With these changes, a user may explicitly set `deleteBeforeReplace` to
`false` in order to disable DBR behavior for a particular resource. This
is the SDK + CLI escape hatch for cases where the changes in
https://github.com/pulumi/pulumi-terraform/pull/465 cause undesirable
behavior.
* Allow resource IDs to change on reresh steps
This is a requirement for us to be able to move forward with
versions of the Terraform Azurerm provider. In v1.32.1, there was
a state migration that changed the ID format of the azure table
storage resource
We used to have a check in place for old ID being equal to new ID.
This has been changed now and we allow the change of ID to happen
in the RefreshStep
* Update pkg/resource/deploy/step.go
Co-Authored-By: Pat Gavlin <pat@pulumi.com>
These changes add support for passing `ignoreChanges` paths to resource
providers. This is intended to accommodate providers that perform diffs
between resource inputs and resource state (e.g. all Terraform-based
providers, the k8s provider when using API server dry-runs). These paths
are specified using the same syntax as the paths used in detailed diffs.
In addition to passing these paths to providers, the existing support
for `ignoreChanges` in inputs has been extended to accept paths rather
than top-level keys. It is an error to specify a path that is missing
one or more component in the old or new inputs.
Fixes#2936, #2663.
Most of these options are typically left unset. In order to make it
easier to update the lifecycle test when adding new options, collect
them in a bag s.t. most callsites can go without being updated.
If we encounter a provider with old inputs but no old outputs when reading
a checkpoint file, use the old inputs as the old outputs. This handles the
scenario where the CLI is being upgraded from a version that did not
reflect provider inputs to provider outputs, and a provider is being
upgraded from a version that did not implement `DiffConfig` to a version
that does.
Fixes https://github.com/pulumi/pulumi-kubernetes/issues/645.
* Plumbing the custom timeouts from the engine to the providers
* Plumbing the CustomTimeouts through to the engine and adding test to show this
* Change the provider proto to include individual timeouts
* Plumbing the CustomTimeouts from the engine through to the Provider RPC interface
* Change how the CustomTimeouts are sent across RPC
These errors were spotted in testing. We can now see that the timeout
information is arriving in the RegisterResourceRequest
```
req=&pulumirpc.RegisterResourceRequest{
Type: "aws:s3/bucket:Bucket",
Name: "my-bucket",
Parent: "urn:pulumi:dev::aws-vpc::pulumi:pulumi:Stack::aws-vpc-dev",
Custom: true,
Object: &structpb.Struct{},
Protect: false,
Dependencies: nil,
Provider: "",
PropertyDependencies: {},
DeleteBeforeReplace: false,
Version: "",
IgnoreChanges: nil,
AcceptSecrets: true,
AdditionalSecretOutputs: nil,
Aliases: nil,
CustomTimeouts: &pulumirpc.RegisterResourceRequest_CustomTimeouts{
Create: 300,
Update: 400,
Delete: 500,
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
},
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
}
```
* Changing the design to use strings
* CHANGELOG entry to include the CustomTimeouts work
* Changing custom timeouts to be passed around the engine as converted value
We don't want to pass around strings - the user can provide it but we want
to make the engine aware of the timeout in seconds as a float64
A resource can be imported by setting the `import` property in the
resource options bag when instantiating a resource. In order to
successfully import a resource, its desired configuration (i.e. its
inputs) must not differ from its actual configuration (i.e. its state)
as calculated by the resource's provider.
There are a few interesting state transitions hiding here when importing
a resource:
1. No prior resource exists in the checkpoint file. In this case, the
resource is simply imported.
2. An external resource exists in the checkpoint file. In this case, the
resource is imported and the old external state is discarded.
3. A non-external resource exists in the checkpoint file and its ID is
different from the ID to import. In this case, the new resource is
imported and the old resource is deleted.
4. A non-external resource exists in the checkpoint file, but the ID is
the same as the ID to import. In this case, the import ID is ignored
and the resource is treated as it would be in all cases except for
changes that would replace the resource. In that case, the step
generator issues an error that indicates that the import ID should be
removed: were we to move forward with the replace, the new state of
the stack would fall under case (3), which is almost certainly not
what the user intends.
Fixes#1662.
Thse changes make a subtle but critical adjustment to the process the
Pulumi engine uses to determine whether or not a difference exists
between a resource's actual and desired states, and adjusts the way this
difference is calculated and displayed accordingly.
