Previously, we only supported config keys that included a ':' delimiter
in config keys specified in the template manifest and in `-c` flags to
`new` and `up`. This prevented the use of project keys in the template
manifest and made it more difficult to pass such keys with `-c`,
effectively preventing the use of `new pulumi.Config()` in project code.
This change fixes this by allowing config keys that don't have a
delimiter in the template manifest and `-c` flags. In such cases, the
project name is automatically prepended behind the scenes, the same as
what `pulumi config set` does.
We already walk through creating a stack and prompting for required
config, and then tell the user to run `pulumi up` to do an initial
deployment. Instead, just proceed with the `up` automatically.
This allows us to get rid of the `mkdir <dir> && cd <dir>` instructions in all our tutorials before `pulumi new`, because anyone who runs `pulumi new` in a non-empty directory will be forced to create a new directory in order to proceed.
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
The fact that we include the `:config:` portion of a configuration
name when sending to the service is an artifact of history. It was
needed back when we needed to support deploying using a new CLI
against a PPC that had older packages embeded in it.
We don't have that sort of problem anymore, so we can stop sending
this data.
* Show a better error message when decrypting fails
It is most often the case that failing to decrypt a secret implies that
the secret was transferred from one stack to another via copying the
configuration. This commit introduces a better error message for this
case and instructs users to explicitly re-encrypt their encrypted keys
in the context of the new stack.
* Spelling
* CR: Grammar fixes
The glog package force the use of golang's underyling flag package,
which Cobra does not use. To work around this, we had a complicated
dance around defining flags in multiple places, calling flag.Parse
explicitly and then stomping values in the flag package with values we
got from Cobra.
Because we ended up parsing parts of the command line twice, each with
a different set of semantics, we ended up with bad UX in some
cases. For example:
`$ pulumi -v=10 --logflow update`
Would fail with an error message that looked nothing like normal CLI
errors, where as:
`$ pulumi -v=10 update --logflow`
Would behave as you expect. To address this, we now do two things:
- We never call flag.Parse() anymore. Wacking the flags with values we
got from Cobra is sufficent for what we care about.
- We use a forked copy of glog which does not complain when
flag.Parse() is not called before logging.
Fixes#301Fixes#710Fixes#968
* Add a list of in-flight operations to the deployment
This commit augments 'DeploymentV2' with a list of operations that are
currently in flight. This information is used by the engine to keep
track of whether or not a particular deployment is in a valid state.
The SnapshotManager is responsible for inserting and removing operations
from the in-flight operation list. When the engine registers an intent
to perform an operation, SnapshotManager inserts an Operation into this
list and saves it to the snapshot. When an operation completes, the
SnapshotManager removes it from the snapshot. From this, the engine can
infer that if it ever sees a deployment with pending operations, the
Pulumi CLI must have crashed or otherwise abnormally terminated before
seeing whether or not an operation completed successfully.
To remedy this state, this commit also adds code to 'pulumi stack
import' that clears all pending operations from a deployment, as well as
code to plan generation that will reject any deployments that have
pending operations present.
At the CLI level, if we see that we are in a state where pending
operations were in-flight when the engine died, we'll issue a
human-friendly error message that indicates which resources are in a bad
state and how to recover their stack.
* CR: Multi-line string literals, renaming in-flight -> pending
* CR: Add enum to apitype for operation type, also name status -> type for clarity
* Fix the yaml type
* Fix missed renames
* Add implementation for lifecycle_test.go
* Rebase against master
* Initial support for passing URLs to `new` and `up`
This PR adds initial support for `pulumi new` using Git under the covers
to manage Pulumi templates, providing the same experience as before.
You can now also optionally pass a URL to a Git repository, e.g.
`pulumi new [<url>]`, including subdirectories within the repository,
and arbitrary branches, tags, or commits.
The following commands result in the same behavior from the user's
perspective:
- `pulumi new javascript`
- `pulumi new https://github.com/pulumi/templates/templates/javascript`
- `pulumi new https://github.com/pulumi/templates/tree/master/templates/javascript`
- `pulumi new https://github.com/pulumi/templates/tree/HEAD/templates/javascript`
To specify an arbitrary branch, tag, or commit:
- `pulumi new https://github.com/pulumi/templates/tree/<branch>/templates/javascript`
- `pulumi new https://github.com/pulumi/templates/tree/<tag>/templates/javascript`
- `pulumi new https://github.com/pulumi/templates/tree/<commit>/templates/javascript`
Branches and tags can include '/' separators, and `pulumi` will still
find the right subdirectory.
URLs to Gists are also supported, e.g.:
`pulumi new https://gist.github.com/justinvp/6673959ceb9d2ac5a14c6d536cb871a6`
If the specified subdirectory in the repository does not contain a
`Pulumi.yaml`, it will look for subdirectories within containing
`Pulumi.yaml` files, and prompt the user to choose a template, along the
lines of how `pulumi new` behaves when no template is specified.
The following commands result in the CLI prompting to choose a template:
- `pulumi new`
- `pulumi new https://github.com/pulumi/templates/templates`
- `pulumi new https://github.com/pulumi/templates/tree/master/templates`
- `pulumi new https://github.com/pulumi/templates/tree/HEAD/templates`
Of course, arbitrary branches, tags, or commits can be specified as well:
- `pulumi new https://github.com/pulumi/templates/tree/<branch>/templates`
- `pulumi new https://github.com/pulumi/templates/tree/<tag>/templates`
- `pulumi new https://github.com/pulumi/templates/tree/<commit>/templates`
This PR also includes initial support for passing URLs to `pulumi up`,
providing a streamlined way to deploy installable cloud applications
with Pulumi, without having to manage source code locally before doing
a deployment.
For example, `pulumi up https://github.com/justinvp/aws` can be used to
deploy a sample AWS app. The stack can be updated with different
versions, e.g.
`pulumi up https://github.com/justinvp/aws/tree/v2 -s <stack-to-update>`
Config values can optionally be passed via command line flags, e.g.
`pulumi up https://github.com/justinvp/aws -c aws:region=us-west-2 -c foo:bar=blah`
Gists can also be used, e.g.
`pulumi up https://gist.github.com/justinvp/62fde0463f243fcb49f5a7222e51bc76`
* Fix panic when hitting ^C from "choose template" prompt
* Add description to templates
When running `pulumi new` without specifying a template, include the template description along with the name in the "choose template" display.
```
$ pulumi new
Please choose a template:
aws-go A minimal AWS Go program
aws-javascript A minimal AWS JavaScript program
aws-python A minimal AWS Python program
aws-typescript A minimal AWS TypeScript program
> go A minimal Go program
hello-aws-javascript A simple AWS serverless JavaScript program
javascript A minimal JavaScript program
python A minimal Python program
typescript A minimal TypeScript program
```
* React to changes to the pulumi/templates repo.
We restructured the `pulumi/templates` repo to have all the templates in the root instead of in a `templates` subdirectory, so make the change here to no longer look for templates in `templates`.
This also fixes an issue around using `Depth: 1` that I found while testing this. When a named template is used, we attempt to clone or pull from the `pulumi/templates` repo to `~/.pulumi/templates`. Having it go in this well-known directory allows us to maintain previous behavior around allowing offline use of templates. If we use `Depth: 1` for the initial clone, it will fail when attempting to pull when there are updates to the remote repository. Unfortunately, there's no built-in `--unshallow` support in `go-git` and setting a larger `Depth` doesn't appear to help. There may be a workaround, but for now, if we're cloning the pulumi templates directory to `~/.pulumi/templates`, we won't use `Depth: 1`. For template URLs, we will continue to use `Depth: 1` as we clone those to a temp directory (which gets deleted) that we'll never try to update.
