This change just flows the project's "main" directory all the way
through to the plugins, fixing #667. In that work item, we discussed
alternative approaches, such as rewriting the asset paths, but this
is tricky because it's very tough to do without those absolute paths
somehow ending up in the checkpoint files. Just launching the
processes with the right pwd is far easier and safer, and it turns
out that, conveniently, we set up the plugin context in exactly the
same place that we read the project information.
The two-phase output properties change broke the ability to recover
from a failed replacement that yields pending deletes in the checkpoint.
The issue here is simply that we should remember pending registrations
only for logical operations that *also* have a "new" state (create or
update). This commit fixes this, and also adds a new step test with
fault injection to probe many interesting combinations of steps.
Every single resource has a type prefix of
pulumi:pulumi:Stack$
which makes URNs quite lengthy without adding any value. Since
they all have this prefix, adding it doesn't help to disambiguate.
This change skips adding the parent URN part when it is the built-in
automatic stack type name.
At some point, we fixed a bug in the way state is managed for "same"
steps, which meant that we wouldn't see newly added output properties.
This had the effect that, if you had a stack already stood up, and
updated it to have output properties, we would miss them. (Stacks
stood up from scratch would still have them.) This fixes that problem,
in addition to two other things: 1) we need to sort output property
names to ensure a deterministic ordering, and 2) we need to also
unconditionally apply the outputs RPC coming in, to ensure that the
resulting resource always has the correct outputs (so that for example
deleting prior output properties actually deletes them).
Also add some testing for this area to make sure we don't break again.
Fixespulumi/pulumi#631.
These changes push the `config.{Map,Value}` interfaces further down into
the deployment engine so that configuration can be decrypted nearer to
its use.
This is the first part of the fix for pulumi/pulumi-ppc#112.
As documented in issue #616, the inputs/defaults/outputs model we have
today has fundamental problems. The crux of the issue is that our
current design requires that defaults present in the old state of a
resource are applied to the new inputs for that resource.
Unfortunately, it is not possible for the engine to decide which
defaults remain applicable and which do not; only the provider has that
knowledge.
These changes take a more tactical approach to resolving this issue than
that originally proposed in #616 that avoids breaking compatibility with
existing checkpoints. Rather than treating the Pulumi inputs as the
provider input properties for a resource, these inputs are first
translated by `Check`. In order to accommodate provider defaults that
were chosen for the old resource but should not change for the new,
`Check` now takes the old provider inputs as well as the new Pulumi
inputs. Rather than the Pulumi inputs and provider defaults, the
provider inputs returned by `Check` are recorded in the checkpoint file.
Put simply, these changes remove defaults as a first-class concept
(except inasmuch as is required to retain the ability to read old
checkpoint files) and move the responsibilty for manging and
merging defaults into the provider that supplies them.
Fixes#616.
This change adds a new manifest section to the checkpoint files.
The existing time moves into it, and we add to it the version of
the Pulumi CLI that created it, along with the names, types, and
versions of all plugins used to generate the file. There is a
magic cookie that we also use during verification.
This is to help keep us sane when debugging problems "in the wild,"
and I'm sure we will add more to it over time (checksum, etc).
For example, after an up, you can now see this in `pulumi stack`:
```
Current stack is demo:
Last updated at 2017-12-01 13:48:49.815740523 -0800 PST
Pulumi version v0.8.3-79-g1ab99ad
Plugin pulumi-provider-aws [resource] version v0.8.3-22-g4363e77
Plugin pulumi-langhost-nodejs [language] version v0.8.3-79-g77bb6b6
Checkpoint file is /Users/joeduffy/dev/code/src/github.com/pulumi/pulumi-aws/.pulumi/stacks/webserver/demo.json
```
This addresses pulumi/pulumi#628.
This change introduces automatic integrity checking for snapshots.
Hopefully this will help us track down what's going on in
pulumi/pulumi#613. Eventually we probably want to make this opt-in,
or disable it entirely other than for internal Pulumi debugging, but
until we add more complete DAG verification, it's relatively cheap
and is worthwhile to leave on for now.
The prior change was incorrectly handling snapshotting of replacement
operations. Further, in hindsight, the older model of having steps
manage their interaction with the snapshot marking was clearer, so
I've essentially brought that back, merging it with the other changes.
This change simplifies the necessary RPC changes for components.
Instead of a Begin/End pair, which complicates the whole system
because now we have the opportunity of a missing End call, we will
simply let RPCs come in that append outputs to existing states.
We need to invoke the post-step event hook *after* updating the
state snapshots, so that it will write out the updated state.
We also need to re-serialize the snapshot again after we receive
updated output properties, otherwise they could be missing if this
happens to be the last resource (e.g., as in Stacks).
This change brings back component outputs to the overall system again.
