This fixes a nightly test failure that only occurs on Node.js 11,
due to the JSON output including a diagnostics message the Node.js
runtime prints to stderr during the test run.
This change adds a --json flag to the preview command, enabling
basic JSON serialization of preview plans. This effectively flattens
the engine event stream into a preview structure that contains a list
of steps, diagnostics, and summary information. Each step contains
the deep serialization of resource state, in addition to metadata about
the step, such as what kind of operation it entails.
This is a partial implementation of pulumi/pulumi#2390. In particular,
we only support --json on the `preview` command itself, and not `up`,
meaning that it isn't possible to serialize the result of an actual
deployment yet (thereby limiting what you can do with outputs, etc).
* Enable delete parallelism for Python
* Add CHANGELOG.md entry
* Expand changelog message - upgrade to Python 3
* Rework stack rm test
The service now allows removing a stack if it just contains the top
level `pulumi:pulumi:Stack` resource, so we need to actually create
another resource before `stack rm` fails telling you to pass
`--force`.
Fixes#2444
When `pulumi stack rm` is run against a stack with resources, the
service will respond with an error if `--force` is not
passed. Previously we would just dump the contents of this error and
it looked something like:
`error: [400] Bad Request: Stack still has resources.`
We now handle this case more gracefully, showing our usual "this stack
still has resources" error like we would for the local backend.
Fixes#2431
In #2330 there was a case where if you didn't pass a value to the
`pulumi.Config()` constructor, things would fail in a weird manner.
This shouldn't be the case, and I'm unable to reproduce the issue. So
I'm updating the test to use the form that didn't work at one point so
we can lock in the win.
Fixes#2330
These changes add a new flag to the various `ResourceOptions` types that
indicates that a resource should be deleted before it is replaced, even
if the provider does not require this behavior. The usual
delete-before-replace cascade semantics apply.
Fixes#1620.
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
* Relax baseline for the TestEngineEventPerf test
The mesurments we used to compute the baseline were on a local recent
MacBook. We added some slack, but we've already seen instances of the
baseline being too tight, even with no changes in product code.
This is most common on the OSX machines in Travis, which in general
seem quite slow for many workloads.
We'll bump it up to 8 seconds and if we start hitting that as well,
we'll need to do something more serious.
'python' is not usually symlinked to 'python3' on most distros unless
you are already running in a virtual environment. Launching 'python3'
explicitly ensures that we will either launch the program successfully
or immediately fail, instead of launching the program with Python 2 and
failing with syntax errors at runtime.
This commit also emits an error message asking users to install Python
3.6 or later if we failed to find the 'python3' executable.
Because of a bug in our version scripts (which will be addressed by
pulumi/pulumi#2216) we generate a goofy version when building an
untagged commit in the release branches. That causes our logic to
decide if it should print the upgrade message or not to print an
upgrade message, because it thinks the CLI is out of date.
It then prints the upgrade message and a test fails because it is
expecting an empty stderr.
Just stop checking that stderr was empty, and just validate standard
out.
These changes add a new resource to the Pulumi SDK,
`pulumi.StackReference`, that represents a reference to another stack.
This resource has an output property, `outputs`, that contains the
complete set of outputs for the referenced stack. The Pulumi account
performing the deployment that creates a `StackReference` must have
access to the referenced stack or the call will fail.
This resource is implemented by a builtin provider managed by the engine.
This provider will be used for any custom resources and invokes inside
the `pulumi:pulumi` module. Currently this provider supports only the
`pulumi:pulumi:StackReference` resource.
Fixes#109.
We run the same suite of changes that we did on gometalinter. This
ended up catching a few new issues, some of which were addressed and
some of which were baselined.
* Implement RegisterResourceOutputs for Python 3
RegisterResourceOutputs allows Python 3 programs to export stack outputs
and export outputs off of component resources (which, under the hood,
are the same thing).
Adds a new integration test for stack outputs for Python programs, as
well as add a langhost test for register resource outputs.
