Because of our Proxy types, every output will return something when
you call `.isSecret` on it. However, if you call it on an output from
a version of `@pulumi/pulumi` which did not support secrets, the thing
you will get back is not undefined but rather an `Output` which wraps
undefined.
Because of this, care must be taken when reading this property and so
a small helper is introduced and used in places we care about.
Since we don't support nesting secrets (as they are modeled as
Outputs), as we deserialize, we push the secretness up to top level,
where we will correctly use it to mark the output as secret.
This fixes an issue where if you created a StackReference resource,
with a mix of secret and non secret properties, you would see the
"wire form" of the secrets as values on the `outputs` map of the
StackReference resource.
In our system, we model secrets as outputs with an additional bit of
metadata that says they are secret. For Read and Register resource
calls, our RPC interface says if the client side of the interface can
handle secrets being returned (i.e. the language SDK knows how to
sniff for the special signiture and resolve the output with the
special bit set).
For Invoke, we have no such model. Instead, we return a `Promise<T>`
where T's shape has just regular property fields. There's no place
for us to tack the secretness onto, since there are no Outputs.
So, for now, don't even return secret values back across the invoke
channel. We can still take them as arguments (which is good) but we
can't even return secrets as part of invoke calls. This is not ideal,
but given the way we model these sources, there's no way around
this. Fortunately, the result of these invoke calls are not stored in
the checkpoint and since the type is not Output<T> it will be clear
that the underlying value is just present in plaintext. A user that
wants to pass the result of an invoke into a resource can turn an
existing property into a secret via `pulumi.secret`.
When serializing values, if the other end of the resource monitor
interface does not support secrets (e.g. it is an older CLI), don't
pass secrets to it.
`Output<T>` now tracks if an output represents secret data or
not. When secret, it is marshalled as a secret value and we signal to
the resource monitor that it is safe to return secret values to us.
The `pulumi` module exports a new functiion, `secret<T>` which works
in the same was a `output<T>` except that it marks the underlying
output as a secret.
This secret bit flows as you would expect across `all`'s and
`apply`'s.
Note that in process memory, the raw value is still present, when you
run an `apply` for a secret output, you are able to see the raw
value. In addition, if you capture a secret output with a lambda, the
raw value will be present in the captured source text.
We changed the `pulumi update` command to be `pulumi up` a while back
(`update` is an alias of `up`). This change just makes it so we refer to
the actual command, `pulumi up`, instead of the older `pulumi update`.
In previous commits, we have changed the language plugin protocol to
allow the host to communicate that the plugin is meant to boot in "query
mode." In nodejs, this involves not doing things like registering the
default stack resource. This commit will implement this functionality.
* NodeJS: allow callers to override provider version
* Python: allow callers to override provider version
* NodeJS: add version for invoke
* Python: add version to invoke
* NodeJS: add tests for ReadResource
* Post-merge cleanup
* update doc comments
Fixes#2277.
Adds a new ignoreChanges resource option that allows specifying a list of property names whose values will be ignored during updates. The property values will be used for Create, but will be ignored for purposes of updates, and as a result also cannot trigger replacements.
This is a feature of the Pulumi engine, not of the resource providers, so no new logic is needed in providers to support this feature. Instead, the engine simply replaces the values of input properties in the goal state with old inputs for properties marked as ignoreChanges.
Currently, only top level properties may be specified in ignoreChanges. In the future, this could be extended to support paths to nested properties (including into array elements) with a JSONPath/JMESPath syntax.
* Enable unit testing for Pulumi programs
This change enables rudimentary unit testing of your Pulumi programs, by introducing a `PULUMI_TEST_MODE` envvar that, when set, allows programs to run without a CLI. That includes
* Just being able to import your Pulumi modules, and test ordinary functions -- which otherwise would have often accidentally triggered the "Not Running in a CLI" error message
* Being able to verify a subset of resource properties and shapes, with the caveat that outputs are not included, due to the fact that this is a perpetual "dry run" without any engine operations occurring
In principle, this also means you can attach a debugger and step through your code.
* Finish the unit testing features
This change
1) Incorporates CR feedback, namely requiring that test mode be
explicitly enabled for any of this to work.
2) Implements Python support for the same capabilities.
3) Includes tests for both JavaScript and Python SDKs.
* Add a note on unit testing to the CHANGELOG
* Use Node 8 friendly assert API
* Embellish the CHANGELOG entry a bit
This update includes several changes to core `@pulumi/pulumi` constructs that will not play nicely
in side-by-side applications that pull in prior versions of this package. As such, we are rev'ing
the minor version of the package from 0.16 to 0.17. Recent version of `pulumi` will now detect,
and warn, if different versions of `@pulumi/pulumi` are loaded into the same application. If you
encounter this warning, it is recommended you move to versions of the `@pulumi/...` packages that
are compatible. i.e. keep everything on 0.16.x until you are ready to move everything to 0.17.x.
