As it stands, we serialize more than is correct when registering
resources: in addition to serializing the RegisterResource RPC, we also
wait for input properties to resolve in the same context. Unfortunately,
this means that we can create cycles in the promise graph when a
resource A is constructed in an earlier turn than some resource B and
one of B's output properties is an input to resource A. These changes
fix this issue by allowing input properties to resolve *before*
serializing the RegisterResource RPC.
Some integration tests had taken a dependency on the ordering of resources in
either the output of the `pulumi` command or the checkpoint file. The
only test that took a dependency on command output was updated s.t. its
resources have exactly one legal topographical sort (and therefore their
ordering is deterministic). The other tests were updated s.t. their
validation did not depend on resource ordering.
It was possiblef for the finally for a stack to complete before all
other resources had been created. In this case, we would put these new
resources at top level, instead of having them as children of the
stack resource.
Since we do not use the langhost across stacks, we can simply set the
stack resource at top level and never remove it.
Fixes#818
This will allow us to remove a lot of current boilerplate in individual tests, and move it into the test harness.
Note that this will require updating users of the integration test framework. By moving to a property bag of inputs, we should avoid needing future breaking changes to this API though.
* Take an options pointer so values can change as a test runs.
* Don't pass redundant information.
* Extract initialization routine.
* Fix caller.
* Check return value.
* Extract destruction logic.
* Move preview and update into their own function.
* Inline null check.
* Revert "Make sure we properly update dir so that pulumi-destroy works."
This reverts commit 56bfc57998.
* Revert "Edits needs to continuously pass along the new directory. (#668)"
This reverts commit 8bd1822722.
* Revert "Refactor test code to make it simpler to validate code in the middle. (#662)"
This reverts commit ed65360157.
As documented in issue #616, the inputs/defaults/outputs model we have
today has fundamental problems. The crux of the issue is that our
current design requires that defaults present in the old state of a
resource are applied to the new inputs for that resource.
Unfortunately, it is not possible for the engine to decide which
defaults remain applicable and which do not; only the provider has that
knowledge.
These changes take a more tactical approach to resolving this issue than
that originally proposed in #616 that avoids breaking compatibility with
existing checkpoints. Rather than treating the Pulumi inputs as the
provider input properties for a resource, these inputs are first
translated by `Check`. In order to accommodate provider defaults that
were chosen for the old resource but should not change for the new,
`Check` now takes the old provider inputs as well as the new Pulumi
inputs. Rather than the Pulumi inputs and provider defaults, the
provider inputs returned by `Check` are recorded in the checkpoint file.
Put simply, these changes remove defaults as a first-class concept
(except inasmuch as is required to retain the ability to read old
checkpoint files) and move the responsibilty for manging and
merging defaults into the provider that supplies them.
Fixes#616.
When merging inputs and defaults in order to construct the set of inputs
for a call to `Create`, we must recursively merge each property value:
the provided defaults may contain nested values that must be present in
the merged result.
These changes introduce a new field, `Raw`, to `diag.Message`. This
field indicates that the contents of the message are not a format string
and should not be rendered via `Sprintf` during stringification.
The plugin std{out,err} readers have been updated to use raw messages,
and the event reader in `pulumi` has been fixed s.t. it does not format
event payloads before display.
Fixes#551.
Add the ability to upload data and timing for test runs to S3. Uploaded data is designed to be queried via a service like AWS Athena and these queries can then be imported into BI tools (Excel, QuickSight, PowerBI, etc.)
Initially hook this up to the `minimal` test as a baseline.
This adds a minimal runtime verification test to our basic
test suite, to at least exercise the portions of the integration
test library that load up and parse checkpoint files.