In doing so, it generally overhauls the way we do resource RPCs a bit:
* Instead of RegisterResource and CompleteResource, we call these
BeginRegisterResource and EndRegisterResource, which begins to model
these as effectively "asynchronous" resource requests. This should also
help with parallelism (https://github.com/pulumi/pulumi/issues/106).
* Flip the CLI/engine a little on its head. Rather than it driving the
planning and deployment process, we move more to a model where it
simply observes it. This is done by implementing an event handler
interface with three events: OnResourceStepPre, OnResourceStepPost,
and OnResourceComplete. The first two are invoked immediately before
and after any step operation, and the latter is invoked whenever a
EndRegisterResource comes in. The reason for the asymmetry here is
that the checkpointing logic in the deployment engine is largely
untouched (intentionally, as this is a sensitive part of the system),
and so the "begin"/"end" nature doesn't flow through faithfully.
* Also make the engine more event-oriented in its terminology and the
way it handles the incoming BeginRegisterResource and
EndRegisterResource events from the language host. This is the first
step down a long road of incrementally refactoring the engine to work
this way, a necessary prerequisite for parallelism.
* Don't show +s, -s, and ~s deeply. The intended format here looks
more like
+ aws:iam/instanceProfile:InstanceProfile (create)
[urn=urn:pulumi:test::aws/minimal::aws/iam/instanceProfile:InstanceProfile::ip2]
name: "ip2-079a29f428dc9987"
path: "/"
role: "ir-d0a632e3084a0252"
versus
+ aws:iam/instanceProfile:InstanceProfile (create)
+ [urn=urn:pulumi:test::aws/minimal::aws/iam/instanceProfile:InstanceProfile::ip2]
+ name: "ip2-079a29f428dc9987"
+ path: "/"
+ role: "ir-d0a632e3084a0252"
This makes it easier to see the resources modified in the output.
* Print adds/deletes during updates as
- property: "x"
+ property: "y"
rather than
~ property: "x"
~ property: "y"
the latter of which doesn't really tell you what's new/old.
* Show parent indentation on output properties, so they line up correctly.
* Only print stack outputs if not undefined.
This change switches from child lists to parent pointers, in the
way resource ancestries are represented. This cleans up a fair bit
of the old parenting logic, including all notion of ambient parent
scopes (and will notably address pulumi/pulumi#435).
This lets us show a more parent/child display in the output when
doing planning and updating. For instance, here is an update of
a lambda's text, which is logically part of a cloud timer:
* cloud:timer:Timer: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️timer:Timer::lm-cts-malta-job-CleanSnapshots]
* cloud:function:Function: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️function:Function::lm-cts-malta-job-CleanSnapshots]
* aws:serverless:Function: (same)
[urn=urn:pulumi:malta::lm-cloud::aws:serverless:Function::lm-cts-malta-job-CleanSnapshots]
~ aws:lambda/function:Function: (modify)
[id=lm-cts-malta-job-CleanSnapshots-fee4f3bf41280741]
[urn=urn:pulumi:malta::lm-cloud::aws:lambda/function:Function::lm-cts-malta-job-CleanSnapshots]
- code : archive(assets:2092f44) {
// etc etc etc
Note that we still get walls of text, but this will be actually
quite nice when combined with pulumi/pulumi#454.
I've also suppressed printing properties that didn't change during
updates when --detailed was not passed, and also suppressed empty
strings and zero-length arrays (since TF uses these as defaults in
many places and it just makes creation and deletion quite verbose).
Note that this is a far cry from everything we can possibly do
here as part of pulumi/pulumi#340 (and even pulumi/pulumi#417).
But it's a good start towards taming some of our output spew.
This change adds back component output properties. Doing so
requires splitting the RPC interface for creating resources in
half, with an initial RegisterResource which contains all of the
input properties, and a final CompleteResource which optionally
contains any output properties synthesized by the component.
This change switches from child lists to parent pointers, in the
way resource ancestries are represented. This cleans up a fair bit
of the old parenting logic, including all notion of ambient parent
scopes (and will notably address pulumi/pulumi#435).
This lets us show a more parent/child display in the output when
doing planning and updating. For instance, here is an update of
a lambda's text, which is logically part of a cloud timer:
* cloud:timer:Timer: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️timer:Timer::lm-cts-malta-job-CleanSnapshots]
* cloud:function:Function: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️function:Function::lm-cts-malta-job-CleanSnapshots]
* aws:serverless:Function: (same)
[urn=urn:pulumi:malta::lm-cloud::aws:serverless:Function::lm-cts-malta-job-CleanSnapshots]
~ aws:lambda/function:Function: (modify)
[id=lm-cts-malta-job-CleanSnapshots-fee4f3bf41280741]
[urn=urn:pulumi:malta::lm-cloud::aws:lambda/function:Function::lm-cts-malta-job-CleanSnapshots]
- code : archive(assets:2092f44) {
// etc etc etc
Note that we still get walls of text, but this will be actually
quite nice when combined with pulumi/pulumi#454.
