The diff rendering logic tests whether the DetailedDiff is nil to determine whether to use it for rendering or defer to older older supported approaches to computing diffs.
The new logic added in https://github.com/pulumi/pulumi/pull/7226 could lead to replacing a nil DetailedDiff with an empty DetailedDiff, whcih would make the rendering logic believe that a DetailedDiff was present but empty, instead of missing entirely.
This change ensures that we maintain nil-ness of the DetailedDiff when we transform it for handling of replaceOnChanges.
Also adds tests for this and other cases on applyReplaceOnChanges.
Fixes#7486.
Query mode does not fill out the Target field of EvalRunInfo before
booting its resource monitor. These changes fix a recent update to query
mode that attempts to dereference the nil Target.
Note that the missing target is by design, and other portions of the
query infrastructure have identical code to compensate.
Adds a new resource option to force replacement when certain properties report changes, even if the resource provider itself does not require a replacement.
Fixes#6753.
Co-authored-by: Levi Blackstone <levi@pulumi.com>
Adds initial support for resource methods (via a new `Call` gRPC method similar to `Invoke`), with support for authoring methods from Node.js, and calling methods from Python.
These changes support arbitrary combinations of input + plain types
within a schema. Handling plain types at the property level was not
sufficient to support such combinations. Reifying these types
required updating quite a bit of code. This is likely to have caused
some temporary complications, but should eventually lead to
substantial simplification in the SDK and program code generators.
With the new design, input and optional types are explicit in the schema
type system. Optionals will only appear at the outermost level of a type
(i.e. Input<Optional<>>, Array<Optional<>>, etc. will not occur). In
addition to explicit input types, each object type now has a "plain"
shape and an "input" shape. The former uses only plain types; the latter
uses input shapes wherever a plain type is not specified. Plain types
are indicated in the schema by setting the "plain" property of a type spec
to true.
This command converts an appdash trace into a pprof file for use with
`go tool pprof`. Spans are converted into stacks by sampling each root
span at a given rate and recording the stack of subspans at each sample.
These changes also replace the conditional addition of experimental and
debug commands with conditional visibility. Experimental and debug
commands will always be available, but will be hidden unless the
appropraite environment variables are set.
Co-authored-by: Levi Blackstone <levi@pulumi.com>
Update the RegisterResource method in the ResourceMonitor
to unmarshal the providers field added in d297db3 and then resolve
any provider references so that they can be set on the Construct call.
* Fix resource-ref-as-ID marshaling. (#6125)
This reapplies 2f0dba23ab.
* Fix malformed resource value bug
PR #6125 introduced a bug by marshaling resource
ids as PropertyValues, but not handling that case on
the unmarshaling side. The previous code assumed
that the id was a simple string value. This bug prevents
any stack update operations (preview, update, destroy,
refresh). Since this change was already
released, we must now handle both cases in the
unmarshaling code.
* Add resource ref unit tests for the Go SDK. (#6142)
This reapplies 3d505912b8.
Co-authored-by: Pat Gavlin <pat@pulumi.com>
When marshaling a resource reference as its ID (i.e. when
opts.KeepResources is false, as it will be in the case of downlevel SDKs
and resource providers), we must take care to marshal/unmarshal an empty
ID as the unknown property value.
This includes the following changes to the resource ref APIs:
- Bifurcate resource reference creation into two methods: one for
creating references to custom resources and one for creating
references to component resources.
- Store the ID in a resource reference as a PropertyValue s.t. it can be
computed.
- Add a helper method for retrieving the ID as a string + an indicator of
whether or not the reference has an ID.
Fixes#5939.
Although raw provider resources accept an input that allows a user to
specifiy a provider version to use, this input is not reflected in
current SDK code generation. Furthermore, we already have a method to
specify the provider version that should be used for a resource: the
"version" resource option. These changes update the code that handles
provider resource registrations to autmoatically populate the version
input from the "version" resource option if the option is present.
Fixes https://github.com/pulumi/pulumi-azure/issues/803.
These changes are a combination of three commits, each of which
contributes to the testing and/or fixing of a problem with marshaling
unknowns in `plugin.provider.Update` when `preview` is true.
## deploytest: add support for gRPC adapters.
These changes add support for communicating with providers using the
gRPC adapters to the deploytest pacakage. This makes it easier to test
the gRPC adapters across typical lifecycle patterns.
Supporting these changes are two additions to the `resource/plugin`
package:
1. A type that bridges between the `plugin.Provider` interface and the
`pulumirpc.ResourceProviderServer`
2. A function to create a `plugin.Provider` given a
`pulumirpc.ResourceProviderClient`
The deploytest package uses these to wrap an in-process
`plugin.Provider` in a gRPC interface and connect to it without using
the default plugin host, respectively.
## pulumi_test: test provider preview over gRPC.
Add a test that runs the provider preview lifecycle, but using a
provider that communicates over gRPC.
## gRPC bridge: fix unknowns in `Update` previews
Set the `KeepUnknowns` and `RejectUnknowns` bits in the `MarshalOptions`
used when unmarshaling update results to preserve unknowns during a
preview and reject them otherwise.
These changes also set the `RejectUnknowns` bit in the `MarshalOptions`
used by `Create` if `preview` is false, and fix a bug in the array
unmarshaler that could cause out-of-bounds accesses.
Fixes https://github.com/pulumi/pulumi/issues/6004.
State tracking for goals was implemented using a raw map,
but this was not safe for concurrent read/write access from
multiple goroutines. Switched to using a sync.Map, which
is threadsafe.
The step generator was incorrectly tracking goal states for
old resources, which could lead to a panic if the resource
was removed in the update. This fix only generates goal
states for resources that exist in the updated program.
