* Do not read TGZs into memory.
This runs a serious risk of exhausting the memory on lower-end machines
(e.g. certain CI VMs), especially given the potential size of some
plugins.
* CHANGELOG
* fixes
The step generator was incorrectly tracking goal states for
old resources, which could lead to a panic if the resource
was removed in the update. This fix only generates goal
states for resources that exist in the updated program.
Now that resources are serialized as refs, ComponentResources
may try to unmarshal local resource refs before they are
initialized during the RegisterResource step.
This change avoids that issue by skipping Output marshaling
for local ComponentResources during the RegisterResource step.
These Outputs will be handled instead during the
RegisterResourceOutputs step.
Co-authored-by: Pat Gavlin <pat@pulumi.com>
The step generator applies `ignoreChanges` pre-processing for all
resources by copying old input values to the new goal for any properties
mentioned in the `ignoreChanges` list. However, this pre-processing
depends on the existence of prior inputs, which by definition does not
exist for a resource being imported prior to the issuance of the
`ImportStep`. These changes add this processing to the implementation of
`ImportStep`, using the inputs read from the provider as the prior
inputs.
- Add component ref coverage to the existing test
- Add coverage for a downlevel SDK communicating with an engine that
supports resource refs
- Add coverage for a downlevel engine communicating with an SDK that
supports resource refs
As part of improving coverage, these changes add a knob to explicitly
disable resource refs in the engine without the use of the environment
variable. The environment variable is now only read by the CLI, and has
been restored to its prior polarity (i.e. `PULUMI_ENABLE_RESOURCE_REFERENCES`).
Disable resource ref support until https://github.com/pulumi/pulumi-kubernetes/issues/1405
is fixed. This bug currently affects Python users with recent versions of the pulumi SDK
who are using the pulumi-kubernetes provider.
* Enable resource reference feature by default
Unless the PULUMI_DISABLE_RESOURCE_REFERENCES flag
is explicitly set to a truthy value, the resource reference feature is now
enabled by default.
* Set AcceptResources in the language SDKs
This can be disabled by setting the `PULUMI_DISABLE_RESOURCE_REFERENCES` environment variable to a truthy value.
Co-authored-by: Justin Van Patten <jvp@justinvp.com>
This re-applies the fix in 5857 to make credentials.json writes concurrency safe.
The original fix used `path.Dir` instead of `filepath.Dir` - which led to not placing the temp file in the same folder (and drive) as the renamed file target. This led to errors on Windows environments where the working directory was on a different drive than the `~/.pulumi` directory. The change to use `filepath.Dir` instead ensures that even on Windows, the true directory containing the credentials file is used for the temp file as well.
Fixes#3877.
* Properly resize arrays when adding
The current logic attempts to update the array but, because
append may need to allocate a new array with adequate space,
the code can currently leave dest referring to the old,
under-sized array. The solution is to use the set(dest)
logic that already exists and is used for the IsNull case.
Added a test case that would fail before this fix and now passes.
This fixespulumi/pulumi#5871.
* Add CHANGELOG entry
Fixes: #5452
When the user is requesting to change the secrets provider to a
passphrase provider, we now calculate that has been requested.
This means, we will prompt for a new passphrase for use in encrypting
the stack.
```
pulumi stack change-secrets-provider passphrase
Enter your passphrase to unlock config/secrets
(set PULUMI_CONFIG_PASSPHRASE or PULUMI_CONFIG_PASSPHRASE_FILE to remember):
Enter your new passphrase to protect config/secrets:
Re-enter your new passphrase to confirm:
Migrating old configuration and state to new secrets provider
Enter your passphrase to unlock config/secrets
(set PULUMI_CONFIG_PASSPHRASE or PULUMI_CONFIG_PASSPHRASE_FILE to remember):
```
Implement GetRequiredPlugins for Python, which determines the plugins
required by the program.
Also, if the `virtualenv` runtime option is set, and the specified
virtual directory is missing or empty, automatically create it and
install dependencies into it.