* List available templates in help text
* Address PR Feedback
* Don't show "Installing dependencies" message for `up`
* Fix secrets handling
When prompting for config, if the existing stack value is a secret, keep it a secret and mask the prompt. If the template says it should be secret, make it a secret.
* Fix ${PROJECT} and ${DESCRIPTION} handling for `up`
Templates used with `up` should already have a filled-in project name and description, but if it's a `new`-style template, that has `${PROJECT}` and/or `${DESCRIPTION}`, be helpful and just replace these with better values.
* Fix stack handling
Add a bool `setCurrent` param to `requireStack` to control whether the current stack should be saved in workspace settings. For the `up <url>` case, we don't want to save. Also, split the `up` code into two separate functions: one for the `up <url>` case and another for the normal `up` case where you have workspace in your current directory. While we may be able to combine them back into a single function, right now it's a bit cleaner being separate, even with some small amount of duplication.
* Fix panic due to nil crypter
Lazily get the crypter only if needed inside `promptForConfig`.
* Embellish comment
* Harden isPreconfiguredEmptyStack check
Fix the code to check to make sure the URL specified on the command line matches the URL stored in the `pulumi:template` config value, and that the rest of the config from the stack satisfies the config requirements of the template.
Many non-secrets are actually pretty high entropy, at least according
to `zxcvbn`. For example: "Hello, Pulumi Timers!" would actually cause
us to say: "this looks like a secret", much in the same way that
"correct horse battery staple" is high entropy according to that
package.
In addition to considering the entropy of the value, gosec (the linter
we copied this logic from) also considers the name of the value that
is being assigned to.
In that spirit, let's only do this check when the config key name
actually looks like it is something we'd want to warn the user about.
We use the same regular expression as `gosec`.
Fixes#1732
In #1341 we promoted a class of errors in fetching git metadata from
glog messages to warnings printed by the CLI. On the asumption that
when we got warnings here they would be actionable.
The major impact here is that when you are working in a repository
which does not have a remote set to GitHub (common if you have just
`git init`'d a repository for a new project) or you don't call your
remote `origin` or you use some other code provider, we end up
printing a warning during every update.
This change does two things:
- Restructure the way we detect metadata to attempt to make progress
when it can. We bias towards returning some metadata even when we
can't determine the complete set of metadata.
- Use a multierror to track all the underlying failures from our
metadata probing and move it back to a glog message.
Overall, this feels like the right balance to me. We are retaining the
rich diagnostics information for when things go wrong, but we aren't
warning about common cases.
We could, of course, try to tighten our huristics (e.g. don't warn if
we can't find a GitHub remote but do warn if we can't compute if the
worktree is dirty) but it feels like that will be a game of
whack-a-mole over time and when warnings do fire its unlikely they
will be actionable.
Fixes#1443
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
This change lets us set runtime specific options in Pulumi.yaml, which
will flow as arguments to the language hosts. We then teach the nodejs
host that when the `typescript` is set to `true` that it should load
ts-node before calling into user code. This allows using typescript
natively without an explicit compile step outside of Pulumi.
This works even when a tsconfig.json file is not present in the
application and should provide a nicer inner loop for folks writing
typescript (I'm pretty sure everyone has run into the "but I fixed
that bug! Why isn't it getting picked up? Oh, I forgot to run tsc"
problem.
Fixes#958
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
Previously, we would unconditionally warn anytime you added a non-secret
config:
$ pulumi config set aws:region us-west-2
warning: saved config key '%s' value '%s' as plaintext;
re-run with --secret to encrypt the value instead.
Use --plaintext to avoid this warning
This was particularly annoying, since it is very common to store
non-secret config. For instance, the AWS region. And it was easy to tune
out because it wasn't actually warning about anything interesting.
This change, which resolvespulumi/pulumi#570, uses an approach similar
to Go's gas linter, to detect high entropy values, and issue an error.
This ensures that we only make noise on things we suspect are actually
secrets being stored in plaintext, and forces the user to pass
--plaintext. For instance, the common case issues no errors:
$ pulumi config set aws:region us-west-2
And in the event that you store something that is secret-like:
$ pulumi config set aws:region nq8r4B4xslzrtj0a3
error: config value 'nq8r4B4xslzrtj0a3' looks like a secret;
rerun with --secret to encrypt it, or --plaintext if you meant
to store in plaintext
To suppress this, simply pass --secret (to encrypt) or --plaintext (to
override the warning).
After running `pulumi new`, we print a message to let the user
know the project has been created, along with next steps to actually
perform a deployment. It's easy for this to get lost among the rest
of the output, however. So, wordsmith it a little, and add some color,
to make it pop a little bit more.
Also add SuggestFor annotations so that `init` and `create` direct
you to run the `new` command (I often accidentally type `init`).
Previously, it would only show the first 7 templates (we currently have 9 total), and you'd have to move the cursor down to the bottom to show the last 2.
Instead of needing you to first select the current stack to use any of
these commands, allow passing `-s <stack-name>` or `--stack
<stack-name>` to say what stack you want to operate on.
These commands still require a `Pulumi.yaml` file to be present, which
is not ideal, but would require a larger refactoring to fix. That
refactoring will happen as part of #1556.
Fixes#1370
This was an artifact of history. Since we'll be supporting the local
backend, we don't need yet another flag guarding it (you already have
to opt in with -c local:// which is enough of a hoop).
This change fixes the following warning issued by using `go get` with
the Pulumi repository:
package github.com/moby/moby/api/types/time: code in directory
/Users/James/Code/go/src/github.com/moby/moby/api/types/time expects
import "github.com/docker/docker/api/types/time"
Moby defines canonical import paths [1] reflecting the lineage back to
the `docker/docker` repository.
[1]: https://github.com/moby/moby/blob/master/api/types/time/duration_convert.go#L1
Usage:
```
pulumi new <template> --dir folderName
```
Used to specify the directory where to place the generated project.
If the directory does not exist, it will be created.
* Error when loading a deployment that is not a version that the CLI understands
* Add a test for 'pulumi stack import' on a badly-versioned deployment
* Move current deployment version to 'apitype'
* Rebase against master
* CR: emit CLI-friendly error message at the two points outside of the engine calling 'DeserializeDeployment'
This change supports displaying manifest information for a stack and
changes the way we handle Snapshots in our backend.
Previously, every call to GetStack would synthesize a Snapshot by
taking the set of resources returned from the
`/api/stacks/<owner>/<name>` endpoint, combined with an empty
manfiest (since the service was not returning the manifest).
This wasn't great for two reasons:
1. We didn't have manifest information, so we couldn't display any of
its information (most important the last updated time).
2. This strategy required that the service return all the resources
for a stack anytime GetStack was called. While the CLI did not
often need this detailed information the fact that we forced the
Service to produce it (which in the case of stack managed PPC would
require the service to talk to yet another service) creates a bunch
of work that we end up ignoring.
I've refactored the code such that `backend.Stack`'s `Snapshot()` method
now lazily requests the information from the service such that we can
construct a `Snapshot()` on demand and only pay the cost when we
actually need it.
I think making more of this stuff lazy is the long term direction we
want to follow.
Unfortunately, right now, it means in cases where we do need this data
we end up fetching it twice. The service does it once when we call
GetStack and then we do it again when we actually need to get at the
Snapshot. However, once we land this change, we can update the
service to no longer return resources on the apistack.Stack type. The
CLI no longer needs this property. We'll likely want to continue in a
direction where `apistack.Stack` can be created quickly by the
service (without expensive database queries or fetching remote
resources) and just add additional endpoints that let us get at the
specific information we want in the specific cases when we want it
instead of forcing us to return a bunch of data that we often ignore.
Fixespulumi/pulumi-service#371
While we wait for upstream to fix the security issue, we'll just pass
`--no-audit` to `npm install` when creating a new project. Since the
warning is against an indirect dependency of @pulumi/pulumi, we can't
actually address the issue ourselves.
