When serializing values, if the other end of the resource monitor
interface does not support secrets (e.g. it is an older CLI), don't
pass secrets to it.
`Output<T>` now tracks if an output represents secret data or
not. When secret, it is marshalled as a secret value and we signal to
the resource monitor that it is safe to return secret values to us.
The `pulumi` module exports a new functiion, `secret<T>` which works
in the same was a `output<T>` except that it marks the underlying
output as a secret.
This secret bit flows as you would expect across `all`'s and
`apply`'s.
Note that in process memory, the raw value is still present, when you
run an `apply` for a secret output, you are able to see the raw
value. In addition, if you capture a secret output with a lambda, the
raw value will be present in the captured source text.
We changed the `pulumi update` command to be `pulumi up` a while back
(`update` is an alias of `up`). This change just makes it so we refer to
the actual command, `pulumi up`, instead of the older `pulumi update`.
In previous commits, we have changed the language plugin protocol to
allow the host to communicate that the plugin is meant to boot in "query
mode." In nodejs, this involves not doing things like registering the
default stack resource. This commit will implement this functionality.
* NodeJS: allow callers to override provider version
* Python: allow callers to override provider version
* NodeJS: add version for invoke
* Python: add version to invoke
* NodeJS: add tests for ReadResource
* Post-merge cleanup
* update doc comments
Fixes#2277.
Adds a new ignoreChanges resource option that allows specifying a list of property names whose values will be ignored during updates. The property values will be used for Create, but will be ignored for purposes of updates, and as a result also cannot trigger replacements.
This is a feature of the Pulumi engine, not of the resource providers, so no new logic is needed in providers to support this feature. Instead, the engine simply replaces the values of input properties in the goal state with old inputs for properties marked as ignoreChanges.
Currently, only top level properties may be specified in ignoreChanges. In the future, this could be extended to support paths to nested properties (including into array elements) with a JSONPath/JMESPath syntax.
* Enable unit testing for Pulumi programs
This change enables rudimentary unit testing of your Pulumi programs, by introducing a `PULUMI_TEST_MODE` envvar that, when set, allows programs to run without a CLI. That includes
* Just being able to import your Pulumi modules, and test ordinary functions -- which otherwise would have often accidentally triggered the "Not Running in a CLI" error message
* Being able to verify a subset of resource properties and shapes, with the caveat that outputs are not included, due to the fact that this is a perpetual "dry run" without any engine operations occurring
In principle, this also means you can attach a debugger and step through your code.
* Finish the unit testing features
This change
1) Incorporates CR feedback, namely requiring that test mode be
explicitly enabled for any of this to work.
2) Implements Python support for the same capabilities.
3) Includes tests for both JavaScript and Python SDKs.
* Add a note on unit testing to the CHANGELOG
* Use Node 8 friendly assert API
* Embellish the CHANGELOG entry a bit
This update includes several changes to core `@pulumi/pulumi` constructs that will not play nicely
in side-by-side applications that pull in prior versions of this package. As such, we are rev'ing
the minor version of the package from 0.16 to 0.17. Recent version of `pulumi` will now detect,
and warn, if different versions of `@pulumi/pulumi` are loaded into the same application. If you
encounter this warning, it is recommended you move to versions of the `@pulumi/...` packages that
are compatible. i.e. keep everything on 0.16.x until you are ready to move everything to 0.17.x.
### Improvements
- `Output<T>` now 'lifts' property members from the value it wraps, simplifying common coding patterns. Note: this wrapping only happens for POJO values, not `Output<Resource>`s.
- Depending on a **Component** Resource will now depend on all other Resources parented by that
Resource. This will help out the programming model for Component Resources as your consumers can
just depend on a Component and have that automatically depend on all the child Resources created
by that Component. Note: this does not apply to a **Custom** resource. Depending on a
CustomResource will still only wait on that single resource being created, not any other Resources
that consider that CustomResource to be a parent.
