Adds a `--limit` flag to `pulumi stack history. This allows limiting to the last few entries rather than fetching the entirety of a stack's update history (which can be quite slow for stacks with lots of updates). Example: `pulumi stack history --limit 1` fetches the last history entry only.
`stack.up` and related operations in the Automation API have been updated to consume this change, drastically reducing overhead.
* Correctly rename stack files during a rename
This fixespulumi/pulumi#4463, by renaming a stack's configuration
file based on its stack-part, and ignoring the owner-part. Our
workspace system doesn't recognize configuration files with fully
qualified names. That, by the way, causes problems if we have
multiple stacks in different organizations that share a stack-part.
The fix here is simple: propagate the new StackReference from the
Rename operation and rely on the backend's normalization to a
simple name, and then use that the same way we are using a
StackReference to determine the path for the origin stack.
An alternative fix is to recognize fully qualified config files,
however, there's a fair bit of cleanup we will be doing as part of
https://github.com/pulumi/pulumi/issues/2522 and
https://github.com/pulumi/pulumi/issues/4605, so figured it is best
to make this work the way the system expects first, and revisit it
as part of those overall workstreams. I also suspect we may want to
consider changing the default behavior here as part of
https://github.com/pulumi/pulumi/issues/5731.
Tests TBD; need some advice on how best to test this since it
only happens with our HTTP state backend -- all integration tests
appear to use the local filestate backend at the moment.
* Add a changelog entry for bug fix
* Add some stack rename tests
* Fix a typo
* Address CR feedback
* Make some logic clearer
Use "parsedName" instead of "qn", add a comment explaining why
we're doing this, and also explicitly ignore the error rather
than implicitly doing so with _.
* Make `async:true` the default for `invoke` calls (#3750)
* Switch away from native grpc impl. (#3728)
* Remove usage of the 'deasync' library from @pulumi/pulumi. (#3752)
* Only retry as long as we get unavailable back. Anything else continues. (#3769)
* Handle all errors for now. (#3781)
* Do not assume --yes was present when using pulumi in non-interactive mode (#3793)
* Upgrade all paths for sdk and pkg to v2
* Backport C# invoke classes and other recent gen changes (#4288)
Adjust C# generation
* Replace IDeployment with a sealed class (#4318)
Replace IDeployment with a sealed class
* .NET: default to args subtype rather than Args.Empty (#4320)
* Adding system namespace for Dotnet code gen
This is required for using Obsolute attributes for deprecations
```
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'ObsoleteAttribute' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'Obsolete' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
```
* Fix the nullability of config type properties in C# codegen (#4379)
* Fix rename stack message when attempting to move organizations
* Include the URL to change stack ownership
Co-authored-by: Lee-Ming Zen <lee@pulumi.com>
Adds a new experimental `pulumi watch` CLI command which can be used for inner loop development on a Pulumi stack. This command is only available currently via `PULUMI_EXPERIMENTAL=true` while in active development.
The `watch` command does the following:
1. Watches the workspace (the tree rooted at the `Pulumi.yaml` file) for changes
2. Triggers an `update` to the stack whenever there is a change
3. Streams output containing summaries of key update events as well as logs from any resources under management into a combined CLI output
Part of https://github.com/pulumi/pulumi/issues/3448.
The PULUMI_EXPERIMENTAL flag also makes`query` and `policy` available.
This change adds support for lists and maps in config. We now allow
lists/maps (and nested structures) in `Pulumi.<stack>.yaml` (or
`Pulumi.<stack>.json`; yes, we currently support that).
For example:
```yaml
config:
proj:blah:
- a
- b
- c
proj:hello: world
proj:outer:
inner: value
proj:servers:
- port: 80
```
While such structures could be specified in the `.yaml` file manually,
we support setting values in maps/lists from the command line.