Mitigates #1350
In pulumi/pulumi#1356, we observed that we can fail during a destroy
because we attempt to load the language plugin, which now eagerly looks
for the @pulumi/pulumi package.
This is also blocking ingestion of the latest engine bits into the PPC.
It turns out that for destroy (and refresh), we have no need for the
language plugin. So, let's skip loading it when appropriate.
These changes add support for adding a tracing header to API requests
made to the Pulumi service. Setting the `PULUMI_TRACING_HEADER`
environment variable or enabling debug commands and passing the
`--tracing-header` will change the value sent in this header. Setting
this value to `1` will request that the service enable distributed
tracing for all requests made by a particular CLI invocation.
The newly added `pulumi config refresh` updates your local copy of the
Pulumi.<stack-name>.yaml file to have the same configuration as the
most recent deployment in the cloud.
This can be used in a varirty of ways. One place we plan to use it is
in automation to clean up "leaked" stacks we have in CI. With the
changes you'll now be able to do the following:
```
$ cd $(mktemp -d)
$ echo -e "name: who-cares\nruntime: nodejs" > Pulumi.yaml
$ pulumi stack select <leaked-stack-name>
$ pulumi config refresh -f
$ pulumi destroy --force
```
Having a simpler gesture for the above is something we'll want to do
long term (we should be able to support `pulumi destory <stack-name>`
from a completely empty folder, today you need a Pulumi.yaml file
present, even if the contents don't matter).
But this gets us a little closer to where we want to be and introduces
a helpful primitive in the system.
Contributes to #814
These changes add support for injecting client tracing spans into HTTP
requests to the Pulumi API. The server can then rematerialize these span
references and attach its own spans for distributed tracing.
This change moves Git failures from glog.Warnings, which we don't
really pay attention, to true CLI warnings.
This will ensure we at least get bug reports in the event that this
fails on some user machine out in the wild. They are still non-fatal,
of course, since such a failure needn't prevent an update from happening.
This change captures the Git committer and author's login and email
addresses, so that we can display them prominently in the service. At
the moment, we only attribute updates to the identity that performed the
update which, in CI scenarios, is often always the same person for an
organization. This makes Pulumi look like a needlessly lonely place.
These changes enable tracing of Pulumi API calls.
The span with which to associate an API call is passed via a
`context.Context` parameter. This required plumbing a
`context.Context` parameter through a rather large number of APIs,
especially in the backend.
In general, all API calls are associated with a new root span that
exists for essentially the entire lifetime of an invocation of the
Pulumi CLI. There were a few places where the plumbing got a bit hairier
than I was willing to address with these changes; I've used
`context.Background()` in these instances. API calls that receive this
context will create new root spans, but will still be traced.
* Initialize a new stack as part of `pulumi new`
* Prompt for values with defaults preselected
* Install dependencies
* Prompt for default config values
This changes the CLI interface in a few ways:
* `pulumi preview` is back! The alternative of saying
`pulumi update --preview` just felt awkward, and it's a common
operation to want to perform. Let's just make it work.
* There are two flags consistent across all update commands,
`update`, `refresh`, and `destroy`:
- `--skip-preview` will skip the preview step. Note that this
does *not* skip the prompt to confirm that you'd like to proceed.
Indeed, it will still prompt, with a little warning text about
the fact that the preview has been skipped.
* `--yes` will auto-approve the updates.
This lands us in a simpler and more intuitive spot for common scenarios.
I found the flag --force to be a strange name for skipping a preview,
since that name is usually reserved for operations that might be harmful
and yet you're coercing a tool to do it anyway, knowing there's a chance
you're going to shoot yourself in the foot.
I also found that what I almost always want in the situation where
--force was being used is to actually just run a preview and have the
confirmation auto-accepted. Going straight to --force isn't the right
thing in a CI scenario, where you actually want to run a preview first,
just to ensure there aren't any issues, before doing the update.
In a sense, there are four options here:
1. Run a preview, ask for confirmation, then do an update (the default).
2. Run a preview, auto-accept, and then do an update (the CI scenario).
3. Just run a preview with neither a confirmation nor an update (dry run).
4. Just do an update, without performing a preview beforehand (rare).
This change enables all four workflows in our CLI.
Rather than have an explosion of flags, we have a single flag,
--preview, which can specify the mode that we're operating in. The
following are the values which correlate to the above four modes:
1. "": default (no --preview specified)
2. "auto": auto-accept preview confirmation
3. "only": only run a preview, don't confirm or update
4. "skip": skip the preview altogether
As part of this change, I redid a bit of how the preview modes
were specified. Rather than booleans, which had some illegal
combinations, this change introduces a new enum type. Furthermore,
because the engine is wholly ignorant of these flags -- and only the
backend understands them -- it was confusing to me that
engine.UpdateOptions stored this flag, especially given that all
interesting engine options _also_ accepted a dryRun boolean. As of
this change, the backend.PreviewBehavior controls the preview options.
The `go-git` implementation of `git status` is outrageously expensive,
as it performs a hash-based comparision of the working tree against the
committed state with no caching. In some example runs, this takes
upwards of 15 seconds. Because this is on the startup path for updates,
this results in a rather poor user experience.
These changes replace the `go-git` implementation with a call to `git
status --porcelain -z`, which only writes data to stdout if the working
tree is dirty.
Note that these changes also make all git-related update metadata
best-effort.
These changes add a new flag to the CLI, `--profiling`, that enables
CPU and heap profiling as well as execution tracing of the CLI itself.
The argument to this flag serves as a prefix for the profile outputs;
the CPU and heap profiles and execution trace are written to
`[filename].[pid].{cpu,mem,trace}`, respectively.
These changes also fix an issue with `cmdutil.RunFunc` wherein any error
would prevent the command's post-run hooks from executing.
We already have a great history viewing experience on
Pulumi.com. `pulumi history` in the CLI today is basically unuseable,
and instead of working on trying to improve it, let's just remove it
for now.
Fixes#965
This change adds two new (hidden) CLI commands:
* `gen-bash-completion`: This command generates a bash completion
script for the CLI, storing it in the file specified by the 1st arg.
This fixespulumi/pulumi#1172.
* `gen-markdown`: This command generates a directory of Markdown files,
one per command, documenting the CLI commands and their usage.
I originally did these as separate scripts that we can use in our
build processes, but it was actually even easier to make `pulumi` able
to generate them for itself. The nice part about this is that we don't
even need to bundle additional assets in order to distribute e.g. the
bash completion scripts, we can simply tell people to run
$ pulumi gen-bash-completion /etc/bash_completion.d/pulumi
This can also be used in our upcoming Brew installer.
Pat ran into a weird error when trying to do some development agains
the testing cloud:
```
$ pulumi logout
$ pulumi login --cloud-url [test-cloud-url]
Logged into [test-cloud-url]
$ pulumi stack ls
Enter your Pulumi access token from https://pulumi.com/account:
```
In his case, we did not have `current` set in our credentials.json
file (likely due to him calling `pulumi logout` at some point) but we
did have stored credentials for that cloud. When he logged in the CLI
noticed we could reuse the stored credentials but did not update the
the current setting to set the current cloud.
While investigating, I also noticed that `logout` did not always do
the right thing when you were logged into a different backend than
pulumi.com
* Refactor the SnapshotManager interface
Lift snapshot management out of the engine by delegating it to the
SnapshotManager implementation in pkg/backend.
