* Make `async:true` the default for `invoke` calls (#3750)
* Switch away from native grpc impl. (#3728)
* Remove usage of the 'deasync' library from @pulumi/pulumi. (#3752)
* Only retry as long as we get unavailable back. Anything else continues. (#3769)
* Handle all errors for now. (#3781)
* Do not assume --yes was present when using pulumi in non-interactive mode (#3793)
* Upgrade all paths for sdk and pkg to v2
* Backport C# invoke classes and other recent gen changes (#4288)
Adjust C# generation
* Replace IDeployment with a sealed class (#4318)
Replace IDeployment with a sealed class
* .NET: default to args subtype rather than Args.Empty (#4320)
* Adding system namespace for Dotnet code gen
This is required for using Obsolute attributes for deprecations
```
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'ObsoleteAttribute' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'Obsolete' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
```
* Fix the nullability of config type properties in C# codegen (#4379)
Also:
- Cleaned up existing tags so they're consistently at the bottom of doc comments where they should be
- Cleaned up some unused imports while I was taking a pass over the files
- Marked one function `@deprecated` that should be deprecated
A user who calls `StreamInvoke` probably expects the `AsyncIterable`
that is returned to gracefully terminate. This is currently not the
case.
Where does something like this go wrong? A better question might be
where any of this went right, because several days later, after
wandering into civilization from the great Wilderness of Bugs, I must
confess that I've forgotten if any of it had.
`AsyncIterable` is a pull-based API. `for await (...)` will continuously
call `next` ("pull") on the underlying `AsyncIterator` until the
iterable is exhausted. But, gRPC's streaming-return API is _push_ based.
That is to say, when a streaming RPC is called, data is provided by
callback on the stream object, like:
call.on("data", (thing: any) => {... do thing ...});
Our goal in `StreamInvoke` is to convert the push-based gRPC routines
into the pull-based `AsyncIterable` retrun type. You may remember your
CS theory this is one of those annoying "fundamental mismatches" in
abstraction. So we're off to a good start.
Until this point, we've depended on a library,
`callback-to-async-iterator` to handle the details of being this bridge.
Our trusting nature and innocent charm has mislead us. This library is
not worthy of our trust. Instead of doing what we'd like it to do, it
returns (in our case) an `AsyncIterable` that will never complete.
Yes,, this `AsyncIterable` will patiently wait for eternity, which
honestly is kind of poetic when you sit down in a nice bath and think
about that fun time you considered eating your computer instead of
finishing this idiotic bug.
Indeed, this is the sort of bug that you wonder where it even comes
from. Our query libraries? Why aren't these `finally` blocks executing?
Is our language host terminating early? Is gRPC angry at me, and just
passive-aggrssively not servicing some of my requests? Oh god I've been
up for 48 hours, why is that wallpaper starting to move? And by the way,
a fun interlude to take in an otherwise very productive week is to try
to understand the gRPC streaming node client, which is code-gen'd, but
which also takes the liberty of generating itself at runtime, so that
gRPC is code-gen'ing a code-gen routine, which makes the whole thing
un-introspectable, un-debuggable, and un-knowable. That's fine, I didn't
need to understand any of this anyway, thanks friends.
But we've come out the other side knowing that the weak link in this
very sorry chain of incredibly weak links, is this dependency.
This commit removes this dependency for a better monster: the one we
know.
It is at this time that I'd like to announce that I am quitting my job
at Pulumi. I thank you all for the good times, but mostly, for taking
this code over for me.
Change is 3.6.2 of typescript have caused their code generation to no
longer emit a call to `this` inside an arrow function, so this test is
no longer causing an error to be thrown.
For now, just accept the baseline, but I'll file an issue so we can
actually get a real failing test here.
- Ensure that type assertions are guarded, and that incorrectly-typed
properties return errors rather than panicking
- Expand the asset/archive tests in the Node SDK to ensure that eventual
archives and assets serialize and deserialize correctly
Fixes#2836.
Fixes#3016.
A resource can be imported by setting the `import` property in the
resource options bag when instantiating a resource. In order to
successfully import a resource, its desired configuration (i.e. its
inputs) must not differ from its actual configuration (i.e. its state)
as calculated by the resource's provider.
