This change introduces support for using the cloud backend when
`pulumi init` has not been run. When this is the case, we use the new
identity model, where a stack is referenced by an owner and a stack
name only.
There are a few things going on here:
- We add a new `--owner` flag to `pulumi stack init` that lets you
control what account a stack is created in.
- When listing stacks, we show stacks owned by you and any
organizations you are a member of. So, for example, I can do:
* `pulumi stack init my-great-stack`
* `pulumi stack init --owner pulumi my-great-stack`
To create a stack owned by my user and one owned by my
organization. When `pulumi stack ls` is run, you'll see both
stacks (since they are part of the same project).
- When spelling a stack on the CLI, an owner can be optionally
specified by prefixing the stack name with an owner name. For
example `my-great-stack` means the stack `my-great-stack` owned by
the current logged in user, where-as `pulumi/my-great-stack` would
be the stack owned by the `pulumi` organization
- `--all` can be passed to `pulumi stack ls` to see *all* stacks you
have access to, not just stacks tied to the current project.
Long term, a stack name alone will not be sufficent to address a
stack. Introduce a new `backend.StackReference` interface that allows
each backend to give an opaque stack reference that can be used across
operations.
When run without a `--plaintext` or `--secret` argument, `pulumi
config` warns that the value is stored unecrypted and that you can
pass `--secret` to encrypt it. Now, we also mention that `--plaintext`
can be pased explicity on the command line to avoid the warning.
Fixes#752
config.Key has become a pair of namespace and name. Because the whole
world has not changed yet, there continues to be a way to convert
between a tokens.ModuleMember and config.Key, however now sometime the
conversion from tokens.ModuleMember can fail (when the module member
is not of the form `<package>:config:<name>`).
Right now, config.Key is a type alias for tokens.ModuleMember. I did a
pass over the codebase such that we use config.Key everywhere it
looked like the value did not leak to some external process (e.g a
resource provider or a langhost).
Doing this makes it a little clearer (hopefully) where code is
depending on a module member structure (e.g. <package>:config:<value>)
instead of just an opaque type.
This change updates our configuration model to make it simpler to
understand by removing some features and changing how things are
persisted in files.
Notable changes:
- We've removed the notion of "workspace" vs "project"
config. Now, configuration is always stored in a file next to
`Pulumi.yaml` named `Pulumi.<stack-name>.yaml` (the same file we'd
use for an other stack specific information we would need to persist
in the future).
- We've removed the notion of project wide configuration. Every new
stack gets a completely empty set of configuration and there's no
way to share common values across stacks, instead the common value
has to be set on each stack.
We retain some of the old code for the configuration system so we can
support upgrading a project in place. That will happen with the next
change.
This change fixes some issues and allows us to close some
others (since they are no longer possible).
Fixes#866Closes#872Closes#731
We are going to be changing the configuration model. To begin, let's
take most of the existing stuff and mark it as "deprecated" so we can
keep the existing behavior (to help transition newer code forward)
while making it clear what APIs should not be called in the
implementation of `pulumi` itself.
This change includes a handful of stack-related CLI formatting
improvements that I've been noodling on in the background for a while,
based on things that tend to trip up demos and the inner loop workflow.
This includes:
* If `pulumi stack select` is run by itself, use an interactive
CLI menu to let the user select an existing stack, or choose to
create a new one. This looks as follows
$ pulumi stack select
Please choose a stack, or choose to create a new one:
abcdef
babblabblabble
> currentlyselected
defcon
<create a new stack>
and is navigated in the usual way (key up, down, enter).
* If a stack name is passed that does not exist, prompt the user
to ask whether s/he wants to create one on-demand. This hooks
interesting moments in time, like `pulumi stack select foo`,
and cuts down on the need to run additional commands.
* If a current stack is required, but none is currently selected,
then pop the same interactive menu shown above to select one.
Depending on the command being run, we may or may not show the
option to create a new stack (e.g., that doesn't make much sense
when you're running `pulumi destroy`, but might when you're
running `pulumi stack`). This again lets you do with a single
command what would have otherwise entailed an error with multiple
commands to recover from it.
* If you run `pulumi stack init` without any additional arguments,
we interactively prompt for the stack name. Before, we would
error and you'd then need to run `pulumi stack init <name>`.
* Colorize some things nicely; for example, now all prompts will
by default become bright white.
This addresses pulumi/pulumi#446: what we used to call "package" is
now called "project". This has gotten more confusing over time, now
that we're doing real package management.
Also fixespulumi/pulumi#426, while in here.
When reading a configuration value from standard in and standard in is
not connected to a terminal, read until EOF and then trim a trailing
newline (if present) to get the value
Fixes#822
In the Pulumi Cloud, there is no guarantee that two stacks will share
the same encryption key. This means that encrypted config can not be
shared across stacks (in the Pulumi.yaml) file. To mimic this behavior
in the local experience, we now use a unique key per stack.
When upgrading an existing project, for any stack with existing
secrets, we copy the existing key into this stack. Future stacks will
get thier own encryption key. This strikes a balance between
expediency of implementation, the end user UX and not having to make a
breaking change.