* Add a event interface for plugin loads and use that interface to record plugins in the snapshot
* Remove dead code
* Add comments to Events
* Add a number of tests for SnapshotManager
* CR feedback: use a successful bit on 'End' instead of having a separate 'Abort' API
* CR feedback
* CR feedback: register plugins one-at-a-time instead of the entire state at once
- Show Emojis on non-Windows platforms, instead of just macOS
- Change help text for `pulumi logs` to clarify the logs are specific
to a stack, not a project
- Display stack name when showing logs
- Have preamble text show to users for engine operations read a little
nicer
PPCs are no longer a central concept to our model, but instead a
feature that that pulumi.com provides to some organizations. Let's
remove most mentions of PPCs except for cases where we really need to
talk about them (e.g. when a stack is actually hosted in a PPC instead
of just via the normal pulumi.com service)
Also remove some "in the Pulumi Cloud" messages from the CLI, as using
the Pulumi Cloud is now the only real way to use pulumi.
Fixespulumi/pulumi-service#1117
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This command cancels a stack's currently running update, if any. It can
be used to recover from the scenario in which an update is aborted
without marking the running update as complete. Once an update has been
cancelled, it is likely that the affected stack will need to be repaired
via an pair of export/import commands before future updates can succeed.
This is part of #1077.
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...
This change introduces support for using the cloud backend when
`pulumi init` has not been run. When this is the case, we use the new
identity model, where a stack is referenced by an owner and a stack
name only.
There are a few things going on here:
- We add a new `--owner` flag to `pulumi stack init` that lets you
control what account a stack is created in.
- When listing stacks, we show stacks owned by you and any
organizations you are a member of. So, for example, I can do:
* `pulumi stack init my-great-stack`
* `pulumi stack init --owner pulumi my-great-stack`
To create a stack owned by my user and one owned by my
organization. When `pulumi stack ls` is run, you'll see both
stacks (since they are part of the same project).
- When spelling a stack on the CLI, an owner can be optionally
specified by prefixing the stack name with an owner name. For
example `my-great-stack` means the stack `my-great-stack` owned by
the current logged in user, where-as `pulumi/my-great-stack` would
be the stack owned by the `pulumi` organization
- `--all` can be passed to `pulumi stack ls` to see *all* stacks you
have access to, not just stacks tied to the current project.
Long term, a stack name alone will not be sufficent to address a
stack. Introduce a new `backend.StackReference` interface that allows
each backend to give an opaque stack reference that can be used across
operations.
This change removes the need to `pulumi init` when targeting the local
backend. A fair amount of the change lays the foundation that the next
set of changes to stop having `pulumi init` be used for cloud stacks
as well.
Previously, `pulumi init` logically did two things:
1. It created the bookkeeping directory for local stacks, this was
stored in `<repository-root>/.pulumi`, where `<repository-root>` was
the path to what we belived the "root" of your project was. In the
case of git repositories, this was the directory that contained your
`.git` folder.
2. It recorded repository information in
`<repository-root>/.pulumi/repository.json`. This was used by the
cloud backend when computing what project to interact with on
Pulumi.com
The new identity model will remove the need for (2), since we only
need an owner and stack name to fully qualify a stack on
pulumi.com, so it's easy enough to stop creating a folder just for
that.
However, for the local backend, we need to continue to retain some
information about stacks (e.g. checkpoints, history, etc). In
addition, we need to store our workspace settings (which today just
contains the selected stack) somehere.
For state stored by the local backend, we change the URL scheme from
`local://` to `local://<optional-root-path>`. When
`<optional-root-path>` is unset, it defaults to `$HOME`. We create our
`.pulumi` folder in that directory. This is important because stack
names now must be unique within the backend, but we have some tests
using local stacks which use fixed stack names, so each integration
test really wants its own "view" of the world.
For the workspace settings, we introduce a new `workspaces` directory
in `~/.pulumi`. In this folder we write the workspace settings file
for each project. The file name is the name of the project, combined
with the SHA1 of the path of the project file on disk, to ensure that
multiple pulumi programs with the same project name have different
workspace settings.
This does mean that moving a project's location on disk will cause the
CLI to "forget" what the selected stack was, which is unfortunate, but
not the end of the world. If this ends up being a big pain point, we
can certianly try to play games in the future (for example, if we saw
a .git folder in a parent folder, we could store data in there).
With respect to compatibility, we don't attempt to migrate older files
to their newer locations. For long lived stacks managed using the
local backend, we can provide information on where to move things
to. For all stacks (regardless of backend) we'll require the user to
`pulumi stack select` their stack again, but that seems like the
correct trade-off vs writing complicated upgrade code.
Upcoming work to remove the need for `pulumi init` makes testing the
upgrade code much harder than it did in the past (since workspace data
is moving to a different location on the file system, as well as some
other changes).
Instead of trying to maintain the code and test, let's just remove
it. Folks who haven't migrated (LM and the PPC deployment in the
service) should use the 0.11.3 or earlier CLI to migrate their
projects (simply by logging in and running a pulumi command) or move
things forward by hand.
This field indicates the schema of the serialized deployment. This field
behaves identically to the `Version` field of
`PatchUpdateCheckpointRequest`.
This is part of pulumi/pulumi-service#1046
We already had logic to skip prompting a user to create a stack,
when a stack-specific command was run but none was found, but we
only heeded it in one of two cases. This fixes the other case.
To help us diagnose various issues -- and also just as a nice status
reporting thing -- we'll add a --verbose flag to the pulumi plugin
install command. This will get used in the package scripts.
We have some code that deals with upgrading legacy projects (which had
workspace level configuration) to the new format where configuration
information was stored SxS with the application.
This code requires us to get a list of stacks from the backend (which
for hosted stacks means hitting api.pulumi.com) as part of the upgrade
process, so we knew all the stacks the user's project has. This is a
somewhat slow operation (which we will make faster regardless) but we
can structure things such that we don't need to do this often.
In the common case, we don't need to actually do upgrading at
all (new projects won't need it and once a project is upgraded that
project won't need it either) so update the code first to check if we
would need to do any work and if so, do the expensive operation of
getting stacks from a backend.
This should help with the slight pauses we've seen on the command line
since the work to default to folks logging in has landed.
The code that calculated plugin sizes was incorrect; it would show the
total size consumed by all plugins, for each plugin, which is clearly
busted. We should compute each plugin's size from its own directory.
This clashes with the existing --emoji/-e flag for the pulumi-wide
flags. I doubt --exact is going to be very common, so rather than
trying to invent a shorthand for it, we can just support the long form.
This change lets plugin versions to float in two ways:
1) If a `pulumi plugin install` detects a newer version is available
already, there's no need to download and install the older version.
2) If the engine attempts to load a plugin at a particular version,
if a newer version is available, it will be accepted without error.
As part of this, we permit $PATH to have the final say when determining
which version to accept. That is, it can always override the choice.
Note that I highly suspect, in the limit, that we'll want to stop doing
this for major version incompatibilities. For now, since we don't
envision any such version changes imminently, this will suffice.
This change does three major things:
1. Removes the ability to be logged into multiple clouds at the same
time. Previously, we supported being logged into multiple clouds at
the same time and the CLI would fan out requests and join responses
when needed. In general, this was only useful for Pulumi employees
that wanted run against multiple copies of the service (say production
and staging) but overall was very confusing (for example in the old
world a stack with the same identity could appear twice (since it was
in two backends) which the CLI didn't handle very well).
2. Stops treating the "local" backend as a special thing, from the
point of view of the CLI. Previouly we'd always connect to the local
backend and merge that data with whatever was in clouds we were
connected to. We had gestures like `--local` in `pulumi stack init`
that meant "use the local mode". Instead, to use the local mode now
you run `pulumi login --cloud-url local://` and then you are logged in
the local backend. Since you can only ever be logged into a single
backend, we can remove the `--local` and `--remote` flags from `pulumi
stack init`, it just now requires you to be logged in and creates a
stack in whatever back end you were logged into. When logging into the
local backend, you are not prompted for an access key.
3. Prompt for login in places where you have to log in, if you are not
already logged in.
