing when you were logged into a different backend than
pulumi.com
* Refactor the SnapshotManager interface
Lift snapshot management out of the engine by delegating it to the
SnapshotManager implementation in pkg/backend.
* Add a event interface for plugin loads and use that interface to record plugins in the snapshot
* Remove dead code
* Add comments to Events
* Add a number of tests for SnapshotManager
* CR feedback: use a successful bit on 'End' instead of having a separate 'Abort' API
* CR feedback
* CR feedback: register plugins one-at-a-time instead of the entire state at once
- Show Emojis on non-Windows platforms, instead of just macOS
- Change help text for `pulumi logs` to clarify the logs are specific
to a stack, not a project
- Display stack name when showing logs
- Have preamble text show to users for engine operations read a little
nicer
PPCs are no longer a central concept to our model, but instead a
feature that that pulumi.com provides to some organizations. Let's
remove most mentions of PPCs except for cases where we really need to
talk about them (e.g. when a stack is actually hosted in a PPC instead
of just via the normal pulumi.com service)
Also remove some "in the Pulumi Cloud" messages from the CLI, as using
the Pulumi Cloud is now the only real way to use pulumi.
Fixespulumi/pulumi-service#1117
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This command cancels a stack's currently running update, if any. It can
be used to recover from the scenario in which an update is aborted
without marking the running update as complete. Once an update has been
cancelled, it is likely that the affected stack will need to be repaired
via an pair of export/import commands before future updates can succeed.
This is part of #1077.