I've also suppressed printing properties that didn't change during
updates when --detailed was not passed, and also suppressed empty
strings and zero-length arrays (since TF uses these as defaults in
many places and it just makes creation and deletion quite verbose).
Note that this is a far cry from everything we can possibly do
here as part of pulumi/pulumi#340 (and even pulumi/pulumi#417).
But it's a good start towards taming some of our output spew.
This change fixes getProject to return the project name, as
originally intended. (One line was missing.)
It also adds an integration test for this.
Fixespulumi/pulumi#580.
When producing a snapshot for a plan, we have two resource DAGs. One of
these is the base DAG for the plan; the other is the current DAG for the
plan. Any resource r may be present in both DAGs. In order to produce a
snapshot, we need to merge these DAGs such that all resource
dependencies are correctly preserved. Conceptually, the merge proceeds
as follows:
- Begin with an empty merged DAG.
- For each resource r in the current DAG, insert r and its outgoing
edges into the merged DAG.
- For each resource r in the base DAG:
- If r is in the merged DAG, we are done: if the resource is in the
merged DAG, it must have been in the current DAG, which accurately
captures its current dependencies.
- If r is not in the merged DAG, insert it and its outgoing edges
into the merged DAG.
Physically, however, each DAG is represented as list of resources
without explicit dependency edges. In place of edges, it is assumed that
the list represents a valid topological sort of its source DAG. Thus,
any resource r at index i in a list L must be assumed to be dependent on
all resources in L with index j s.t. j < i. Due to this representation,
we implement the algorithm above as follows to produce a merged list
that represents a valid topological sort of the merged DAG:
- Begin with an empty merged list.
- For each resource r in the current list, append r to the merged list.
r must be in a correct location in the merged list, as its position
relative to its assumed dependencies has not changed.
- For each resource r in the base list:
- If r is in the merged list, we are done by the logic given in the
original algorithm.
- If r is not in the merged list, append r to the merged list. r
must be in a correct location in the merged list:
- If any of r's dependencies were in the current list, they must
already be in the merged list and their relative order w.r.t.
r has not changed.
- If any of r's dependencies were not in the current list, they
must already be in the merged list, as they would have been
appended to the list before r.
Prior to these changes, we had been performing these operations in
reverse order: we would start by appending any resources in the old list
that were not in the new list, then append the whole of the new list.
This caused out-of-order resources when a program that produced pending
deletions failed to run to completion.
Fixes#572.
These changes introduce a new field, `Raw`, to `diag.Message`. This
field indicates that the contents of the message are not a format string
and should not be rendered via `Sprintf` during stringification.
The plugin std{out,err} readers have been updated to use raw messages,
and the event reader in `pulumi` has been fixed s.t. it does not format
event payloads before display.
Fixes#551.
Adds OpenTracing in the Pulumi engine and plugin + langhost subprocesses.
We currently create a single root span for any `Enging.plan` operation - which is a single `preview`, `update`, `destroy`, etc.
The only sub-spans we currently create are at gRPC boundaries, both on the client and server sides and on both the langhost and provider plugin interfaces.
We could extend this to include spans for any other semantically meaningful sections of compute inside the engine, though initial examples show we get pretty good granularity of coverage by focusing on the gRPC boundaries.
In the future, this should be easily extensible to HTTP boundaries and to track other bulky I/O like datastore read/writes once we hook up to the PPC and Pulumi Cloud.
We expose a `--trace <endpoint>` option to enable tracing on the CLI, which we will aim to thread through to subprocesses.
We currently support sending tracing data to a Zipkin-compatible endpoint. This has been validated with both Zipkin and Jaeger UIs.
We do not yet have any tracing inside the TypeScript side of the JS langhost RPC interface. There is not yet automatic gRPC OpenTracing instrumentation (though it looks like it's in progress now) - so we would need to manually create meaningful spans on that side of the interface.
In our existing code, we only use the input state for old and new
properties. This is incorrect and I'm astonished we've been flying
blind for so long here. Some resources require the output properties
from the prior operation in order to perform updates. Interestingly,
we did correclty use the full synthesized state during deletes.
I ran into this with the AWS Cloudfront Distribution resource,
which requires the etag from the prior operation in order to
successfully apply any subsequent operations.
We were previously calling configure on each package once per time it was mentioned in the config. We only need to call it once ever as we pass the full bag of relevent config through on that one call.
It's legal and possible for undefined properties to show up in
objects, since that's an idiomatic JavaScript way of initializing
missing properties. Instead of failing for these during deployment,
we should simply skip marshaling them to Terraform and let it do
its thing as usual. This came up during our customer workload.
We now encrypt secrets at rest based on a key derived from a user
suplied passphrase.
The system is designed in a way such that we should be able to have a
different decrypter (either using a local key or some remote service
in the Pulumi.com case in the future).
