* Initialize a new stack as part of `pulumi new`
* Prompt for values with defaults preselected
* Install dependencies
* Prompt for default config values
This changes the CLI interface in a few ways:
* `pulumi preview` is back! The alternative of saying
`pulumi update --preview` just felt awkward, and it's a common
operation to want to perform. Let's just make it work.
* There are two flags consistent across all update commands,
`update`, `refresh`, and `destroy`:
- `--skip-preview` will skip the preview step. Note that this
does *not* skip the prompt to confirm that you'd like to proceed.
Indeed, it will still prompt, with a little warning text about
the fact that the preview has been skipped.
* `--yes` will auto-approve the updates.
This lands us in a simpler and more intuitive spot for common scenarios.
I found the flag --force to be a strange name for skipping a preview,
since that name is usually reserved for operations that might be harmful
and yet you're coercing a tool to do it anyway, knowing there's a chance
you're going to shoot yourself in the foot.
I also found that what I almost always want in the situation where
--force was being used is to actually just run a preview and have the
confirmation auto-accepted. Going straight to --force isn't the right
thing in a CI scenario, where you actually want to run a preview first,
just to ensure there aren't any issues, before doing the update.
In a sense, there are four options here:
1. Run a preview, ask for confirmation, then do an update (the default).
2. Run a preview, auto-accept, and then do an update (the CI scenario).
3. Just run a preview with neither a confirmation nor an update (dry run).
4. Just do an update, without performing a preview beforehand (rare).
This change enables all four workflows in our CLI.
Rather than have an explosion of flags, we have a single flag,
--preview, which can specify the mode that we're operating in. The
following are the values which correlate to the above four modes:
1. "": default (no --preview specified)
2. "auto": auto-accept preview confirmation
3. "only": only run a preview, don't confirm or update
4. "skip": skip the preview altogether
As part of this change, I redid a bit of how the preview modes
were specified. Rather than booleans, which had some illegal
combinations, this change introduces a new enum type. Furthermore,
because the engine is wholly ignorant of these flags -- and only the
backend understands them -- it was confusing to me that
engine.UpdateOptions stored this flag, especially given that all
interesting engine options _also_ accepted a dryRun boolean. As of
this change, the backend.PreviewBehavior controls the preview options.
The `go-git` implementation of `git status` is outrageously expensive,
as it performs a hash-based comparision of the working tree against the
committed state with no caching. In some example runs, this takes
upwards of 15 seconds. Because this is on the startup path for updates,
this results in a rather poor user experience.
These changes replace the `go-git` implementation with a call to `git
status --porcelain -z`, which only writes data to stdout if the working
tree is dirty.
Note that these changes also make all git-related update metadata
best-effort.
These changes add a new flag to the CLI, `--profiling`, that enables
CPU and heap profiling as well as execution tracing of the CLI itself.
The argument to this flag serves as a prefix for the profile outputs;
the CPU and heap profiles and execution trace are written to
`[filename].[pid].{cpu,mem,trace}`, respectively.
These changes also fix an issue with `cmdutil.RunFunc` wherein any error
would prevent the command's post-run hooks from executing.
We already have a great history viewing experience on
Pulumi.com. `pulumi history` in the CLI today is basically unuseable,
and instead of working on trying to improve it, let's just remove it
for now.
Fixes#965
This change adds two new (hidden) CLI commands:
* `gen-bash-completion`: This command generates a bash completion
script for the CLI, storing it in the file specified by the 1st arg.
This fixespulumi/pulumi#1172.
* `gen-markdown`: This command generates a directory of Markdown files,
one per command, documenting the CLI commands and their usage.
I originally did these as separate scripts that we can use in our
build processes, but it was actually even easier to make `pulumi` able
to generate them for itself. The nice part about this is that we don't
even need to bundle additional assets in order to distribute e.g. the
bash completion scripts, we can simply tell people to run
$ pulumi gen-bash-completion /etc/bash_completion.d/pulumi
This can also be used in our upcoming Brew installer.
