* Add a new metadata property for BuildNumber. Update Travis and GitLab to set both Build ID and Build Number. Add link to env vars doc for Codefresh.
* Update changelog
* Update CI vars detection test.
* Add PR number to changelog.
If the algorithm is unspecified, we provide a reasonable default. If an
alternative is provided (via an undocumented route), we use that,
however.
This commit brings us into line with the documentation.
Fixes#3359.
Adds a new experimental `pulumi watch` CLI command which can be used for inner loop development on a Pulumi stack. This command is only available currently via `PULUMI_EXPERIMENTAL=true` while in active development.
The `watch` command does the following:
1. Watches the workspace (the tree rooted at the `Pulumi.yaml` file) for changes
2. Triggers an `update` to the stack whenever there is a change
3. Streams output containing summaries of key update events as well as logs from any resources under management into a combined CLI output
Part of https://github.com/pulumi/pulumi/issues/3448.
The PULUMI_EXPERIMENTAL flag also makes`query` and `policy` available.
This change adds support for lists and maps in config. We now allow
lists/maps (and nested structures) in `Pulumi.<stack>.yaml` (or
`Pulumi.<stack>.json`; yes, we currently support that).
For example:
```yaml
config:
proj:blah:
- a
- b
- c
proj:hello: world
proj:outer:
inner: value
proj:servers:
- port: 80
```
While such structures could be specified in the `.yaml` file manually,
we support setting values in maps/lists from the command line.
As always, you can specify single values with:
```shell
$ pulumi config set hello world
```
Which results in the following YAML:
```yaml
proj:hello world
```
And single value secrets via:
```shell
$ pulumi config set --secret token shhh
```
Which results in the following YAML:
```yaml
proj:token:
secure: v1:VZAhuroR69FkEPTk:isKafsoZVMWA9pQayGzbWNynww==
```
Values in a list can be set from the command line using the new
`--path` flag, which indicates the config key contains a path to a
property in a map or list:
```shell
$ pulumi config set --path names[0] a
$ pulumi config set --path names[1] b
$ pulumi config set --path names[2] c
```
Which results in:
```yaml
proj:names
- a
- b
- c
```
Values can be obtained similarly:
```shell
$ pulumi config get --path names[1]
b
```
Or setting values in a map:
```shell
$ pulumi config set --path outer.inner value
```
Which results in:
```yaml
proj:outer:
inner: value
```
Of course, setting values in nested structures is supported:
```shell
$ pulumi config set --path servers[0].port 80
```
Which results in:
```yaml
proj:servers:
- port: 80
```
If you want to include a period in the name of a property, it can be
specified as:
```
$ pulumi config set --path 'nested["foo.bar"]' baz
```
Which results in:
```yaml
proj:nested:
foo.bar: baz
```
Examples of valid paths:
- root
- root.nested
- 'root["nested"]'
- root.double.nest
- 'root["double"].nest'
- 'root["double"]["nest"]'
- root.array[0]
- root.array[100]
- root.array[0].nested
- root.array[0][1].nested
- root.nested.array[0].double[1]
- 'root["key with \"escaped\" quotes"]'
- 'root["key with a ."]'
- '["root key with \"escaped\" quotes"].nested'
- '["root key with a ."][100]'
Note: paths that contain quotes can be surrounded by single quotes.
When setting values with `--path`, if the value is `"false"` or
`"true"`, it will be saved as the boolean value, and if it is
convertible to an integer, it will be saved as an integer.
Secure values are supported in lists/maps as well:
```shell
$ pulumi config set --path --secret tokens[0] shh
```
Will result in:
```yaml
proj:tokens:
- secure: v1:wpZRCe36sFg1RxwG:WzPeQrCn4n+m4Ks8ps15MxvFXg==
```
Note: maps of length 1 with a key of “secure” and string value are
reserved for storing secret values. Attempting to create such a value
manually will result in an error:
```shell
$ pulumi config set --path parent.secure foo
error: "secure" key in maps of length 1 are reserved
```
**Accessing config values from the command line with JSON**
```shell
$ pulumi config --json
```
Will output:
```json
{
"proj:hello": {
"value": "world",
"secret": false,
"object": false
},
"proj:names": {
"value": "[\"a\",\"b\",\"c\"]",
"secret": false,
"object": true,
"objectValue": [
"a",
"b",
"c"
]
},
"proj:nested": {
"value": "{\"foo.bar\":\"baz\"}",
"secret": false,
"object": true,
"objectValue": {
"foo.bar": "baz"
}
},
"proj:outer": {
"value": "{\"inner\":\"value\"}",
"secret": false,
"object": true,
"objectValue": {
"inner": "value"
}
},
"proj:servers": {
"value": "[{\"port\":80}]",
"secret": false,
"object": true,
"objectValue": [
{
"port": 80
}
]
},
"proj:token": {
"secret": true,
"object": false
},
"proj:tokens": {
"secret": true,
"object": true
}
}
```
If the value is a map or list, `"object"` will be `true`. `"value"` will
contain the object as serialized JSON and a new `"objectValue"` property
will be available containing the value of the object.