The `nodejs` language support is implemented as two programs: one that
manages the initial connection to the engine and provides the language
serivce itself, and another that the language service invokes in order
to run a `nodejs` Pulumi program. The latter is responsible for running
the user's program and communicating its resource requests to the
engine. Currently, `run` effectively assumes that the user's program
will run synchronously from start to finish, and will disconnect from
the engine once the user's program has completed. This assumption breaks
if the user's program requires multiple turns of the event loop to
finish its root resource requests. For example, the following program
would fail to create its second resource because the engine will be
disconnected once it reaches its `await`:
```
(async () => {
let a = new Resource();
await somePromise();
let = new Resource();
})();
```
These changes fix this issue by disconnecting from the engine during
process shutdown rather than after the user's program has finished its
first turn through the event loop.
We now encrypt secrets at rest based on a key derived from a user
suplied passphrase.
The system is designed in a way such that we should be able to have a
different decrypter (either using a local key or some remote service
in the Pulumi.com case in the future).
Care is taken to ensure that we do not leak decrypted secrets into the
"info" section of the checkpoint file (since we currently store the
config there).
In addtion, secrets are "pay for play", a passphrase is only needed
when dealing with a value that's encrypted. If secure config values
are not used, `pulumi` will never prompt you for a
passphrase. Otherwise, we only prompt if we know we are going to need
to decrypt the value. For example, `pulumi config <key>` only prompts
if `<key>` is encrypted and `pulumi deploy` and friends only prompt if
you are targeting a stack that has secure configuration assoicated
with it.
Secure values show up as unecrypted config values inside the language
hosts and providers.
During the course of a `pulumi update`, it is possible for a resource to
become slated for deletion. In the case that this deletion is part of a
replacement, another resource with the same URN as the to-be-deleted
resource will have been created earlier. If the `update` fails after the
replacement resource is created but before the original resource has been
deleted, the snapshot must capture that the original resource still exists
and should be deleted in a future update without losing track of the order
in which the deletion must occur relative to other deletes. Currently, we
are unable to track this information because the our checkpoints require
that no two resources have the same URN.
To fix this, these changes introduce to the update engine the notion of a
resource that is pending deletion and change checkpoint serialization to
use an array of resources rather than a map. The meaning of the former is
straightforward: a resource that is pending deletion should be deleted
during the next update.
This is a fairly major breaking change to our checkpoint files, as the
map of resources is no more. Happily, though, it makes our checkpoint
files a bit more "obvious" to any tooling that might want to grovel
or rewrite them.
Fixes#432, #387.
A dynamic resource is a resource whose provider is implemented alongside
the resource itself. This provider may close over and use orther
resources in the implementation of its CRUD operations. The provider
itself must be stateless, as each CRUD operation for a particular
dynamic resource type may use an independent instance of the provider.
Changes to the definition of a resource's provider result in replacement
of the resource itself (rather than a simple update), as this allows the
old provider definition to delete the old resource and the new provider
definition to create an appropriate replacement.
Previously, you had to fully qualify configuration values (e.g
example:config:message). As a convience, let's support adding
configuration values where the key is not a fully qualified module
member. In this case, we'll treat the key as if
`<program-name>:config:` had been prepended to it.
In addition, when we print config, shorten keys of the form
`<program-name>:config:<key-name>` to `<key-name>`.
I've updated one integration test to use the new syntax and left the
other as is to ensure both continue to work.
This changes a few things about "components":
* Rename what was previously ExternalResource to CustomResource,
and all of the related fields and parameters that this implies.
This just seems like a much nicer and expected name for what
these represent. I realize I am stealing a name we had thought
about using elsewhere, but this seems like an appropriate use.
* Introduce ComponentResource, to make initializing resources
that merely aggregate other resources easier to do correctly.
* Add a withParent and parentScope concept to Resource, to make
allocating children less error-prone. Now there's no need to
explicitly adopt children as they are allocated; instead, any
children allocated as part of the withParent callback will
auto-parent to the resource provided. This is used by
ComponentResource's initialization function to make initialization
easier, including the distinction between inputs and outputs.
This change implements core support for "components" in the Pulumi
Fabric. This work is described further in pulumi/pulumi#340, where
we are still discussing some of the finer points.