Pat ran into a weird error when trying to do some development agains
the testing cloud:
```
$ pulumi logout
$ pulumi login --cloud-url [test-cloud-url]
Logged into [test-cloud-url]
$ pulumi stack ls
Enter your Pulumi access token from https://pulumi.com/account:
```
In his case, we did not have `current` set in our credentials.json
file (likely due to him calling `pulumi logout` at some point) but we
did have stored credentials for that cloud. When he logged in the CLI
noticed we could reuse the stored credentials but did not update the
the current setting to set the current cloud.
While investigating, I also noticed that `logout` did not always do
the right thing when you were logged into a different backend than
pulumi.com
* Refactor the SnapshotManager interface
Lift snapshot management out of the engine by delegating it to the
SnapshotManager implementation in pkg/backend.
* Add a event interface for plugin loads and use that interface to record plugins in the snapshot
* Remove dead code
* Add comments to Events
* Add a number of tests for SnapshotManager
* CR feedback: use a successful bit on 'End' instead of having a separate 'Abort' API
* CR feedback
* CR feedback: register plugins one-at-a-time instead of the entire state at once
- Show Emojis on non-Windows platforms, instead of just macOS
- Change help text for `pulumi logs` to clarify the logs are specific
to a stack, not a project
- Display stack name when showing logs
- Have preamble text show to users for engine operations read a little
nicer
PPCs are no longer a central concept to our model, but instead a
feature that that pulumi.com provides to some organizations. Let's
remove most mentions of PPCs except for cases where we really need to
talk about them (e.g. when a stack is actually hosted in a PPC instead
of just via the normal pulumi.com service)
Also remove some "in the Pulumi Cloud" messages from the CLI, as using
the Pulumi Cloud is now the only real way to use pulumi.
Fixespulumi/pulumi-service#1117
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This command cancels a stack's currently running update, if any. It can
be used to recover from the scenario in which an update is aborted
without marking the running update as complete. Once an update has been
cancelled, it is likely that the affected stack will need to be repaired
via an pair of export/import commands before future updates can succeed.
This is part of #1077.
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...
This change introduces support for using the cloud backend when
`pulumi init` has not been run. When this is the case, we use the new
identity model, where a stack is referenced by an owner and a stack
name only.
There are a few things going on here:
- We add a new `--owner` flag to `pulumi stack init` that lets you
control what account a stack is created in.
- When listing stacks, we show stacks owned by you and any
organizations you are a member of. So, for example, I can do:
* `pulumi stack init my-great-stack`
* `pulumi stack init --owner pulumi my-great-stack`
To create a stack owned by my user and one owned by my
organization. When `pulumi stack ls` is run, you'll see both
stacks (since they are part of the same project).
- When spelling a stack on the CLI, an owner can be optionally
specified by prefixing the stack name with an owner name. For
example `my-great-stack` means the stack `my-great-stack` owned by
the current logged in user, where-as `pulumi/my-great-stack` would
be the stack owned by the `pulumi` organization
- `--all` can be passed to `pulumi stack ls` to see *all* stacks you
have access to, not just stacks tied to the current project.
Long term, a stack name alone will not be sufficent to address a
stack. Introduce a new `backend.StackReference` interface that allows
each backend to give an opaque stack reference that can be used across
operations.
This change removes the need to `pulumi init` when targeting the local
backend. A fair amount of the change lays the foundation that the next
set of changes to stop having `pulumi init` be used for cloud stacks
as well.
Previously, `pulumi init` logically did two things:
1. It created the bookkeeping directory for local stacks, this was
stored in `<repository-root>/.pulumi`, where `<repository-root>` was
the path to what we belived the "root" of your project was. In the
case of git repositories, this was the directory that contained your
`.git` folder.
2. It recorded repository information in
`<repository-root>/.pulumi/repository.json`. This was used by the
cloud backend when computing what project to interact with on
Pulumi.com
The new identity model will remove the need for (2), since we only
need an owner and stack name to fully qualify a stack on
pulumi.com, so it's easy enough to stop creating a folder just for
that.
