* Don't show stack outputs when update fails
It is basically guaranteed that stack outputs are going to be
meaningless if a plan fails, so this commmit doesn't display them if an
error has occured.
* CR: expand on comment
We signal provider cancellation by hangning a goroutine off of the plan
executor's parent context. To ensure clean shutdown, this goroutine also
listens on a channel that closes once the plan has finished executing.
Unfortunately, we were closing this channel too early, and the close was
racing with the cancellation signal. These changes ensure that the
channel closes after the plan has fully completed.
Fixes#1906.
Fixespulumi/pulumi-kubernetes#185.
* Validate type tokens before using them
When registering or reading a resource, we take the type token given to
us from the language host and assume that it's valid, which resulted in
assertion failures in various places in the engine. This commit
validates the format of type tokens given to us from the language host
and issues an appropriate error if it's not valid.
Along the way, this commit also improves the way that fatal exceptions
are rendered in the Node language host.
* Pre-allocate an exception for ReadResource
* Fix integration test
* CR Feedback
This commit is a lower-impact change that fixes the bugs associated with
invalid types on component resources and only checks that a type is
valid on custom resources.
* CR Take 2: Fix up IsProviderType instead of fixing call sites
* Please gometalinter
It is possible for the inputs of a "same" resource to have changed even
if the contents of the input bags are different if the resource's
provider deems the physical change to be semantically irrelevant.
Previously `new` was operating under the assumption that it was always
going to be creating a new project/stack, and would always prompt for
these values. However, we want to be able to use `new` to pull down the
source for an existing stack. This change adds a `--stack` flag to `new`
that can be used to specify an existing stack. If the specified stack
already exists, we won't prompt for the project name/description, and
instead just use the existing stack's values. If `--stack` is specified,
but doesn't already exist, it will just use that as the stack name
(instead of prompting) when creating the stack. `new` also now handles
configuration like `up <url>`: if the stack is a preconfigured empty
stack (i.e. it was created/configured in the Pulumi Console via Pulumi
Button or New Project), we will use the existing stack's config without
prompting. Otherwise we will prompt for config, and just like `up
<url>`, we'll use the existing stack's config values as defaults when
prompting, or if the stack didn't exist, use the defaults from the
template.
Previously `up <url>`'s handling of the project name/description wasn't
correct: it would always automatically use the values from the template
without prompting. Now, just like `new`:
- When updating an existing stack, it will not prompt, and just use the
existing stack's values.
- When creating a new stack, it will prompt for the project
name/description, using the defaults from the template.
This PR consolidates some of the `new`/`up` implementation so it shares
code for this functionality. There's definitely opportunities for a lot
more code reuse, but that cleanup can happen down the line if/when we
have the cycles.
* Don't close eventChannel when panicking
The state of the system is completely unknown when panicking and in
general it's not safe to infer whether or not it is safe to close a
channel when in this tate.
* CR feedback
* Spelling
* Introduce Result type to engine
The Result type can be used to signal the failure of a computation due
to both internal and non-internal reasons. If a computation failed due
to an internal error, the Result type carries that error with it and
provides it when the 'Error' method on a Result is called. If a
computation failed gracefully, but wished to bail instead of continue a
doomed plan, the 'Error' method provides a value of null.
* CR feedback
We generally want examples and apps to be authored such that they are
clonable/deployable as-is without using new/up (and want to
encourage this). That means no longer using the ${PROJECT} and
${DESCRIPTION} replacement strings in Pulumi.yaml and other text files.
Instead, good default project names and descriptions should be specified
in Pulumi.yaml and elsewhere.
We'll use the specified values as defaults when prompting the user, and
then directly serialize/save the values to Pulumi.yaml when configuring
the user's project. This does mean that name in package.json (for nodejs
projects) won't be updated if it isn't using ${PROJECT}, but that's OK.