Fixespulumi/pulumi#2163
* CR: Rename stack_output -> export
Fix integration tests that hardcoded paths to stack_outputs
* Fix one more reference to stack_outputs
* Fix Python support in integration test framework
Update the integratino test framework to use pipenv to bootstrap new
virtual environments for tests and use those virtual environments to run
pulumi update and pulumi preview.
Fixespulumi/pulumi#2138
* Install packages via 'Dependencies' field
* Remove code for installing packages from Dependencies
In preparation for some workspace restructuring, I decided to scratch a
few itches of my own in the code:
* Change project's RuntimeInfo field to just Runtime, to match the
serialized name in JSON/YAML.
* Eliminate the no-longer-used Context and NoDefaultIgnores fields on
project, and all of the associated legacy PPC-related code.
* Eliminate the no-longer-used IgnoreFile constant.
* Remove a bunch of "// nolint: lll" annotations, and simply format
the structures with comments on dedicated lines, to avoid overly
lengthy lines and lint suppressions.
* Mark Dependencies and InitErrors as `omitempty` in the JSON
serialization directives for CheckpointV2 files. This was done for
the YAML directives, but (presumably accidentally) omitted for JSON.
* Implement RPC for Python 3
* Try not setting PYTHONPATH
* Remove PYTHONPATH line
* Implement Invoke for Python 3
* Implement register resource
* progress
* Rewrite the whole thing
* Fix a few bugs
* All tests pass
* Fix an abnormal shutdown bug
* CR feedback
* Provide a hook for resources to rename properties
As dictionaries and other classes come from the engine, the
translate_property hook can be used to intercept them and rename
properties if desired.
* Fix variable names and comments
* Disable Python integration tests for now
If you took the time to type out `--skip-preview`, we should have high
confidence that you don't want a preview and you're okay with the
operation just happening without a prompt.
Fixes#1448
This adds an option, --suppress-outputs, to many commands, to
avoid printing stack outputs for stacks that might contain sensitive
information in their outputs (like key material, and whatnot).
Fixespulumi/pulumi#2028.
This change adds a --json (short -j) flag for `pulumi stack output`
that prints the results as JSON, rather than our ad-hoc format.
Fixespulumi/pulumi#1863.
- Do not require replacement of dynamic resources due to provider
changes. This is not necessary, and is almost certainly the wrong
thing to do if the dynamic provider is managing a physical resource.
- Return all inputs by default from a dynamic provider's check method.
Currently a dynamic provider that does not implement check will end up
receiving no inputs. This is confusing, and is not the correct default.
* Retire pending deletions at start of plan
Instead of letting pending deletions pile up to be retired at the end of
a plan, this commit eagerly disposes of any pending deletions that were
pending at the end of the previous plan. This is a nice usability win
and also reclaims an invariant that at most one resource with a given
URN is live and at most one is pending deletion at any point in time.
* Rebase against master
* Fix a test issue arising from shared snapshots
* CR feedback
* plan -> replacement
* Use ephemeral statuses to communicate deletions
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
If a resource's options bag does not specify `protect` or `provider`,
pull a default value from the resource's parent.
In order to allow a parent resource to specify providers for multiple
resource types, component resources now accept an optional map from
package name to provider instance. When a custom resource needs a
default provider from its parent, it checks its parent provider bag for
an entry under its package. If a component resource does not have a
provider bag, its pulls a default from its parent.
These changes also add a `parent` field to `InvokeOptions` s.t. calls to
invoke can use the same behavior as resource creation w.r.t. providers.
Fixes#1735, #1736.
The belief is that this hides some complexity that we shouldn't be
exposing in the default case.
In order to filter these events from both the diff/progress display
and the resource change summary, we perform this filtering in
`pkg/engine`.
Fixes#1733.
This is consistent with the behavior prior to the introduction of Read
steps. In order to avoid a breaking change we must do this check in the
engine itself, which causes a bit of a layering violation: because IDs
are marshaled as raw strings rather than PropertyValues, the engine must
check against the marshaled form of an unknown directly (i.e.
