While we wait for upstream to fix the security issue, we'll just pass
`--no-audit` to `npm install` when creating a new project. Since the
warning is against an indirect dependency of @pulumi/pulumi, we can't
actually address the issue ourselves.
Mitigates #1350
In pulumi/pulumi#1356, we observed that we can fail during a destroy
because we attempt to load the language plugin, which now eagerly looks
for the @pulumi/pulumi package.
This is also blocking ingestion of the latest engine bits into the PPC.
It turns out that for destroy (and refresh), we have no need for the
language plugin. So, let's skip loading it when appropriate.
These changes add support for adding a tracing header to API requests
made to the Pulumi service. Setting the `PULUMI_TRACING_HEADER`
environment variable or enabling debug commands and passing the
`--tracing-header` will change the value sent in this header. Setting
this value to `1` will request that the service enable distributed
tracing for all requests made by a particular CLI invocation.
The newly added `pulumi config refresh` updates your local copy of the
Pulumi.<stack-name>.yaml file to have the same configuration as the
most recent deployment in the cloud.
This can be used in a varirty of ways. One place we plan to use it is
in automation to clean up "leaked" stacks we have in CI. With the
changes you'll now be able to do the following:
```
$ cd $(mktemp -d)
$ echo -e "name: who-cares\nruntime: nodejs" > Pulumi.yaml
$ pulumi stack select <leaked-stack-name>
$ pulumi config refresh -f
$ pulumi destroy --force
```
Having a simpler gesture for the above is something we'll want to do
long term (we should be able to support `pulumi destory <stack-name>`
from a completely empty folder, today you need a Pulumi.yaml file
present, even if the contents don't matter).
But this gets us a little closer to where we want to be and introduces
a helpful primitive in the system.
Contributes to #814
These changes add support for injecting client tracing spans into HTTP
requests to the Pulumi API. The server can then rematerialize these span
references and attach its own spans for distributed tracing.
This change moves Git failures from glog.Warnings, which we don't
really pay attention, to true CLI warnings.
This will ensure we at least get bug reports in the event that this
fails on some user machine out in the wild. They are still non-fatal,
of course, since such a failure needn't prevent an update from happening.
This change captures the Git committer and author's login and email
addresses, so that we can display them prominently in the service. At
the moment, we only attribute updates to the identity that performed the
update which, in CI scenarios, is often always the same person for an
organization. This makes Pulumi look like a needlessly lonely place.
These changes enable tracing of Pulumi API calls.
The span with which to associate an API call is passed via a
`context.Context` parameter. This required plumbing a
`context.Context` parameter through a rather large number of APIs,
especially in the backend.
In general, all API calls are associated with a new root span that
exists for essentially the entire lifetime of an invocation of the
Pulumi CLI. There were a few places where the plumbing got a bit hairier
than I was willing to address with these changes; I've used
`context.Background()` in these instances. API calls that receive this
context will create new root spans, but will still be traced.
* Initialize a new stack as part of `pulumi new`
* Prompt for values with defaults preselected
* Install dependencies
* Prompt for default config values
This changes the CLI interface in a few ways:
* `pulumi preview` is back! The alternative of saying
`pulumi update --preview` just felt awkward, and it's a common
operation to want to perform. Let's just make it work.
* There are two flags consistent across all update commands,
`update`, `refresh`, and `destroy`:
- `--skip-preview` will skip the preview step. Note that this
does *not* skip the prompt to confirm that you'd like to proceed.
Indeed, it will still prompt, with a little warning text about
the fact that the preview has been skipped.
* `--yes` will auto-approve the updates.
This lands us in a simpler and more intuitive spot for common scenarios.
I found the flag --force to be a strange name for skipping a preview,
since that name is usually reserved for operations that might be harmful
and yet you're coercing a tool to do it anyway, knowing there's a chance
you're going to shoot yourself in the foot.
I also found that what I almost always want in the situation where
--force was being used is to actually just run a preview and have the
confirmation auto-accepted. Going straight to --force isn't the right
thing in a CI scenario, where you actually want to run a preview first,
just to ensure there aren't any issues, before doing the update.