* Revert "Make toString and toJSON internal (#2489)"
This reverts commit 7579b84f73.
* Revert "Update error message to point at docs. (#2488)"
This reverts commit 9156c26a2e.
* Revert "Throw on Output.toString and toJSON (#2486)"
This reverts commit c33b4505c0.
These changes add a new flag to the various `ResourceOptions` types that
indicates that a resource should be deleted before it is replaced, even
if the provider does not require this behavior. The usual
delete-before-replace cascade semantics apply.
Fixes#1620.
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
This changes the input type for dependsOn from simply
`Resource[] | Resource` to `Input<Input<Resource>[]> | Input<Resource>`.
This permits `Output<Resource>`s, etc in addition to
`Promise<Resource>`s. The logic for dynamically unpicking the right
types and recursing through the data structures isn't straightforward,
but I've written a test for all of the interesting permutations.
This fixespulumi/pulumi#991.
* Make v8 primitives async as there is no way to avoid async in node11.
* Simplify API.
* Move processing of well-known globals into the v8 layer.
We'll need this so that we can map from RemoteObjectIds back to these well known values.
* Remove unnecesssary check.
* Cleanup comments and extract helper.
* Introduce helper bridge method for the simple case of making an entry for a string.
* Make functions async. They'll need to be async once we move to the Inspector api.
* Make functions async. They'll need to be async once we move to the Inspector api.
* Make functions async. They'll need to be async once we move to the Inspector api.
* Move property access behind helpers so they can move to the Inspector API in the future.
* Only call function when we know we have a Function. Remove redundant null check.
* Properly serialize certain special JavaScript number values that JSON serialization cannot handle.
* Only marshall across the 'source' and 'flags' for a RegExp when serializing.
* Add a simple test to validate a regex without flags.
* Extract functionality into helper method.
* Add test with complex output scenarios.
* Output serialization needs to avoid recursively trying to serialize a serialized value.
* Introduce indirection for introspecting properties of an object.
* Use our own introspection API for examining an Array.
* Hide direct property access through API indirection.
* Produce values like the v8 Inspector does.
* Compute the module map asynchronously. Will need that when mapping mirrors instead.
* Cleanup a little code in closure creation.
* Get serialization working on Node11 (except function locations).
* Run tests in the same order on <v11 and >=v11
* Make tests run on multiple versions of node.
* Rename file to make PR simpler to review.
* Cleanup.
* Be more careful with global state.
* Remove commented line.
* Only allow getting a session when on Node11 or above.
* Promisify methods.
This change adds some new constructors for output properties:
1) We alias `Output.create` to `output`, more like Promise's various
construction methods. This reads better and is more discoverable.
2) A new `Output.createMap` function will accept an array of inputs,
along with a selector function for key/value pairs, and produces
an output map with said keys and values inside of it.
3) A new `Output.createGroupByMap` functon will similarly accept an
array of inputs and a key/value selector, however it creates an
output map with said keys, but where values are arrays of values,
and all duplicate keys will lead to appending to said arrays.
Tests to come in a subsequent checkin.
* Fail closure serialization in Node 11
Node 11 changed many of the intrinsics that we depend upon for closure
serialization, so until we fix the underlying issues this commit lazily
fails if a closure is serialized when running on Node 11.
* CR feedback
Some providers (namely Kubernetes) require unbounded parallelism in
order to function correctly. This commit enables the engine to operate
in a mode with unbounded parallelism and switches to that mode by
default.
Instead of looping forever, due to some recent improvements in engine
error handling it's sufficient for a language host to exit cleanly with
a zero exit code when the resource monitor is shutting down.
* Revert RunError behavior. Introduce new ResourceError for errors associated with a resource.
* Fix docs.
* Use resource error.
* Use ResourceError in more places.
* Use ResourceError in a few more places.
* Throw a resource error.
* Make required.
* Revert this.
* Lint.
* Only report errors once.
* Better comment.