Our templates in the pulumi/templates repo will still use
${PROJECT}/${DESCRIPTION} for now, to continue to work well with v0.15
of the CLI. After that version is no longer in use, we can update the
templates to no longer use the replacement strings and delete the code
in the CLI that deals with it.
This change implements the same preview behavior we have for
cloud stacks, in pkg/backend/httpbe, for local stacks, in
pkg/backend/filebe. This mostly required just refactoring bits
and pieces so that we can share more of the code, although it
does still entail quite a bit of redundancy. In particular, the
apply functions for both backends are now so close to being
unified, but still require enough custom logic that it warrants
keeping them separate (for now...)
This simply refactors all the display logic out of the
pkg/backend/filestate package. This helps to gear us up to better unify
this logic between the filestate and httpstate backends.
Furthermore, this really ought to be in its own non-backend,
CLI-specific package, but I'm taking one step at a time here.
This change alters the login prompt slightly, so that it is more
obvious that alternative methods exist.
Before this change, we would say:
$ pulumi login
We need your Pulumi account to identify you.
Enter your access token from https://app.pulumi.com/account
or hit <ENTER> to log in using your browser :
After this change, we say this instead:
$ pulumi login
Manage your Pulumi stacks by logging in.
Run `pulumi login --help` for alternative login options.
Enter your access token from https://app.pulumi.com/account
or hit <ENTER> to log in using your browser :
Also updated the help text to advertise this a bit more prominently.
This renames the backend packages to more closely align with the
new direction for them. Namely, pkg/backend/cloud becomes
pkg/backend/httpstate and pkg/backend/local becomes
pkg/backend/filestate. This also helps to clarify that these are meant
to be around state management and so the upcoming refactoring required
to split out (e.g.) the display logic (amongst other things) will make
more sense, and we'll need better package names for those too.
As part of making the local backend more prominent, this changes a few
aspects of how you use it:
* Simplify how you log into a specific cloud; rather than
`pulumi login --cloud-url <url>`, just say `pulumi login <url>`.
* Use a proper URL scheme to denote local backend usage. We have chosen
file://, since the REST API backend is of course always https://.
This means that you can say `pulumi login file://~` to use the local
backend, with state files stored in your home directory. Similarly,
we support `pulumi login file://.` for the current directory.
* Add a --local flag to the login command, to make local logins a
bit easier in the common case of using your home directory. Just say
`pulumi login --local` and it is sugar for `pulumi login file://~`.
* Print the URL for the backend after logging in; for the cloud,
this is just the user's stacks page, and for the local backend,
this is the path to the user's stacks directory on disk.
* Tidy up the documentation for login a bit to be clearer about this.
This is part of pulumi/pulumi#1818.
The existing message put the URL to visit and some explanation text on
the same line, which makes it a little harder to copy only the URL
into a browser. If this extra text ends up being copied as well as the
URL it can lead to failures later, when we try to decode the query
string as part of the OAuth flow.
It's easy enough to fix by just putting the URL on its own line, split
off from the text itself.
Fixes#1832
This changes two things:
1) Per PR feedback, change the text to "N changes found during refresh."
2) Colorize the parenthetical "No resources will be modified" message;
it looked a little odd being plain colored.
This commit reverts most of #1853 and replaces it with functionally
identical logic, using the notion of status message-specific sinks.
In other words, where the original commit implemented ephemeral status
messages by adding an `isStatus` parameter to most of the logging
methdos in pulumi/pulumi, this implements ephemeral status messages as a
parallel logging sink, which emits _only_ ephemeral status messages.
The original commit message in that PR was:
> Allow log events to be marked "status" events
>
> This commit will introduce a field, IsStatus to LogRequest. A "status"
> logging event will be displayed in the Info column of the main
> display, but will not be printed out at the end, when resource
> operations complete.
>
> For example, for complex resource initialization, we'd like to display
> a series of intermediate results: [1/4] Service object created, for
> example. We'd like these to appear in the Info column, but not at the
> end, where they are not helpful to the user.