If the object contains any secret values, `"secret"` will be `true`, and
just like with scalar values, the value will not be outputted unless
`--show-secrets` is specified.
**Accessing config values from Pulumi programs**
Map/list values are available to Pulumi programs as serialized JSON, so
the existing
`getObject`/`requireObject`/`getSecretObject`/`requireSecretObject`
functions can be used to retrieve such values, e.g.:
```typescript
import * as pulumi from "@pulumi/pulumi";
interface Server {
port: number;
}
const config = new pulumi.Config();
const names = config.requireObject<string[]>("names");
for (const n of names) {
console.log(n);
}
const servers = config.requireObject<Server[]>("servers");
for (const s of servers) {
console.log(s.port);
}
```
The code forced the secret backend to be passphrase when using a
`filestate.Backend`, which means you can't use GCP/AWS/Azure KMS with
a cloud bucket state storage.
This PR removes that check and only forces passphrase storage when
explicitly set.
* Add support for filtering stacks by organization, tag
* Update CHANGELOG.md
* Address PR feedback
* Address even more PR feedback
* Support empty-string filters
Adds support for additional cloud secrets providers (AWS KMS, Azure KeyVault, Google Cloud KMS, and HashiCorp Vault) as the encryption backend for Pulumi secrets. This augments the previous choice between using the app.pulumi.com-managed secrets encryption or a fully-client-side local passphrase encryption.
This is implemented using the Go Cloud Development Kit support for pluggable secrets providers.
Like our cloud storage backend support which also uses Go Cloud Development Kit, this PR also bleeds through to users the URI scheme's that the Go CDK defines for specifying each of secrets providers - like `awskms://alias/LukeTesting?region=us-west-2` or `azurekeyvault://mykeyvaultname.vault.azure.net/keys/mykeyname`.
Also like our cloud storage backend support, this PR doesn't solve for how to configure the cloud provider client used to resolve the URIs above - the standard ambient credentials are used in both cases. Eventually, we will likely need to provide ways for both of these features to be configured independently of each other and of the providers used for resource provisioning.
This package's flags conflict with those in google/glog. Replace all
references to this package with references to
pulumi/pulumi/pkg/util/logging, and change that package to explicitly
call `flag.CommandLine.Parse` with an empty slice.
This should make it much easier to consume these packages in downstream
repos that have direct or indirect dependencies on google/glog.
Thse changes make a subtle but critical adjustment to the process the
Pulumi engine uses to determine whether or not a difference exists
between a resource's actual and desired states, and adjusts the way this
difference is calculated and displayed accordingly.
Today, the Pulumi engine get the first chance to decide whether or not
there is a difference between a resource's actual and desired states. It
does this by comparing the current set of inputs for a resource (i.e.
the inputs from the running Pulumi program) with the last set of inputs
used to update the resource. If there is no difference between the old
and new inputs, the engine decides that no change is necessary without
consulting the resource's provider. Only if there are changes does the
engine consult the resource's provider for more information about the
difference. This can be problematic for a number of reasons:
- Not all providers do input-input comparison; some do input-state
comparison
- Not all providers are able to update the last deployed set of inputs
when performing a refresh
- Some providers--either intentionally or due to bugs--may see changes
in resources whose inputs have not changed
All of these situations are confusing at the very least, and the first
is problematic with respect to correctness. Furthermore, the display
code only renders diffs it observes rather than rendering the diffs
observed by the provider, which can obscure the actual changes detected
at runtime.
These changes address both of these issues:
- Rather than comparing the current inputs against the last inputs
before calling a resource provider's Diff function, the engine calls
the Diff function in all cases.
- Providers may now return a list of properties that differ between the
requested and actual state and the way in which they differ. This
information will then be used by the CLI to render the diff
appropriately. A provider may also indicate that a particular diff is
between old and new inputs rather than old state and new inputs.
Fixes#2453.
Validate the value is well formed much earlier so you don't end up
seeing you've picked a bad value in the middle of trying to create
your new stack. Update the helptext to list currently supported
values.
Fixes#2727
This change allows using the passphrase secrets manager when creating
a stack managed by the Pulumi service. `pulumi stack init`, `pulumi
new` and `pulumi up` all learned a new optional argument
`--secrets-provider` which can be set to "passphrase" to force the
passphrase based secrets provider to be used. When unset the default
secrets provider is used based on the backend (for local stacks this
is passphrase, for remote stacks, it is the key managed by the pulumi
service).