Today, the Pulumi engine get the first chance to decide whether or not
there is a difference between a resource's actual and desired states. It
does this by comparing the current set of inputs for a resource (i.e.
the inputs from the running Pulumi program) with the last set of inputs
used to update the resource. If there is no difference between the old
and new inputs, the engine decides that no change is necessary without
consulting the resource's provider. Only if there are changes does the
engine consult the resource's provider for more information about the
difference. This can be problematic for a number of reasons:
- Not all providers do input-input comparison; some do input-state
comparison
- Not all providers are able to update the last deployed set of inputs
when performing a refresh
- Some providers--either intentionally or due to bugs--may see changes
in resources whose inputs have not changed
All of these situations are confusing at the very least, and the first
is problematic with respect to correctness. Furthermore, the display
code only renders diffs it observes rather than rendering the diffs
observed by the provider, which can obscure the actual changes detected
at runtime.
These changes address both of these issues:
- Rather than comparing the current inputs against the last inputs
before calling a resource provider's Diff function, the engine calls
the Diff function in all cases.
- Providers may now return a list of properties that differ between the
requested and actual state and the way in which they differ. This
information will then be used by the CLI to render the diff
appropriately. A provider may also indicate that a particular diff is
between old and new inputs rather than old state and new inputs.
Fixes#2453.
This commit touches an intersection of a few different provider-oriented
features that combined to cause a particularly severe bug that made it
impossible for users to upgrade provider versions without seeing
replacements with their resources.
For some context, Pulumi models all providers as resources and places
them in the snapshot like any other resource. Every resource has a
reference to the provider that created it. If a Pulumi program does not
specify a particular provider to use when performing a resource
operation, the Pulumi engine injects one automatically; these are called
"default providers" and are the most common ways that users end up with
providers in their snapshot. Default providers can be identified by
their name, which is always prefixed with "default".
Recently, in an effort to make the Pulumi engine more flexible with
provider versions, it was made possible for the engine to have multiple
default providers active for a provider of a particular type, which was
previously not possible. Because a provider is identified as a tuple of
package name and version, it was difficult to find a name for these
duplicate default providers that did not cause additional problems. The
provider versioning PR gave these default providers a name that was
derived from the version of the package. This proved to be a problem,
because when users upgraded from one version of a package to another,
this changed the name of their default provider which in turn caused all
of their resources created using that provider (read: everything) to be
replaced.
To combat this, this PR introduces a rule that the engine will apply
when diffing a resource to determine whether or not it needs to be
replaced: "If a resource's provider changes, and both old and new
providers are default providers whose properties do not require
replacement, proceed as if there were no diff." This allows the engine
to gracefully recognize and recover when a resource's default provider changes
names, as long as the provider's config has not changed.
Previously, when the CLI wanted to install a plugin, it used a special
method, `DownloadPlugin` on the `httpstate` backend to actually fetch
the tarball that had the plugin. The reason for this is largely tied
to history, at one point during a closed beta, we required presenting
an API key to download plugins (as a way to enforce folks outside the
beta could not download them) and because of that it was natural to
bake that functionality into the part of the code that interfaced with
the rest of the API from the Pulumi Service.
The downside here is that it means we need to host all the plugins on
`api.pulumi.com` which prevents community folks from being able to
easily write resource providers, since they have to manually manage
the process of downloading a provider to a machine and getting it on
the `$PATH` or putting it in the plugin cache.
To make this easier, we add a `--server` argument you can pass to
`pulumi plugin install` to control the URL that it attempts to fetch
the tarball from. We still have perscriptive guidence on how the
tarball must be
named (`pulumi-[<type>]-[<provider-name>]-vX.Y.Z.tar.gz`) but the base
URL can now be configured.
Folks publishing packages can use install scripts to run `pulumi
plugin install` passing a custom `--server` argument, if needed.
There are two improvements we can make to provide a nicer end to end
story here:
- We can augment the GetRequiredPlugins method on the language
provider to also return information about an optional server to use
when downloading the provider.
- We can pass information about a server to download plugins from as
part of a resource registration or creation of a first class
provider.
These help out in cases where for one reason or another where `pulumi
plugin install` doesn't get run before an update takes place and would
allow us to either do the right thing ahead of time or provide better
error messages with the correct `--server` argument. But, for now,
this unblocks a majority of the cases we care about and provides a
path forward for folks that want to develop and host their own
resource providers.
Adds a new resource option `aliases` which can be used to rename a resource. When making a breaking change to the name or type of a resource or component, the old name can be added to the list of `aliases` for a resource to ensure that existing resources will be migrated to the new name instead of being deleted and replaced with the new named resource.
There are two key places this change is implemented.
The first is the step generator in the engine. When computing whether there is an old version of a registered resource, we now take into account the aliases specified on the registered resource. That is, we first look up the resource by its new URN in the old state, and then by any aliases provided (in order). This can allow the resource to be matched as a (potential) update to an existing resource with a different URN.
