The two-phase output properties change broke the ability to recover
from a failed replacement that yields pending deletes in the checkpoint.
The issue here is simply that we should remember pending registrations
only for logical operations that *also* have a "new" state (create or
update). This commit fixes this, and also adds a new step test with
fault injection to probe many interesting combinations of steps.
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
This PR just wires the `Package.Main` field to the Pulumi Service (and in subsequent PRs, the `pulumi-service` and `pulumi-ppc` repos).
@joeduffy , should we just upload the entire `package.Package` type with the `UpdateProgramRequest` type? I'm not sure we want to treat that type as part of part of our public API surface area. But on the other hand, we'll need to mirror relevant fields in N places if we don't.
The first exception relates to how we launch plugins. Plugin paths are
calculated using a well-known set of rules; this makes `gas` suspicious
due to the need to use a variable to store the path of the plugin.
The second and third are in test code and aren't terribly concerning.
The latter exception asks `gas` to ignore the access key we hard-code
into the integration tests for our Pulumi test account.
The fourth exception allows use to use more permissive permissions for
the `.pulumi` directory than `gas` would prefer. We use `755`; `gas`
wants `700` or stricter. `755` is the default for `mkdir` and `.git` and
so seems like a reasonable choice for us.
By default, debugging events are not displayed by `pulumi`; the `-d`
flag must be provided to enable their display. This is necessary e.g.
to view debugging output from Terraform when TF logging is enabled.
These changes add the option to display debug output from `pulumi` to
the integration test framework.
These changes also contain a small fix for the display of component
children.
A handful of UX improvments for config:
- `pulumi config ls` has been removed. Now, `pulumi config` with no
arguments prints the table of configuration values for a stack and
a new command `pulumi config get <key>` prints the value for a
single configuration key (useful for scripting).
- `pulumi config text` and `pulumi config secret` have been merged
into a single command `pulumi config set`. The flag `--secret` can
be used to encrypt the value we store (like `pulumi config secret`
used to do).
- To make it obvious that setting a value with `pulumi config set` is
in plan text, we now echo a message back to the user saying we
added the configuration value in plaintext.
Fixes#552
This change fixes getProject to return the project name, as
originally intended. (One line was missing.)
It also adds an integration test for this.
Fixespulumi/pulumi#580.
Because the Pulumi.yaml file demarcates the boundary used when
uploading a program to the Pulumi.com service at the moment, we
have trouble when a Pulumi program uses "up and over" references.
For instance, our customer wants to build a Dockerfile located
in some relative path, such as `../../elsewhere/`.
To support this, we will allow the Pulumi.yaml file to live
somewhere other than the main Pulumi entrypoint. For example,
it can live at the root of the repo, while the Pulumi program
lives in, say, `infra/`:
Pulumi.yaml:
name: as-before
main: infra/
This fixespulumi/pulumi#575. Further work can be done here to
provide even more flexibility; see pulumi/pulumi#574.
Add the ability to upload data and timing for test runs to S3. Uploaded data is designed to be queried via a service like AWS Athena and these queries can then be imported into BI tools (Excel, QuickSight, PowerBI, etc.)
Initially hook this up to the `minimal` test as a baseline.
We are not ready to start running integration tests against
Pulumi.com, but `pulumi` uses `PULUMI_API` to decide what backend to
target. Remove it when running `pulumi` in the integration tests so we
always get the local behavior.
pulumi/pulumi#471 tracks the work to actually be able to choose what
backend you want when an integration test runs.
This changes the overall flow to exit early when a failure occurs.
We will try to clean up if we believe to have gotten far enough to
actually have provisioned any resources.
This PR adds integration tests for exercising `pulumi init` and the `pulumi stack *` commands. The only functional change is merging in https://github.com/pulumi/pulumi/pull/492 , which I found while writing the tests and (of course 😁 ) wrote a regression for.
To do this I introduce a new test driver called `PulumiProgram`. This is different from the one found in the `testing/integration`package in that it doesn't try to prescribe a workflow. It really just deals in executing commands, and confirming strings are in the output.
While it doesn't hurt to have more tests for `pulumi`, my motivation here was so that I could reuse these to ensure I keep the same behavior for my pending PR that implements Cloud-enabled variants of some of these commands.
This adds a minimal runtime verification test to our basic
test suite, to at least exercise the portions of the integration
test library that load up and parse checkpoint files.
Now, instead of having a .pulumi folder next to each project, we have
a single .pulumi folder in the root of the repository. This is created
by running `pulumi init`.
When run in a git repository, `pulumi init` will place the .pulumi
file next to the .git folder, so it can be shared across all projects
in a repository. When not in a git repository, it will be created in
the current working directory.