Care is taken to ensure that we do not leak decrypted secrets into the
"info" section of the checkpoint file (since we currently store the
config there).
In addtion, secrets are "pay for play", a passphrase is only needed
when dealing with a value that's encrypted. If secure config values
are not used, `pulumi` will never prompt you for a
passphrase. Otherwise, we only prompt if we know we are going to need
to decrypt the value. For example, `pulumi config <key>` only prompts
if `<key>` is encrypted and `pulumi deploy` and friends only prompt if
you are targeting a stack that has secure configuration assoicated
with it.
Secure values show up as unecrypted config values inside the language
hosts and providers.
This improves a few things about assets:
* Compute and store hashes as input properties, so that changes on
disk are recognized and trigger updates (pulumi/pulumi#153).
* Issue explicit and prompt diagnostics when an asset is missing or
of an unexpected kind, rather than failing late (pulumi/pulumi#156).
* Permit raw directories to be passed as archives, in addition to
archive formats like tar, zip, etc. (pulumi/pulumi#240).
* Permit not only assets as elements of an archive's member list, but
also other archives themselves (pulumi/pulumi#280).
Instead of doing the logic to see if a type has YAML tags and then
dispatching based on that to use either the direct go-yaml marshaller
or the one that works in terms of JSON tags, let's just say that we
always add YAML tags as well, and use go-yaml directly.
This change adds functions, `pulumi.getProject()` and `pulumi.getStack()`,
to fetch the names of the project and stack, respectively. These can be
handy in generating names, specializing areas of the code, etc.
This fixespulumi/pulumi#429.
During the course of a `pulumi update`, it is possible for a resource to
become slated for deletion. In the case that this deletion is part of a
replacement, another resource with the same URN as the to-be-deleted
resource will have been created earlier. If the `update` fails after the
replacement resource is created but before the original resource has been
deleted, the snapshot must capture that the original resource still exists
and should be deleted in a future update without losing track of the order
in which the deletion must occur relative to other deletes. Currently, we
are unable to track this information because the our checkpoints require
that no two resources have the same URN.
To fix this, these changes introduce to the update engine the notion of a
resource that is pending deletion and change checkpoint serialization to
use an array of resources rather than a map. The meaning of the former is
straightforward: a resource that is pending deletion should be deleted
during the next update.
This is a fairly major breaking change to our checkpoint files, as the
map of resources is no more. Happily, though, it makes our checkpoint
files a bit more "obvious" to any tooling that might want to grovel
or rewrite them.
Fixes#432, #387.
A dynamic resource is a resource whose provider is implemented alongside
the resource itself. This provider may close over and use orther
resources in the implementation of its CRUD operations. The provider
itself must be stateless, as each CRUD operation for a particular
dynamic resource type may use an independent instance of the provider.
Changes to the definition of a resource's provider result in replacement
of the resource itself (rather than a simple update), as this allows the
old provider definition to delete the old resource and the new provider
definition to create an appropriate replacement.
Previously we used the word "Environment" as the term for a deployment
target, but since then we've started to use the term Stack. Adopt this
across the CLI.
From a user's point of view, there are a few changes:
1. The `env` verb has been renamed to `stack`
2. The `-e` and `--env` options to commands which operate on an
environment now take `-s` or `--stack` instead.
3. Becase of (2), the commands that used `-s` to display a summary now
only support passing the full option name (`--summary`).
On the local file system, we still store checkpoint data in the `env`
sub-folder under `.pulumi` (so we can reuse existing checkpoint files
that were written to the old folder)
This changes a few things about "components":
* Rename what was previously ExternalResource to CustomResource,
and all of the related fields and parameters that this implies.
This just seems like a much nicer and expected name for what
these represent. I realize I am stealing a name we had thought
about using elsewhere, but this seems like an appropriate use.
* Introduce ComponentResource, to make initializing resources
that merely aggregate other resources easier to do correctly.
* Add a withParent and parentScope concept to Resource, to make
allocating children less error-prone. Now there's no need to
explicitly adopt children as they are allocated; instead, any
children allocated as part of the withParent callback will
auto-parent to the resource provided. This is used by
ComponentResource's initialization function to make initialization
easier, including the distinction between inputs and outputs.
This change implements core support for "components" in the Pulumi
Fabric. This work is described further in pulumi/pulumi#340, where
we are still discussing some of the finer points.
In a nutshell, resources no longer imply external providers. It's
entirely possible to have a resource that logically represents
something but without having a physical manifestation that needs to
be tracked and managed by our typical CRUD operations.
For example, the aws/serverless/Function helper is one such type.
It aggregates Lambda-related resources and exposes a nice interface.
All of the Pulumi Cloud Framework resources are also examples.
To indicate that a resource does participate in the usual CRUD resource
provider, it simply derives from ExternalResource instead of Resource.