The second is the core `Resource` constructor in the JavaScript (and soon Python) SDKs. This change ensures that when a parent resource is aliased, that all children implicitly inherit corresponding aliases. It is similar to how many other resource options are "inherited" implicitly from the parent.
Four specific scenarios are explicitly tested as part of this PR:
1. Renaming a resource
2. Adopting a resource into a component (as the owner of both component and consumption codebases)
3. Renaming a component instance (as the owner of the consumption codebase without changes to the component)
4. Changing the type of a component (as the owner of the component codebase without changes to the consumption codebase)
4. Combining (1) and (3) to make both changes to a resource at the same time
For provider plugins, the gRPC interfaces expect that a URN would be
included as part of the DiffConfig/CheckConfig request, which means we
need to flow this value into our Provider interface.
This change does that.
We have many cases where we want to do the following:
deployment -> snapshot -> process snapshot -> deployment
We now retain information in the snapshot about the secrets manager
that was used to construct it, so in these round trip cases, we can
re-use the existing manager.
A new `Secret` property value is introduced, and plumbed across the
engine.
- When Unmarshalling properties /from/ RPC calls, we instruct the
marshaller to retain secrets, since we now understand them in the
rest of the engine.
- When Marshalling properties /to/ RPC calls, we use or tracked data
to understand if the other side of the connection can accept
secrets. If they can, we marshall them in a similar manner to assets
where we have a special object with a signiture specific for secrets
and an underlying value (which is the /plaintext/ value). In cases
where the other end of the connection does not understand secrets,
we just drop the metadata and marshal the underlying value as we
normally would.
- Any secrets that are passed across the engine events boundary are
presently passed as just `[secret]`.
- When persisting secret values as part of a deployment, we use a rich
object so that we can track the value is a secret, but right now the
underlying value is not actually encrypted.
This command exposes a new resource `Invoke` operation,
`pulumi:pulumi:readStackResourceOutputs` which retrieves all resource
outputs for some user-specified stack, not including those deleted.
Fixes#2600.
`pulumi query` is designed, essentially, as a souped-up `exec`. We
execute a query program, and add a few convenience constructs (e.g., the
default providers that give you access to things like `getStack`).
Early in the design process, we decided to not re-use the `up`/update
path, both to minimize risk to update operations, and to simplify the
implementation.
This commit will add this "parallel query universe" into the engine
package. In particular, this includes:
* `QuerySource`, which executes the language provider running the query
program, and providing it with some simple constructs, such as the
default provider, which provides access to `getStack`. This is much
like a very simplified `EvalSource`, though notably without any of the
planning/step execution machinery.
* `queryResmon`, which disallows all resource operations, except the
`Invoke` that retrieves the resource outputs of some stack's last
snapshot. This is much like a simplified `resmon`, but without any of
the provider resolution, and without and support for resource
operations generally.
* Various static functions that pull together miscellaneous things
needed to execute a query program. Notably, this includes gathering
language plugins.
`pulumi query` needs to exec a query program in some directory, just as
`pulumi up` does. But, it won't use the planning/step execution
machinery at all. One small piece these two paths have in common is that
they both can use the `planResult#Chdir`. So, this commit will move this
to `fsutil` so they can both use it.
This change adds a --json flag to the preview command, enabling
basic JSON serialization of preview plans. This effectively flattens
the engine event stream into a preview structure that contains a list
of steps, diagnostics, and summary information. Each step contains
the deep serialization of resource state, in addition to metadata about
the step, such as what kind of operation it entails.
This is a partial implementation of pulumi/pulumi#2390. In particular,
we only support --json on the `preview` command itself, and not `up`,
meaning that it isn't possible to serialize the result of an actual
deployment yet (thereby limiting what you can do with outputs, etc).
Fixes#2277.
Adds a new ignoreChanges resource option that allows specifying a list of property names whose values will be ignored during updates. The property values will be used for Create, but will be ignored for purposes of updates, and as a result also cannot trigger replacements.
This is a feature of the Pulumi engine, not of the resource providers, so no new logic is needed in providers to support this feature. Instead, the engine simply replaces the values of input properties in the goal state with old inputs for properties marked as ignoreChanges.
Currently, only top level properties may be specified in ignoreChanges. In the future, this could be extended to support paths to nested properties (including into array elements) with a JSONPath/JMESPath syntax.
* Load specific provider versions if requested
As part of pulumi/pulumi#2389, we need the ability for language hosts to
tell the engine that a particular resource registration, read, or invoke
needs to use a particular version of a resource provider. This was not
previously possible before; the engine prior to this commit loaded
plugins from a default provider map, which was inferred for every
resource provider based on the contents of a user's package.json, and
was itself prone to bugs.
