This change implements resource protection, as per pulumi/pulumi#689.
The overall idea is that a resource can be marked as "protect: true",
which will prevent deletion of that resource for any reason whatsoever
(straight deletion, replacement, etc). This is expressed in the
program. To "unprotect" a resource, one must perform an update setting
"protect: false", and then afterwards, they can delete the resource.
For example:
let res = new MyResource("precious", { .. }, { protect: true });
Afterwards, the resource will display in the CLI with a lock icon, and
any attempts to remove it will fail in the usual ways (in planning or,
worst case, during an actual update).
This was done by adding a new ResourceOptions bag parameter to the
base Resource types. This is unfortunately a breaking change, but now
is the right time to take this one. We had been adding new settings
one by one -- like parent and dependsOn -- and this new approach will
set us up to add any number of additional settings down the road,
without needing to worry about breaking anything ever again.
This is related to protected stacks, as described in
pulumi/pulumi-service#399. Most likely this will serve as a foundational
building block that enables the coarser grained policy management.
This change adds a `pulumi stack output` command. When passed no
arguments, it prints all stack output properties, in exactly the
same format as `pulumi stack` does (just without all the other stuff).
More importantly, if you pass a specific output property, a la
`pulumi stack output clusterARN`, just that property will be printed,
in a scriptable-friendly manner. This will help us automate wiring
multiple layers of stacks together during deployments.
This fixespulumi/pulumi#659.
As documented in issue #616, the inputs/defaults/outputs model we have
today has fundamental problems. The crux of the issue is that our
current design requires that defaults present in the old state of a
resource are applied to the new inputs for that resource.
Unfortunately, it is not possible for the engine to decide which
defaults remain applicable and which do not; only the provider has that
knowledge.
These changes take a more tactical approach to resolving this issue than
that originally proposed in #616 that avoids breaking compatibility with
existing checkpoints. Rather than treating the Pulumi inputs as the
provider input properties for a resource, these inputs are first
translated by `Check`. In order to accommodate provider defaults that
were chosen for the old resource but should not change for the new,
`Check` now takes the old provider inputs as well as the new Pulumi
inputs. Rather than the Pulumi inputs and provider defaults, the
provider inputs returned by `Check` are recorded in the checkpoint file.
Put simply, these changes remove defaults as a first-class concept
(except inasmuch as is required to retain the ability to read old
checkpoint files) and move the responsibilty for manging and
merging defaults into the provider that supplies them.
Fixes#616.
This change adds a new manifest section to the checkpoint files.
The existing time moves into it, and we add to it the version of
the Pulumi CLI that created it, along with the names, types, and
versions of all plugins used to generate the file. There is a
magic cookie that we also use during verification.
This is to help keep us sane when debugging problems "in the wild,"
and I'm sure we will add more to it over time (checksum, etc).
For example, after an up, you can now see this in `pulumi stack`:
```
Current stack is demo:
Last updated at 2017-12-01 13:48:49.815740523 -0800 PST
Pulumi version v0.8.3-79-g1ab99ad
Plugin pulumi-provider-aws [resource] version v0.8.3-22-g4363e77
Plugin pulumi-langhost-nodejs [language] version v0.8.3-79-g77bb6b6
Checkpoint file is /Users/joeduffy/dev/code/src/github.com/pulumi/pulumi-aws/.pulumi/stacks/webserver/demo.json
```
This addresses pulumi/pulumi#628.
This change switches from child lists to parent pointers, in the
way resource ancestries are represented. This cleans up a fair bit
of the old parenting logic, including all notion of ambient parent
scopes (and will notably address pulumi/pulumi#435).
This lets us show a more parent/child display in the output when
doing planning and updating. For instance, here is an update of
a lambda's text, which is logically part of a cloud timer:
* cloud:timer:Timer: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️timer:Timer::lm-cts-malta-job-CleanSnapshots]
* cloud:function:Function: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️function:Function::lm-cts-malta-job-CleanSnapshots]
* aws:serverless:Function: (same)
[urn=urn:pulumi:malta::lm-cloud::aws:serverless:Function::lm-cts-malta-job-CleanSnapshots]
~ aws:lambda/function:Function: (modify)
[id=lm-cts-malta-job-CleanSnapshots-fee4f3bf41280741]
[urn=urn:pulumi:malta::lm-cloud::aws:lambda/function:Function::lm-cts-malta-job-CleanSnapshots]
- code : archive(assets:2092f44) {
// etc etc etc
Note that we still get walls of text, but this will be actually
quite nice when combined with pulumi/pulumi#454.