All resources now have the ability to adopt children. This is purely
a metadata/tagging thing, and will help us roll up displays, provide
attribution to the developer, and even hide aspects of the resource
graph as appropriate (e.g., when they are implementation details).
Our use of this capability is ultra limited right now; in fact, the
only place we display children is in the CLI output. For instance:
+ aws:serverless:Function: (create)
[urn=urn:pulumi:demo::serverless::aws:serverless:Function::mylambda]
=> urn:pulumi:demo::serverless::aws:iam/role:Role::mylambda-iamrole
=> urn:pulumi:demo::serverless::aws:iam/rolePolicyAttachment:RolePolicyAttachment::mylambda-iampolicy-0
=> urn:pulumi:demo::serverless::aws:lambda/function:Function::mylambda
The bit indicating whether a resource is external or not is tracked
in the resulting checkpoint file, along with any of its children.
The checkpoint is an implementation detail of the storage of an
environment. Instead of interacting with it, make sure that all the
data we need from it either hangs off the Snapshot or Target
objects (which you can get from a Checkpoint) and then start consuming
that data.
This change adds the capability for a resource provider to indicate
that, where an action carried out in response to a diff, a certain set
of properties would be "stable"; that is to say, they are guaranteed
not to change. As a result, properties may be resolved to their final
values during previewing, avoiding erroneous cascading impacts.
This avoids the ever-annoying situation I keep running into when demoing:
when adding or removing an ingress rule to a security group, we ripple
the impact through the instance, and claim it must be replaced, because
that instance depends on the security group via its name. Well, the name
is a great example of a stable property, in that it will never change, and
so this is truly unfortunate and always adds uncertainty into the demos.
Particularly since the actual update doesn't need to perform replacements.
This resolvespulumi/pulumi#330.
`deploy.Plan.Apply` was only consumed by the engine, and seemed to be in
the wrong place given the API exported by the rest of `Plan` (i.e.
`Plan.Start` + `PlanIterator`). Furthermore, we were missing a reasonable
opportunity to share code between `update` and `preview`, both of which
need to walk the plan. These changes move the plan walk into `package engine`
as `planResult.Walk` and replace the `Progress` interface with a new interface,
`StepActions`, which subsumes the functionality of the former and adds support
for implementation-specific step execution. `planResult.Walk` is then
consumed by both `Engine.Deploy` and `Engine.PrintPlan`.
This change enables us to make progress on exposing data sources
(see pulumi/pulumi-terraform#29). The idea is to have an Invoke
function that simply takes a function token and arguments, performs
the function lookup and invocation, and then returns a return value.
Print "modified" rather than "modifyd". This introduces a new method,
`resource.StepOp.PastTense()`, which returns the past tense description
of the operation.
This includes a few changes:
* The repo name -- and hence the Go modules -- changes from pulumi-fabric to pulumi.
* The Node.js SDK package changes from @pulumi/pulumi-fabric to just pulumi.
* The CLI is renamed from lumi to pulumi.
Instead of binding on 0.0.0.0 (which will listen on every interface)
let's only listen on localhost. On windows, this both makes the
connection Just Work and also prevents the Windows Firewall from
blocking the listen (and displaying UI saying it has blocked an
application and asking if the user should allow it)
This change flips the polarity on parallelism: rather than having a
--serialize flag, we will have a --parallel=P flag, and by default
we will shut off parallelism. We aren't benefiting from it at the
moment (until we implement pulumi/pulumi-fabric#106), and there are
more hidden dependencies in places like AWS Lambdas and Permissions
than I had realized. We may revisit the default, but this allows
us to bite off the messiness of dependsOn only when we benefit from
it. And in any case, the --parallel=P capability will be useful.
This change adds an optiona dependsOn parameter to Resource constructors,
to "force" a fake dependency between resources. We have an extremely strong
desire to resort to using this only in unusual cases -- and instead rely
on the natural dependency DAG based on properties -- but experience in other
resource provisioning frameworks tells us that we're likely to need this in
the general case. Indeed, we've already encountered the need in AWS's
API Gateway resources... and I suspect we'll run into more especially as we
tackle non-serverless resources like EC2 Instances, where "ambient"
dependencies are far more commonplace.
This also makes parallelism the default mode of operation, and we have a
new --serialize flag that can be used to suppress this default behavior.
Full disclosure: I expect this to become more Make-like, i.e. -j 8, where
you can specify the precise width of parallelism, when we tackle
pulumi/pulumi-fabric#106. I also think there's a good chance we will flip
the default, so that serial execution is the default, so that developers
who don't benefit from the parallelism don't need to worry about dependsOn
in awkward ways. This tends to be the way most tools (like Make) operate.
This fixespulumi/pulumi-fabric#335.
This change finishes the conversion of LUMIDL over to the new
runtime model, with the appropriate code generation changes.