In a nutshell, resources no longer imply external providers. It's
entirely possible to have a resource that logically represents
something but without having a physical manifestation that needs to
be tracked and managed by our typical CRUD operations.
For example, the aws/serverless/Function helper is one such type.
It aggregates Lambda-related resources and exposes a nice interface.
All of the Pulumi Cloud Framework resources are also examples.
To indicate that a resource does participate in the usual CRUD resource
provider, it simply derives from ExternalResource instead of Resource.
All resources now have the ability to adopt children. This is purely
a metadata/tagging thing, and will help us roll up displays, provide
attribution to the developer, and even hide aspects of the resource
graph as appropriate (e.g., when they are implementation details).
Our use of this capability is ultra limited right now; in fact, the
only place we display children is in the CLI output. For instance:
+ aws:serverless:Function: (create)
[urn=urn:pulumi:demo::serverless::aws:serverless:Function::mylambda]
=> urn:pulumi:demo::serverless::aws:iam/role:Role::mylambda-iamrole
=> urn:pulumi:demo::serverless::aws:iam/rolePolicyAttachment:RolePolicyAttachment::mylambda-iampolicy-0
=> urn:pulumi:demo::serverless::aws:lambda/function:Function::mylambda
The bit indicating whether a resource is external or not is tracked
in the resulting checkpoint file, along with any of its children.
* Remove the bitrotted and useless basic/abc/ test.
* No need for the basic/ subdirectory. Move minimal to the top.
* Update TypeScript to 2.5.3.
* Check in lockfiles to ensure repeatability in Travis tests.
This resource provider accepts a single configuration parameter, `testing:provider:module`, that is the path to a Javascript module that implements CRUD operations for a set of resource types. This allows e.g. a test case to provide its own implementation of these operations that may succeed or fail in interesting ways.
Fixes#338.
This includes a few changes:
* The repo name -- and hence the Go modules -- changes from pulumi-fabric to pulumi.
* The Node.js SDK package changes from @pulumi/pulumi-fabric to just pulumi.
* The CLI is renamed from lumi to pulumi.
This makes a few tweaks to get the integration tests passing:
* Add `runtime: nodejs` to the minimal example's `Lumi.yaml` file.
* Remove usage of `@lumi/lumirt { printf }` and just use `console.log`.
* Remove calls to `lumijs` in the integration test framework and
the minimal example's package.json. Instead, we just run
`yarn run build`, which itself internally just invokes `tsc`.
* Add package validation logic and eliminate the pkg/compiler/metadata
library, in favor of the simpler code in pkg/engine.
* Simplify the Node.js langhost plugin CLI, and simply take an
argument rather than requiring required and optional --flags.
* Use a default path of "." if the program path isn't provided. This
is a legal scenario if you've passed a pwd and just want to load
the package's default module ("./index.js" or whatever main says).
* Add an executable script, lumi-langhost-nodejs, that fires up the
`bin/cmd/langhost/index.js` file to serve the Node.js language plugin.
This change runs the examples integration tests for every test
run. They used to be split out because the AWS tests take so long,
but now those are in their own separate package. Running the
integration tests here more frequently will prevent breaking the
most basic Lumi CLI commands and capabilities.
We are renaming Lumi to Pulumi Fabric. This change simply renames the
pulumi/lumi repo to pulumi/pulumi-fabric, without the CLI tools and other
changes that will follow soon afterwards.
Generalizes Lumi program validation so that it can be applied
to integration testing for other packages (such as the
pulumi/lumi-platform package examples).
We need to provide higher level abstractions with the
ability to set additional properties on a Lambda Function
even when using the closure serialization support of
aws.serverless.Function.
Note that this is an API breaking change, and may require
updates in any other libraries dependent on this API.
Disable invocation of `lumi plan` during examples
integration testing, pending resolution of #276 to
support planning in the face of output properties.