PPCs are no longer a central concept to our model, but instead a
feature that that pulumi.com provides to some organizations. Let's
remove most mentions of PPCs except for cases where we really need to
talk about them (e.g. when a stack is actually hosted in a PPC instead
of just via the normal pulumi.com service)
Also remove some "in the Pulumi Cloud" messages from the CLI, as using
the Pulumi Cloud is now the only real way to use pulumi.
Fixespulumi/pulumi-service#1117
This change introduces support for using the cloud backend when
`pulumi init` has not been run. When this is the case, we use the new
identity model, where a stack is referenced by an owner and a stack
name only.
There are a few things going on here:
- We add a new `--owner` flag to `pulumi stack init` that lets you
control what account a stack is created in.
- When listing stacks, we show stacks owned by you and any
organizations you are a member of. So, for example, I can do:
* `pulumi stack init my-great-stack`
* `pulumi stack init --owner pulumi my-great-stack`
To create a stack owned by my user and one owned by my
organization. When `pulumi stack ls` is run, you'll see both
stacks (since they are part of the same project).
- When spelling a stack on the CLI, an owner can be optionally
specified by prefixing the stack name with an owner name. For
example `my-great-stack` means the stack `my-great-stack` owned by
the current logged in user, where-as `pulumi/my-great-stack` would
be the stack owned by the `pulumi` organization
- `--all` can be passed to `pulumi stack ls` to see *all* stacks you
have access to, not just stacks tied to the current project.
Long term, a stack name alone will not be sufficent to address a
stack. Introduce a new `backend.StackReference` interface that allows
each backend to give an opaque stack reference that can be used across
operations.
This change does three major things:
1. Removes the ability to be logged into multiple clouds at the same
time. Previously, we supported being logged into multiple clouds at
the same time and the CLI would fan out requests and join responses
when needed. In general, this was only useful for Pulumi employees
that wanted run against multiple copies of the service (say production
and staging) but overall was very confusing (for example in the old
world a stack with the same identity could appear twice (since it was
in two backends) which the CLI didn't handle very well).
2. Stops treating the "local" backend as a special thing, from the
point of view of the CLI. Previouly we'd always connect to the local
backend and merge that data with whatever was in clouds we were
connected to. We had gestures like `--local` in `pulumi stack init`
that meant "use the local mode". Instead, to use the local mode now
you run `pulumi login --cloud-url local://` and then you are logged in
the local backend. Since you can only ever be logged into a single
backend, we can remove the `--local` and `--remote` flags from `pulumi
stack init`, it just now requires you to be logged in and creates a
stack in whatever back end you were logged into. When logging into the
local backend, you are not prompted for an access key.
3. Prompt for login in places where you have to log in, if you are not
already logged in.
This addresses pulumi/pulumi#446: what we used to call "package" is
now called "project". This has gotten more confusing over time, now
that we're doing real package management.
Also fixespulumi/pulumi#426, while in here.
This does three things:
* Use nice humanized times for update times, to avoid ridiculously
long timestamps consuming lots of horizontal space. Instead of
LAST UPDATE
2017-12-12 12:22:59.994163319 -0800 PST
we now see
LAST UPDATE
1 day ago
* Use the longest config key for the horizontal spacing when the key
exceeds the default alignment size. This avoids individual lines
wrapping in awkward ways.
* Do the same for stack names and output properties.
This change implements some feedback from @ellismg.
* Make backend.Stack an interface and let backends implement it,
enabling dynamic type testing/casting to access information
specific to that backend. For instance, the cloud.Stack conveys
the cloud URL, org name, and PPC name, for each stack.
* Similarly expose specialized backend.Backend interfaces,
local.Backend and cloud.Backend, to convey specific information.
* Redo a bunch of the commands in terms of these.
* Keeping with this theme, turn the CreateStack options into an
opaque interface{}, and let the specific backends expose their
own structures with their own settings (like PPC name in cloud).
* Show both the org and PPC names in the cloud column printed in
the stack ls command, in addition to the Pulumi Cloud URL.
Unrelated, but useful:
* Special case the 401 HTTP response and make a friendly error,
to tell the developer they must use `pulumi login`. This is
better than tossing raw "401: Unauthorized" errors in their face.
* Change the "Updating stack '..' in the Pulumi Cloud" message to
use the correct action verb ("Previewing", "Destroying", etc).
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
Previously, we were inconsistent on how we handled argument validation
in the CLI. Many commands used cobra.Command's Args property to
provide a validator if they took arguments, but commands which did not
rarely used cobra.NoArgs to indicate this.
This change does two things:
1. Introduce `cmdutil.ArgsFunc` which works like `cmdutil.RunFunc`, it
wraps an existing cobra type and lets us control the behavior when an
arguments validator fails.
2. Ensure every command sets the Args property with an instance of
cmdutil.ArgsFunc. The cmdutil package defines wrapers for all the
cobra validators we are using, to prevent us from having to spell out
`cmduitl.ArgsFunc(...)` everywhere.
Fixes#588
This change introduces an abstraction for a `backend` which manages
the implementation of some CLI commands. As part of defining the
interface, we introduce a new local backend implementation that just
uses data local to the machine.
This will let us share argument parsing and some display information
between the local case and the pulumi.com case in the CLI. We can
continue to refine this interface over time (e.g. today we have the
implementation of the Destroy/Update/Preview actually writing output
but instead they should be returning strongly typed data that the CLI
knows how to display and is unified across Pulumi.com deploys and
local deploys).
But this is a good first step.
Now, instead of having a .pulumi folder next to each project, we have
a single .pulumi folder in the root of the repository. This is created
by running `pulumi init`.
When run in a git repository, `pulumi init` will place the .pulumi
file next to the .git folder, so it can be shared across all projects
in a repository. When not in a git repository, it will be created in
the current working directory.
We also start tracking information about the repository itself, in a
new `repo.json` file stored in the root of the .pulumi folder. The
information we track are "owner" and "name" which map to information
we use on pulumi.com.
When run in a git repository with a remote named origin pointing to a
GitHub project, we compute the owner and name by deconstructing
information from the remote's URL. Otherwise, we just use the current
user's username and the name of the current working directory as the
owner and name, respectively.
We now encrypt secrets at rest based on a key derived from a user
suplied passphrase.
The system is designed in a way such that we should be able to have a
different decrypter (either using a local key or some remote service
in the Pulumi.com case in the future).
Care is taken to ensure that we do not leak decrypted secrets into the
"info" section of the checkpoint file (since we currently store the
config there).
In addtion, secrets are "pay for play", a passphrase is only needed
when dealing with a value that's encrypted. If secure config values
are not used, `pulumi` will never prompt you for a
passphrase. Otherwise, we only prompt if we know we are going to need
to decrypt the value. For example, `pulumi config <key>` only prompts
if `<key>` is encrypted and `pulumi deploy` and friends only prompt if
you are targeting a stack that has secure configuration assoicated
with it.
Secure values show up as unecrypted config values inside the language
hosts and providers.
Previously we used the word "Environment" as the term for a deployment
target, but since then we've started to use the term Stack. Adopt this
across the CLI.
From a user's point of view, there are a few changes:
1. The `env` verb has been renamed to `stack`
2. The `-e` and `--env` options to commands which operate on an
environment now take `-s` or `--stack` instead.
3. Becase of (2), the commands that used `-s` to display a summary now
only support passing the full option name (`--summary`).
On the local file system, we still store checkpoint data in the `env`
sub-folder under `.pulumi` (so we can reuse existing checkpoint files
that were written to the old folder)
