This command converts an appdash trace into a pprof file for use with
`go tool pprof`. Spans are converted into stacks by sampling each root
span at a given rate and recording the stack of subspans at each sample.
These changes also replace the conditional addition of experimental and
debug commands with conditional visibility. Experimental and debug
commands will always be available, but will be hidden unless the
appropraite environment variables are set.
Co-authored-by: Levi Blackstone <levi@pulumi.com>
Update the RegisterResource method in the ResourceMonitor
to unmarshal the providers field added in d297db3 and then resolve
any provider references so that they can be set on the Construct call.
Although raw provider resources accept an input that allows a user to
specifiy a provider version to use, this input is not reflected in
current SDK code generation. Furthermore, we already have a method to
specify the provider version that should be used for a resource: the
"version" resource option. These changes update the code that handles
provider resource registrations to autmoatically populate the version
input from the "version" resource option if the option is present.
Fixes https://github.com/pulumi/pulumi-azure/issues/803.
These changes are a combination of three commits, each of which
contributes to the testing and/or fixing of a problem with marshaling
unknowns in `plugin.provider.Update` when `preview` is true.
## deploytest: add support for gRPC adapters.
These changes add support for communicating with providers using the
gRPC adapters to the deploytest pacakage. This makes it easier to test
the gRPC adapters across typical lifecycle patterns.
Supporting these changes are two additions to the `resource/plugin`
package:
1. A type that bridges between the `plugin.Provider` interface and the
`pulumirpc.ResourceProviderServer`
2. A function to create a `plugin.Provider` given a
`pulumirpc.ResourceProviderClient`
The deploytest package uses these to wrap an in-process
`plugin.Provider` in a gRPC interface and connect to it without using
the default plugin host, respectively.
## pulumi_test: test provider preview over gRPC.
Add a test that runs the provider preview lifecycle, but using a
provider that communicates over gRPC.
## gRPC bridge: fix unknowns in `Update` previews
Set the `KeepUnknowns` and `RejectUnknowns` bits in the `MarshalOptions`
used when unmarshaling update results to preserve unknowns during a
preview and reject them otherwise.
These changes also set the `RejectUnknowns` bit in the `MarshalOptions`
used by `Create` if `preview` is false, and fix a bug in the array
unmarshaler that could cause out-of-bounds accesses.
Fixes https://github.com/pulumi/pulumi/issues/6004.
State tracking for goals was implemented using a raw map,
but this was not safe for concurrent read/write access from
multiple goroutines. Switched to using a sync.Map, which
is threadsafe.
The step generator was incorrectly tracking goal states for
old resources, which could lead to a panic if the resource
was removed in the update. This fix only generates goal
states for resources that exist in the updated program.
Now that resources are serialized as refs, ComponentResources
may try to unmarshal local resource refs before they are
initialized during the RegisterResource step.
This change avoids that issue by skipping Output marshaling
for local ComponentResources during the RegisterResource step.
These Outputs will be handled instead during the
RegisterResourceOutputs step.
Co-authored-by: Pat Gavlin <pat@pulumi.com>
The step generator applies `ignoreChanges` pre-processing for all
resources by copying old input values to the new goal for any properties
mentioned in the `ignoreChanges` list. However, this pre-processing
depends on the existence of prior inputs, which by definition does not
exist for a resource being imported prior to the issuance of the
`ImportStep`. These changes add this processing to the implementation of
`ImportStep`, using the inputs read from the provider as the prior
inputs.
- Add component ref coverage to the existing test
- Add coverage for a downlevel SDK communicating with an engine that
supports resource refs
- Add coverage for a downlevel engine communicating with an SDK that
supports resource refs
As part of improving coverage, these changes add a knob to explicitly
disable resource refs in the engine without the use of the environment
variable. The environment variable is now only read by the CLI, and has
been restored to its prior polarity (i.e. `PULUMI_ENABLE_RESOURCE_REFERENCES`).
Disable resource ref support until https://github.com/pulumi/pulumi-kubernetes/issues/1405
is fixed. This bug currently affects Python users with recent versions of the pulumi SDK
who are using the pulumi-kubernetes provider.
* Enable resource reference feature by default
Unless the PULUMI_DISABLE_RESOURCE_REFERENCES flag
is explicitly set to a truthy value, the resource reference feature is now
enabled by default.
* Set AcceptResources in the language SDKs
This can be disabled by setting the `PULUMI_DISABLE_RESOURCE_REFERENCES` environment variable to a truthy value.
Co-authored-by: Justin Van Patten <jvp@justinvp.com>
Record new resources after their operations have been run rather than
before in order to ensure that all state is available and appropriately
marked as secret.
Fixes#5803.
To de-risk the Pulumi v2.15.0 release, temporarily revert 679d40950f. Use of resource references will require `PULUMI_EXPERIMENTAL_RESOURCE_REFERENCES=1` to be set until the feature has been enabled by default.
Just what it says on the tin.
The SDK code generator will be updated to use the new `urn`
resource option inside of each module's implementation of
`ResourceModule.construct`.
Part of #2430.
Co-authored-by: Justin Van Patten <jvp@justinvp.com>
Rename deploy.Plan to deploy.Deployment.