Running `pulumi` operations in parallel could occasionally result in truncating the `~/.pulumi/credentials.json` file and reading that truncated file from another process before the content could be written.
Instead, use `os.Rename` to atomically replace the file contents.
Concurrent `pulumi` operations could still compete for who gets to write the file first, and could lead to surprising results in some extreme cases. But we should not see the corrupted file contents any longer.
Fixes#3877.
To de-risk the Pulumi v2.15.0 release, temporarily revert 679d40950f. Use of resource references will require `PULUMI_EXPERIMENTAL_RESOURCE_REFERENCES=1` to be set until the feature has been enabled by default.
* Correctly rename stack files during a rename
This fixespulumi/pulumi#4463, by renaming a stack's configuration
file based on its stack-part, and ignoring the owner-part. Our
workspace system doesn't recognize configuration files with fully
qualified names. That, by the way, causes problems if we have
multiple stacks in different organizations that share a stack-part.
The fix here is simple: propagate the new StackReference from the
Rename operation and rely on the backend's normalization to a
simple name, and then use that the same way we are using a
StackReference to determine the path for the origin stack.
An alternative fix is to recognize fully qualified config files,
however, there's a fair bit of cleanup we will be doing as part of
https://github.com/pulumi/pulumi/issues/2522 and
https://github.com/pulumi/pulumi/issues/4605, so figured it is best
to make this work the way the system expects first, and revisit it
as part of those overall workstreams. I also suspect we may want to
consider changing the default behavior here as part of
https://github.com/pulumi/pulumi/issues/5731.
Tests TBD; need some advice on how best to test this since it
only happens with our HTTP state backend -- all integration tests
appear to use the local filestate backend at the moment.
* Add a changelog entry for bug fix
* Add some stack rename tests
* Fix a typo
* Address CR feedback
* Make some logic clearer
Use "parsedName" instead of "qn", add a comment explaining why
we're doing this, and also explicitly ignore the error rather
than implicitly doing so with _.
Fixes: #5835
when rotating a key in the Azure KeyVault secrets provider, we had
the following error:
```
error: secrets (code=InvalidArgument): keyvault.BaseClient#Decrypt: Failure responding to request: StatusCode=400 -- Original Error: autorest/azure: Service returned an error. Status=400 Code="BadParameter" Message="The parameter is incorrect.\r\n"
```
This was because we were not regenerating the EncrytpionKey when
we were changing the secrets provider. Therefore, we now ensure
that this key is regenerated and we can successfully change the secrets provider
```
▶ pulumi stack init dev --secrets-provider="azurekeyvault://stack72kv10.vault.azure.net/keys/pulumi-secret"
Created stack 'dev'
▶ pulumi config set MyDBRootPassword Password1234! --secret
▶ pulumi config --show-secrets
KEY VALUE
MyDBRootPassword Password1234!
▶ pulumi stack change-secrets-provider "azurekeyvault://stack72kv20.vault.azure.net/keys/pulumi-secret"
▶ pulumi config --show-secrets
KEY VALUE
MyDBRootPassword Password1234!
```
The PULUMI_BACKEND_URL env var allows specifying the backend to use instead of deferring to the project or the ~/.pulumi/credentials.json file to decide on the "current" backend. This allows for using Pulumi without a dependence on this piece of global filesystem state, so that each `pulumi` invocation can control the exact backend it want's to operate on, without having to do stateful `pulumi login`/`pulumi logout` operations.
This is especially useful for automation scenarios like Automation API generally (and effectively solves https://github.com/pulumi/pulumi/issues/5591), or https://github.com/pulumi/pulumi-kubernetes-operator/issues/83 specifically.
This also makes things like efe7a599e6/dist/actions/entrypoint.sh (L10) less necessary, and possible to accomplish for any containerized `pulumi` execution without the need for this logic to be embedded in bash scripts wrapping the CLI.
Fixes: #5626
It used to be:
```
Policy Violations:
[advisory] aws v0.1.20200912 allowed-image-owner (demo-aws-ts-webserver-server-0: aws:ec2/instance:Instance)
Check machine image is from an approved publisher.