However, for the local backend, we need to continue to retain some
information about stacks (e.g. checkpoints, history, etc). In
addition, we need to store our workspace settings (which today just
contains the selected stack) somehere.
For state stored by the local backend, we change the URL scheme from
`local://` to `local://<optional-root-path>`. When
`<optional-root-path>` is unset, it defaults to `$HOME`. We create our
`.pulumi` folder in that directory. This is important because stack
names now must be unique within the backend, but we have some tests
using local stacks which use fixed stack names, so each integration
test really wants its own "view" of the world.
For the workspace settings, we introduce a new `workspaces` directory
in `~/.pulumi`. In this folder we write the workspace settings file
for each project. The file name is the name of the project, combined
with the SHA1 of the path of the project file on disk, to ensure that
multiple pulumi programs with the same project name have different
workspace settings.
This does mean that moving a project's location on disk will cause the
CLI to "forget" what the selected stack was, which is unfortunate, but
not the end of the world. If this ends up being a big pain point, we
can certianly try to play games in the future (for example, if we saw
a .git folder in a parent folder, we could store data in there).
With respect to compatibility, we don't attempt to migrate older files
to their newer locations. For long lived stacks managed using the
local backend, we can provide information on where to move things
to. For all stacks (regardless of backend) we'll require the user to
`pulumi stack select` their stack again, but that seems like the
correct trade-off vs writing complicated upgrade code.
Upcoming work to remove the need for `pulumi init` makes testing the
upgrade code much harder than it did in the past (since workspace data
is moving to a different location on the file system, as well as some
other changes).
Instead of trying to maintain the code and test, let's just remove
it. Folks who haven't migrated (LM and the PPC deployment in the
service) should use the 0.11.3 or earlier CLI to migrate their
projects (simply by logging in and running a pulumi command) or move
things forward by hand.
This field indicates the schema of the serialized deployment. This field
behaves identically to the `Version` field of
`PatchUpdateCheckpointRequest`.
This is part of pulumi/pulumi-service#1046
We already had logic to skip prompting a user to create a stack,
when a stack-specific command was run but none was found, but we
only heeded it in one of two cases. This fixes the other case.
To help us diagnose various issues -- and also just as a nice status
reporting thing -- we'll add a --verbose flag to the pulumi plugin
install command. This will get used in the package scripts.
We have some code that deals with upgrading legacy projects (which had
workspace level configuration) to the new format where configuration
information was stored SxS with the application.
This code requires us to get a list of stacks from the backend (which
for hosted stacks means hitting api.pulumi.com) as part of the upgrade
process, so we knew all the stacks the user's project has. This is a
somewhat slow operation (which we will make faster regardless) but we
can structure things such that we don't need to do this often.
In the common case, we don't need to actually do upgrading at
all (new projects won't need it and once a project is upgraded that
project won't need it either) so update the code first to check if we
would need to do any work and if so, do the expensive operation of
getting stacks from a backend.
This should help with the slight pauses we've seen on the command line
since the work to default to folks logging in has landed.
The code that calculated plugin sizes was incorrect; it would show the
total size consumed by all plugins, for each plugin, which is clearly
busted. We should compute each plugin's size from its own directory.
This clashes with the existing --emoji/-e flag for the pulumi-wide
flags. I doubt --exact is going to be very common, so rather than
trying to invent a shorthand for it, we can just support the long form.
This change lets plugin versions to float in two ways:
1) If a `pulumi plugin install` detects a newer version is available
already, there's no need to download and install the older version.
2) If the engine attempts to load a plugin at a particular version,
if a newer version is available, it will be accepted without error.
As part of this, we permit $PATH to have the final say when determining
which version to accept. That is, it can always override the choice.
Note that I highly suspect, in the limit, that we'll want to stop doing
this for major version incompatibilities. For now, since we don't
envision any such version changes imminently, this will suffice.