Previously, we only supported config keys that included a ':' delimiter
in config keys specified in the template manifest and in `-c` flags to
`new` and `up`. This prevented the use of project keys in the template
manifest and made it more difficult to pass such keys with `-c`,
effectively preventing the use of `new pulumi.Config()` in project code.
This change fixes this by allowing config keys that don't have a
delimiter in the template manifest and `-c` flags. In such cases, the
project name is automatically prepended behind the scenes, the same as
what `pulumi config set` does.
The pattern we are using here is generally prone to error, so I hope we find a way to move away from this more generally - but for now we need to be able to configure more of these in places we are using `With`.
Also remove some `+""` that are tripping up the linter for me locally.
- Create all refresh steps before issuing any. This is important as the
state update loop expects all steps to exist.
- Check for cancellation later in the refresher.
This also fixes races in the SnapshotManager and the test journal that
could cause panics during cancellation.
The wording for refresh doesn't accurately convey that the operations
aren't actually mutating your resources, but instead are simply changing
your checkpoint state. This change (hopefully) helps in two ways:
First, put text just before the prompt:
Do you want to perform this refresh?
No resources will be modified as part of this refresh; just your stack's state will be.
Second, alter the summary ever-so-slightly, from:
info: 2 changes performed:
~ 2 resources updated
3 resources unchanged
to:
info: 2 changes refreshed:
~ 2 resources updated
3 resources unchanged
This reads just slightly better, and removes any sense of panic I might
have otherwise had that my refresh just did something wrong.
As I was in here, since I had to pass UpdateKind information to new
places, I cleaned up the situation where we had three mostly-similar
enums (but which actually diverged) and several areas where we were
using untyped strings for this same information. Now there's just one.
This fixespulumi/pulumi#1551.
This commit will greatly improve the experience of dealing with partial
failures by simply re-trying to initialize the relevant resources on
every subsequent `pulumi up`, instead of printing a list of reasons the
resource had previously failed to initialize.
As motivation, consider our behavior in the following common, painful
scenario:
* The user creates a `Service` and a `Deployment`.
* The `Pod`s in the `Deployment` fail to become live. This causes the
`Service` to fail, since it does not target any live `Pod`s.
* The user fixes the `Deployment`. A run of `pulumi up` sees the
`Pod`s successfully initialize.
* Users will expect that the `Service` is now in a state of success,
as the `Pod`s it targets are alive. But, because we don't update the
`Service` by default, it perpetually exists in a state of error.
* The user is now required to change some trivial feature of the
`Service` just to trigger an update, so that we can see it succeed.
There are many situations like this. Another very common one is waiting
for test `Pod`s that are meant to successfully complete when some object
becomes live.
By triggering an empty update step for all resources that have any
initialization errors, we avoid all problems like this.
This commit will implement this empty-update semantics for partial
failures, as well as fix the display UX to correctly render the diff in
these cases.
Often when the test fails, you'll want to use the web console to
investigate the stack, looking at detailed log messages, for
example. But since we always delete the stack today, you often can't.
Stop running `pulumi stack rm` when the test fails, however do run a
`pulumi destroy` so we at least clean up any resources the stack may
have allocated during testing.
Fixes#1722
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
The fact that we include the `:config:` portion of a configuration
name when sending to the service is an artifact of history. It was
needed back when we needed to support deploying using a new CLI
against a PPC that had older packages embeded in it.
We don't have that sort of problem anymore, so we can stop sending
this data.
* Show a better error message when decrypting fails
It is most often the case that failing to decrypt a secret implies that
the secret was transferred from one stack to another via copying the
configuration. This commit introduces a better error message for this
case and instructs users to explicitly re-encrypt their encrypted keys
in the context of the new stack.