We also start tracking information about the repository itself, in a
new `repo.json` file stored in the root of the .pulumi folder. The
information we track are "owner" and "name" which map to information
we use on pulumi.com.
When run in a git repository with a remote named origin pointing to a
GitHub project, we compute the owner and name by deconstructing
information from the remote's URL. Otherwise, we just use the current
user's username and the name of the current working directory as the
owner and name, respectively.
We now encrypt secrets at rest based on a key derived from a user
suplied passphrase.
The system is designed in a way such that we should be able to have a
different decrypter (either using a local key or some remote service
in the Pulumi.com case in the future).
Care is taken to ensure that we do not leak decrypted secrets into the
"info" section of the checkpoint file (since we currently store the
config there).
In addtion, secrets are "pay for play", a passphrase is only needed
when dealing with a value that's encrypted. If secure config values
are not used, `pulumi` will never prompt you for a
passphrase. Otherwise, we only prompt if we know we are going to need
to decrypt the value. For example, `pulumi config <key>` only prompts
if `<key>` is encrypted and `pulumi deploy` and friends only prompt if
you are targeting a stack that has secure configuration assoicated
with it.
Secure values show up as unecrypted config values inside the language
hosts and providers.
When `PULUMI_RETAIN_CHECKPOINTS` is set in the environment, also write
the checkpoint file to <stack-name>.<ext>.<timestamp>.
This ensures we have historical information about every snapshot, which
would aid in debugging issues like #451. We set this to true for our
integration tests.
Fixes#453
Now that config is stored in Pulumi.yaml, we need to mimic the behavior
around .pulumi/ while edits are applied. This will ensure that config
values carry forward from the original program settings.
This fixespulumi/pulumi-aws#48.
In #411 we started to run tests in parallel again. To support that, we
added a .yarnrc file in the root of our repository to pass --mutex
network to all yarn invocations, because tests may run yarn commands
concurrently with one another and yarn is not safe to run
concurrently.
However, when we run the integration tests, we actually copy them into
a folder under `/tmp` and so yarn's logic to walk up the directory to
tree to find a `.yarnrc` will not see this `.yarnrc` and we're back
where we started.
Have the testing package explicitly write this file, which should
prevent this issue from happening in the future.
Previously we used the word "Environment" as the term for a deployment
target, but since then we've started to use the term Stack. Adopt this
across the CLI.
From a user's point of view, there are a few changes:
1. The `env` verb has been renamed to `stack`
2. The `-e` and `--env` options to commands which operate on an
environment now take `-s` or `--stack` instead.
3. Becase of (2), the commands that used `-s` to display a summary now
only support passing the full option name (`--summary`).
On the local file system, we still store checkpoint data in the `env`
sub-folder under `.pulumi` (so we can reuse existing checkpoint files
that were written to the old folder)
This let's you set things like YARNFLAGS==--offline which is helpful
when you are on an airplane. Yarn can still pick up stuff that you had
pulled down recently from its local cache
This includes a few changes:
* The repo name -- and hence the Go modules -- changes from pulumi-fabric to pulumi.
* The Node.js SDK package changes from @pulumi/pulumi-fabric to just pulumi.
* The CLI is renamed from lumi to pulumi.
This makes a few tweaks to get the integration tests passing:
* Add `runtime: nodejs` to the minimal example's `Lumi.yaml` file.
* Remove usage of `@lumi/lumirt { printf }` and just use `console.log`.
* Remove calls to `lumijs` in the integration test framework and
the minimal example's package.json. Instead, we just run
`yarn run build`, which itself internally just invokes `tsc`.
* Add package validation logic and eliminate the pkg/compiler/metadata
library, in favor of the simpler code in pkg/engine.
* Simplify the Node.js langhost plugin CLI, and simply take an
argument rather than requiring required and optional --flags.
* Use a default path of "." if the program path isn't provided. This
is a legal scenario if you've passed a pwd and just want to load
the package's default module ("./index.js" or whatever main says).
* Add an executable script, lumi-langhost-nodejs, that fires up the
`bin/cmd/langhost/index.js` file to serve the Node.js language plugin.
Adds an `ExtraRuntimeValidation` hook to the test harness.
This runs after the test app is deployed, and can be used to test publically
exposed endpoints on the example to validate additional runtime correctness
of the Lumi app under test.
This change tests that a plan and deploy immediately following another
deploy, when no edits have taken place, correctly results in no action.
I also cleaned up a few things in the code, like using fmt.Printf rather
than fmt.Fprintf(os.Stdout, ...), to clean up error paths, giving the
package a slightly shorter name, and adding missing copyright headers.
This is part of pulumi/pulumi-fabric#310.