`plugin.UnknownStringValue`).
When calculating deletes, we will only issue a single delete step for a
particular URN. This is incorrect in the presence of pending deletes
that share URNs with a live resource if the pending deletes follow the
live resource in the checkpoint: instead of issuing a delete for
every resource with a particular URN, we will only issue deletes for
the pending deletes.
Before first-class providers, this was mostly benigin: any remaining
resources could be deleted by re-running the destroy. With the
first-class provider changes, however, the provider for the undeleted
resources will be deleted, leaving the checkpoint in an invalid state.
These changes fix this issue by allowing the step generator to issue
multiple deletes for a single URN and add a test for this scenario.
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
Set the following compiler defaults:
```
"target": "es6",
"module": "commonjs",
"moduleResolution": "node",
"sourceMap": true,
```
Which allows us to not even include a tsconfig.json file. If one is
present, `ts-node` will use its options, but the above settings will
override any settings in a local tsconfig.json file. This means if you
want full control over the target, you'll need to go back to the raw
tsc workflow where you explicitly build ahead of time.
We retain a few tests on the RunBuild plan, with `typescript` set to
false in the runtime options, but for the general case, we remove the
build steps and custom entry points for our programs.
This change lets us set runtime specific options in Pulumi.yaml, which
will flow as arguments to the language hosts. We then teach the nodejs
host that when the `typescript` is set to `true` that it should load
ts-node before calling into user code. This allows using typescript
natively without an explicit compile step outside of Pulumi.
This works even when a tsconfig.json file is not present in the
application and should provide a nicer inner loop for folks writing
typescript (I'm pretty sure everyone has run into the "but I fixed
that bug! Why isn't it getting picked up? Oh, I forgot to run tsc"
problem.
Fixes#958
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
When a resource fails to initialize (i.e., it is successfully created,
but fails to transition to a fully-initialized state), and a user
subsequently runs `pulumi update` without changing that resource, our
CLI will fail to warn the user that this resource is not initialized.
This commit begins the process of allowing our CLI to report this by
storing a list of initialization errors in the checkpoint.
* Work around a potentially bad assert in the engine
The engine asserts if presented with a plan that deletes the same URN
more than once. This has been empirically proven to be possible, so I am
removing the assert.
* CR: Add log for multiple pending-delete deletes
This commit adds CLI support for resource providers to provide partial
state upon failure. For resource providers that model resource
operations across multiple API calls, the Provider RPC interface can now
accomodate saving bags of state for resource operations that failed.
This is a common pattern for Terraform-backed providers that try to do
post-creation steps on resource as part of Create or Update resource
operations.
* Delete Before Create
This commit implements the full semantics of delete before create. If a
resource is replaced and requires deletion before creation, the engine
will use the dependency graph saved in the snapshot to delete all
resources that depend on the resource being replaced prior to the
deletion of the resource to be replaced.
* Rebase against master
* CR: Simplify the control flow in makeRegisterResourceSteps
* Run Check on new inputs when re-creating a resource
* Fix an issue where the planner emitted benign but incorrect deletes of DBR-deleted resources
* CR: produce the list of dependent resources in dependency order and iterate over the list in reverse
* CR: deps->dependents, fix an issue with DependingOn where duplicate nodes could be added to the dependent set
* CR: Fix an issue where we were considering old defaults and new inputs
inappropriately when re-creating a deleted resource
* CR: save 'iter.deletes[urn]' as a local, iterate starting at cursorIndex + 1 for dependency graph
This changes the CLI interface in a few ways:
* `pulumi preview` is back! The alternative of saying
`pulumi update --preview` just felt awkward, and it's a common
operation to want to perform. Let's just make it work.
* There are two flags consistent across all update commands,
`update`, `refresh`, and `destroy`:
- `--skip-preview` will skip the preview step. Note that this
does *not* skip the prompt to confirm that you'd like to proceed.