Publisher [137112412989] is not one of [self,099720109477].
```
Notice that it was name: type
We would rather this was type: name
```
Policy Violations:
[advisory] aws v0.1.20200912 allowed-image-owner (aws:ec2/instance:Instance: demo-aws-ts-webserver-server-0)
Check machine image is from an approved publisher.
Publisher [137112412989] is not one of [self,099720109477].
```
The way `pulumi new` installs dependencies for .NET projects is slightly different from other languages. For Node.js, Python, and Go, `pulumi new` runs the appropriate command to install project dependencies (e.g. `npm install`, `pip install`, or `go mod download`). For .NET, it calls the same routine used during `preview|up` to ensure required plugins are installed. For .NET, this ends up running `dotnet build` which implicitly installs Nuget packages, builds the project, and also attempts to determine and install the needed Pulumi plugins. When this operation runs during `preview|up`, and there are failures installing a plugin, the error is logged, but deliberately not returned, because an error will be shown for missing plugins later on during the `preview|up` operation. However, during `pulumi new`, we should show any plugin install errors.
When installing a plugin, previous versions of Pulumi extracted the
plugin tarball to a temp directory and then renamed the temp directory
to the final plugin directory. This was done to prevent concurrent
installs: if a process fails to rename the temp dir because the final
dir already exists, it means another process already installed the
plugin. Unfortunately, on Windows the rename operation often fails due
to aggressive virus scanners opening files in the temp dir.
In order to provide reliable plugin installs on Windows, we now extract
the tarball directly into the final directory, and use file locks to
prevent concurrent installs from toppling over one another.
During install, a lock file is created in the plugin cache directory
with the same name as the plugin's final directory but suffixed with
`.lock`. The process that obtains the lock is responsible for extracting
the tarball. Before it does that, it cleans up any previous temp
directories of failed installs of previous versions of Pulumi. Then it
creates an empty `.partial` file next to the `.lock` file. The
`.partial` file indicates an installation is in-progress. The `.partial`
file is deleted when installation is complete, indicating the plugin was
successfully installed. If a failure occurs during installation, the
`.partial` file will remain indicating the plugin wasn't fully
installed. The next time the plugin is installed, the old installation
directory will be removed and replaced with a fresh install.
This is the same approach Go uses for installing modules in its
module cache.
Just what it says on the tin. This is implemented by changing the
`GetPackageConfig` method of `ConfigSource` to return a `PropertyMap`
and ensuring that any secret config is represented by a `Secret`.
Fixes: #5509
When changing from a passphrase provider to a cloud secrets provider,
the encryptionsalt is not required, so we should ensure this is removed
These changes add support for provider-side previews of create and
update operations, which allows resource providers to supply output
property values for resources that are being created or updated during a
preview.
If a plugin supports provider-side preview, its create/update methods
will be invoked during previews with the `preview` property set to true.
It is the responsibility of the provider to fill in any output
properties that are known before returning. It is a best practice for
providers to only fill in property values that are guaranteed to be
identical if the preview were instead an update (i.e. only those output
properties whose values can be conclusively determined without
actually performing the create/update operation should be populated).
Providers that support previews must accept unknown values in their
create and update methods.
If a plugin does not support provider-side preview, the inputs to a
create or update operation will be propagated to the outputs as they are
today.
Fixes#4992.
The logic for validating prompted values in 'new' wasn't quite right,
leading to the possibility of creating Pulumi.yaml files with blank
project names.
This manifests in various ways and I've hit it a number of times
over the past few months because of the way we handle project/stack
name conflicts in 'new' -- which itself is a bit annoying too:
https://github.com/pulumi/pulumi/blob/master/pkg/cmd/pulumi/new.go#L206-L207
Because we substitue a default value of "", and because the prompting
logic assumed default values are always valid, we would skip validation
and therefore accept a blank Pulumi.yaml file.