It turns out the old model actually had a flaw in it anyway that we
simply didn't hit because we hadn't been stressing output properties
nearly as much as the new model does. This resulted in needing to
plumb the rejection (or allowance) of computed properties more
deeply into the resource property marshaling/unmarshaling logic.
As of these changes, I can run the GitHub provider again locally.
This change fixespulumi/pulumi-fabric#332.
This change upgrades gRPC to 1.6.0 to pick up a few bug fixes.
We also use the full address for gRPC endpoints, including the
interface name, as otherwise we pick the wrong interface on Linux.
There's a fair bit of clean up in here, but the meat is:
* Allocate the language runtime gRPC client connection on the
goroutine that will use it; this eliminates race conditions.
* The biggie: there *appears* to be a bug in gRPC's implementation
on Linux, where it doesn't implement WaitForReady properly. The
behavior I'm observing is that RPC calls will not retry as they
are supposed to, but will instead spuriously fail during the RPC
startup. To work around this, I've added manual retry logic in
the shared plugin creation function so that we won't even try
to use the client connection until it is in a well-known state.
pulumi/pulumi-fabric#337 tracks getting to the bottom of this and,
ideally, removing the work around.
The other minor things are:
* Separate run.js into its own module, so it doesn't include
index.js and do a bunch of random stuff it shouldn't be doing.
* Allow run.js to be invoked without a --monitor. This makes
testing just the run part of invocation easier (including
config, which turned out to be super useful as I was debugging).
* Tidy up some messages.
If a resource's planning operation is to do nothing, we can safely
assume that all of its properties are stable. This can be used during
planning to avoid cascading updates that we know will never happen.
As explained in pulumi/pulumi-fabric#293, we were a little ad-hoc in
how configuration was "applied" to resource providers.
In fact, config wasn't ever communicated directly to providers; instead,
the resource providers would simply ask the engine to read random heap
locations (via tokens). Now that we're on a plan where configuration gets
handed to the program at startup, and that's that, and where generally
speaking resource providers never communicate directly with the language
runtime, we need to take a different approach.
As such, the resource provider interface now offers a Configure RPC
method that the resource planning engine will invoke at the right
times with the right subset of configuration variables filtered to
just that provider's package. This fixespulumi/pulumi#293.
This change simplifies the provider RPC interface slightly:
1) Eliminate Get. We really don't need it anymore. There are
several possibly-interesting scenarios down the road that may
demand it, but when we get there, we can consider how best to
bring this back. Furthermore, the old-style Get remains mostly
incompatible with Terraform anyway.
2) Pass URNs, not type tokens, across the RPC boundary. This gives
the provider access to more interesting information: the type,
still, but also the name (which is no longer an object property).
This changes a few things in the CLI, mostly just prettying it up:
* Label all steps more clearly with the kind of step. Also
unify the way we present this during planning and deployment.
* Summarize the changes that *did not* get made just as clearly
as those that did. In other words, stuff like this:
info: 2 resources changed:
+1 resource created
-1 resource deleted
5 resources unchanged
and
info: no resources required
5 resources unchanged
* Always print output properties when they are pertinent.
This includes creates, replacements, and updates.
* Show replacement creates and deletes very distinctly. The
create parts show up minty green and the delete parts show up
rosey red. These are the "physical" steps, compared to the
"logical" step of replacement (which remains marigold).
I still don't love where we are here. The asymmetry between
planning and deployment bugs me, and could be surprising.
("Hey, my deploy doesn't look like my plan!") I don't know
what developers will want to see here and I feel like in
general we are spewing far too much into the CLI to make it
even useful for anything but diagnosing failures afterwards.
I propose that we should do a deep dive on this during the
CLI epic, pulumi/pulumi-service#2.
This resolvespulumi/pulumi-fabric#305.
We are renaming Lumi to Pulumi Fabric. This change simply renames the
pulumi/lumi repo to pulumi/pulumi-fabric, without the CLI tools and other
changes that will follow soon afterwards.
This changes the RPC interfaces between Lumi and provider ever so
slightly, so that we can track default properties explicitly. This
is required to perform accurate diffing between inputs provided by
the developer, inputs provided by the system, and outputs. This is
particularly important for default values that may be indeterminite,
such as those we use in the bridge to auto-generate unique IDs.
Otherwise, we fail to reapply defaults correctly, and trick the
provider into thinking that properties changed when they did not.
This is a small step towards pulumi/lumi#306, in which we will defer
even more responsibility for diffing semantics to the providers.
For Update and Delete operations, we provided just the input state
for a resource. This is insufficient, because the provider may need
to depend on output state from the Create or prior Update operations.
This change merges the output atop the input during the step application.
As part of the bridge bringup, I've discoverd that the property state
returned from Creates does *not* always equal the state that is then
read from calls to Get. (I suspect this is a bug and that they should
be equivalent, but I doubt it's fruitfal to try and track down all
occurrences of this; I bet it's widespread). To cope with this, we will
return state from Create and Update, instead of issuing a call to Get.
