Use `result.Result` in more places, so when a confirmation prompt is
declined, we just return `result.Bail()` after printing a message
without the `error: ` prefix.
Fixes#2070
* Load default providers deterministically
This commit adds a new algorithm for deriving a list of default
providers from the set of plugins reported from the language host and
from the snapshot. If the language host reports a set of plugins,
default providers are sourced directly from that set, otherwise default
providers are sourced from the full set of plugins, including ones from
the snapshot.
When multiple versions of the same provider are requested, the newest
version of that provider is always select as the default provider.
* Add CHANGELOG.md entry
* Skip the language host's plugins if it reports no resource plugins
* CR feedback
* CR: Log when skipping non resource plugin
When using a dynamic provider, the following messages are printed,
because we did not update the dynamic provider when we added these new
RPCs:
```
Method handler checkConfig for /pulumirpc.ResourceProvider/CheckConfig expected but not provided
Method handler diffConfig for /pulumirpc.ResourceProvider/DiffConfig expected but not provided
```
Given that we don't do anything for the `configure` RPC today, we can
also just no-op these RPCs as well.
`pulumi stack rename` allows you to change the name of an existing
stack. This operation is non-distructive, however it is possible that
the next update will show additional changes to resources, if the
pulumi program uses the value of `getStack()` as part of a resource
name.
* Install missing plugins on startup
This commit addresses the problem of missing plugins by scanning the
snapshot and language host on startup for the list of required plugins
and, if there are any plugins that are required but not installed,
installs them. The mechanism by which plugins are installed is exactly
the same as 'pulumi plugin install'.
The installation of missing plugins is best-effort and, if it fails,
will not fail the update.
This commit addresses pulumi/pulumi-azure#200, where users using Pulumi
in CI often found themselves missing plugins.
* Add CHANGELOG
* Skip downloading plugins if no client provided
* Reduce excessive test output
* Update Gopkg.lock
* Update pkg/engine/destroy.go
Co-Authored-By: swgillespie <sean@pulumi.com>
* CR: make pluginSet a newtype
* CR: Assign loop induction var to local var
Various providers use properties that begin with "__" to represent
internal metadata that should not be presented to the user. These
changes look for such properties and elide them when displaying diffs.
These changes take advantage of the newly-added support for returning
inputs from Read to update a resource's inputs as part of a refresh.
As a consequence, the Pulumi engine will now properly detect drift
between the actual state of a resource and the desired state described
by the program and generate appropriate update or replace steps.
As part of these changes, a resource's old inputs are now passed to the
provider when performing a refresh. The provider can take advantage of
this to maintain the accuracy of any additional data or metadata in the
resource's inputs that may need to be updated during the refresh.
This is required for the complete implementation of
https://github.com/pulumi/pulumi-terraform/pull/349. Without access to
the old inputs for a resource, TF-based providers would lose all
information about default population during a refresh.
Originally, `pulumi new` did not run `up` after generating a project. To
help users get a deployed stack as quickly as possible, we changed
`pulumi new` to run an initial deployment at the end of its operation.
Users would first see a preview and get to decide whether to proceed
with an initial deployment, and then continue to iterate from there.
Note that this would only happen for nodejs projects
(TypeScript/JavaScript). We would not run `up` for Python projects as we
require the user to run `pip install` in a virtualenv, so we'd print
instructions with the necessary commands the user must run instead.
Running `up` as part of `pulumi new` for nodejs projects has ended up
being more confusing than helpful for new users, and annoying for
experienced users. New users aren't expecting `pulumi new` to run an
initial deployment after generating the project (they haven't even
looked at the project source yet). Experienced users find it frustrating
as you typically want to just generate the project, and don't want to
have to wait for the preview just to decline running the update.
This change reverts `pulumi new` back to not running `up` automatically
for nodejs projects. Instead, like with Python projects, at the end of
the operation, we print instructions to the user to run `pulumi up` to
deploy the project.
If a provider returns information about the top-level properties that
differ, use those keys to filter the diffs that are rendered to the
user.
Fixes#2453.
Show `brew upgrade pulumi` as the upgrade message when the currently
running pulumi executable is on macOS and running from the brew install
directory.