As always, you can specify single values with:
```shell
$ pulumi config set hello world
```
Which results in the following YAML:
```yaml
proj:hello world
```
And single value secrets via:
```shell
$ pulumi config set --secret token shhh
```
Which results in the following YAML:
```yaml
proj:token:
secure: v1:VZAhuroR69FkEPTk:isKafsoZVMWA9pQayGzbWNynww==
```
Values in a list can be set from the command line using the new
`--path` flag, which indicates the config key contains a path to a
property in a map or list:
```shell
$ pulumi config set --path names[0] a
$ pulumi config set --path names[1] b
$ pulumi config set --path names[2] c
```
Which results in:
```yaml
proj:names
- a
- b
- c
```
Values can be obtained similarly:
```shell
$ pulumi config get --path names[1]
b
```
Or setting values in a map:
```shell
$ pulumi config set --path outer.inner value
```
Which results in:
```yaml
proj:outer:
inner: value
```
Of course, setting values in nested structures is supported:
```shell
$ pulumi config set --path servers[0].port 80
```
Which results in:
```yaml
proj:servers:
- port: 80
```
If you want to include a period in the name of a property, it can be
specified as:
```
$ pulumi config set --path 'nested["foo.bar"]' baz
```
Which results in:
```yaml
proj:nested:
foo.bar: baz
```
Examples of valid paths:
- root
- root.nested
- 'root["nested"]'
- root.double.nest
- 'root["double"].nest'
- 'root["double"]["nest"]'
- root.array[0]
- root.array[100]
- root.array[0].nested
- root.array[0][1].nested
- root.nested.array[0].double[1]
- 'root["key with \"escaped\" quotes"]'
- 'root["key with a ."]'
- '["root key with \"escaped\" quotes"].nested'
- '["root key with a ."][100]'
Note: paths that contain quotes can be surrounded by single quotes.
When setting values with `--path`, if the value is `"false"` or
`"true"`, it will be saved as the boolean value, and if it is
convertible to an integer, it will be saved as an integer.
Secure values are supported in lists/maps as well:
```shell
$ pulumi config set --path --secret tokens[0] shh
```
Will result in:
```yaml
proj:tokens:
- secure: v1:wpZRCe36sFg1RxwG:WzPeQrCn4n+m4Ks8ps15MxvFXg==
```
Note: maps of length 1 with a key of “secure” and string value are
reserved for storing secret values. Attempting to create such a value
manually will result in an error:
```shell
$ pulumi config set --path parent.secure foo
error: "secure" key in maps of length 1 are reserved
```
**Accessing config values from the command line with JSON**
```shell
$ pulumi config --json
```
Will output:
```json
{
"proj:hello": {
"value": "world",
"secret": false,
"object": false
},
"proj:names": {
"value": "[\"a\",\"b\",\"c\"]",
"secret": false,
"object": true,
"objectValue": [
"a",
"b",
"c"
]
},
"proj:nested": {
"value": "{\"foo.bar\":\"baz\"}",
"secret": false,
"object": true,
"objectValue": {
"foo.bar": "baz"
}
},
"proj:outer": {
"value": "{\"inner\":\"value\"}",
"secret": false,
"object": true,
"objectValue": {
"inner": "value"
}
},
"proj:servers": {
"value": "[{\"port\":80}]",
"secret": false,
"object": true,
"objectValue": [
{
"port": 80
}
]
},
"proj:token": {
"secret": true,
"object": false
},
"proj:tokens": {
"secret": true,
"object": true
}
}
```
If the value is a map or list, `"object"` will be `true`. `"value"` will
contain the object as serialized JSON and a new `"objectValue"` property
will be available containing the value of the object.
If the object contains any secret values, `"secret"` will be `true`, and
just like with scalar values, the value will not be outputted unless
`--show-secrets` is specified.
**Accessing config values from Pulumi programs**
Map/list values are available to Pulumi programs as serialized JSON, so
the existing
`getObject`/`requireObject`/`getSecretObject`/`requireSecretObject`
functions can be used to retrieve such values, e.g.:
```typescript
import * as pulumi from "@pulumi/pulumi";
interface Server {
port: number;
}
const config = new pulumi.Config();
const names = config.requireObject<string[]>("names");
for (const n of names) {
console.log(n);
}
const servers = config.requireObject<Server[]>("servers");
for (const s of servers) {
console.log(s.port);
}
```