This was a design we considered to start with and frankly didn't have
a super strong reason to do it the current way, other than that it seemed
elegant to place all of the Get logic in one place.
Note that providers may choose to return nil, in which case we will read
state from the provider in the usual Get style.
This change recognizes assets and archives as 1st class resource
property values. This is necessary to support them in the new bridge
work, and lays the foundation for fixing pulumi/lumi#153.
I also took the opportunity to clean up some old cruft in the
resource properties area.
This adds a ReadLocations RPC function to the engine interface, alongside
the singular ReadLocation. The plural function takes a single token that
represents a module or class and we will then return all of the module
or class (static) properties that are currently known.
We fail very late in the process of plan application, should a duplicate
URN arise. This change fails as early in the process as possible and
ensures that it does so with good line number information.
This properly unwinds the interpreter should something happen that
results in cancellation. This occurs, for example, when the planning
engine encounters an error and decides that it doesn't need to proceed
further with evaluation before it simply goes ahead and exits.
This change fixes a few things:
* Most importantly, we need to place a leading "." in the paths
to Gometalinter, otherwise some sub-linters just silently skip
the directory altogether. errcheck is one such linter, which
is a very important one!
* Use an explicit Gometalinter.json file to configure the various
settings. This flips on a few additional linters that aren't
on by default (line line length checking). Sadly, a few that
I'd like to enable take waaaay too much time, so in the future
we may consider a nightly job (this includes code similarity,
unused parameters, unused functions, and others that generally
require global analysis).
* Now that we're running more, however, linting takes a while!
The core Lumi project now takes 26 seconds to lint on my laptop.
That's not terrible, but it's long enough that we don't want to
do the silly "run them twice" thing our Makefiles were previously
doing. Instead, we shall deploy some $$($${PIPESTATUS[1]}-1))-fu
to rely on the fact that grep returns 1 on "zero lines".
* Finally, fix the many issues that this turned up.
I think(?) we are done, except, of course, for needing to drive
down some of the cyclomatic complexity issues (which I'm possibly
going to punt on; see pulumi/lumi#259 for more details).
We were not propagating the error from `deployLatest` through
to the CLI error result. Despite out recent efforts to integrate
gometalinter, there were also several additional similar cases of
ignored error results reported by `errcheck`. Not yet clear why
these are not being reported via gometalinter.
Fixes#262.
After 233c5a8 landed, I noticed there are a few things to be fixed up:
* Run gometalinter in all the right places. We need to run both in
lint and lint_quiet targets. I've also cleaned up some of the logic
around what to suppress so there's less repetition.
* We currently @ meaningful commands, which is unfortunate, since it
makes debugging Makefiles tough (especially when looking at CI build
logs). Going forward, we should only use @ for meaningless commands,
like @echo.
* The AWS project wasn't actually running tslint, because it needs to
say `tslint './pack/**/*.ts' --exclude='./pack/node_modules/**'`.
The current script of `tslint lib/aws/pack/...` wasn't actually
running lint, hence we missed a lot of AWS lint issues.
* Fix up the issues that these fixes uncovered. Mostly err shadowing.
This continues the previous commit and establishes the interpreter
context so that we can use the new host interface. In summary:
* Instead of using the NullSource for destructions -- which
doesn't hook up an interpreter and so any reads of configuration
variables will fail -- we will enlighten the EvalSource to know
how to orchestrate destruction interpretation. The primary
difference is that we don't actually run the code, but *we do*
perform all of the necessary configuration and variable init.
* Associate the active interpreter with the plugin context as
we are executing, so that the host object can actually read the
state from the heap as requested to do so by attached plugins.
* Rename anything "engine" related to use the term "host"; this
avoids introducing unnecesarily new terminology.
* Add a new pkg/resource/provider/ package where we can begin
consolidating helper functionality for resource providers.
Right now, this includes a wrapper interface atop the gRPC
machinery necessary to contact the host, in addition to a
Main function that hides some boilerplate entrypoint code.
* Add a rpcutil.IsBenignCloseErr routine to let us ignore
"benign" gRPC errors that are knowingly returned at shutdown.
This commit completes pulumi/lumi#117.
This change adds an engine gRPC interface, and associated implementation,
so that plugins may do interesting things that require "phoning home".
Previously, the engine would fire up plugins and talk to them directly,
but there was no way for a plugin to ask the engine to do anything.
The motivation here is so that plugins can read evaluator state, such
as config information, but this change also allows richer logging
functionality than previously possible. We will still auto-log any
stdout/stderr writes; however, explicit errors, warnings, informational,
and even debug messages may be written over the Log API.
This change implements the `get` function for resources. Per pulumi/lumi#83,
this allows Lumi scripts to actually read from the target environment.