There are a few interesting state transitions hiding here when importing
a resource:
1. No prior resource exists in the checkpoint file. In this case, the
resource is simply imported.
2. An external resource exists in the checkpoint file. In this case, the
resource is imported and the old external state is discarded.
3. A non-external resource exists in the checkpoint file and its ID is
different from the ID to import. In this case, the new resource is
imported and the old resource is deleted.
4. A non-external resource exists in the checkpoint file, but the ID is
the same as the ID to import. In this case, the import ID is ignored
and the resource is treated as it would be in all cases except for
changes that would replace the resource. In that case, the step
generator issues an error that indicates that the import ID should be
removed: were we to move forward with the replace, the new state of
the stack would fall under case (3), which is almost certainly not
what the user intends.
Fixes#1662.
There current RPC model for Pulumi allows secret values to be deeply
embedded in lists or maps, however at the language level, since we
track secrets via `Output<T>` we need to ensure that during
deserialization, if a list or a map contains a secret, we need to
instead treat it as if the entire list or map was a secret.
We have logic in the language runtimes to do this as part of
serialization. There were a few issues this commit addresses:
- We were not promoting secretness across arrays in either Node or
Python
- For Python, our promotion logic was buggy and caused it to behave in
a manner where if any value was secret, the output values of the
object would be corrupted, because we'd incorrectly treat the
outputs as a secret who's value was a map, instead of a map of
values (some of which may be secret).
This caused very confusing behavior, because it would appear that a
resource creation call just did not set various output properties when
one or more of them ended up containing a secret.
`Output<T>` now tracks if an output represents secret data or
not. When secret, it is marshalled as a secret value and we signal to
the resource monitor that it is safe to return secret values to us.
The `pulumi` module exports a new functiion, `secret<T>` which works
in the same was a `output<T>` except that it marks the underlying
output as a secret.
This secret bit flows as you would expect across `all`'s and
`apply`'s.
Note that in process memory, the raw value is still present, when you
run an `apply` for a secret output, you are able to see the raw
value. In addition, if you capture a secret output with a lambda, the
raw value will be present in the captured source text.
* NodeJS: allow callers to override provider version
* Python: allow callers to override provider version
* NodeJS: add version for invoke
* Python: add version to invoke
* NodeJS: add tests for ReadResource
* Post-merge cleanup
* update doc comments
Fixes#2277.
Adds a new ignoreChanges resource option that allows specifying a list of property names whose values will be ignored during updates. The property values will be used for Create, but will be ignored for purposes of updates, and as a result also cannot trigger replacements.
This is a feature of the Pulumi engine, not of the resource providers, so no new logic is needed in providers to support this feature. Instead, the engine simply replaces the values of input properties in the goal state with old inputs for properties marked as ignoreChanges.
Currently, only top level properties may be specified in ignoreChanges. In the future, this could be extended to support paths to nested properties (including into array elements) with a JSONPath/JMESPath syntax.
This update includes several changes to core `@pulumi/pulumi` constructs that will not play nicely
in side-by-side applications that pull in prior versions of this package. As such, we are rev'ing
the minor version of the package from 0.16 to 0.17. Recent version of `pulumi` will now detect,
and warn, if different versions of `@pulumi/pulumi` are loaded into the same application. If you
encounter this warning, it is recommended you move to versions of the `@pulumi/...` packages that
are compatible. i.e. keep everything on 0.16.x until you are ready to move everything to 0.17.x.
### Improvements
- `Output<T>` now 'lifts' property members from the value it wraps, simplifying common coding patterns. Note: this wrapping only happens for POJO values, not `Output<Resource>`s.
- Depending on a **Component** Resource will now depend on all other Resources parented by that
Resource. This will help out the programming model for Component Resources as your consumers can
just depend on a Component and have that automatically depend on all the child Resources created
by that Component. Note: this does not apply to a **Custom** resource. Depending on a
CustomResource will still only wait on that single resource being created, not any other Resources
that consider that CustomResource to be a parent.
- Add support for per-property dependencies to the Go SDK
- Add tests for first-class secret rejection in the checkpoint and RPC
layers and language SDKs
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