As part of this change, I have introduced a CHANGELOG.md file in the
root of the repository and added a small note about the change to it.
Fixes#769
Use the new {en,de}crypt endpoints in the Pulumi.com API to secure
secret config values. The ciphertext for a secret config value is bound
to the stack to which it applies and cannot be shared with other stacks
(e.g. by copy/pasting it around in Pulumi.yaml). All secrets will need
to be encrypted once per target stack.
This does three things:
* Use nice humanized times for update times, to avoid ridiculously
long timestamps consuming lots of horizontal space. Instead of
LAST UPDATE
2017-12-12 12:22:59.994163319 -0800 PST
we now see
LAST UPDATE
1 day ago
* Use the longest config key for the horizontal spacing when the key
exceeds the default alignment size. This avoids individual lines
wrapping in awkward ways.
* Do the same for stack names and output properties.
As articulated in #714, the way config defaults to workspace-local
configuration is a bit error prone, especially now with the cloud
workflow being the default. This change implements several improvements:
* First, --save defaults to true, so that configuration changes will
persist into your project file. If you want the old local workspace
behavior, you can specify --save=false.
* Second, the order in which we applied configuration was a little
strange, because workspace settings overwrote project settings.
The order is changed now so that we take most specific over least
specific configuration. Per-stack is considered more specific
than global and project settings are considered more specific
than workspace.
* We now warn anytime workspace local configuration is used. This
is a developer scenario and can have subtle effects. It is simply
not safe to use in a team environment. In fact, I lost an arm
this morning due to workspace config... and that's why you always
issue warnings for unsafe things.
Instead of unconditionally emitting a message when configuring
values, which is easy to miss, instead print out a more helpful
warning iff you are configuring a plaintext value that you are
also saving to your project.
This change implements some feedback from @ellismg.
* Make backend.Stack an interface and let backends implement it,
enabling dynamic type testing/casting to access information
specific to that backend. For instance, the cloud.Stack conveys
the cloud URL, org name, and PPC name, for each stack.
* Similarly expose specialized backend.Backend interfaces,
local.Backend and cloud.Backend, to convey specific information.
* Redo a bunch of the commands in terms of these.
* Keeping with this theme, turn the CreateStack options into an
opaque interface{}, and let the specific backends expose their
own structures with their own settings (like PPC name in cloud).
* Show both the org and PPC names in the cloud column printed in
the stack ls command, in addition to the Pulumi Cloud URL.
Unrelated, but useful:
* Special case the 401 HTTP response and make a friendly error,
to tell the developer they must use `pulumi login`. This is
better than tossing raw "401: Unauthorized" errors in their face.
* Change the "Updating stack '..' in the Pulumi Cloud" message to
use the correct action verb ("Previewing", "Destroying", etc).
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
Previously, we were inconsistent on how we handled argument validation
in the CLI. Many commands used cobra.Command's Args property to
provide a validator if they took arguments, but commands which did not
rarely used cobra.NoArgs to indicate this.
This change does two things:
1. Introduce `cmdutil.ArgsFunc` which works like `cmdutil.RunFunc`, it
wraps an existing cobra type and lets us control the behavior when an
arguments validator fails.
2. Ensure every command sets the Args property with an instance of
cmdutil.ArgsFunc. The cmdutil package defines wrapers for all the
cobra validators we are using, to prevent us from having to spell out
`cmduitl.ArgsFunc(...)` everywhere.
Fixes#588
This change brings back component outputs to the overall system again.
In doing so, it generally overhauls the way we do resource RPCs a bit:
* Instead of RegisterResource and CompleteResource, we call these
BeginRegisterResource and EndRegisterResource, which begins to model
these as effectively "asynchronous" resource requests. This should also
help with parallelism (https://github.com/pulumi/pulumi/issues/106).
* Flip the CLI/engine a little on its head. Rather than it driving the
planning and deployment process, we move more to a model where it
simply observes it. This is done by implementing an event handler
interface with three events: OnResourceStepPre, OnResourceStepPost,
and OnResourceComplete. The first two are invoked immediately before
and after any step operation, and the latter is invoked whenever a
EndRegisterResource comes in. The reason for the asymmetry here is
that the checkpointing logic in the deployment engine is largely
untouched (intentionally, as this is a sensitive part of the system),
and so the "begin"/"end" nature doesn't flow through faithfully.
* Also make the engine more event-oriented in its terminology and the
way it handles the incoming BeginRegisterResource and
EndRegisterResource events from the language host. This is the first
step down a long road of incrementally refactoring the engine to work
this way, a necessary prerequisite for parallelism.
A handful of UX improvments for config:
- `pulumi config ls` has been removed. Now, `pulumi config` with no
arguments prints the table of configuration values for a stack and
a new command `pulumi config get <key>` prints the value for a
single configuration key (useful for scripting).
- `pulumi config text` and `pulumi config secret` have been merged
into a single command `pulumi config set`. The flag `--secret` can
be used to encrypt the value we store (like `pulumi config secret`
used to do).
- To make it obvious that setting a value with `pulumi config set` is
in plan text, we now echo a message back to the user saying we
added the configuration value in plaintext.