There are two benefits to this change:
1. The name "Deployment" more accurately reflects the behavior of the
type, which is responsible for previewing or executing a deployment.
2. Renaming this type frees up the name "Plan" for use when addressing
#2318.
Just what it says on the tin. This is implemented by changing the
`GetPackageConfig` method of `ConfigSource` to return a `PropertyMap`
and ensuring that any secret config is represented by a `Secret`.
The langauge SDKs will use this function to fetch the state required to
deserialize a resource reference. SDK support will be added as a follow-up
change.
Contributes to #2430.
Resources are serialized as their URN, ID, and package version. Each
Pulumi package is expected to register itself with the SDK. The package
will be invoked to construct appropriate instances of rehydrated
resources. Packages are distinguished by their name and their version.
This is the foundation of cross-process resources.
Related to #2430.
Co-authored-by: Mikhail Shilkov <github@mikhail.io>
Co-authored-by: Luke Hoban <luke@pulumi.com>
Co-authored-by: Levi Blackstone <levi@pulumi.com>
These changes add support for provider-side previews of create and
update operations, which allows resource providers to supply output
property values for resources that are being created or updated during a
preview.
If a plugin supports provider-side preview, its create/update methods
will be invoked during previews with the `preview` property set to true.
It is the responsibility of the provider to fill in any output
properties that are known before returning. It is a best practice for
providers to only fill in property values that are guaranteed to be
identical if the preview were instead an update (i.e. only those output
properties whose values can be conclusively determined without
actually performing the create/update operation should be populated).
Providers that support previews must accept unknown values in their
create and update methods.
If a plugin does not support provider-side preview, the inputs to a
create or update operation will be propagated to the outputs as they are
today.
Fixes#4992.
* Revise host mode.
The current implementation of host mode uses a `pulumi host` command and
an ad-hoc communication protocol between the engine and client to
connect a language host after the host has begun listening. The most
significant disadvantages of this approach are the communication
protocol (which currently requires the use of stdout), the host-specific
command, and the difficulty of accommodating the typical program-bound
lifetime for an update.
These changes reimplement host mode by adding engine support for
connecting to an existing language runtime service rather than launching
a plugin. This capability is provided via an engine-specific language
runtime, `client`, which accepts the address of the existing languge
runtime service as a runtime option. The CLI exposes this runtime via
the `--client` flag to the `up` and `preview` commands, which similarly
accepts the address of an existing language runtime service as an
argument. These changes also adjust the automation API to consume the
new host mode implementation.
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
Previously, streamInvoke was only supported by
the query command. Copied the implementation
into the resource monitor, which will allow
streaming invoke commands to run during updates.
Also fixed a bug with cancellation of streaming
invokes. The check was comparing against a
hardcoded string, which did not match the actual
error string. Instead, we can rely on the error code.
- Remove `Info` from `Source`. This method was not used.
- Remove `Stack` from `EvalSource`. This method was not used.
- Remove `Type` and `URN` from `Step`. These values are available via
`Res().URN.Type()` and `Res().URN`, respectively. This removes the
possibility of inconsistencies between the type, URN, and state of the
resource associated with a `Step`.
- Remove URN from StepEventMetadata.
When referencing `secretOutputNames` in from another stack, spurious
diffs can often be created because the secret output slice was not
ordered.
This PR orders the slice before it's added to the propertymap, ensuring
the order always remains the same
After importing some resources, and running a second update with the
import still applied, an unexpected replace would occur. This wouldn't
happen for the vast majority of resources, but for some it would.
It turns out that the resources that trigger this are ones that use a
different format of identifier for the import input than they do for the
ID property.
Before this change, we would trigger an import-replacement when an
existing resource's ID property didn't match the import property, which
would be the case for the small set of resources where the input
identifier is different than the ID property.
To avoid this, we now store the `importID` in the statefile, and
compare that to the import property instead of comparing the ID.
* Make `async:true` the default for `invoke` calls (#3750)
* Switch away from native grpc impl. (#3728)
* Remove usage of the 'deasync' library from @pulumi/pulumi. (#3752)
* Only retry as long as we get unavailable back. Anything else continues. (#3769)
* Handle all errors for now. (#3781)
* Do not assume --yes was present when using pulumi in non-interactive mode (#3793)
* Upgrade all paths for sdk and pkg to v2
* Backport C# invoke classes and other recent gen changes (#4288)
Adjust C# generation
* Replace IDeployment with a sealed class (#4318)
Replace IDeployment with a sealed class
* .NET: default to args subtype rather than Args.Empty (#4320)
* Adding system namespace for Dotnet code gen
This is required for using Obsolute attributes for deprecations
```
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'ObsoleteAttribute' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'Obsolete' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
```
* Fix the nullability of config type properties in C# codegen (#4379)
Pulumi HCL2 IR:
- Add support for invokes
- Add support for resource options, incl. ranged resources
- Allow the apply rewriter to ignore promise-typed values
- Add tests for the binder
- Add support functions for TF: entries and range
NodeJS codegen:
- Simplify for expression codegen
- Add support for invoke codegen
- Add support for entries and range functions
- Add tests
Python codegen:
- Implement codegen for most expression types
- Add support for invoke codegen
- Add tests