As part of this change, we also initialize the secrets manager when a
stack is created, instead of waiting for the first time a secret
config value is stored. We do this so that if an update is run using
`pulumi.secret` before any secret configuration values are used, we
already have the correct encryption method selected for a stack.
The next change is going to do some code motion that would create some
circular imports if we did not do this. There was nothing that
required the members we were moving be in the backend package, so it
was easy enough to pull them out.
The previous changes to remove config loading out of the backend means
that the backends no longer need to track this information, as they
never use it.
* Add a var for PRNumber. Add an environment metadata key for PR number.
* Move the detection of PULUMI_CI_SYSTEM into vars.DetectVars(). Set the PRNumber CI property based on respective env vars from each CI system.
* Add Azure Pipelines build variables.
* Add tests for DetectVars.
* Added changelog entry for Azure Pipelines.
* Capture the value of env var being modified for the ciutil unit test, and restore their values at the end of them.
* Simplify the DetectVars function by moving the Pulumi CI system code into the switch-case expression.
* Rename the Pulumi CI system to Generic CI. Include the GenericCI system in the test case for DetectVars.
This option allows the user to override the file used to fetch and store
configuration information for a stack. It is available for the config,
destroy, logs, preview, refresh, and up commands.
Note that this option is not persistent: if it is not specified, the
stack's default configuration will be used. If an alternate config file
is used exclusively for a stack, it must be specified to all commands
that interact with that stack.
This option can be used to share plaintext configuration across multiple
stacks. It cannot be used to share secret configuration, as secrets are
associated with a particular stack and cannot be decryptex by other
stacks.
We run the same suite of changes that we did on gometalinter. This
ended up catching a few new issues, some of which were addressed and
some of which were baselined.
* Introduce new metadata keys `vcs.repo`, `vcs.kind` and `vcs.owner` to keep the keys generic for any vcs. Expanded the git SSH regex to account for bitbucket's .org domain.
* Introduce new stack tags keys with the same theme of detecting the vcs.
This change adds GitLab CI support, by sniffing out the right
variables (equivalent to what we already do for Travis).
I've also restructured the code to share more logic with our
existing CI detection code, now moved to the pkg/util/ciutil
package, and will be fleshing this out more in the days to come.
There is a seldom-used capability in our CLI, the ability to pass
-m to specify an update message, which we will then show prominently.
At the same time, we already scrape some interesting information from
the Git repo from which an update is performed, like the SHA hash,
committer, and author information. We explicitly didn't want to scrape
the entire message just in case someone put sensitive info inside of it.
It seems safe -- indeed, appealing -- to use just the title portion
as the default update message when no other has been provided (the
majority case). We'll work on displaying it in a better way, but this
strengthens our GitOps/CI/CD story.
Fixespulumi/pulumi#2008.
Right now, we only support --non-interactive in a few places (up,
refresh, destroy, etc). Over time, we've added it to more (like new).
And now, as we're working on better Docker support (pulumi/pulumi#1991),
we want to support this more globally, so we can, for example, avoid
popping up a web browser inside a Docker contain for logging in.
So, this change makes --non-interactive a global flag. Because it is
a persistent flag, it still works in the old positions, so this isn't
a breaking change to existing commands that use it.
This change adds a --json (short -j) flag for `pulumi stack output`
that prints the results as JSON, rather than our ad-hoc format.
Fixespulumi/pulumi#1863.
If you run an operation that requires a stack, but you don't have
one selected, you'll be prompted. This happens all over the place.
Sadly, your selection at this prompt is not remembered (unless you
opt to create a new one), meaning you'll just keep getting prompted.
The fix is simple: we just ignored the setCurrent bool previously;
we need to respect it and call the SetCurrentStack function.
This fixespulumi/pulumi#1831.
This commit adds checks for a set of predefined environment variables:
- PULUMI_CI_SYSTEM
- PULUMI_CI_BUILD_ID
- PULUMI_CI_BUILD_TYPE
- PULUMI_CI_BUILD_URL
- PULUMI_CI_PULL_REQUEST_SHA
If PULUMI_CI_SYSTEM is set in the environment, CI configuration is
extracted from the remaining variables for sending to the backend, and
disables the checks for supported systems (currently only Travis CI).
This increases the flexibility of the Pulumi CLI by not requiring
specific support for particular CI systems to be added, provided the
necessary environment variables are configured for the job - this should
be possible for at least TeamCity, Jenkins, AWS CodeBuild, Azure DevOps
Pipelines, and likely most other systems.
This should not replace native support for detecting more CI systems in
future, however, since it requires more work of the user.