Fixes#552
This code was swallowing an error incorrectly, rather than returning
it. As a result, certain commands would fail with assertions rather
than the intended error message (like trying to config without a stack).
Previously, we stored configuration information in the Pulumi.yaml
file. This was a change from the old model where configuration was
stored in a special section of the checkpoint file.
While doing things this way has some upsides with being able to flow
configuration changes with your source code (e.g. fixed values for a
production stack that version with the code) it caused some friction
for the local development scinerio. In this case, setting
configuration values would pend changes to Pulumi.yaml and if you
didn't want to publish these changes, you'd have to remember to remove
them before commiting. It also was problematic for our examples, where
it was not clear if we wanted to actually include values like
`aws:config:region` in our samples. Finally, we found that for our
own pulumi service, we'd have values that would differ across each
individual dev stack, and publishing these values to a global
Pulumi.yaml file would just be adding noise to things.
We now adopt a hybrid model, where by default configuration is stored
locally, in the workspace's settings per project. A new flag `--save`
tests commands to actual operate on the configuration information
stored in Pulumi.yaml.
With the following change, we have have four "slots" configuration
values can end up in:
1. In the Pulumi.yaml file, applies to all stacks
2. In the Pulumi.yaml file, applied to a specific stack
3. In the local workspace.json file, applied to all stacks
4. In the local workspace.json file, applied to a specific stack
When computing the configuration information for a stack, we apply
configuration in the above order, overriding values as we go
along.
We also invert the default behavior of the `pulumi config` commands so
they operate on a specific stack (i.e. how they did before
e3610989). If you want to apply configuration to all stacks, `--all`
can be passed to any configuration command.
- `pulumi config ls` now does not prompt for a passphrase if there are
secrets, instead ******'s are shown. `--show-secrets` can be passed
to force decryption. The behavior of `pulumi config ls <key>` is
unchanged, if the key is secure, we will prompt for a passphrase.
- `pulumi config secret <key>` now prompts for the passphrase and verifies
it before asking for the secret value.
Fixes#465
We now encrypt secrets at rest based on a key derived from a user
suplied passphrase.
The system is designed in a way such that we should be able to have a
different decrypter (either using a local key or some remote service
in the Pulumi.com case in the future).
Care is taken to ensure that we do not leak decrypted secrets into the
"info" section of the checkpoint file (since we currently store the
config there).
In addtion, secrets are "pay for play", a passphrase is only needed
when dealing with a value that's encrypted. If secure config values
are not used, `pulumi` will never prompt you for a
passphrase. Otherwise, we only prompt if we know we are going to need
to decrypt the value. For example, `pulumi config <key>` only prompts
if `<key>` is encrypted and `pulumi deploy` and friends only prompt if
you are targeting a stack that has secure configuration assoicated
with it.
Secure values show up as unecrypted config values inside the language
hosts and providers.
Previously, config information was stored per stack. With this change,
we now allow config values which apply to every stack a program may
target.
When passed without the `-s <stack>` argument, `pulumi config`
operates on the "global" configuration. Stack specific information can
be modified by passing an explicit stack.
Stack specific configuration overwrites global configuration.
Conside the following Pulumi.yaml:
```
name: hello-world
runtime: nodejs
description: a hello world program
config:
hello-world:config:message Hello, from Pulumi
stacks:
production:
config:
hello-world:config:message Hello, from Production
```
This program contains a single configuration value,
"hello-world:config:message" which has the value "Hello, from Pulumi"
when the program is activated into any stack except for "production"
where the value is "Hello, from Production".
Instead of having information stored in the checkpoint file, save it
in the Pulumi.yaml file. We introduce a new section `stacks` which
holds information specific to a stack.
Next, we'll support adding configuration information that applies
to *all* stacks for a Program and allow the stack specific config to
overwrite or augment it.
Previously, you had to fully qualify configuration values (e.g
example:config:message). As a convience, let's support adding
configuration values where the key is not a fully qualified module
member. In this case, we'll treat the key as if
`<program-name>:config:` had been prepended to it.
In addition, when we print config, shorten keys of the form
`<program-name>:config:<key-name>` to `<key-name>`.
I've updated one integration test to use the new syntax and left the
other as is to ensure both continue to work.
Previously we used the word "Environment" as the term for a deployment
target, but since then we've started to use the term Stack. Adopt this
across the CLI.
From a user's point of view, there are a few changes:
1. The `env` verb has been renamed to `stack`
2. The `-e` and `--env` options to commands which operate on an
environment now take `-s` or `--stack` instead.
3. Becase of (2), the commands that used `-s` to display a summary now
only support passing the full option name (`--summary`).
On the local file system, we still store checkpoint data in the `env`
sub-folder under `.pulumi` (so we can reuse existing checkpoint files
that were written to the old folder)
Previously, the engine was concered with maintaing information about
the currently active environment. Now, the CLI is in charge of
this. As part of this change, the engine can now assume that every
environment has a non empty name (and I've added asserts on the
entrypoints of the engine API to ensure that any consumer of the
engine passes a non empty environment name)