This update includes several changes to core `@pulumi/pulumi` constructs that will not play nicely
in side-by-side applications that pull in prior versions of this package. As such, we are rev'ing
the minor version of the package from 0.16 to 0.17. Recent version of `pulumi` will now detect,
and warn, if different versions of `@pulumi/pulumi` are loaded into the same application. If you
encounter this warning, it is recommended you move to versions of the `@pulumi/...` packages that
are compatible. i.e. keep everything on 0.16.x until you are ready to move everything to 0.17.x.
### Improvements
- `Output<T>` now 'lifts' property members from the value it wraps, simplifying common coding patterns. Note: this wrapping only happens for POJO values, not `Output<Resource>`s.
- Depending on a **Component** Resource will now depend on all other Resources parented by that
Resource. This will help out the programming model for Component Resources as your consumers can
just depend on a Component and have that automatically depend on all the child Resources created
by that Component. Note: this does not apply to a **Custom** resource. Depending on a
CustomResource will still only wait on that single resource being created, not any other Resources
that consider that CustomResource to be a parent.
* Look for exact match when loading plugins
Pulumi's current behavior when loading plugins is surprising in that it
will attempt to load the "latest" provider binary instead of exactly the
version that was requested. Since provider binaries and provider
packages are tied together and versioned together, this is going to be
problematic if a provider makes a breaking change.
Although there are other issues in this area, this commit fixes the
arguably bug-like behavior of loading the latest plugin and instead opts
to load the plugin that exactly the requested semver range. Today, the
engine will never ask for anything other than an exact version match.
Since this is a breaking change, this commit also includes an
environment variable that allows users to return back to the "old"
plugin loading behavior if they are broken. The intention is that this
escape hatch can be removed in a future release once we are confident
that this change does not break people.
* CR feedback
* Use SelectCompatiblePlugin for HasPluginGTE check
* Fix an issue with empty ID for CustomResource
The Python runtime was checking the ID field it receives from the engine
against None, assuming that the engine would not set the ID field if one
was not present. However, it does set the ID field; it is set to the
empty string when an ID is not known.
This commit fixes an issue that can cause certain IDs to be erroneously
considered to be known during previews, which can cause problems during
the Check phase of resources that directly reference IDs of other
resources.
* Add CHANGELOG
* Enable delete parallelism for Python
* Add CHANGELOG.md entry
* Expand changelog message - upgrade to Python 3
* Rework stack rm test
The service now allows removing a stack if it just contains the top
level `pulumi:pulumi:Stack` resource, so we need to actually create
another resource before `stack rm` fails telling you to pass
`--force`.
Fixes#2444
When `pulumi stack rm` is run against a stack with resources, the
service will respond with an error if `--force` is not
passed. Previously we would just dump the contents of this error and
it looked something like:
`error: [400] Bad Request: Stack still has resources.`
We now handle this case more gracefully, showing our usual "this stack
still has resources" error like we would for the local backend.
Fixes#2431
These changes add a new flag to the various `ResourceOptions` types that
indicates that a resource should be deleted before it is replaced, even
if the provider does not require this behavior. The usual
delete-before-replace cascade semantics apply.
Fixes#1620.
Because of the change to include a stack's project as part of its
identity in the service, the names passed to StackReference now
require the project name as well.
Improve the error message when they do not include them.
This change starts to use a stack's project name as part of it's
identity when talking to the cloud backend, which the Pulumi Service
now supports.
When displaying or parsing stack names for the cloud backend, we now
support the following schemes:
`<stack-name>`
`<owner-name>/<stack-name>`
`<owner-name>/<project-name>/<stack-name>`
When the owner is not specificed, we assume the currently logged in
user (as we did before). When the project name is not specificed, we
use the current project (and fail if we can't find a `Pulumi.yaml`)
Fixes#2039
Some changes to `pulumi new` to improve the experience:
- Color the default values for config differently to make them stand
out better
- Mention that `new` will also perform an initial deployment
- Add more vertical whitespace between steps in the process
- Print message indicating the "Installing dependencies" step is
complete
- After "project is ready to go", add a note about doing an initial
deployment
- Output follow-up command to run when an update fails
- Go back to showing the `npm install` output as `npm` doesn't always
return an error code when it runs into problems
This supports using `--json` to get configuration information in a
structured way.
The objects we return have the following schema:
```
{
name: string;
value: string?;
secret: bool;
}
```
In the case of `pulumi config` when --show-secrets is not passed, and
there are secret values, the `value` property of the object for that
configuration value will not be set. This differs from the normal
rendering where we show `[secret]`.
Contributes To #496