- Show Emojis on non-Windows platforms, instead of just macOS
- Change help text for `pulumi logs` to clarify the logs are specific
to a stack, not a project
- Display stack name when showing logs
- Have preamble text show to users for engine operations read a little
nicer
We were generating incorrect URLs for stacks on the new identity
model. When we don't have a repository in our ProjectIdentifier, the
URL's in the service use "-" for the repository and project names.
This issue arises becuase the behavior we're currently getting from Diff
for TF-based providers differs from the behavior we expect. We are
presenting the provider with the old state and new inputs. If the old
state contains output properties that differ from the new inputs, the
provider will detect a diff where we may expect no changes.
Rather than deferring to the provider for all diffs, these changes only
defer to the provider if a legacy diff was detected (i.e. there is some
difference between the old and new provider-calculated inputs).
* Re-introduce interface for snapshot management
Snapshot management was done through the Update interface; this commit
splits it into a separate interface
* Put the SnapshotManager instance onto the engine context
* Remove SnapshotManager from planContext and updateActions now that it can be accessed by engine Context
PPCs are no longer a central concept to our model, but instead a
feature that that pulumi.com provides to some organizations. Let's
remove most mentions of PPCs except for cases where we really need to
talk about them (e.g. when a stack is actually hosted in a PPC instead
of just via the normal pulumi.com service)
Also remove some "in the Pulumi Cloud" messages from the CLI, as using
the Pulumi Cloud is now the only real way to use pulumi.
Fixespulumi/pulumi-service#1117
The cloud backend would fail if `nil` was passed in as the options to
use when creating a stack. However, we passed nil in places where we
allow the user to create stacks interacively. I noticed this while
dogfooding.
In the cloud backend, treat a `nil` opts as if the default set of
options was passed.
Do not fire a "resource outputs" display event for component resources
after their initial registration. Instead, defer this event until the
component's `RegisterResourceOutputs` call arrives.
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This command cancels a stack's currently running update, if any. It can
be used to recover from the scenario in which an update is aborted
without marking the running update as complete. Once an update has been
cancelled, it is likely that the affected stack will need to be repaired
via an pair of export/import commands before future updates can succeed.
This is part of #1077.
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...
This change introduces support for using the cloud backend when
`pulumi init` has not been run. When this is the case, we use the new
identity model, where a stack is referenced by an owner and a stack
name only.
There are a few things going on here:
- We add a new `--owner` flag to `pulumi stack init` that lets you
control what account a stack is created in.
- When listing stacks, we show stacks owned by you and any
organizations you are a member of. So, for example, I can do:
* `pulumi stack init my-great-stack`
* `pulumi stack init --owner pulumi my-great-stack`
To create a stack owned by my user and one owned by my
organization. When `pulumi stack ls` is run, you'll see both
stacks (since they are part of the same project).
- When spelling a stack on the CLI, an owner can be optionally
specified by prefixing the stack name with an owner name. For
example `my-great-stack` means the stack `my-great-stack` owned by
the current logged in user, where-as `pulumi/my-great-stack` would
be the stack owned by the `pulumi` organization
- `--all` can be passed to `pulumi stack ls` to see *all* stacks you
have access to, not just stacks tied to the current project.
Long term, a stack name alone will not be sufficent to address a
stack. Introduce a new `backend.StackReference` interface that allows
each backend to give an opaque stack reference that can be used across
operations.
To prepare for a world where stack names must be unique across an
owner, add some randomness to the names we use for stacks as part of
our integration tests.
This change removes the need to `pulumi init` when targeting the local
backend. A fair amount of the change lays the foundation that the next
set of changes to stop having `pulumi init` be used for cloud stacks
as well.
Previously, `pulumi init` logically did two things:
1. It created the bookkeeping directory for local stacks, this was
stored in `<repository-root>/.pulumi`, where `<repository-root>` was
the path to what we belived the "root" of your project was. In the
case of git repositories, this was the directory that contained your
`.git` folder.
2. It recorded repository information in
`<repository-root>/.pulumi/repository.json`. This was used by the
cloud backend when computing what project to interact with on
Pulumi.com
The new identity model will remove the need for (2), since we only
need an owner and stack name to fully qualify a stack on
pulumi.com, so it's easy enough to stop creating a folder just for
that.
However, for the local backend, we need to continue to retain some
information about stacks (e.g. checkpoints, history, etc). In
addition, we need to store our workspace settings (which today just
contains the selected stack) somehere.
For state stored by the local backend, we change the URL scheme from
`local://` to `local://<optional-root-path>`. When
`<optional-root-path>` is unset, it defaults to `$HOME`. We create our
`.pulumi` folder in that directory. This is important because stack
names now must be unique within the backend, but we have some tests
using local stacks which use fixed stack names, so each integration
test really wants its own "view" of the world.
For the workspace settings, we introduce a new `workspaces` directory
in `~/.pulumi`. In this folder we write the workspace settings file
for each project. The file name is the name of the project, combined
with the SHA1 of the path of the project file on disk, to ensure that
multiple pulumi programs with the same project name have different
workspace settings.
This does mean that moving a project's location on disk will cause the
CLI to "forget" what the selected stack was, which is unfortunate, but
not the end of the world. If this ends up being a big pain point, we
can certianly try to play games in the future (for example, if we saw
a .git folder in a parent folder, we could store data in there).
With respect to compatibility, we don't attempt to migrate older files
to their newer locations. For long lived stacks managed using the
local backend, we can provide information on where to move things
to. For all stacks (regardless of backend) we'll require the user to
`pulumi stack select` their stack again, but that seems like the
correct trade-off vs writing complicated upgrade code.
This field indicates the schema of the serialized deployment. This field
behaves identically to the `Version` field of
`PatchUpdateCheckpointRequest`.
This is part of pulumi/pulumi-service#1046
And make the deployment an opaque JSON message. The verison field
indicates the schema of the deployment. A missing version field will
behave as if the version was set to `1`. A version of `1` indicates that
the serialized deployment has the `DeploymentV1` schema.
This is part of pulumi/pulumi-service#1046.
This covers most of the transitive closure of the types that appear in a
checkpoint. A breaking change to any of these types implies a bump in
the checkpoint version number.
This is part of pulumi/pulumi-service#1046.
This makes two minor tweaks to the login prompt:
1. Change the text so that it hyperlinks in most terminals, including
iTerm, in a way that doesn't include excess characters.
2. Disable echoing of the token.
A previous change altered the calculation of plugin sizes broke the
ability to install plugins that weren't backed by a directory. This
fixes that by making getPluginSize act correctly for any kind of path.