Indeed, it will still prompt, with a little warning text about
the fact that the preview has been skipped.
* `--yes` will auto-approve the updates.
This lands us in a simpler and more intuitive spot for common scenarios.
I found the flag --force to be a strange name for skipping a preview,
since that name is usually reserved for operations that might be harmful
and yet you're coercing a tool to do it anyway, knowing there's a chance
you're going to shoot yourself in the foot.
I also found that what I almost always want in the situation where
--force was being used is to actually just run a preview and have the
confirmation auto-accepted. Going straight to --force isn't the right
thing in a CI scenario, where you actually want to run a preview first,
just to ensure there aren't any issues, before doing the update.
In a sense, there are four options here:
1. Run a preview, ask for confirmation, then do an update (the default).
2. Run a preview, auto-accept, and then do an update (the CI scenario).
3. Just run a preview with neither a confirmation nor an update (dry run).
4. Just do an update, without performing a preview beforehand (rare).
This change enables all four workflows in our CLI.
Rather than have an explosion of flags, we have a single flag,
--preview, which can specify the mode that we're operating in. The
following are the values which correlate to the above four modes:
1. "": default (no --preview specified)
2. "auto": auto-accept preview confirmation
3. "only": only run a preview, don't confirm or update
4. "skip": skip the preview altogether
As part of this change, I redid a bit of how the preview modes
were specified. Rather than booleans, which had some illegal
combinations, this change introduces a new enum type. Furthermore,
because the engine is wholly ignorant of these flags -- and only the
backend understands them -- it was confusing to me that
engine.UpdateOptions stored this flag, especially given that all
interesting engine options _also_ accepted a dryRun boolean. As of
this change, the backend.PreviewBehavior controls the preview options.
To prepare for a world where stack names must be unique across an
owner, add some randomness to the names we use for stacks as part of
our integration tests.
This change removes the need to `pulumi init` when targeting the local
backend. A fair amount of the change lays the foundation that the next
set of changes to stop having `pulumi init` be used for cloud stacks
as well.
Previously, `pulumi init` logically did two things:
1. It created the bookkeeping directory for local stacks, this was
stored in `<repository-root>/.pulumi`, where `<repository-root>` was
the path to what we belived the "root" of your project was. In the
case of git repositories, this was the directory that contained your
`.git` folder.
2. It recorded repository information in
`<repository-root>/.pulumi/repository.json`. This was used by the
cloud backend when computing what project to interact with on
Pulumi.com
The new identity model will remove the need for (2), since we only
need an owner and stack name to fully qualify a stack on
pulumi.com, so it's easy enough to stop creating a folder just for
that.
However, for the local backend, we need to continue to retain some
information about stacks (e.g. checkpoints, history, etc). In
addition, we need to store our workspace settings (which today just
contains the selected stack) somehere.
For state stored by the local backend, we change the URL scheme from
`local://` to `local://<optional-root-path>`. When
`<optional-root-path>` is unset, it defaults to `$HOME`. We create our
`.pulumi` folder in that directory. This is important because stack
names now must be unique within the backend, but we have some tests
using local stacks which use fixed stack names, so each integration
test really wants its own "view" of the world.
For the workspace settings, we introduce a new `workspaces` directory
in `~/.pulumi`. In this folder we write the workspace settings file
for each project. The file name is the name of the project, combined
with the SHA1 of the path of the project file on disk, to ensure that
multiple pulumi programs with the same project name have different
workspace settings.
This does mean that moving a project's location on disk will cause the
CLI to "forget" what the selected stack was, which is unfortunate, but
not the end of the world. If this ends up being a big pain point, we
can certianly try to play games in the future (for example, if we saw
a .git folder in a parent folder, we could store data in there).
With respect to compatibility, we don't attempt to migrate older files
to their newer locations. For long lived stacks managed using the
local backend, we can provide information on where to move things
to. For all stacks (regardless of backend) we'll require the user to
`pulumi stack select` their stack again, but that seems like the
correct trade-off vs writing complicated upgrade code.