In a sense, there are four options here:
1. Run a preview, ask for confirmation, then do an update (the default).
2. Run a preview, auto-accept, and then do an update (the CI scenario).
3. Just run a preview with neither a confirmation nor an update (dry run).
4. Just do an update, without performing a preview beforehand (rare).
This change enables all four workflows in our CLI.
Rather than have an explosion of flags, we have a single flag,
--preview, which can specify the mode that we're operating in. The
following are the values which correlate to the above four modes:
1. "": default (no --preview specified)
2. "auto": auto-accept preview confirmation
3. "only": only run a preview, don't confirm or update
4. "skip": skip the preview altogether
As part of this change, I redid a bit of how the preview modes
were specified. Rather than booleans, which had some illegal
combinations, this change introduces a new enum type. Furthermore,
because the engine is wholly ignorant of these flags -- and only the
backend understands them -- it was confusing to me that
engine.UpdateOptions stored this flag, especially given that all
interesting engine options _also_ accepted a dryRun boolean. As of
this change, the backend.PreviewBehavior controls the preview options.
The `go-git` implementation of `git status` is outrageously expensive,
as it performs a hash-based comparision of the working tree against the
committed state with no caching. In some example runs, this takes
upwards of 15 seconds. Because this is on the startup path for updates,
this results in a rather poor user experience.
These changes replace the `go-git` implementation with a call to `git
status --porcelain -z`, which only writes data to stdout if the working
tree is dirty.
Note that these changes also make all git-related update metadata
best-effort.
These changes add a new flag to the CLI, `--profiling`, that enables
CPU and heap profiling as well as execution tracing of the CLI itself.
The argument to this flag serves as a prefix for the profile outputs;
the CPU and heap profiles and execution trace are written to
`[filename].[pid].{cpu,mem,trace}`, respectively.
These changes also fix an issue with `cmdutil.RunFunc` wherein any error
would prevent the command's post-run hooks from executing.
We already have a great history viewing experience on
Pulumi.com. `pulumi history` in the CLI today is basically unuseable,
and instead of working on trying to improve it, let's just remove it
for now.
Fixes#965
This change adds two new (hidden) CLI commands:
* `gen-bash-completion`: This command generates a bash completion
script for the CLI, storing it in the file specified by the 1st arg.
This fixespulumi/pulumi#1172.
* `gen-markdown`: This command generates a directory of Markdown files,
one per command, documenting the CLI commands and their usage.
I originally did these as separate scripts that we can use in our
build processes, but it was actually even easier to make `pulumi` able
to generate them for itself. The nice part about this is that we don't
even need to bundle additional assets in order to distribute e.g. the
bash completion scripts, we can simply tell people to run
$ pulumi gen-bash-completion /etc/bash_completion.d/pulumi
This can also be used in our upcoming Brew installer.
Pat ran into a weird error when trying to do some development agains
the testing cloud:
```
$ pulumi logout
$ pulumi login --cloud-url [test-cloud-url]
Logged into [test-cloud-url]
$ pulumi stack ls
Enter your Pulumi access token from https://pulumi.com/account:
```
In his case, we did not have `current` set in our credentials.json
file (likely due to him calling `pulumi logout` at some point) but we
did have stored credentials for that cloud. When he logged in the CLI
noticed we could reuse the stored credentials but did not update the
the current setting to set the current cloud.
While investigating, I also noticed that `logout` did not always do
the right thing when you were logged into a different backend than
pulumi.com
* Refactor the SnapshotManager interface
Lift snapshot management out of the engine by delegating it to the
SnapshotManager implementation in pkg/backend.
* Add a event interface for plugin loads and use that interface to record plugins in the snapshot
* Remove dead code
* Add comments to Events
* Add a number of tests for SnapshotManager
* CR feedback: use a successful bit on 'End' instead of having a separate 'Abort' API
* CR feedback
* CR feedback: register plugins one-at-a-time instead of the entire state at once
- Show Emojis on non-Windows platforms, instead of just macOS
- Change help text for `pulumi logs` to clarify the logs are specific
to a stack, not a project
- Display stack name when showing logs
- Have preamble text show to users for engine operations read a little
nicer
PPCs are no longer a central concept to our model, but instead a
feature that that pulumi.com provides to some organizations. Let's
remove most mentions of PPCs except for cases where we really need to
talk about them (e.g. when a stack is actually hosted in a PPC instead
of just via the normal pulumi.com service)
Also remove some "in the Pulumi Cloud" messages from the CLI, as using
the Pulumi Cloud is now the only real way to use pulumi.
