* Added dist target for make, will help with Homebrew
* Try to install go dependencies before building
* Make sure dep ensure is called before trying to build SDKs
* Removed dep ensure from dist initial step
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
When this argument is not provided, we'll default to the value of
pulumi.getProject(). This is what you want for application level code
anyway and it matches the CLI behavior where if you don't qualify a
key with a package we use the name of the current project.
Fixes#1581
The pulumi runtime used to lazily load and parse both config and
settings data set by the language host. The initial reason for this
design was that we wanted the runtime to be usable in a normal node
environment, but we have moved away from supporting that.
In addition, while we claimed we loaded these value "lazily", we
actually forced their loading quite eagerly when we started
up. However, when capturing config (or settings, as we now do), we
would capture all the logic about loading these values from the
environment.
Even worse, in the case where you had two copies of @pulumi/pulumi
loaded, it would be possible to capture a config object which was not
initialized and then at runtime the initialization logic would try to
read PULUMI_CONFIG from the process environment and fail.
So we adopt a new model where configuration and settings are parsed as
we load their containing modules. In addition, to support SxS
scinerios, we continue to use `process.env` as a way to control both
configuration and settings. This means that `run.ts` must now ensure
that these values are present in the environment before either the
config or runtime modules have been loaded.
Set the following compiler defaults:
```
"target": "es6",
"module": "commonjs",
"moduleResolution": "node",
"sourceMap": true,
```
Which allows us to not even include a tsconfig.json file. If one is
present, `ts-node` will use its options, but the above settings will
override any settings in a local tsconfig.json file. This means if you
want full control over the target, you'll need to go back to the raw
tsc workflow where you explicitly build ahead of time.
This change lets us set runtime specific options in Pulumi.yaml, which
will flow as arguments to the language hosts. We then teach the nodejs
host that when the `typescript` is set to `true` that it should load
ts-node before calling into user code. This allows using typescript
natively without an explicit compile step outside of Pulumi.
This works even when a tsconfig.json file is not present in the
application and should provide a nicer inner loop for folks writing
typescript (I'm pretty sure everyone has run into the "but I fixed
that bug! Why isn't it getting picked up? Oh, I forgot to run tsc"
problem.
Fixes#958
I tried to re-generate the Protobuf/gRPC files, but generate.sh seems to
have assumed I manually built the Dockerfile ahead-of-time (unless I'm
missing something -- very possible). Unfortunately, when I went to do
that, I ended up with a handful of errors, most of them due to
differences in versions. (We probably want to think about pinning them.)
To remedy both issues, I've fixed up the Dockerfile so that it works for
me at least, and added a build step to the front of generate.sh.
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
When a resource fails to initialize (i.e., it is successfully created,
but fails to transition to a fully-initialized state), and a user
subsequently runs `pulumi update` without changing that resource, our
CLI will fail to warn the user that this resource is not initialized.
This commit begins the process of allowing our CLI to report this by
storing a list of initialization errors in the checkpoint.
* Revert "Parallelize much more of resource creation in the JS language provider SDK (#1618)"
This reverts commit 4edd244a26.
* Revert "Process our async-work-queue in parallel. (#1619)"
This reverts commit b8c1cb9574.
This commit adds CLI support for resource providers to provide partial
state upon failure. For resource providers that model resource
operations across multiple API calls, the Provider RPC interface can now
accomodate saving bags of state for resource operations that failed.
This is a common pattern for Terraform-backed providers that try to do
post-creation steps on resource as part of Create or Update resource
operations.
A critical part of the partial update protocol is to return a structured
error when a resource is successfully created, but fails to initialize.
This structured error contains the properties of the
partially-initialized resource, and instructs the engine to halt.
Most languages implement this by attaching "details" to the error, i.e.,
an arbitrary proto message attached to the error. The JavaScript
implementation is not mature enough to include all the facilities
required to use this, so here we must add a `Status` message, which
protobuf requires as part of its structure for returning details.
* Test the Python language host end-to-end
This commit introduces an end-to-end language host testing framework for
the Python SDK, similar to what already exists for the Node SDK. The
real language host is used to run Pulumi programs written in Python
while mocking out the resource monitor.
* Add new tests
* Print out better diagnostics when the langhost fails to launch
* Use the in-tree executor for testing
* CR: Place tests and code being tested in the same directory for ease of understanding, add a README
* Turns out I misunderstood the semantics of resource registration - fix two tests so that they pass now and fix a few bugs in the test harness