This change does three major things:
1. Removes the ability to be logged into multiple clouds at the same
time. Previously, we supported being logged into multiple clouds at
the same time and the CLI would fan out requests and join responses
when needed. In general, this was only useful for Pulumi employees
that wanted run against multiple copies of the service (say production
and staging) but overall was very confusing (for example in the old
world a stack with the same identity could appear twice (since it was
in two backends) which the CLI didn't handle very well).
2. Stops treating the "local" backend as a special thing, from the
point of view of the CLI. Previouly we'd always connect to the local
backend and merge that data with whatever was in clouds we were
connected to. We had gestures like `--local` in `pulumi stack init`
that meant "use the local mode". Instead, to use the local mode now
you run `pulumi login --cloud-url local://` and then you are logged in
the local backend. Since you can only ever be logged into a single
backend, we can remove the `--local` and `--remote` flags from `pulumi
stack init`, it just now requires you to be logged in and creates a
stack in whatever back end you were logged into. When logging into the
local backend, you are not prompted for an access key.
3. Prompt for login in places where you have to log in, if you are not
already logged in.
Tests now target managed stacks instead of local stacks.
The existing logged in user and target backend API are used unless PULUMI_ACCES_TOKEN is defined, in which case tests are run under that access token and against the PULUMI_API backend.
For developer machines, we will now need to be logged in to Pulumi to run tests, and whichever default API backend is logged in (the one listed as current in ~/.pulumi/credentials.json) will be used. If you need to override these, provide PULUMI_ACCESS_TOKEN and possibly PULUMI_API.
For Travis, we currently target the staging service using the Pulumi Bot user.
We have decided to run tests in the pulumi organization. This can be overridden for local testing (or in Travis in the future) by defining PULUMI_API_OWNER_ORGANIZATION and using an access token with access to that organization.
Part of pulumi/home#195.
This change includes a bunch of refactorings I made in prep for
doing refresh (first, the command, see pulumi/pulumi#1081):
* The primary change is to change the way the engine's core update
functionality works with respect to deploy.Source. This is the
way we can plug in new sources of resource information during
planning (and, soon, diffing). The way I intend to model refresh
is by having a new kind of source, deploy.RefreshSource, which
will let us do virtually everything about an update/diff the same
way with refreshes, which avoid otherwise duplicative effort.
This includes changing the planOptions (nee deployOptions) to
take a new SourceFunc callback, which is responsible for creating
a source specific to the kind of plan being requested.
Preview, Update, and Destroy now are primarily differentiated by
the kind of deploy.Source that they return, rather than sprinkling
things like `if Destroying` throughout. This tidies up some logic
and, more importantly, gives us precisely the refresh hook we need.
* Originally, we used the deploy.NullSource for Destroy operations.
This simply returns nothing, which is how Destroy works. For some
reason, we were no longer doing this, and instead had some
`if Destroying` cases sprinkled throughout the deploy.EvalSource.
I think this is a vestige of some old way we did configuration, at
least judging by a comment, which is apparently no longer relevant.
* Move diff and diff-printing logic within the engine into its own
pkg/engine/diff.go file, to prepare for upcoming work.
* I keep noticing benign diffs anytime I regenerate protobufs. I
suspect this is because we're also on different versions. I changed
generate.sh to also dump the version into grpc_version.txt. At
least we can understand where the diffs are coming from, decide
whether to take them (i.e., a newer version), and ensure that as
a team we are monotonically increasing, and not going backwards.
* I also tidied up some tiny things I noticed while in there, like
comments, incorrect types, lint suppressions, and so on.
These changes refactor direct interactions with the Pulumi API out of
the cloud backend and into a subpackage, `pkg/backend/cloud/client`.
This package exposes a slightly higher-level API that takes care of
calculating paths, performing HTTP calls, and occasionally wrapping
multiple physical calls into a single logical call (notably the creation
of an update and the upload of its program).
This is primarily intended as preparation for some of the changes
suggested in the feedback for #1067.