I've also suppressed printing properties that didn't change during
updates when --detailed was not passed, and also suppressed empty
strings and zero-length arrays (since TF uses these as defaults in
many places and it just makes creation and deletion quite verbose).
Note that this is a far cry from everything we can possibly do
here as part of pulumi/pulumi#340 (and even pulumi/pulumi#417).
But it's a good start towards taming some of our output spew.
Adds support for top-level exports in the main script of a Pulumi Program to be captured as stack-level output properties.
This create a new `pulumi:pulumi:Stack` component as the root of the resource tree in all Pulumi programs. That resources has properties for each top-level export in the Node.js script.
Running `pulumi stack` will display the current value of these outputs.
We now encrypt secrets at rest based on a key derived from a user
suplied passphrase.
The system is designed in a way such that we should be able to have a
different decrypter (either using a local key or some remote service
in the Pulumi.com case in the future).
Care is taken to ensure that we do not leak decrypted secrets into the
"info" section of the checkpoint file (since we currently store the
config there).
In addtion, secrets are "pay for play", a passphrase is only needed
when dealing with a value that's encrypted. If secure config values
are not used, `pulumi` will never prompt you for a
passphrase. Otherwise, we only prompt if we know we are going to need
to decrypt the value. For example, `pulumi config <key>` only prompts
if `<key>` is encrypted and `pulumi deploy` and friends only prompt if
you are targeting a stack that has secure configuration assoicated
with it.
Secure values show up as unecrypted config values inside the language
hosts and providers.
The prior code was a little too aggressive in rejected undefined
properties, because it assumed any occurrence indicated a resource
that was unavailable due to planning. This is a by-produt of our
relatively recent decision to flow undefineds freely during planning.
The problem is, it's entirely legitimate to have undefined values
deep down in JavaScript structures, entirely unrelated to resources
whose property values are unknown due to planning.
This change flows undefined more freely. There really are no
negative consequences of doing so, and avoids hitting some overly
aggressive assertion failures in some important scenarios. Ideally
we would have a way to know statically whether something is a resource
property, and tighten up the assertions just to catch possible bugs
in the system, but because this is JavaScript, and all the assertions
are happening at runtime, we simply lack the necessary metadata to do so.
This improves a few things about assets:
* Compute and store hashes as input properties, so that changes on
disk are recognized and trigger updates (pulumi/pulumi#153).
* Issue explicit and prompt diagnostics when an asset is missing or
of an unexpected kind, rather than failing late (pulumi/pulumi#156).
* Permit raw directories to be passed as archives, in addition to
archive formats like tar, zip, etc. (pulumi/pulumi#240).
* Permit not only assets as elements of an archive's member list, but
also other archives themselves (pulumi/pulumi#280).
Instead of doing the logic to see if a type has YAML tags and then
dispatching based on that to use either the direct go-yaml marshaller
or the one that works in terms of JSON tags, let's just say that we
always add YAML tags as well, and use go-yaml directly.
During the course of a `pulumi update`, it is possible for a resource to
become slated for deletion. In the case that this deletion is part of a
replacement, another resource with the same URN as the to-be-deleted
resource will have been created earlier. If the `update` fails after the
replacement resource is created but before the original resource has been
deleted, the snapshot must capture that the original resource still exists
and should be deleted in a future update without losing track of the order
in which the deletion must occur relative to other deletes. Currently, we
are unable to track this information because the our checkpoints require
that no two resources have the same URN.
To fix this, these changes introduce to the update engine the notion of a
resource that is pending deletion and change checkpoint serialization to
use an array of resources rather than a map. The meaning of the former is
straightforward: a resource that is pending deletion should be deleted
during the next update.
This is a fairly major breaking change to our checkpoint files, as the
map of resources is no more. Happily, though, it makes our checkpoint
files a bit more "obvious" to any tooling that might want to grovel
or rewrite them.
Fixes#432, #387.
Previously we used the word "Environment" as the term for a deployment
target, but since then we've started to use the term Stack. Adopt this
across the CLI.
From a user's point of view, there are a few changes:
1. The `env` verb has been renamed to `stack`
2. The `-e` and `--env` options to commands which operate on an
environment now take `-s` or `--stack` instead.
3. Becase of (2), the commands that used `-s` to display a summary now
only support passing the full option name (`--summary`).
On the local file system, we still store checkpoint data in the `env`
sub-folder under `.pulumi` (so we can reuse existing checkpoint files
that were written to the old folder)
2017-10-16 13:04:20 -07:00
Renamed from pkg/resource/environment/deployment.go (Browse further)