Now that resources are serialized as refs, ComponentResources
may try to unmarshal local resource refs before they are
initialized during the RegisterResource step.
This change avoids that issue by skipping Output marshaling
for local ComponentResources during the RegisterResource step.
These Outputs will be handled instead during the
RegisterResourceOutputs step.
Co-authored-by: Pat Gavlin <pat@pulumi.com>
The step generator applies `ignoreChanges` pre-processing for all
resources by copying old input values to the new goal for any properties
mentioned in the `ignoreChanges` list. However, this pre-processing
depends on the existence of prior inputs, which by definition does not
exist for a resource being imported prior to the issuance of the
`ImportStep`. These changes add this processing to the implementation of
`ImportStep`, using the inputs read from the provider as the prior
inputs.
- Add component ref coverage to the existing test
- Add coverage for a downlevel SDK communicating with an engine that
supports resource refs
- Add coverage for a downlevel engine communicating with an SDK that
supports resource refs
As part of improving coverage, these changes add a knob to explicitly
disable resource refs in the engine without the use of the environment
variable. The environment variable is now only read by the CLI, and has
been restored to its prior polarity (i.e. `PULUMI_ENABLE_RESOURCE_REFERENCES`).
Disable resource ref support until https://github.com/pulumi/pulumi-kubernetes/issues/1405
is fixed. This bug currently affects Python users with recent versions of the pulumi SDK
who are using the pulumi-kubernetes provider.
* Enable resource reference feature by default
Unless the PULUMI_DISABLE_RESOURCE_REFERENCES flag
is explicitly set to a truthy value, the resource reference feature is now
enabled by default.
* Set AcceptResources in the language SDKs
This can be disabled by setting the `PULUMI_DISABLE_RESOURCE_REFERENCES` environment variable to a truthy value.
Co-authored-by: Justin Van Patten <jvp@justinvp.com>
Record new resources after their operations have been run rather than
before in order to ensure that all state is available and appropriately
marked as secret.
Fixes#5803.
To de-risk the Pulumi v2.15.0 release, temporarily revert 679d40950f. Use of resource references will require `PULUMI_EXPERIMENTAL_RESOURCE_REFERENCES=1` to be set until the feature has been enabled by default.
- Differentiate between resource references that have no ID (i.e. because
the referenced resource is not a CustomResource) and resource references
that have IDs that are not known. This is necessary for proper
backwards-compatible serialization of resource references.
- Fix the key that stores a resource reference's package version in the
.NET, NodeJS, and Python SDKs.
- Ensure that the resource monitor's marshalling/unmarshalling of inputs
and outputs to/from calls to `Construct` retain resource references as
appropriate.
- Fix serialization behavior for resources -> resource references in the
Go SDK: if a resource's ID is unknown, it should still be serialized
as a resource reference, albeit a reference with an unknown ID.
Just what it says on the tin.
The SDK code generator will be updated to use the new `urn`
resource option inside of each module's implementation of
`ResourceModule.construct`.
Part of #2430.
Co-authored-by: Justin Van Patten <jvp@justinvp.com>
Rename deploy.Plan to deploy.Deployment.
There are two benefits to this change:
1. The name "Deployment" more accurately reflects the behavior of the
type, which is responsible for previewing or executing a deployment.
2. Renaming this type frees up the name "Plan" for use when addressing
#2318.
Just what it says on the tin. This is implemented by changing the
`GetPackageConfig` method of `ConfigSource` to return a `PropertyMap`
and ensuring that any secret config is represented by a `Secret`.
The langauge SDKs will use this function to fetch the state required to
deserialize a resource reference. SDK support will be added as a follow-up
change.
Contributes to #2430.
Resources are serialized as their URN, ID, and package version. Each
Pulumi package is expected to register itself with the SDK. The package
will be invoked to construct appropriate instances of rehydrated
resources. Packages are distinguished by their name and their version.
This is the foundation of cross-process resources.
Related to #2430.
Co-authored-by: Mikhail Shilkov <github@mikhail.io>
Co-authored-by: Luke Hoban <luke@pulumi.com>
Co-authored-by: Levi Blackstone <levi@pulumi.com>
These changes add support for provider-side previews of create and
update operations, which allows resource providers to supply output
property values for resources that are being created or updated during a
preview.
If a plugin supports provider-side preview, its create/update methods
will be invoked during previews with the `preview` property set to true.
It is the responsibility of the provider to fill in any output
properties that are known before returning. It is a best practice for
providers to only fill in property values that are guaranteed to be
identical if the preview were instead an update (i.e. only those output
properties whose values can be conclusively determined without
actually performing the create/update operation should be populated).
Providers that support previews must accept unknown values in their
create and update methods.
If a plugin does not support provider-side preview, the inputs to a
create or update operation will be propagated to the outputs as they are
today.
Fixes#4992.
* Revise host mode.
The current implementation of host mode uses a `pulumi host` command and
an ad-hoc communication protocol between the engine and client to
connect a language host after the host has begun listening. The most
significant disadvantages of this approach are the communication
protocol (which currently requires the use of stdout), the host-specific
command, and the difficulty of accommodating the typical program-bound
lifetime for an update.
These changes reimplement host mode by adding engine support for
connecting to an existing language runtime service rather than launching
a plugin. This capability is provided via an engine-specific language
runtime, `client`, which accepts the address of the existing languge
runtime service as a runtime option. The CLI exposes this runtime via
the `--client` flag to the `up` and `preview` commands, which similarly
accepts the address of an existing language runtime service as an
argument. These changes also adjust the automation API to consume the
new host mode implementation.
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.