Tests now target managed stacks instead of local stacks.
The existing logged in user and target backend API are used unless PULUMI_ACCES_TOKEN is defined, in which case tests are run under that access token and against the PULUMI_API backend.
For developer machines, we will now need to be logged in to Pulumi to run tests, and whichever default API backend is logged in (the one listed as current in ~/.pulumi/credentials.json) will be used. If you need to override these, provide PULUMI_ACCESS_TOKEN and possibly PULUMI_API.
For Travis, we currently target the staging service using the Pulumi Bot user.
We have decided to run tests in the pulumi organization. This can be overridden for local testing (or in Travis in the future) by defining PULUMI_API_OWNER_ORGANIZATION and using an access token with access to that organization.
Part of pulumi/home#195.
This change includes a bunch of refactorings I made in prep for
doing refresh (first, the command, see pulumi/pulumi#1081):
* The primary change is to change the way the engine's core update
functionality works with respect to deploy.Source. This is the
way we can plug in new sources of resource information during
planning (and, soon, diffing). The way I intend to model refresh
is by having a new kind of source, deploy.RefreshSource, which
will let us do virtually everything about an update/diff the same
way with refreshes, which avoid otherwise duplicative effort.
This includes changing the planOptions (nee deployOptions) to
take a new SourceFunc callback, which is responsible for creating
a source specific to the kind of plan being requested.
Preview, Update, and Destroy now are primarily differentiated by
the kind of deploy.Source that they return, rather than sprinkling
things like `if Destroying` throughout. This tidies up some logic
and, more importantly, gives us precisely the refresh hook we need.
* Originally, we used the deploy.NullSource for Destroy operations.
This simply returns nothing, which is how Destroy works. For some
reason, we were no longer doing this, and instead had some
`if Destroying` cases sprinkled throughout the deploy.EvalSource.
I think this is a vestige of some old way we did configuration, at
least judging by a comment, which is apparently no longer relevant.
* Move diff and diff-printing logic within the engine into its own
pkg/engine/diff.go file, to prepare for upcoming work.
* I keep noticing benign diffs anytime I regenerate protobufs. I
suspect this is because we're also on different versions. I changed
generate.sh to also dump the version into grpc_version.txt. At
least we can understand where the diffs are coming from, decide
whether to take them (i.e., a newer version), and ensure that as
a team we are monotonically increasing, and not going backwards.
* I also tidied up some tiny things I noticed while in there, like
comments, incorrect types, lint suppressions, and so on.
These changes refactor direct interactions with the Pulumi API out of
the cloud backend and into a subpackage, `pkg/backend/cloud/client`.
This package exposes a slightly higher-level API that takes care of
calculating paths, performing HTTP calls, and occasionally wrapping
multiple physical calls into a single logical call (notably the creation
of an update and the upload of its program).
This is primarily intended as preparation for some of the changes
suggested in the feedback for #1067.
If you use --cloud-url, as in
$ pulumi stack init foo --cloud-url https://x.io
we would silently fall back to logic that creates local stacks.
I realize all of this will get better with the new stack identity
model, however in the meantime, let's infer that the user wanted
--remote when --cloud-url is non-"".
When run without a `--plaintext` or `--secret` argument, `pulumi
config` warns that the value is stored unecrypted and that you can
pass `--secret` to encrypt it. Now, we also mention that `--plaintext`
can be pased explicity on the command line to avoid the warning.
Fixes#752
Note: This is a minor issue that I didn't get to for M11 that isn't
required for M11 and would be fine merging for post-M11.
When you specify a template name explicitly (e.g.
`pulumi new typescript`), we'll try to download the template tarball
without first downloading the JSON list of available templates. The JSON
includes a description used when replacing the `${DESCRIPTION}` string
in template files. Since we didn't download the JSON, we won't have a
description, so we fallback to a default value (`"A Pulumi project."`).
This also happens when specifying `--offline` to use an existing
template under `~/.pulumi/templates`; we won't have a description for
the template, so we fallback to a default description. The fallback
value happens to be the same as the description for each of our current
templates, so noone will currently notice an issue.
For M11, I included initial support for a template manifest file where
the description (and any future metadata) could be stored, but didn't go
as far as actually reading the file.
This change makes it so the CLI actually reads the description from the
manifest file (if it exists), otherwise falling back to the default
value as is done currently. Some minor related cleanup is included in
this change.
This fixes two different DST bugs in the logs test, one of which
led to the failure in pulumi/pulumi#1041:
1) The assertion was using ANSIC formatting, which does not contain
a time-zone, and because we are now in DST, the resulting time
didn't parse and format in a round-trippable way. Instead, let's
use RFC3339, and let's be explicit about the timezone.
2) The parseSince("1m30s") would in theory fail if the DST changed
at just the right moment, since the reference time could end up
different from the reference time that the test is using. Let's
expose the reference time to the caller, so that they may decide
how to deal with these situations, and let's use UTC here.
This adds a `pulumi new` command which makes it easy to quickly
automatically create the handful of needed files to get started building
an empty Pulumi project.
Usage:
```
$ pulumi new typescript
```
Or you can leave off the template name, and it will ask you to choose
one:
```
$ pulumi new
Please choose a template:
> javascript
python
typescript
```
The engine now emits events with richer metadata during the
ResourceOutputs and ResourcePre callbacks. The CLI can then use this
information to decide if it should display the event or not and how
much of the event to display.
Options dealing with what to display and how to display it have moved
into the CLI and the engine now emits all information for each event.
The engine now unconditionally emits a new type of event, a
PreludeEvent, which contains the configuration for a stack as well as
an indication if the stack is being previewed or updated. The
responsibility for interpreting the --show-config flag on the command
line is now handled by the CLI, which uses this to decide if it should
print the configuration or not, and then writes the "Previewing
changes" or "Deploying chanages" header.
This helper method is only really used for testing, but we should not
allow it to create a Key who's namespace has a colon (as ParseKey
would not build something like this).
config.Key has become a pair of namespace and name. Because the whole
world has not changed yet, there continues to be a way to convert
between a tokens.ModuleMember and config.Key, however now sometime the
conversion from tokens.ModuleMember can fail (when the module member
is not of the form `<package>:config:<name>`).
Right now, config.Key is a type alias for tokens.ModuleMember. I did a
pass over the codebase such that we use config.Key everywhere it
looked like the value did not leak to some external process (e.g a
resource provider or a langhost).
Doing this makes it a little clearer (hopefully) where code is
depending on a module member structure (e.g. <package>:config:<value>)
instead of just an opaque type.
As it stands, we only configure those providers for which configuration
is present. This can lead to surprising failure modes if those providers
are then used to create resources. These changes ensure that all
resource providers that are not configured during plan initialization
are configured upon first load.
Fixes#758.
By using untyped deployment structures via `json.RawMessage`, we can
support round-tripping between old CLI clients and newer servers, without
dropping possibly-important information on the floor. I hadn't realized
this design goal with the original system, and after talking to @pgavlin,
I better realized the intent and that we want to preserve this.
The filenames we used to store history data locally only had second
level precision. On my machine, the test history test is able to run
multiple `pulumi update` commands in the same second, which causes a
newer history file to overwrite an older one.
This change moves to using a nanosecond precision timestamp when
writing config. In addition, the CLI was trying to sort the updates
that came back from the backend (instead of just trusting them to be
in newest first order, as we documented) so I removed that code as
well.
Migrate configuration from the old model to the new model. The
strategy here is that when we first run `pulumi` we enumerate all of
the stacks from all of the backends we know about and for each stack
get the configuration values from the project and workspace and
promote them into the new file. As we do this, we remove stack
specific config from the workspace and Pulumi.yaml file.
If we are able to upgrade all the stacks we know about, we delete all
global configuration data in the workspace and in Pulumi.yaml as well.