Our normal lifecycle tests always call pulumi stack rm, but some of
the tests that used the more barebones framework did not do so. This
was "ok" in the past, since all bookkeeping data about a stack was
stored next to the Pulumi program itself and we deleted that folder
once the test passed.
As part of removing `pulumi init` workspace tracking will move to
~/.pulumi/workspaces and so we'd like to have a gesture that actually
removes the stack, which will cause the workspace file to be removed
as well, instead of littering ~/.pulumi/workspaces with tests.
Upcoming work to remove the need for `pulumi init` makes testing the
upgrade code much harder than it did in the past (since workspace data
is moving to a different location on the file system, as well as some
other changes).
Instead of trying to maintain the code and test, let's just remove
it. Folks who haven't migrated (LM and the PPC deployment in the
service) should use the 0.11.3 or earlier CLI to migrate their
projects (simply by logging in and running a pulumi command) or move
things forward by hand.
In cases where we are running against a local service, the CLI does
not print a Permalink line when updating a stack, because we can not
determine what the URL for the link would be. This breaks the diff
tests which need to clean the CLI output and compare them to known
values, since the output now has one less line than expected.
Update the test's cleaning logic to handle this case.
* Lift snapshot management out of the engine
This PR is a prerequisite for parallelism by addressing a major problem
that the engine has to deal with when performing parallel resource
construction: parallel mutation of the global snapshot. This PR adds
a `SnapshotManager` type that is responsible for maintaining and
persisting the current resource snapshot. It serializes all reads and
writes to the global snapshot and persists the snapshot to persistent
storage upon every write.
As a side-effect of this, the core engine no longer needs to know about
snapshot management at all; all snapshot operations can be handled as
callbacks on deployment events. This will greatly simplify the
parallelization of the core engine.
Worth noting is that the core engine will still need to be able to read
the current snapshot, since it is interested in the dependency graphs
contained within. The full implications of that are out of scope of this
PR.
Remove dead code, Steps no longer need a reference to the plan iterator that created them
Fixing various issues that arise when bringing up pulumi-aws
Line length broke the build
Code review: remove dead field, fix yaml name error
Rebase against master, provide implementation of StackPersister for cloud backend
Code review feedback: comments on MutationStatus, style in snapshot.go
Code review feedback: move SnapshotManager to pkg/backend, change engine to use an interface SnapshotManager
Code review feedback: use a channel for synchronization
Add a comment and a new test
* Maintain two checkpoints, an immutable base and a mutable delta, and
periodically merge the two to produce snapshots
* Add a lot of tests - covers all of the non-error paths of BeginMutation and End
* Fix a test resource provider
* Add a few tests, fix a few issues
* Rebase against master, fixed merge
This change does three major things:
1. Removes the ability to be logged into multiple clouds at the same
time. Previously, we supported being logged into multiple clouds at
the same time and the CLI would fan out requests and join responses
when needed. In general, this was only useful for Pulumi employees
that wanted run against multiple copies of the service (say production
and staging) but overall was very confusing (for example in the old
world a stack with the same identity could appear twice (since it was
in two backends) which the CLI didn't handle very well).
2. Stops treating the "local" backend as a special thing, from the
point of view of the CLI. Previouly we'd always connect to the local
backend and merge that data with whatever was in clouds we were
connected to. We had gestures like `--local` in `pulumi stack init`
that meant "use the local mode". Instead, to use the local mode now
you run `pulumi login --cloud-url local://` and then you are logged in
the local backend. Since you can only ever be logged into a single
backend, we can remove the `--local` and `--remote` flags from `pulumi
stack init`, it just now requires you to be logged in and creates a
stack in whatever back end you were logged into. When logging into the
local backend, you are not prompted for an access key.
3. Prompt for login in places where you have to log in, if you are not
already logged in.
Tests now target managed stacks instead of local stacks.
