Adds a new resource option to force replacement when certain properties report changes, even if the resource provider itself does not require a replacement.
Fixes#6753.
Co-authored-by: Levi Blackstone <levi@pulumi.com>
These changes add support for provider-side previews of create and
update operations, which allows resource providers to supply output
property values for resources that are being created or updated during a
preview.
If a plugin supports provider-side preview, its create/update methods
will be invoked during previews with the `preview` property set to true.
It is the responsibility of the provider to fill in any output
properties that are known before returning. It is a best practice for
providers to only fill in property values that are guaranteed to be
identical if the preview were instead an update (i.e. only those output
properties whose values can be conclusively determined without
actually performing the create/update operation should be populated).
Providers that support previews must accept unknown values in their
create and update methods.
If a plugin does not support provider-side preview, the inputs to a
create or update operation will be propagated to the outputs as they are
today.
Fixes#4992.
After importing some resources, and running a second update with the
import still applied, an unexpected replace would occur. This wouldn't
happen for the vast majority of resources, but for some it would.
It turns out that the resources that trigger this are ones that use a
different format of identifier for the import input than they do for the
ID property.
Before this change, we would trigger an import-replacement when an
existing resource's ID property didn't match the import property, which
would be the case for the small set of resources where the input
identifier is different than the ID property.
To avoid this, we now store the `importID` in the statefile, and
compare that to the import property instead of comparing the ID.
* Make `async:true` the default for `invoke` calls (#3750)
* Switch away from native grpc impl. (#3728)
* Remove usage of the 'deasync' library from @pulumi/pulumi. (#3752)
* Only retry as long as we get unavailable back. Anything else continues. (#3769)
* Handle all errors for now. (#3781)
* Do not assume --yes was present when using pulumi in non-interactive mode (#3793)
* Upgrade all paths for sdk and pkg to v2
* Backport C# invoke classes and other recent gen changes (#4288)
Adjust C# generation
* Replace IDeployment with a sealed class (#4318)
Replace IDeployment with a sealed class
* .NET: default to args subtype rather than Args.Empty (#4320)
* Adding system namespace for Dotnet code gen
This is required for using Obsolute attributes for deprecations
```
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'ObsoleteAttribute' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'Obsolete' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
```
* Fix the nullability of config type properties in C# codegen (#4379)
With these changes, a user may explicitly set `deleteBeforeReplace` to
`false` in order to disable DBR behavior for a particular resource. This
is the SDK + CLI escape hatch for cases where the changes in
https://github.com/pulumi/pulumi-terraform/pull/465 cause undesirable
behavior.
Most of these options are typically left unset. In order to make it
easier to update the lifecycle test when adding new options, collect
them in a bag s.t. most callsites can go without being updated.
* Plumbing the custom timeouts from the engine to the providers
* Plumbing the CustomTimeouts through to the engine and adding test to show this
* Change the provider proto to include individual timeouts
* Plumbing the CustomTimeouts from the engine through to the Provider RPC interface
* Change how the CustomTimeouts are sent across RPC
These errors were spotted in testing. We can now see that the timeout
information is arriving in the RegisterResourceRequest
```
req=&pulumirpc.RegisterResourceRequest{
Type: "aws:s3/bucket:Bucket",
Name: "my-bucket",
Parent: "urn:pulumi:dev::aws-vpc::pulumi:pulumi:Stack::aws-vpc-dev",
Custom: true,
Object: &structpb.Struct{},
Protect: false,
Dependencies: nil,
Provider: "",
PropertyDependencies: {},
DeleteBeforeReplace: false,
Version: "",
IgnoreChanges: nil,
AcceptSecrets: true,
AdditionalSecretOutputs: nil,
Aliases: nil,
CustomTimeouts: &pulumirpc.RegisterResourceRequest_CustomTimeouts{
Create: 300,
Update: 400,
Delete: 500,
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
},
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
}
```
* Changing the design to use strings
* CHANGELOG entry to include the CustomTimeouts work
* Changing custom timeouts to be passed around the engine as converted value
We don't want to pass around strings - the user can provide it but we want
to make the engine aware of the timeout in seconds as a float64
A resource can be imported by setting the `import` property in the
resource options bag when instantiating a resource. In order to
successfully import a resource, its desired configuration (i.e. its
inputs) must not differ from its actual configuration (i.e. its state)
as calculated by the resource's provider.
There are a few interesting state transitions hiding here when importing
a resource:
1. No prior resource exists in the checkpoint file. In this case, the
resource is simply imported.
2. An external resource exists in the checkpoint file. In this case, the
resource is imported and the old external state is discarded.
3. A non-external resource exists in the checkpoint file and its ID is
different from the ID to import. In this case, the new resource is
imported and the old resource is deleted.
4. A non-external resource exists in the checkpoint file, but the ID is
the same as the ID to import. In this case, the import ID is ignored
and the resource is treated as it would be in all cases except for
changes that would replace the resource. In that case, the step
generator issues an error that indicates that the import ID should be
removed: were we to move forward with the replace, the new state of
the stack would fall under case (3), which is almost certainly not
what the user intends.
Fixes#1662.
Adds a new resource option `aliases` which can be used to rename a resource. When making a breaking change to the name or type of a resource or component, the old name can be added to the list of `aliases` for a resource to ensure that existing resources will be migrated to the new name instead of being deleted and replaced with the new named resource.
There are two key places this change is implemented.