### Improvements
- `Output<T>` now 'lifts' property members from the value it wraps, simplifying common coding patterns. Note: this wrapping only happens for POJO values, not `Output<Resource>`s.
- Depending on a **Component** Resource will now depend on all other Resources parented by that
Resource. This will help out the programming model for Component Resources as your consumers can
just depend on a Component and have that automatically depend on all the child Resources created
by that Component. Note: this does not apply to a **Custom** resource. Depending on a
CustomResource will still only wait on that single resource being created, not any other Resources
that consider that CustomResource to be a parent.
* Revert "Make toString and toJSON internal (#2489)"
This reverts commit 7579b84f73.
* Revert "Update error message to point at docs. (#2488)"
This reverts commit 9156c26a2e.
* Revert "Throw on Output.toString and toJSON (#2486)"
This reverts commit c33b4505c0.
These changes add a new flag to the various `ResourceOptions` types that
indicates that a resource should be deleted before it is replaced, even
if the provider does not require this behavior. The usual
delete-before-replace cascade semantics apply.
Fixes#1620.
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
This changes the input type for dependsOn from simply
`Resource[] | Resource` to `Input<Input<Resource>[]> | Input<Resource>`.
This permits `Output<Resource>`s, etc in addition to
`Promise<Resource>`s. The logic for dynamically unpicking the right
types and recursing through the data structures isn't straightforward,
but I've written a test for all of the interesting permutations.
This fixespulumi/pulumi#991.
* Make v8 primitives async as there is no way to avoid async in node11.
* Simplify API.
* Move processing of well-known globals into the v8 layer.
We'll need this so that we can map from RemoteObjectIds back to these well known values.
* Remove unnecesssary check.
* Cleanup comments and extract helper.
* Introduce helper bridge method for the simple case of making an entry for a string.
* Make functions async. They'll need to be async once we move to the Inspector api.
* Make functions async. They'll need to be async once we move to the Inspector api.
* Make functions async. They'll need to be async once we move to the Inspector api.
* Move property access behind helpers so they can move to the Inspector API in the future.
* Only call function when we know we have a Function. Remove redundant null check.
* Properly serialize certain special JavaScript number values that JSON serialization cannot handle.
* Only marshall across the 'source' and 'flags' for a RegExp when serializing.
* Add a simple test to validate a regex without flags.
* Extract functionality into helper method.
* Add test with complex output scenarios.
* Output serialization needs to avoid recursively trying to serialize a serialized value.
* Introduce indirection for introspecting properties of an object.
* Use our own introspection API for examining an Array.
* Hide direct property access through API indirection.
* Produce values like the v8 Inspector does.
* Compute the module map asynchronously. Will need that when mapping mirrors instead.
* Cleanup a little code in closure creation.
* Get serialization working on Node11 (except function locations).
* Run tests in the same order on <v11 and >=v11
* Make tests run on multiple versions of node.
* Rename file to make PR simpler to review.
* Cleanup.
* Be more careful with global state.
* Remove commented line.
* Only allow getting a session when on Node11 or above.
* Promisify methods.
This change adds some new constructors for output properties:
1) We alias `Output.create` to `output`, more like Promise's various
construction methods. This reads better and is more discoverable.
2) A new `Output.createMap` function will accept an array of inputs,
along with a selector function for key/value pairs, and produces
an output map with said keys and values inside of it.
3) A new `Output.createGroupByMap` functon will similarly accept an
array of inputs and a key/value selector, however it creates an
output map with said keys, but where values are arrays of values,
and all duplicate keys will lead to appending to said arrays.
Tests to come in a subsequent checkin.
* Fail closure serialization in Node 11
Node 11 changed many of the intrinsics that we depend upon for closure
serialization, so until we fix the underlying issues this commit lazily
fails if a closure is serialized when running on Node 11.
* CR feedback
Some providers (namely Kubernetes) require unbounded parallelism in
order to function correctly. This commit enables the engine to operate
in a mode with unbounded parallelism and switches to that mode by
default.
Instead of looping forever, due to some recent improvements in engine
error handling it's sufficient for a language host to exit cleanly with
a zero exit code when the resource monitor is shutting down.
* Revert RunError behavior. Introduce new ResourceError for errors associated with a resource.
* Fix docs.
* Use resource error.
* Use ResourceError in more places.
* Use ResourceError in a few more places.
* Throw a resource error.
* Make required.
* Revert this.
* Lint.
* Only report errors once.
* Better comment.
* Protobuf changes
* Move management of root resource state to engine
This commit fixes a persistent side-by-side issue in the NodeJS SDK by
moving the management of root resource state to the engine. Doing so
adds two new endpoints to the Engine gRPC service: 1) GetRootResource
and 2) SetRootResource, which get and set the root resource
respectively.
