### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
A critical part of the partial update protocol is to return a structured
error when a resource is successfully created, but fails to initialize.
This structured error contains the properties of the
partially-initialized resource, and instructs the engine to halt.
Most languages implement this by attaching "details" to the error, i.e.,
an arbitrary proto message attached to the error. The JavaScript
implementation is not mature enough to include all the facilities
required to use this, so here we must add a `Status` message, which
protobuf requires as part of its structure for returning details.
The RPC provider interface needs a way to convey back to the engine
that a resource being read no longer exists. To do this, we'll return
the ID property that was read back. If it is empty, it means the
resource is gone. If it is non-empty, we expect it to match the input.
This change wires up the new Read RPC method in such a manner that
Pulumi programs can invoke it. This is technically not required for
refreshing state programmatically (as in pulumi/pulumi#1081), however
it's a feature we had eons ago and have wanted since (see
pulumi/pulumi#83), and will allow us to write code like
let vm = aws.ec2.Instance.get("my-vm", "i-07043cd97bd2c9cfc");
// use any property from here on out ...
The way this works is simply by bridging the Pulumi program via its
existing RPC connection to the engine, much like Invoke and
RegisterResource RPC requests already do, and then invoking the proper
resource provider in order to read the state. Note that some resources
cannot be uniquely identified by their ID alone, and so an extra
resource state bag may be provided with just those properties required.
This came almost for free (okay, not exactly) and will come in handy as
we start gaining experience with reading live state from resources.
This commit changes two things about our resource model:
* Stop performing Pulumi Engine-side diffing of resource state.
Instead, we defer to the resource plugins themselves to determine
whether a change was made and, if so, the extent of it. This
manifests as a simple change to the Diff function; it is done in
a backwards compatible way so that we continue with legacy diffing
for existing resource provider plugins.
* Add a Read RPC method for resource providers. It simply takes a
resource's ID and URN, plus an optional bag of further qualifying
state, and it returns the current property state as read back from
the actual live environment. Note that the optional bag of state
must at least include enough additional properties for resources
wherein the ID is insufficient for the provider to perform a lookup.
It may, however, include the full bag of prior state, for instance
in the case of a refresh operation.
This is part of pulumi/pulumi#1108.
* Improve the error message arising from missing required configs for
resource providers
If the resource provider that we are speaking to is new enough, it will send
across a list of keys and their descriptions alongside an error
indicating that the provider we are configuring is missing required
config. This commit packages up the list of missing keys into an error
that can be presented nicely to the user.
* Code review feedback: renaming simplification and correcting errors in comments
* Send structured errors across RPC boundaries
This brings us closer to gRPC best practices where we send structured
errors with error codes across RPC endpoints. The new "rpcerrors"
package can wrap errors from RPC endpoints, so RPC servers can attach
some additional context as to why a request failed.
* Code review feedback:
1. Rename rpcerrors -> rpcerror, better package name
2. Rename RPCError -> Error, RPCErrorCause -> ErrorCause, names
suggested by gometalinter to improve their package-qualified names
3. Fix import organization in rpcerror.go
This change includes a lot more functionality. Enough to actually
run the webserver-py example through previews, updates, and destroys!
* Actually wire up the gRPC connections to the engine/monitor.
* Move the Node.js and Python generated Protobuf/gRPC files underneath
the actual SDK directories to simplify this generally. No more
copying during `make` and, in fact, this was required to give a smoother
experience with good packages/modules for the Python's SDK development.
* Build the Python egg during `make build`.
* Add support for program stacks. Just like with the Node.js runtime,
we will auto-parent any resources without explicit parents to a single
top-level resource component.
* Add support for component resource output properties.
* Add get_project() and get_stack() functions for retrieving the current
project and stack names.
* Properly use UNKNOWN sentinels.
* Add a set_outputs() function on Resource. This is defined by the
code-generator and allows custom logic for output property setting.
This is cleaner than the way we do this in Node.js, and gives us a
way to ensure that output properties are "real" properties, complete
with member documentation. This also gives us a hook to perform
name demangling, which the code-generator typically controls anyway.
* Add package dependencies to setuptools.py and requirements.txt.