The first is the step generator in the engine. When computing whether there is an old version of a registered resource, we now take into account the aliases specified on the registered resource. That is, we first look up the resource by its new URN in the old state, and then by any aliases provided (in order). This can allow the resource to be matched as a (potential) update to an existing resource with a different URN.
The second is the core `Resource` constructor in the JavaScript (and soon Python) SDKs. This change ensures that when a parent resource is aliased, that all children implicitly inherit corresponding aliases. It is similar to how many other resource options are "inherited" implicitly from the parent.
Four specific scenarios are explicitly tested as part of this PR:
1. Renaming a resource
2. Adopting a resource into a component (as the owner of both component and consumption codebases)
3. Renaming a component instance (as the owner of the consumption codebase without changes to the component)
4. Changing the type of a component (as the owner of the component codebase without changes to the consumption codebase)
4. Combining (1) and (3) to make both changes to a resource at the same time
Fixes#2277.
Adds a new ignoreChanges resource option that allows specifying a list of property names whose values will be ignored during updates. The property values will be used for Create, but will be ignored for purposes of updates, and as a result also cannot trigger replacements.
This is a feature of the Pulumi engine, not of the resource providers, so no new logic is needed in providers to support this feature. Instead, the engine simply replaces the values of input properties in the goal state with old inputs for properties marked as ignoreChanges.
Currently, only top level properties may be specified in ignoreChanges. In the future, this could be extended to support paths to nested properties (including into array elements) with a JSONPath/JMESPath syntax.
* Load specific provider versions if requested
As part of pulumi/pulumi#2389, we need the ability for language hosts to
tell the engine that a particular resource registration, read, or invoke
needs to use a particular version of a resource provider. This was not
previously possible before; the engine prior to this commit loaded
plugins from a default provider map, which was inferred for every
resource provider based on the contents of a user's package.json, and
was itself prone to bugs.
This PR adds the engine support needed for language hosts to request a
particular version of a provider. If this occurs, the source evaluator
specifically records the intent to load a provider with a given version
and produces a "default" provider registration that requests exactly
that version. This allows the source evaluator to produce multiple
default providers for a signle package, which was previously not
possible.
This is accomplished by having the source evaluator deal in the
"ProviderRequest" type, which is a tuple of version and package. A
request to load a provider whose version matches the package of a
previously loaded provider will re-use the existing default provider. If
the version was not previously loaded, a new default provider is
injected.
* CR Feedback: raise error if semver is invalid
* CR: call String() if you want a hash key
* Update pkg/resource/deploy/providers/provider.go
Co-Authored-By: swgillespie <sean@pulumi.com>
These changes add a new flag to the various `ResourceOptions` types that
indicates that a resource should be deleted before it is replaced, even
if the provider does not require this behavior. The usual
delete-before-replace cascade semantics apply.
Fixes#1620.
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
We run the same suite of changes that we did on gometalinter. This
ended up catching a few new issues, some of which were addressed and
some of which were baselined.
This commit reverts most of #1853 and replaces it with functionally
identical logic, using the notion of status message-specific sinks.
In other words, where the original commit implemented ephemeral status
messages by adding an `isStatus` parameter to most of the logging
methdos in pulumi/pulumi, this implements ephemeral status messages as a
parallel logging sink, which emits _only_ ephemeral status messages.
The original commit message in that PR was:
> Allow log events to be marked "status" events
>
> This commit will introduce a field, IsStatus to LogRequest. A "status"
> logging event will be displayed in the Info column of the main
> display, but will not be printed out at the end, when resource
> operations complete.
>
> For example, for complex resource initialization, we'd like to display
> a series of intermediate results: [1/4] Service object created, for
> example. We'd like these to appear in the Info column, but not at the
> end, where they are not helpful to the user.
Some time ago, we introduced the concept of the initialization error to
Pulumi (i.e., an error where the resource was successfully created but
failed to fully initialize). This was originally implemented in `Create`
and `Update` methods of the resource provider interface; when we
detected an initialization failure, we'd pack the live version of the
object into the error, and return that to the engine.
Omitted from this initial implementation was a similar semantics for
`Read`. There are many implications of this, but one of them is that a
`pulumi refresh` will erase any initialization errors that had
previously been observed, even if the initialization errors still exist
in the resource.
This commit will introduce the initialization error semantics to `Read`,
fixing this issue.
* Serialize SourceEvents coming from the refresh source
The engine requires that a source event coming from a source be "ready
to execute" at the moment that it is sent to the engine. Since the
refresh source sent all goal states eagerly through its source iterator,
the engine assumed that it was legal to execute them all in parallel and
did so. This is a problem for the snapshot, since the snapshot expects
to be in an order that is a legal topological ordering of the dependency
DAG.
This PR fixes the issue by sending refresh source events one-at-a-time
through the refresh source iterator, only unblocking to send the next
step as soon as the previous step completes.
* Fix deadlock in refresh test
* Fix an issue where the engine "completed" steps too early
By signalling that a step is done before committing the step's results
to the snapshot, the engine was left with a race where dependent
resources could find themselves completely executed and committed before
a resource that they depend on has been committed.
Fixespulumi/pulumi#1726
* Fix an issue with Replace steps at the end of a plan
If the last step that was executed successfully was a Replace, we could
end up in a situation where we unintentionally left the snapshot
invalid.
* Add a test
* CR: pass context.Context as first parameter to Iterate
* CR: null->nil
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