This PR adds the engine support needed for language hosts to request a
particular version of a provider. If this occurs, the source evaluator
specifically records the intent to load a provider with a given version
and produces a "default" provider registration that requests exactly
that version. This allows the source evaluator to produce multiple
default providers for a signle package, which was previously not
possible.
This is accomplished by having the source evaluator deal in the
"ProviderRequest" type, which is a tuple of version and package. A
request to load a provider whose version matches the package of a
previously loaded provider will re-use the existing default provider. If
the version was not previously loaded, a new default provider is
injected.
* CR Feedback: raise error if semver is invalid
* CR: call String() if you want a hash key
* Update pkg/resource/deploy/providers/provider.go
Co-Authored-By: swgillespie <sean@pulumi.com>
Fixes#2633.
Currently when a user runs `refresh` and a resource is in a state of
error, the `refresh` will fail and the resource state will not be
persisted. This can make it vastly harder to incrementally fix
infrastructure. The issue mentioned above explains more of the
historical context, as well as some specific failure modes.
This commit resolves this issue by causing refresh to *not* report an
error in this case, and instead to simply log a warning that the
`refresh` has recognized that the resource is in an unhealthy state
during state sync.
This commit switches from dep to Go 1.12 modules for tracking Pulumi
dependencies. Rather than _building_ using Go modules, we instead use the `go
mod vendor` command to populate a vendor tree in the same way as `dep ensure`
was previously doing.
In order to prevent checksum mismatches, it was necessary to also update CI to
use Go 1.12 instead of 1.11 - which also necessitated fixing some linting errors
which appeared with the upgraded golangci-lint for 1.12.
* Load default providers deterministically
This commit adds a new algorithm for deriving a list of default
providers from the set of plugins reported from the language host and
from the snapshot. If the language host reports a set of plugins,
default providers are sourced directly from that set, otherwise default
providers are sourced from the full set of plugins, including ones from
the snapshot.
When multiple versions of the same provider are requested, the newest
version of that provider is always select as the default provider.
* Add CHANGELOG.md entry
* Skip the language host's plugins if it reports no resource plugins
* CR feedback
* CR: Log when skipping non resource plugin
* Install missing plugins on startup
This commit addresses the problem of missing plugins by scanning the
snapshot and language host on startup for the list of required plugins
and, if there are any plugins that are required but not installed,
installs them. The mechanism by which plugins are installed is exactly
the same as 'pulumi plugin install'.
The installation of missing plugins is best-effort and, if it fails,
will not fail the update.
This commit addresses pulumi/pulumi-azure#200, where users using Pulumi
in CI often found themselves missing plugins.
* Add CHANGELOG
* Skip downloading plugins if no client provided
* Reduce excessive test output
* Update Gopkg.lock
* Update pkg/engine/destroy.go
Co-Authored-By: swgillespie <sean@pulumi.com>
* CR: make pluginSet a newtype
* CR: Assign loop induction var to local var
Various providers use properties that begin with "__" to represent
internal metadata that should not be presented to the user. These
changes look for such properties and elide them when displaying diffs.
These changes take advantage of the newly-added support for returning
inputs from Read to update a resource's inputs as part of a refresh.
As a consequence, the Pulumi engine will now properly detect drift
between the actual state of a resource and the desired state described
by the program and generate appropriate update or replace steps.
As part of these changes, a resource's old inputs are now passed to the
provider when performing a refresh. The provider can take advantage of
this to maintain the accuracy of any additional data or metadata in the
resource's inputs that may need to be updated during the refresh.
This is required for the complete implementation of
https://github.com/pulumi/pulumi-terraform/pull/349. Without access to
the old inputs for a resource, TF-based providers would lose all
information about default population during a refresh.
If a provider returns information about the top-level properties that
differ, use those keys to filter the diffs that are rendered to the
user.
Fixes#2453.
These changes add a new flag to the various `ResourceOptions` types that
indicates that a resource should be deleted before it is replaced, even
if the provider does not require this behavior. The usual
delete-before-replace cascade semantics apply.
Fixes#1620.
In general, a "delete" in Pulumi is destroying an actual physical
resource. In the case of a read resource, however, the delete is
merely removing the resource from the stack; the physical resource
is not affected. These changes attempt to clarify this situation by
using the term "discard" rather than "delete".
Fixes#2015.
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
This test had been intermittently failing due to a race condition. Its
implementation of `plugin.Provider.Read` was intended to ensure that
the cancellation of a refresh operation occurred. As written, it was
only able to ensure that the cancellation was requested.
These changes ensure that cancellation has been acknowledged by the engine by
implementing providing an implementation for `plugin.Provider.Cancel`
that closes a channel on which the implementation of `Read` waits.