Parallelize collection of logs at each layer of the resource tree walk. Since almost all cost of log collection is at leaf nodes, this should allow the total time for log collection to be close to the time taken for the single longest leaf node, instead of the sum of all leaf nodes.
We need to clear the resource filter during the resource tree walk to ensure that logs from children of matched resources are collected and aggregated.
We have to reverse engineer the name from the soruce LogGroup information since that is all we got at runtime, but luckily that is sufficient given current name generation approach.
This kind of code is *very* sensitive to any changes to automatic name generation - but that is likely inevitable at this layer.
Adds support for top-level exports in the main script of a Pulumi Program to be captured as stack-level output properties.
This create a new `pulumi:pulumi:Stack` component as the root of the resource tree in all Pulumi programs. That resources has properties for each top-level export in the Node.js script.
Running `pulumi stack` will display the current value of these outputs.
A handful of UX improvments for config:
- `pulumi config ls` has been removed. Now, `pulumi config` with no
arguments prints the table of configuration values for a stack and
a new command `pulumi config get <key>` prints the value for a
single configuration key (useful for scripting).
- `pulumi config text` and `pulumi config secret` have been merged
into a single command `pulumi config set`. The flag `--secret` can
be used to encrypt the value we store (like `pulumi config secret`
used to do).
- To make it obvious that setting a value with `pulumi config set` is
in plan text, we now echo a message back to the user saying we
added the configuration value in plaintext.
Fixes#552
This change fixes getProject to return the project name, as
originally intended. (One line was missing.)
It also adds an integration test for this.
Fixespulumi/pulumi#580.
Because the Pulumi.yaml file demarcates the boundary used when
uploading a program to the Pulumi.com service at the moment, we
have trouble when a Pulumi program uses "up and over" references.
For instance, our customer wants to build a Dockerfile located
in some relative path, such as `../../elsewhere/`.
To support this, we will allow the Pulumi.yaml file to live
somewhere other than the main Pulumi entrypoint. For example,
it can live at the root of the repo, while the Pulumi program
lives in, say, `infra/`:
Pulumi.yaml:
name: as-before
main: infra/
This fixespulumi/pulumi#575. Further work can be done here to
provide even more flexibility; see pulumi/pulumi#574.
When producing a snapshot for a plan, we have two resource DAGs. One of
these is the base DAG for the plan; the other is the current DAG for the
plan. Any resource r may be present in both DAGs. In order to produce a
snapshot, we need to merge these DAGs such that all resource
dependencies are correctly preserved. Conceptually, the merge proceeds
as follows:
- Begin with an empty merged DAG.
- For each resource r in the current DAG, insert r and its outgoing
edges into the merged DAG.
- For each resource r in the base DAG:
- If r is in the merged DAG, we are done: if the resource is in the
merged DAG, it must have been in the current DAG, which accurately
captures its current dependencies.
- If r is not in the merged DAG, insert it and its outgoing edges
into the merged DAG.
Physically, however, each DAG is represented as list of resources
without explicit dependency edges. In place of edges, it is assumed that
the list represents a valid topological sort of its source DAG. Thus,
any resource r at index i in a list L must be assumed to be dependent on
all resources in L with index j s.t. j < i. Due to this representation,
we implement the algorithm above as follows to produce a merged list
that represents a valid topological sort of the merged DAG:
- Begin with an empty merged list.
- For each resource r in the current list, append r to the merged list.
r must be in a correct location in the merged list, as its position
relative to its assumed dependencies has not changed.
- For each resource r in the base list:
- If r is in the merged list, we are done by the logic given in the
original algorithm.
- If r is not in the merged list, append r to the merged list. r
must be in a correct location in the merged list:
- If any of r's dependencies were in the current list, they must
already be in the merged list and their relative order w.r.t.
r has not changed.
- If any of r's dependencies were not in the current list, they
must already be in the merged list, as they would have been
appended to the list before r.
Prior to these changes, we had been performing these operations in
reverse order: we would start by appending any resources in the old list
that were not in the new list, then append the whole of the new list.
This caused out-of-order resources when a program that produced pending
deletions failed to run to completion.
Fixes#572.
In an effort to improve performance and overall reliability, this PR moves the responsibility of uploading the Pulumi program from the Pulumi Service to the CLI. (Part of fixing https://github.com/pulumi/pulumi-service/issues/313.)