This generates an invalid project which causes errors elsewhere, such as
error: failed to load Pulumi project located at ".../Pulumi.yaml":
project is missing a 'name' attribute
I hit this all the time with our getting started guide because I've
gone through it so many times and have leftover stacks from prior
run-throughs. I wouldn't be surprised if a lot of people hit this.
The solution here validates all values, including the default.
Note also that we failed to validate the value used by 'new --yes'
which meant you could bypass all validation by passing --yes, leading
to similar outcomes.
I've added a couple new tests for these cases. There is a risk we
depend on illegal default values somewhere which will now be rejected,
but that would seem strange, and assuming the tests pass, I would
assume that's not true. Let me know if that's wrong.
Fixespulumi/pulumi#3255.
A recent change to output deserialization resulted in secrets being returned unwrapped. This change addresses the regression, ensuring any unwrapped secret values are rewrapped before being returned.
Instead of simplifying any module that ends with `/<name>`, only simplify
types where `<name>` matches the type name portion after camel-casing.
This continues to simplify tfbridge types like `aws:s3/bucket:Bucket`,
but would not simplify a type like `aws:s3:Bucket`.
We recently made a change to the Python codegen to emit `int` type annotations, instead of `float`, for properties that are typed as `schema.IntType`.
But the number values that come back from protobuf structs are always floats (like JSON), so we need to cast the values intended to be integers to `int`.
* Revise host mode.
The current implementation of host mode uses a `pulumi host` command and
an ad-hoc communication protocol between the engine and client to
connect a language host after the host has begun listening. The most
significant disadvantages of this approach are the communication
protocol (which currently requires the use of stdout), the host-specific
command, and the difficulty of accommodating the typical program-bound
lifetime for an update.
These changes reimplement host mode by adding engine support for
connecting to an existing language runtime service rather than launching
a plugin. This capability is provided via an engine-specific language
runtime, `client`, which accepts the address of the existing languge
runtime service as a runtime option. The CLI exposes this runtime via
the `--client` flag to the `up` and `preview` commands, which similarly
accepts the address of an existing language runtime service as an
argument. These changes also adjust the automation API to consume the
new host mode implementation.
We currently emit array types as `List[T]` for Python, but `List[T]` is invariant, which causes type checkers like mypy to produce errors when values like `["foo", "bar"]` are passed as args typed as `List[pulumi.Input[str]]` (since `Input[str]` is an alias for `Union[T, Awaitable[T], Output[T]]`. To address this, we should move to using [`Sequence[T]`](https://docs.python.org/3/library/typing.html#typing.Sequence) which is covariant, and does not have this problem.
We actually already do this for `Dict` vs. `Mapping`, emitting map types as `Mapping[str, T]` rather than `Dict[str, T]` because `Mapping[str, T]` is covariant for the value. This change makes us consistent for array types.
These are the SDK changes necessary to support `Sequence[T]`.
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
Fixes: #5134
This ensures that `pulumi history` has been deprecated in favor of
the new `pulumi stack history` command. The deprecated command will
be removed in v3.0.0 of Pulumi
Fixes: #5126
In the newServiceSecretsManager, we were loading and saving the project stack
without understanding if any changes had actually been made - e.g. changing the
stack to be a new secrets provider
This has now been guarded against, tests added to understand when it will
actually be saved and we no longer get unnecessary config sorting when interacting
with a default stack AND no longer get an empty config map in our config
file when we initiate a new stack with a default secrets provider
Fixes: #5104
This reverts a code change that was checking initially for the
SecretsProvider of the currentStack being an empty string. When it
was an empty string, we were checking the backend type and we were
setting a serviceSecretsManager. This wasn't correct, the logic
needed to check for an empty SecretsProvider AND an empty EncryptionSalt
The important part is that it needed to check for the EncryptionSalt
to make sure it wasn't a passphrase secrets manger
We make several calls to `os/user`, which uses CGO and means
cross-compilation is not possible. This replaces `os/user` with the
`luser` package, which is a drop-in replacement which does not use `CGO`