The existing logged in user and target backend API are used unless PULUMI_ACCES_TOKEN is defined, in which case tests are run under that access token and against the PULUMI_API backend.
For developer machines, we will now need to be logged in to Pulumi to run tests, and whichever default API backend is logged in (the one listed as current in ~/.pulumi/credentials.json) will be used. If you need to override these, provide PULUMI_ACCESS_TOKEN and possibly PULUMI_API.
For Travis, we currently target the staging service using the Pulumi Bot user.
We have decided to run tests in the pulumi organization. This can be overridden for local testing (or in Travis in the future) by defining PULUMI_API_OWNER_ORGANIZATION and using an access token with access to that organization.
Part of pulumi/home#195.
Also, rename/cleanup a bunch of serialization code.
Also, generate better environment names in the serialized closure code. Thsi code should be much easier to make sense of as hte names will better track to the original names in the user code.
Also, dedupe simple non-capturing functions. This helps ensure we don't spit out N copies of __awaiter (one per file it is declared in).
config.Key has become a pair of namespace and name. Because the whole
world has not changed yet, there continues to be a way to convert
between a tokens.ModuleMember and config.Key, however now sometime the
conversion from tokens.ModuleMember can fail (when the module member
is not of the form `<package>:config:<name>`).
Right now, config.Key is a type alias for tokens.ModuleMember. I did a
pass over the codebase such that we use config.Key everywhere it
looked like the value did not leak to some external process (e.g a
resource provider or a langhost).
Doing this makes it a little clearer (hopefully) where code is
depending on a module member structure (e.g. <package>:config:<value>)
instead of just an opaque type.
Make many fixes to closure serialization
Primary things that i've done as part of this change:
Added support for cyclic objects.
Properly serialize objects that are shared across different function. previously you would get multiple copies, now you properly reference the same copy.
Remove the usages of 'hashes' for functions. Because we track identity of objects, we no longer need them.
Serialize properties of functions (if they have any).
Handle Objects/Functions with different __proto__s than normal. i.e. classes/constructors. but also anything the user may have done themselves to the object.
Handle generator functions.
Handle functions with 'computed' names.
Handle functions with 'symbol' names.
Handle serializing Promises as Promises.
Removed the dual Closure/AsyncClosure tree. One existed solely so we could have a tree without promises (for use in testing maybe?). Because this all exists in a part of our codebase that is entirely async, it's fine to have promises in the tree, and to await them when serializing the Closure to a string.
Handle serializing class-constructors and methods. Including properly handling 'super' calls.
Migrate configuration from the old model to the new model. The
strategy here is that when we first run `pulumi` we enumerate all of
the stacks from all of the backends we know about and for each stack
get the configuration values from the project and workspace and
promote them into the new file. As we do this, we remove stack
specific config from the workspace and Pulumi.yaml file.
If we are able to upgrade all the stacks we know about, we delete all
global configuration data in the workspace and in Pulumi.yaml as well.
We have a test that ensures upgrades continue to work.
This change updates our configuration model to make it simpler to
understand by removing some features and changing how things are
persisted in files.
Notable changes:
- We've removed the notion of "workspace" vs "project"
config. Now, configuration is always stored in a file next to
`Pulumi.yaml` named `Pulumi.<stack-name>.yaml` (the same file we'd
use for an other stack specific information we would need to persist
in the future).
- We've removed the notion of project wide configuration. Every new
stack gets a completely empty set of configuration and there's no
way to share common values across stacks, instead the common value
has to be set on each stack.
We retain some of the old code for the configuration system so we can
support upgrading a project in place. That will happen with the next
change.
This change fixes some issues and allows us to close some
others (since they are no longer possible).
Fixes#866Closes#872Closes#731
We are going to be changing the configuration model. To begin, let's
take most of the existing stuff and mark it as "deprecated" so we can
keep the existing behavior (to help transition newer code forward)
while making it clear what APIs should not be called in the
implementation of `pulumi` itself.