For example, we can now look up a SecurityGroup from its ARN:
let group = aws.ec2.SecurityGroup.get(
"arn:aws:ec2:us-west-2:153052954103:security-group:sg-02150d79");
The returned object is a fully functional resource object. So, we can then
link it up with an EC2 instance, for example, in the usual ways:
let instance = new aws.ec2.Instance(..., {
securityGroups: [ group ],
});
This didn't require any changes to the RPC or provider model, since we
already implement the Get function.
There are a few loose ends; two are short term:
1) URNs are not rehydrated.
2) Query is not yet implemented.
One is mid-term:
3) We probably want a URN-based lookup function. But we will likely
wait until we tackle pulumi/lumi#109 before adding this.
And one is long term (and subtle):
4) These amount to I/O and are not repeatable! A change in the target
environment may cause a script to generate a different plan
intermittently. Most likely we want to apply a different kind of
deployment "policy" for such scripts. These are inching towards the
scripting model of pulumi/lumi#121, which is an entirely different
beast than the repeatable immutable infrastructure deployments.
Finally, it is worth noting that with this, we have some of the fundamental
underpinnings required to finally tackle "inference" (pulumi/lumi#142).
This change simplifies the generated Check interface for providers.
Instead of
Check(ctx context.Context, obj *T) ([]error, error)
where T is the resource type, we have
Check(ctx context.Context, obj *T, property string) error
This is done so that we can drive the calls to Check one property
at a time, allowing us to skip any that are computed. (Otherwise,
we may fail the verification erroneously.)
This has the added advantage that the Check implementations are
simpler and can simply return a single error. Furthermore, the
generated RPC code handles wrapping the result, so we can just do
return errors.New("bad");
rather than the previous reflection-laden junk
return resource.NewFieldError(
reflect.TypeOf(obj), awsservice.AWSResource_Property,
errors.New("bad"))
Tests all of our commonly used examples.
Also sets test parallelism to 10 by default
since we are I/O bound on API calls to
the resource providers.
Also avoids using larger EC2 examples in
our samples so that we can keep our test
costs lower :-).
On the first turn, we want to distinguish between a coroutine
running that owns its turn, and a coroutine that knows it doesn't
own the turn and is simply awaiting its turn. The old Meet logic
wasn't quite right; instead, we'll have the caller tell us this.
The recent change to run the interpreter and planner on separate goroutines
created the need to perform rendezvous-style synchronization between them.
Although the case of an invoked function properly tore down the synchronization
by communicating the error, we seldom directly invoke functions for JavaScript
programs because the way module entrypoint code ends up in initializers.
This requires that we propagate errors correctly out of module and class
initializers, in the standard way, so that the unwind makes its way to the top.
This fixespulumi/lumi#246.
The primary purposes of this change is to mark only immediate ouptuts
on a resource object as "output" and categories the rest as computed.
It also contains a few minor things:
* Rebase atop the latest in master.
* Always marshal unknows as their default value.
* Permit computed as the existing ID property, in addition to null.
* Tidy up some asserts.
This change updates the ID/output propagation logic to properly handle
the case of replacements, in addition to accurately conveying the fact
that an update may change the values of output properties (but not the ID).
Also fixes a formatting issue with the replacement diffing displays.
This change introduces an OpSame planning step. The reason we need
this is so that we can apply the necessary output properties, including
the ID, even as we are simply walking the plan (i.e., when we aren't
actually performing a deployment). This ensures that the object state
evolves as required to let reads of output properties propagate in the
ways necessary to reproduce past executions of the program.
* Assert new things in new places.
* Log more interesting tidbits during evaluation.
* Invoke the OnStart hook before triggering initializers.
* Tolerate nil prev snapshots during deletion calculation.
* Handle and serialize missing resource IDs as output props.
* Return "done" flag from Rendezvous.Meet.
This change refactors a number of aspects of the CLI's treatment of
steps, in line with the new scheme, and a number of other miscellaneous
and minor fixes. It also regenerates all RPC code impacted by recent renames.
This change restructures a lot more pertaining to deployments, snapshots,
environments, and the like.
The most notable change is that the notion of a deploy.Source is introduced,
which splits the responsibility between the deploy.Plan -- which simply
understands how to compute and carry out deployment plans -- and the idea
of something that can produce new objects on-demand during deployment.
The primary such implementation is evalSource, which encapsulates an
interpreter and takes a package, args, and config map, and proceeds to run
the interpreter in a distinct goroutine. It synchronizes as needed to
poke and prod the interpreter along its path to create new resource objects.
There are two other sources, however. First, a nullSource, which simply
refuses to create new objects. This can be handy when writing isolated
tests but is also used to simulate the "empty" environment as necessary to
do a complete teardown of the target environment. Second, a fixedSource,
which takes a pre-computed array of objects, and hands those, in order, to
the planning engine; this is mostly useful as a testing technique.
Boatloads of code is now changed and updated in the various CLI commands.
This further chugs along towards pulumi/lumi#90. The end is in sight.