We have a test that ensures upgrades continue to work.
This change updates our configuration model to make it simpler to
understand by removing some features and changing how things are
persisted in files.
Notable changes:
- We've removed the notion of "workspace" vs "project"
config. Now, configuration is always stored in a file next to
`Pulumi.yaml` named `Pulumi.<stack-name>.yaml` (the same file we'd
use for an other stack specific information we would need to persist
in the future).
- We've removed the notion of project wide configuration. Every new
stack gets a completely empty set of configuration and there's no
way to share common values across stacks, instead the common value
has to be set on each stack.
We retain some of the old code for the configuration system so we can
support upgrading a project in place. That will happen with the next
change.
This change fixes some issues and allows us to close some
others (since they are no longer possible).
Fixes#866Closes#872Closes#731
We are going to be changing the configuration model. To begin, let's
take most of the existing stuff and mark it as "deprecated" so we can
keep the existing behavior (to help transition newer code forward)
while making it clear what APIs should not be called in the
implementation of `pulumi` itself.
Per pulumi/pulumi#984, we will now issue an error if it appears you're
importing a checkpoint from a different stack. This can be overridden
if you know what you're doing (with --force), but in general this is a
sign that you're doing something very wrong that will be hard to undo.
Despite our good progress moving towards having an apitype package,
where our exchange types live and can be shared among the engine and
our services, there were a few major types that were still duplciated.
Resource was the biggest example -- and indeed, the apitype varirant
was missing the new Dependencies property -- but there were others,
like Manfiest, PluginInfo, etc. These too had semi-random omissions.
This change merges all of these types into the apitype package. This
not only cleans up the redundancy and missing properties, but will
"force the issue" with respect to keeping them in sync and properly
versioning the information in a backwards compatible way.
The resource/stack package still exists as a simple marshaling layer
to and from the engine's core data types.
Finally, I've made the controversial change to share the actual
Deployment data structure at the apitype layer also. This will force
us to confront differences in that data structure similarly, and will
allow us to leverage the strong typing throughout to catch issues.
If currently logged in, `stack init` creates a managed stack. Otherwise, it creates a local
stack. This avoids the need to specify `--local` when not using the service.
As today, `--local` can be passed, which will create a local stack regardless of being logged
in or not.
A new flag, `--remote`, has been added, which can be passed to indicate a managed stack,
used to force an error if not logged into the service.
1. Output different-colored edges for parent-child resource
relationships
2. Allow the changing of edge colors via command-line parameters
3. Allow the skipping of the parent-child graph or the
dependency graph when calculating all edges
This modifies the Graph interface slightly to allow an edge to specify
what color should be used when drawing it.
Some file systems do not record BithTimes and BirthTime panics in
these cases. We use HasBirthTimes to guard against this and print n/a
when we do not have a BirthTime.
This commit does two things:
1. All dependencies of a resource, both implicit and explicit, are
communicated directly to the engine when registering a resource. The
engine keeps track of these dependencies and ultimately serializes
them out to the checkpoint file upon successful deployment.
2. Once a successful deployment is done, the new `pulumi stack
graph` command reads the checkpoint file and outputs the dependency
information within in the DOT format.
Keeping track of dependency information within the checkpoint file is
desirable for a number of reasons, most notably delete-before-create,
where we want to delete resources before we have created their
replacement when performing an update.
I was reminded of this yesterday with unprintable characters as I
debugged some things on Windows. Inspired by Yarn, this change adds
a new flag --emoji (-e for short) that can be used to control whether
we show ASCII-only characters or not in the console. On Mac, it
defaults to true, and on Windows and Linux, it defaults to false.
This also brings back the retro ASCII-friendly progress spinner
when --emoji is disabled.
This adds support for two things:
* Installing all plugins that a project requires with a single command:
$ pulumi plugin install
* Listing the plugins that this project requires:
$ pulumi plugin ls --project
$ pulumi plugin ls -p
Prior to this change, we had a flat list of files in the
~/.pulumi/plugins directory. This was simple but unfortunately
too naive, since we in fact have multi-file plugins already.
Dumping them in the same directory increases the risk of a
collision. Instead, let's put them in their own directories.
This means, for example, you'll see things like
~/.pulumi/plugins/
resource-aws-v0.11.0-dev-8-g57a0d62/
README.txt
pulumi-resource-aws
Notice that the binary name stays the same -- e.g., in this
case pulumi-resource-aws -- and does not include the version.
This makes it simple to add it to your $PATH in the usual ways
and have it loaded as a preferred location.
This change renames prune to rm, to match what we use for other
similar commands. Someday perhaps we will add a prune that uses
some smarts to prune old plugins, etc.
Also tidy up some minor things about the command. For example,
we now require --all if you want to truly clear the entire plugin
cache. We also print more detail, like the full list of plugins
to be removed, in the confirmation prompt.
This brings back the Node.js language plugin's GetRequiredPlugins
function, reimplemented in Go now that the language host has been
rewritten from JavaScript. Fairly rote translation, along with
some random fixes required to get tests passing again.
This enables you to install a plugin directly from a file, rather
than the default of downloading it from our release share. This is
primarily useful as a test tool, but will also be a useful escape
hatch for 3rd party extensibility, where we do not have a share.
$ pulumi plugin install resource aws v0.1.0 -f my_aws_provider.tgz
This change adds a GetRequiredPlugins RPC method to the language
host, enabling us to query it for its list of plugin requirements.
This is language-specific because it requires looking at the set
of dependencies (e.g., package.json files).
It also adds a call up front during any update/preview operation
to compute the set of plugins and require that they are present.
These plugins are populated in the cache and will be used for all
subsequent plugin-related operations during the engine's activity.
We now cache the language plugins, so that we may load them
eagerly too, which we never did previously due to the fact that
we needed to pass the monitor address at load time. This was a
bit bizarre anyhow, since it's really the Run RPC function that
needs this information. So, to enable caching and eager loading
-- which we need in order to invoke GetRequiredPlugins -- the
"phone home" monitor RPC address is passed at Run time.
In a subsequent change, we will switch to faulting in the plugins
that are missing -- rather than erroring -- in addition to
supporting the `pulumi plugin install` CLI command.
This change implements basic plugin management, but we do not yet
actually use the plugins for anything (that comes next).
Plugins are stored in `~/.pulumi/plugins`, and are expected to be
in the format `pulumi-<KIND>-<NAME>-v<VERSION>[.exe]`. The KIND is
one of `analyzer`, `language`, or `resource`, the NAME is a hyphen-
delimited name (e.g., `aws` or `foo-bar`), and VERSION is the
plugin's semantic version (e.g., `0.9.11`, `1.3.7-beta.a736cf`, etc).
This commit includes four new CLI commands:
* `pulumi plugin` is the top-level plugin command. It does nothing
but show the help text for associated child commands.
* `pulumi plugin install` can be used to install plugins manually.
If run with no additional arguments, it will compute the set of
plugins used by the current project, and download them all. It
may be run to explicitly download a single plugin, however, by
invoking it as `pulumi plugin install KIND NAME VERSION`. For
example, `pulumi plugin install resource aws v0.9.11`. By default,
this command uses the cloud backend in the usual way to perform the
download, although a separate URL may be given with --cloud-url,
just like all other commands that interact with our backend service.
* `pulumi plugin ls` lists all plugins currently installed in the
plugin cache. It displays some useful statistics, like the size
of the plugin, when it was installed, when it was last used, and
so on. It sorts the display alphabetically by plugin name, and
for plugins with multiple versions, it shows the newest at the top.
The command also summarizes how much disk space is currently being
consumed by the plugin cache. There are no filtering capabilities yet.
* `pulumi plugin prune` will delete plugins from the cache. By
default, when run with no arguments, it will delete everything.