Despite our good progress moving towards having an apitype package,
where our exchange types live and can be shared among the engine and
our services, there were a few major types that were still duplciated.
Resource was the biggest example -- and indeed, the apitype varirant
was missing the new Dependencies property -- but there were others,
like Manfiest, PluginInfo, etc. These too had semi-random omissions.
This change merges all of these types into the apitype package. This
not only cleans up the redundancy and missing properties, but will
"force the issue" with respect to keeping them in sync and properly
versioning the information in a backwards compatible way.
The resource/stack package still exists as a simple marshaling layer
to and from the engine's core data types.
Finally, I've made the controversial change to share the actual
Deployment data structure at the apitype layer also. This will force
us to confront differences in that data structure similarly, and will
allow us to leverage the strong typing throughout to catch issues.
This change gets enough of the Python SDK up and running that the
empty Python program will work. Mostly just scaffolding, but the
basic structure is now in place. The primary remaining work is to
wire up resource creation to the gRPC interfaces.
In summary:
* The basic structure is as follows:
- Everything goes into sdk/python/.
- sdk/python/cmd/pulumi-langhost-python is a Go language host
that simply knows how to spawn Python processes to run out
entrypoint in response to requests by the engine.
- sdk/python/cmd/pulumi-langhost-python-exec is a little Python
shim that is invoked by the language host to run Python programs,
and is responsible for setting up the minimal goo before we can
do so (RPC connections and the like).
- sdk/python/lib/ contains a Python Pip package suitable for PyPi.
- In there, we have two packages: the root pulumi package that
contains all of the basic Pulumi programming model abstractions,
and pulumi.runtime, which contains the implementation of
resource registration, RPC interfacing with the engine, and so on.
* Add logic in our test framework to conditionalize on the language
type and react accordingly. This will allow us to skip Yarn for
Python projects and eventually run Pip if there's a requirements.txt.
* Created the basic project structure, including all of the usual
Make targets for installing into the proper places.
* Building also runs Pylint and we are clean.
There are a few other minor things in here:
* Add an "empty" test for both Node.js and Python. These pass.
* Fix an existing bug in plugin shutdown logic. At some point, we
started waiting for stderr/stdout to flush before shutting down
the plugin; but if certain failures happen "early" during the
plugin launch process, these channels will never get initialized
and so waiting for them deadlocks.
* Recently we seem to have added logic to delete test temp
directories if a failure happened during initialization of said
temp directories. This is unfortunate, because you often need to
look at the temp directory to see what failed. We already clean
them up elsewhere after the full test completes successfully, so
I don't think we need to be doing this, and I've removed it.
Still many loose ends (config, resources, etc), but it's a start!
1. Various idiomatic Go and TypeScript fixes
2. Add an integration test that end-to-end roundtrips dependency
information for a simple Pulumi program
3. Add an additional test assert that tests that dependency information
comes from the language host as expected
This addresses pulumi/pulumi#446: what we used to call "package" is
now called "project". This has gotten more confusing over time, now
that we're doing real package management.
Also fixespulumi/pulumi#426, while in here.
In order to begin publishing our core SDK package to NPM, we will
need it to be underneath the @pulumi scope so that it may remain
private. Eventually, we can alias pulumi back to it.
This is part of pulumi/pulumi#915.
As it stands, we serialize more than is correct when registering
resources: in addition to serializing the RegisterResource RPC, we also
wait for input properties to resolve in the same context. Unfortunately,
this means that we can create cycles in the promise graph when a
resource A is constructed in an earlier turn than some resource B and
one of B's output properties is an input to resource A. These changes
fix this issue by allowing input properties to resolve *before*
serializing the RegisterResource RPC.
Some integration tests had taken a dependency on the ordering of resources in
either the output of the `pulumi` command or the checkpoint file. The
only test that took a dependency on command output was updated s.t. its
resources have exactly one legal topographical sort (and therefore their
ordering is deterministic). The other tests were updated s.t. their
validation did not depend on resource ordering.