Previously the CLI would send (the dozens of MiB) program archive to the Service, which would then upload the data to S3. Now the CLI sends the data to S3 directly, avoiding the unnecessary copying of data around.
The Service-side API changes are in https://github.com/pulumi/pulumi-service/pull/323. I tested previews, updates, and destroys running the service and PPC on localhost.
The PR refactors how we handle the three kinds of program updates, and just unifies them into a single method. This makes the diff look crazy, but the code should be much simpler. I'm not sure what to do about supporting all the engine options for the Cloud-variants of Pulumi commands; I suspect that's something that should be handled at a later time.
* Simplify how we capture 'this' in our serialization logic.
* Properly capture 'arguments'
* add tests for 'arguments' capture.
* Properly serialize out 'arguments'
* Invert 'with' and function closure.
This is the smallest possible thing that could work for both the local
development case and the case where we are targeting the Pulumi
Service.
Pulling down the pulumiframework and component packages here is a bit
of a feel bad, but we plan to rework the model soon enough to a
provider model which will remove the need for us to hold on to this
code (and will bring back the factoring where the CLI does not have
baked in knowledge of the Pulumi Cloud Framework).
Fixes#527
These changes introduce a new field, `Raw`, to `diag.Message`. This
field indicates that the contents of the message are not a format string
and should not be rendered via `Sprintf` during stringification.
The plugin std{out,err} readers have been updated to use raw messages,
and the event reader in `pulumi` has been fixed s.t. it does not format
event payloads before display.
Fixes#551.
This change formats log messages the same way that Node.js does
in its console.log/error APIs. This ensures, for example, that
errors have their stack printed if present, and switches over to
just printing the error directly rather than manually toStringing it.
Add the ability to upload data and timing for test runs to S3. Uploaded data is designed to be queried via a service like AWS Athena and these queries can then be imported into BI tools (Excel, QuickSight, PowerBI, etc.)
Initially hook this up to the `minimal` test as a baseline.
Note: for the purposes of this discussion, archives will be treated as
assets, as their differences are not particularly meaningful.
Currently, the identity of an asset is derived from the hash and the
location of its contents (i.e. two assets are equal iff their contents
have the same hash and the same path/URI/inline value). This means that
changing the source of an asset will cause the engine to detect a
difference in the asset even if the source's contents are identical. At
best, this leads to inefficiencies such as unnecessary updates. This
commit changes asset identity so that it is derived solely from an
asset's hash. The source of an asset's contents is no longer part of
the asset's identity, and need only be provided if the contents
themselves may need to be available (e.g. if a hash does not yet exist
for the asset or if the asset's contents might be needed for an update).
This commit also changes the way old assets are exposed to providers.
Currently, an old asset is exposed as both its hash and its contents.
This allows providers to take a dependency on the contents of an old
asset being available, even though this is not an invariant of the
system. These changes remove the contents of old assets from their
serialized form when they are passed to providers, eliminating the
ability of a provider to take such a dependency. In combination with the
changes to asset identity, this allows a provider to detect changes to
an asset simply by comparing its old and new hashes.
This is half of the fix for [pulumi/pulumi-cloud#158]. The other half
involves changes in [pulumi/pulumi-terraform].
If a blob's reported size is incorrect, `archiveTar` may attempt to
write more bytes to an entry than it reported in that entry's header.
These changes provide a bit more context with the resulting error as
well as removing an unnecessary `LimitReader`.
Adds OpenTracing in the Pulumi engine and plugin + langhost subprocesses.
We currently create a single root span for any `Enging.plan` operation - which is a single `preview`, `update`, `destroy`, etc.
The only sub-spans we currently create are at gRPC boundaries, both on the client and server sides and on both the langhost and provider plugin interfaces.
We could extend this to include spans for any other semantically meaningful sections of compute inside the engine, though initial examples show we get pretty good granularity of coverage by focusing on the gRPC boundaries.
In the future, this should be easily extensible to HTTP boundaries and to track other bulky I/O like datastore read/writes once we hook up to the PPC and Pulumi Cloud.
We expose a `--trace <endpoint>` option to enable tracing on the CLI, which we will aim to thread through to subprocesses.
We currently support sending tracing data to a Zipkin-compatible endpoint. This has been validated with both Zipkin and Jaeger UIs.
We do not yet have any tracing inside the TypeScript side of the JS langhost RPC interface. There is not yet automatic gRPC OpenTracing instrumentation (though it looks like it's in progress now) - so we would need to manually create meaningful spans on that side of the interface.