* Rebase against master, regenerate proto
* Validate type tokens before using them
When registering or reading a resource, we take the type token given to
us from the language host and assume that it's valid, which resulted in
assertion failures in various places in the engine. This commit
validates the format of type tokens given to us from the language host
and issues an appropriate error if it's not valid.
Along the way, this commit also improves the way that fatal exceptions
are rendered in the Node language host.
* Pre-allocate an exception for ReadResource
* Fix integration test
* CR Feedback
This commit is a lower-impact change that fixes the bugs associated with
invalid types on component resources and only checks that a type is
valid on custom resources.
* CR Take 2: Fix up IsProviderType instead of fixing call sites
* Please gometalinter
Node calls 'exit' event callbacks when a process is preparing to exit,
via process.exit or otherwise, but it does not execute the next callback
in the chain if a callback calls process.exit.
* Use Promise.resolve.
* Use `Inputs | Promise<Inputs> | Output<Inputs>` rather than
`Input<Inputs>`, which looks supremely bizarre.
* Update ComponentResource.registerOutputs also.
This change partly addresses pulumi/pulumi#1611, by permitting you
to export a promise at the top-level, and have it be recognized as
a stack output. In other words, you can now say things like
async function main() {
...
return {
a: "x",
...,
z: 42,
};
}
module.exports = main();
and your Pulumi program will record distinct outputs as you'd hope:
---outputs:---
a: "x"
...
z: 42
This is arguably just a bug in the way we implemented stack outputs.
The remainder of the requests in #1611 will remain open for future
design and discussion, as they have more subtle ramifications.
If a resource's options bag does not specify `protect` or `provider`,
pull a default value from the resource's parent.
In order to allow a parent resource to specify providers for multiple
resource types, component resources now accept an optional map from
package name to provider instance. When a custom resource needs a
default provider from its parent, it checks its parent provider bag for
an entry under its package. If a component resource does not have a
provider bag, its pulls a default from its parent.
These changes also add a `parent` field to `InvokeOptions` s.t. calls to
invoke can use the same behavior as resource creation w.r.t. providers.
Fixes#1735, #1736.
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
The pulumi runtime used to lazily load and parse both config and
settings data set by the language host. The initial reason for this
design was that we wanted the runtime to be usable in a normal node
environment, but we have moved away from supporting that.
In addition, while we claimed we loaded these value "lazily", we
actually forced their loading quite eagerly when we started
up. However, when capturing config (or settings, as we now do), we
would capture all the logic about loading these values from the
environment.
Even worse, in the case where you had two copies of @pulumi/pulumi
loaded, it would be possible to capture a config object which was not
initialized and then at runtime the initialization logic would try to
read PULUMI_CONFIG from the process environment and fail.
So we adopt a new model where configuration and settings are parsed as
we load their containing modules. In addition, to support SxS
scinerios, we continue to use `process.env` as a way to control both
configuration and settings. This means that `run.ts` must now ensure
that these values are present in the environment before either the
config or runtime modules have been loaded.
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
* Revert "Parallelize much more of resource creation in the JS language provider SDK (#1618)"
This reverts commit 4edd244a26.
* Revert "Process our async-work-queue in parallel. (#1619)"
This reverts commit b8c1cb9574.
Closure serialization now keeps track of the `require`d packages it sees in the function bodies that are serialized during a call to `serializeFunction`.
Also, replaces `serializeFunctionAsync` with `serializeFunction` which accepts richer parameters and return type, deprecating the former API (but leaving it available for now to avoid a breaking change).
Before the changes in #1414, all output properties were guaranteed to
have values after deserialization. After #1414, any properties with no
value were no longer resolved, which was treated as an error. These
changes resolve all missing proprties to `undefined`. If a property is
missing during an update, its `undefined` value is marked as known.
These changes add support for distinguishing an output property with
an unknown value from an output property with a known value that is
undefined.
In a broad sense, the Pulumi property type system is just JSON with the
addition of unknown values. Notably absent, however, are undefined
values. As it stands, our marshalers between JavaScript and Pulumi
property values treat all undefined JavaScript values as unknown Pulumi
values. Unfortunately, this conflates two very different concepts:
unknown Pulumi values are intended to represent values of output
properties that are unknown at time of preview, _not_ values that are
known but undefined. This results in difficulty reasoning about when
transforms are run on output properties as well as confusing output in
the `diff` view of Pulumi preview (user-specifed undefined values are
rendered as unknown values).
As it turns out, we already have a way to decide whether or not an
Output value is known or not: Output.performApply. These changes rename
this property to `isKnown`, clarify its meaning, and take advantage of
the result to decide whether or not an Output value should marshal as
an unknown Pulumi value.
This also allowed these changes to improve the serialization of
undefined object keys and array elements s.t. we better match JavaScript
to JSON serialization behavior (undefined object keys are omitted;
undefined array elements are marshaled as `null`).
Fixes https://github.com/pulumi/pulumi-cloud/issues/483.