It may be run with additional arguments, KIND, NAME, and VERSION,
each one getting more specific about what it will delete. For
instance, `pulumi plugin prune resource aws` will delete all AWS
plugin versions, while `pulumi plugin prune resource aws <0.9`
will delete all AWS plugins before version 0.9. Unless --yes is
passed, the command will confirm the deletion with a count of how
many plugins will be affected by the command.
We do not yet actually download plugins on demand yet. That will
come in a subsequent change.
This change includes a handful of stack-related CLI formatting
improvements that I've been noodling on in the background for a while,
based on things that tend to trip up demos and the inner loop workflow.
This includes:
* If `pulumi stack select` is run by itself, use an interactive
CLI menu to let the user select an existing stack, or choose to
create a new one. This looks as follows
$ pulumi stack select
Please choose a stack, or choose to create a new one:
abcdef
babblabblabble
> currentlyselected
defcon
<create a new stack>
and is navigated in the usual way (key up, down, enter).
* If a stack name is passed that does not exist, prompt the user
to ask whether s/he wants to create one on-demand. This hooks
interesting moments in time, like `pulumi stack select foo`,
and cuts down on the need to run additional commands.
* If a current stack is required, but none is currently selected,
then pop the same interactive menu shown above to select one.
Depending on the command being run, we may or may not show the
option to create a new stack (e.g., that doesn't make much sense
when you're running `pulumi destroy`, but might when you're
running `pulumi stack`). This again lets you do with a single
command what would have otherwise entailed an error with multiple
commands to recover from it.
* If you run `pulumi stack init` without any additional arguments,
we interactively prompt for the stack name. Before, we would
error and you'd then need to run `pulumi stack init <name>`.
* Colorize some things nicely; for example, now all prompts will
by default become bright white.
Previously, we would just use normal go formatting when displaying
output values. This was fine for simple values like strings and ints,
but for arrays or objects, you'd end up with values that looked a
little stange.
We now run the objects through json.Marshal first, to get nicer string
values for more complex objects. However, when the top level value is
a single string, we elide the quotes. This is not true JSON, but it
displays much nicer.
When we add something like `--format=json` (see pulumi#496) it will
provide a way to treat output unfiormly as JSON.
Fixes#736
This addresses pulumi/pulumi#446: what we used to call "package" is
now called "project". This has gotten more confusing over time, now
that we're doing real package management.
Also fixespulumi/pulumi#426, while in here.
At one point `pulumi update` was spelled `pulumi push` and we wrote
some help documentation about that. When we changed to `pulumi update`
we did not revise the documentation.
Fixes#925
When reading a configuration value from standard in and standard in is
not connected to a terminal, read until EOF and then trim a trailing
newline (if present) to get the value
Fixes#822
The existing logic would flow colorization information into the
engine, so depending on the settings in the CLI, the engine may or may
not have emitted colorized events. This coupling is not great and we
want to start moving to a world where the presentation happens
exclusively at the CLI level.
With this change, the engine will always produce strings that have the
colorization formatting directives (i.e. the directives that
reconquest/loreley understands) and the CLI will apply
colorization (which could mean either running loreley to turn the
directives into ANSI escape codes, or drop them or retain them, for
debuging purposes).
Fixes#742
This PR adds a new `pulumi history` command, which prints the update history for a stack.
The local backend stores the update history in a JSON file on disk, next to the checkpoint file. The cloud backend simply provides the update metadata, and expects to receive all the data from a (NYI) `/history` REST endpoint.
`pkg/backend/updates.go` defines the data that is being persisted. The way the data is wired through the system is adding a new `backend.UpdateMetadata` parameter to a Stack/Backend's `Update` and `Destroy` methods.
I use `tests/integration/stack_outputs/` as the simple app for the related tests, hence the addition to the `.gitignore` and fixing the name in the `Pulumi.yaml`.
Fixes#636.
The engine will use this flag to decide whether or not to provide
undefined input property values to resource providers. This is
important because an input property can be defined if it is sourced from
another resource's output property that is not known to be stable (i.e.
that property is not known to be consistent between preview and apply).
Failing to provide these undefined values can then cause input
validation to fail.
`pulumi stack init` defaults to trying to create a stack in the Pulumi
Cloud. If you are not logged in, it prints an error telling you to log
in.
With this change, the error message also points out that you can pass
`--local` to `pulumi stack init` to create the stack locally.
In the Pulumi Cloud, there is no guarantee that two stacks will share
the same encryption key. This means that encrypted config can not be
shared across stacks (in the Pulumi.yaml) file. To mimic this behavior
in the local experience, we now use a unique key per stack.
When upgrading an existing project, for any stack with existing
secrets, we copy the existing key into this stack. Future stacks will
get thier own encryption key. This strikes a balance between
expediency of implementation, the end user UX and not having to make a
breaking change.
As part of this change, I have introduced a CHANGELOG.md file in the
root of the repository and added a small note about the change to it.
Fixes#769
This PR surfaces the configuration options available to updates, previews, and destroys to the Pulumi Service. As part of this I refactored the options to unify them into a single `engine.UpdateOptions`, since they were all overlapping to various degrees.
With this PR we are adding several new flags to commands, e.g. `--summary` was not available on `pulumi destroy`.
There are also a few minor breaking changes.
- `pulumi destroy --preview` is now `pulumi destroy --dry-run` (to match the actual name of the field).
- The default behavior for "--color" is now `Always`. Previously it was `Always` or `Never` based on the value of a `--debug` flag. (You can specify `--color always` or `--color never` to get the exact behavior.)
Fixes#515, and cleans up the code making some other features slightly easier to add.
These changes refactor the engine's entrypoints--Deploy, Destroy, and
Preview--to be update-centric rather than stack-centric. Each of these
methods now takes a value of a new type, Update, that abstracts away the
vagaries of fetching and maintaining the update's state. This
refactoring also reinforces Pulumi.yaml as a CLI concept rather than an
engine concept; the CLI is now the only reader/writer of this format.
These changes will smooth the way for a few refactorings on the service
side that will aid in update isolation.
These changes add the ability to export a stack's latest deployment or
import a new deployment to a stack via the Pulumi CLI. These
capabilities are exposed by two new verbs under `stack`:
- export, which writes the current stack's latest deployment to stdout
- import, which reads a new deployment from stdin and applies it to the
current stack.
In the local case, this simply involves reading/writing the stack's
latest checkpoint file. In the cloud case, this involves hitting two new
endpoints on the service to perform the export or import.
Use the new {en,de}crypt endpoints in the Pulumi.com API to secure
secret config values. The ciphertext for a secret config value is bound
to the stack to which it applies and cannot be shared with other stacks
(e.g. by copy/pasting it around in Pulumi.yaml). All secrets will need
to be encrypted once per target stack.
Our recent changes to colorization changed from a boolean to a tri-valued
enum (Always, Never, Raw). The events from the service, however, are still
boolean-valued. This changes the message payload to carry the full values.
The prior behavior with cloud authentication was a bit confusing
when authenticating against anything but https://pulumi.com/. This
change fixes a few aspects of this:
* Improve error messages to differentiate between "authentication
failed" and "you haven't logged into the target cloud URL."
* Default to the cloud you're currently authenticated with, rather
than unconditionally selecting https://pulumi.com/. This ensures
$ pulumi login -c https://api.moolumi.io
$ pulumi stack ls
works, versus what was currently required
$ pulumi login -c https://api.moolumi.io
$ pulumi stack ls -c https://api.moolumi.io
with confusing error messages if you forgot the second -c.
* To do this, our default cloud logic changes to
1) Prefer the explicit -c if supplied;
2) Otherwise, pick the "currently authenticated" cloud; this is
the last cloud to have been targeted with pulumi login, or
otherwise the single cloud in the list if there is only one;
3) https://pulumi.com/ otherwise.
