* Use Promise.resolve.
* Use `Inputs | Promise<Inputs> | Output<Inputs>` rather than
`Input<Inputs>`, which looks supremely bizarre.
* Update ComponentResource.registerOutputs also.
This change partly addresses pulumi/pulumi#1611, by permitting you
to export a promise at the top-level, and have it be recognized as
a stack output. In other words, you can now say things like
async function main() {
...
return {
a: "x",
...,
z: 42,
};
}
module.exports = main();
and your Pulumi program will record distinct outputs as you'd hope:
---outputs:---
a: "x"
...
z: 42
This is arguably just a bug in the way we implemented stack outputs.
The remainder of the requests in #1611 will remain open for future
design and discussion, as they have more subtle ramifications.
If a resource's options bag does not specify `protect` or `provider`,
pull a default value from the resource's parent.
In order to allow a parent resource to specify providers for multiple
resource types, component resources now accept an optional map from
package name to provider instance. When a custom resource needs a
default provider from its parent, it checks its parent provider bag for
an entry under its package. If a component resource does not have a
provider bag, its pulls a default from its parent.
These changes also add a `parent` field to `InvokeOptions` s.t. calls to
invoke can use the same behavior as resource creation w.r.t. providers.
Fixes#1735, #1736.
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
The pulumi runtime used to lazily load and parse both config and
settings data set by the language host. The initial reason for this
design was that we wanted the runtime to be usable in a normal node
environment, but we have moved away from supporting that.
In addition, while we claimed we loaded these value "lazily", we
actually forced their loading quite eagerly when we started
up. However, when capturing config (or settings, as we now do), we
would capture all the logic about loading these values from the
environment.
Even worse, in the case where you had two copies of @pulumi/pulumi
loaded, it would be possible to capture a config object which was not
initialized and then at runtime the initialization logic would try to
read PULUMI_CONFIG from the process environment and fail.
So we adopt a new model where configuration and settings are parsed as
we load their containing modules. In addition, to support SxS
scinerios, we continue to use `process.env` as a way to control both
configuration and settings. This means that `run.ts` must now ensure
that these values are present in the environment before either the
config or runtime modules have been loaded.
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
* Revert "Parallelize much more of resource creation in the JS language provider SDK (#1618)"
This reverts commit 4edd244a26.
* Revert "Process our async-work-queue in parallel. (#1619)"
This reverts commit b8c1cb9574.
Closure serialization now keeps track of the `require`d packages it sees in the function bodies that are serialized during a call to `serializeFunction`.
Also, replaces `serializeFunctionAsync` with `serializeFunction` which accepts richer parameters and return type, deprecating the former API (but leaving it available for now to avoid a breaking change).
Before the changes in #1414, all output properties were guaranteed to
have values after deserialization. After #1414, any properties with no
value were no longer resolved, which was treated as an error. These
changes resolve all missing proprties to `undefined`. If a property is
missing during an update, its `undefined` value is marked as known.
These changes add support for distinguishing an output property with
an unknown value from an output property with a known value that is
undefined.
In a broad sense, the Pulumi property type system is just JSON with the
addition of unknown values. Notably absent, however, are undefined
values. As it stands, our marshalers between JavaScript and Pulumi
property values treat all undefined JavaScript values as unknown Pulumi
values. Unfortunately, this conflates two very different concepts:
unknown Pulumi values are intended to represent values of output
properties that are unknown at time of preview, _not_ values that are
known but undefined. This results in difficulty reasoning about when
transforms are run on output properties as well as confusing output in
the `diff` view of Pulumi preview (user-specifed undefined values are
rendered as unknown values).
As it turns out, we already have a way to decide whether or not an
Output value is known or not: Output.performApply. These changes rename
this property to `isKnown`, clarify its meaning, and take advantage of
the result to decide whether or not an Output value should marshal as
an unknown Pulumi value.
This also allowed these changes to improve the serialization of
undefined object keys and array elements s.t. we better match JavaScript
to JSON serialization behavior (undefined object keys are omitted;
undefined array elements are marshaled as `null`).
Fixes https://github.com/pulumi/pulumi-cloud/issues/483.
* Fix a bug in promise leak detection that leaked promises when errors occur
* Add an opt-in to the super-verbose debug error message on promise leaks
* Fix a bad merge
* was/were grammar improvement in error message
* Fail the deployment if a debuggable promise leaks
* Graceful RPC shutdown: CLI side
* Handle unavailable resource monitor in language hosts
* Fix a comment
* Don't commit package-lock.json
* fix mangled pylint pragma
* Rebase against master and fix Gopkg.lock
* Code review feedback
* Fix a race between closing the callerEventsOpt channel and terminating a goroutine that writes to it
* glog -> logging
Rather than filtering out the `id` and `urn` properties when serializing
the inputs to an invoke, pass these properties along. This enables the
use of invoke endpoints that accepts these as inputs (e.g. the endpoint
that backs `aws.ec2.getSubnet`).
This change adopts `x is T` style of RTTI inquiry, which fits much
more nicely with TypeScript's typechecking flow.
Thanks to @lukehoban for teaching me a new trick today! :-)
This change moves us away from using JavaScript RTTI, by way of
`instanceof`, for built-in Pulumi types. If we use `instanceof`,
then the same logical type loaded from separate copies of the
SDK package -- as will happen in SxS scenarios -- are considered
different. This isn't actually what we want. The solution is
simple: implement our own quasi-RTTI solution, using __pulumi*
properties and manual as* and is* functions. Note that we could
have skipped the as* and is* functions, but I found that they led
to slightly easier to read code.
There is one strange thing in here, which I spoke to
@CyrusNajmabadi about: SerializedOutput<T>, because it implements
Output<T> as an _interface_, did not previously masquerade as an
actual Output<T>. In other words, `instanceof` would have returned
false, and indeed a few important properties (like promise) are
missing. This change preserves that behavior, although I'll admit
that this is slightly odd. I suspect we'll want to revisit this as
part of https://github.com/pulumi/pulumi/issues/1074.
Fixes https://github.com/pulumi/pulumi/issues/1203.
* Introduce a simple repetition operator to match expected error messages against actual ones
* Convert required and optional objects to use a Map (node v9 compat), improve the error formatting for failed tests
* Test node v6, v8, and v9 in CI
* Get rid of PULUMI_API env in .travis.yml, it's set from the Travis console now
* Implement closure scope chain analysis in pure TypeScript
This change makes use of four V8 intrinsics to avoid having to use a
native module to inspect the scope chains of live Function objects. This
unfortunately leads to the limitation of not allowing captures of 'this'
in arrow functions, but that is something we are willing to live with
for now.
* Remove native module build and restore from the Makefile
* CR feedback: Be a little more efficient when scanning the scope chain
* Nuke everything related to custom Node versions and the native Node module
* CR feedback: rename native.ts -> v8.ts, document some interfaces in v8.ts