Fixespulumi/pulumi-service#1117
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This command cancels a stack's currently running update, if any. It can
be used to recover from the scenario in which an update is aborted
without marking the running update as complete. Once an update has been
cancelled, it is likely that the affected stack will need to be repaired
via an pair of export/import commands before future updates can succeed.
This is part of #1077.
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...
This change introduces support for using the cloud backend when
`pulumi init` has not been run. When this is the case, we use the new
identity model, where a stack is referenced by an owner and a stack
name only.
There are a few things going on here:
- We add a new `--owner` flag to `pulumi stack init` that lets you
control what account a stack is created in.
- When listing stacks, we show stacks owned by you and any
organizations you are a member of. So, for example, I can do:
* `pulumi stack init my-great-stack`
* `pulumi stack init --owner pulumi my-great-stack`
To create a stack owned by my user and one owned by my
organization. When `pulumi stack ls` is run, you'll see both
stacks (since they are part of the same project).
- When spelling a stack on the CLI, an owner can be optionally
specified by prefixing the stack name with an owner name. For
example `my-great-stack` means the stack `my-great-stack` owned by
the current logged in user, where-as `pulumi/my-great-stack` would
be the stack owned by the `pulumi` organization
- `--all` can be passed to `pulumi stack ls` to see *all* stacks you
have access to, not just stacks tied to the current project.
Long term, a stack name alone will not be sufficent to address a
stack. Introduce a new `backend.StackReference` interface that allows
each backend to give an opaque stack reference that can be used across
operations.
This change removes the need to `pulumi init` when targeting the local
backend. A fair amount of the change lays the foundation that the next
set of changes to stop having `pulumi init` be used for cloud stacks
as well.
Previously, `pulumi init` logically did two things:
1. It created the bookkeeping directory for local stacks, this was
stored in `<repository-root>/.pulumi`, where `<repository-root>` was
the path to what we belived the "root" of your project was. In the
case of git repositories, this was the directory that contained your
`.git` folder.
2. It recorded repository information in
`<repository-root>/.pulumi/repository.json`. This was used by the
cloud backend when computing what project to interact with on
Pulumi.com
The new identity model will remove the need for (2), since we only
need an owner and stack name to fully qualify a stack on
pulumi.com, so it's easy enough to stop creating a folder just for
that.
However, for the local backend, we need to continue to retain some
information about stacks (e.g. checkpoints, history, etc). In
addition, we need to store our workspace settings (which today just
contains the selected stack) somehere.
For state stored by the local backend, we change the URL scheme from
`local://` to `local://<optional-root-path>`. When
`<optional-root-path>` is unset, it defaults to `$HOME`. We create our
`.pulumi` folder in that directory. This is important because stack
names now must be unique within the backend, but we have some tests
using local stacks which use fixed stack names, so each integration
test really wants its own "view" of the world.
For the workspace settings, we introduce a new `workspaces` directory
in `~/.pulumi`. In this folder we write the workspace settings file
for each project. The file name is the name of the project, combined
with the SHA1 of the path of the project file on disk, to ensure that
multiple pulumi programs with the same project name have different
workspace settings.
This does mean that moving a project's location on disk will cause the
CLI to "forget" what the selected stack was, which is unfortunate, but
not the end of the world. If this ends up being a big pain point, we
can certianly try to play games in the future (for example, if we saw
a .git folder in a parent folder, we could store data in there).
With respect to compatibility, we don't attempt to migrate older files
to their newer locations. For long lived stacks managed using the
local backend, we can provide information on where to move things
to. For all stacks (regardless of backend) we'll require the user to
`pulumi stack select` their stack again, but that seems like the
correct trade-off vs writing complicated upgrade code.
Upcoming work to remove the need for `pulumi init` makes testing the
upgrade code much harder than it did in the past (since workspace data
is moving to a different location on the file system, as well as some
other changes).
Instead of trying to maintain the code and test, let's just remove
it. Folks who haven't migrated (LM and the PPC deployment in the
service) should use the 0.11.3 or earlier CLI to migrate their
projects (simply by logging in and running a pulumi command) or move
things forward by hand.