Part of the work to make it easier to tests of diff output. Specifically, we now allow users to pass --color=option for several pulumi commands. 'option' can be one of 'always', 'never', 'raw', and 'auto' (the default).
The meaning of these flags are:
1. auto: colorize normally, unless in --debug
2. always: always colorize no matter what
3. never: never colorize no matter what.
4. raw: colorize, but preserve the original "<{%%}>" style control codes and not the translated platform specific codes. This is for testing purposes and ensures we can have test for this stuff across platform.
This does three things:
* Use nice humanized times for update times, to avoid ridiculously
long timestamps consuming lots of horizontal space. Instead of
LAST UPDATE
2017-12-12 12:22:59.994163319 -0800 PST
we now see
LAST UPDATE
1 day ago
* Use the longest config key for the horizontal spacing when the key
exceeds the default alignment size. This avoids individual lines
wrapping in awkward ways.
* Do the same for stack names and output properties.
This will allow us to remove a lot of current boilerplate in individual tests, and move it into the test harness.
Note that this will require updating users of the integration test framework. By moving to a property bag of inputs, we should avoid needing future breaking changes to this API though.
As articulated in #714, the way config defaults to workspace-local
configuration is a bit error prone, especially now with the cloud
workflow being the default. This change implements several improvements:
* First, --save defaults to true, so that configuration changes will
persist into your project file. If you want the old local workspace
behavior, you can specify --save=false.
* Second, the order in which we applied configuration was a little
strange, because workspace settings overwrote project settings.
The order is changed now so that we take most specific over least
specific configuration. Per-stack is considered more specific
than global and project settings are considered more specific
than workspace.
* We now warn anytime workspace local configuration is used. This
is a developer scenario and can have subtle effects. It is simply
not safe to use in a team environment. In fact, I lost an arm
this morning due to workspace config... and that's why you always
issue warnings for unsafe things.
Instead of unconditionally emitting a message when configuring
values, which is easy to miss, instead print out a more helpful
warning iff you are configuring a plaintext value that you are
also saving to your project.
This change adds a `pulumi stack output` command. When passed no
arguments, it prints all stack output properties, in exactly the
same format as `pulumi stack` does (just without all the other stuff).
More importantly, if you pass a specific output property, a la
`pulumi stack output clusterARN`, just that property will be printed,
in a scriptable-friendly manner. This will help us automate wiring
multiple layers of stacks together during deployments.
This fixespulumi/pulumi#659.
If a cloud you've previously authenticated with goes away -- as ours
sort of did, because the cloud endpoing in the CLI changed (to actually
be correct) -- then you can't logout without manually editing the
credentials file in your workspace. This is a little annoying. So,
rather than that, let's have a `pulumi logout --all` command that just
logs out of all clouds you are presently authenticated with.
At some point, we fixed a bug in the way state is managed for "same"
steps, which meant that we wouldn't see newly added output properties.
This had the effect that, if you had a stack already stood up, and
updated it to have output properties, we would miss them. (Stacks
stood up from scratch would still have them.) This fixes that problem,
in addition to two other things: 1) we need to sort output property
names to ensure a deterministic ordering, and 2) we need to also
unconditionally apply the outputs RPC coming in, to ensure that the
resulting resource always has the correct outputs (so that for example
deleting prior output properties actually deletes them).
Also add some testing for this area to make sure we don't break again.
Fixespulumi/pulumi#631.
We were previously filtering out pulumi:pulumi:Stack resources
from the output of `pulumi stack`. This is perhaps the right thing
to do -- since it's just a logical container and every stack will
contain one -- but it poses problems because the overall experience
right now treats it like a resource. So filtering it is odd in
a few ways: e.g., resource counts look wrong, removing the stack
won't work because there's a hidden resource within it, etc. This
change simply lists it in the output, which seems safe to do for now.
This change implements some feedback from @ellismg.
* Make backend.Stack an interface and let backends implement it,
enabling dynamic type testing/casting to access information
specific to that backend. For instance, the cloud.Stack conveys
the cloud URL, org name, and PPC name, for each stack.
* Similarly expose specialized backend.Backend interfaces,
local.Backend and cloud.Backend, to convey specific information.
* Redo a bunch of the commands in terms of these.
* Keeping with this theme, turn the CreateStack options into an
opaque interface{}, and let the specific backends expose their
own structures with their own settings (like PPC name in cloud).
* Show both the org and PPC names in the cloud column printed in
the stack ls command, in addition to the Pulumi Cloud URL.
Unrelated, but useful:
* Special case the 401 HTTP response and make a friendly error,
to tell the developer they must use `pulumi login`. This is
better than tossing raw "401: Unauthorized" errors in their face.
* Change the "Updating stack '..' in the Pulumi Cloud" message to
use the correct action verb ("Previewing", "Destroying", etc).
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
This change adds a new manifest section to the checkpoint files.
The existing time moves into it, and we add to it the version of
the Pulumi CLI that created it, along with the names, types, and
versions of all plugins used to generate the file. There is a
magic cookie that we also use during verification.
This is to help keep us sane when debugging problems "in the wild,"
and I'm sure we will add more to it over time (checksum, etc).
For example, after an up, you can now see this in `pulumi stack`:
```
Current stack is demo:
Last updated at 2017-12-01 13:48:49.815740523 -0800 PST
Pulumi version v0.8.3-79-g1ab99ad
Plugin pulumi-provider-aws [resource] version v0.8.3-22-g4363e77
Plugin pulumi-langhost-nodejs [language] version v0.8.3-79-g77bb6b6
Checkpoint file is /Users/joeduffy/dev/code/src/github.com/pulumi/pulumi-aws/.pulumi/stacks/webserver/demo.json
```
This addresses pulumi/pulumi#628.
This lets us disable integrity checking in case the tool refuses to
proceed and we want to force it, for use as a last resort. Someday
we'll probably flip the polarity to --enable-integrity-checking if
we find that checking takes too long (or maybe add a "quick" option).
This change introduces automatic integrity checking for snapshots.
Hopefully this will help us track down what's going on in
pulumi/pulumi#613. Eventually we probably want to make this opt-in,
or disable it entirely other than for internal Pulumi debugging, but
until we add more complete DAG verification, it's relatively cheap
and is worthwhile to leave on for now.
This PR just wires the `Package.Main` field to the Pulumi Service (and in subsequent PRs, the `pulumi-service` and `pulumi-ppc` repos).
@joeduffy , should we just upload the entire `package.Package` type with the `UpdateProgramRequest` type? I'm not sure we want to treat that type as part of part of our public API surface area. But on the other hand, we'll need to mirror relevant fields in N places if we don't.
Previously, we were inconsistent on how we handled argument validation
in the CLI. Many commands used cobra.Command's Args property to
provide a validator if they took arguments, but commands which did not
rarely used cobra.NoArgs to indicate this.
This change does two things:
1. Introduce `cmdutil.ArgsFunc` which works like `cmdutil.RunFunc`, it
wraps an existing cobra type and lets us control the behavior when an
arguments validator fails.
2. Ensure every command sets the Args property with an instance of
cmdutil.ArgsFunc. The cmdutil package defines wrapers for all the
cobra validators we are using, to prevent us from having to spell out
`cmduitl.ArgsFunc(...)` everywhere.
Fixes#588
This change simplifies the necessary RPC changes for components.
Instead of a Begin/End pair, which complicates the whole system
because now we have the opportunity of a missing End call, we will
simply let RPCs come in that append outputs to existing states.
We need to invoke the post-step event hook *after* updating the
state snapshots, so that it will write out the updated state.
We also need to re-serialize the snapshot again after we receive
updated output properties, otherwise they could be missing if this
happens to be the last resource (e.g., as in Stacks).