* Spelling
* CR: Grammar fixes
These changes simplify a couple aspects of plan execution in the hopes of
clarifying some responsibilities and preparing the code for changes to the
implementation of refresh.
1. All aspects of plan execution are now managed by the plan executor,
which is no longer exported. Instead, it is abstracted behind
`Plan.Execute`.
2. The plan executor's error-handling and reporting have been unified
and simplified somewhat.
* Log errors coming from the language host
Similar to pulumi/pulumi#1762, fixespulumi/pulumi#1775. The language
host can fail without issuing any diagnostics and it is very unclear
what happens if the engine does not log the error.
* CR feedback
A checkpoint write is unnecessary if it does not change the semantics of
the data currently stored in the checkpoint. We currently perform
unnecessary checkpoint writes in two cases:
- Same steps where no aspect of the resource's state has changed
- Replace steps, which exist solely for display purposes
The former case is particularly bothersome, as it is rather common to
run updates--especially in CI--that consist largely/entirely of these
same steps.
These changes eliminate the checkpoint writes we perform in these two
cases. Some care is needed to ensure that we continue to write the
checkpoint in the case of same steps that do represent meaningful
changes (e.g. changes to a resource's output properties or
dependencies).
Fixes#1769.
The glog package force the use of golang's underyling flag package,
which Cobra does not use. To work around this, we had a complicated
dance around defining flags in multiple places, calling flag.Parse
explicitly and then stomping values in the flag package with values we
got from Cobra.
Because we ended up parsing parts of the command line twice, each with
a different set of semantics, we ended up with bad UX in some
cases. For example:
`$ pulumi -v=10 --logflow update`
Would fail with an error message that looked nothing like normal CLI
errors, where as:
`$ pulumi -v=10 update --logflow`
Would behave as you expect. To address this, we now do two things:
- We never call flag.Parse() anymore. Wacking the flags with values we
got from Cobra is sufficent for what we care about.
- We use a forked copy of glog which does not complain when
flag.Parse() is not called before logging.
Fixes#301Fixes#710Fixes#968
1. 'readID' was never assigned to and was always the default value,
leading the refresh source to believe a resource was deleted
2. The refresh source could hang when a resource is deleted.
The plan executor assumed that the step generator was responsible for
logging its own diagnostics, which it sort-of is but also doesn't log a
majority of the diagnositcs that come out of it. This commit logs all
errors coming out of step generation so that we don't unintentionally
drop errors.
* Add a list of in-flight operations to the deployment
This commit augments 'DeploymentV2' with a list of operations that are
currently in flight. This information is used by the engine to keep
track of whether or not a particular deployment is in a valid state.
The SnapshotManager is responsible for inserting and removing operations
from the in-flight operation list. When the engine registers an intent
to perform an operation, SnapshotManager inserts an Operation into this
list and saves it to the snapshot. When an operation completes, the
SnapshotManager removes it from the snapshot. From this, the engine can
infer that if it ever sees a deployment with pending operations, the
Pulumi CLI must have crashed or otherwise abnormally terminated before
seeing whether or not an operation completed successfully.
To remedy this state, this commit also adds code to 'pulumi stack
import' that clears all pending operations from a deployment, as well as
code to plan generation that will reject any deployments that have
pending operations present.
At the CLI level, if we see that we are in a state where pending
operations were in-flight when the engine died, we'll issue a
human-friendly error message that indicates which resources are in a bad
state and how to recover their stack.
* CR: Multi-line string literals, renaming in-flight -> pending
* CR: Add enum to apitype for operation type, also name status -> type for clarity
* Fix the yaml type
* Fix missed renames
* Add implementation for lifecycle_test.go
* Rebase against master
* Initial support for passing URLs to `new` and `up`
This PR adds initial support for `pulumi new` using Git under the covers
to manage Pulumi templates, providing the same experience as before.
You can now also optionally pass a URL to a Git repository, e.g.
`pulumi new [<url>]`, including subdirectories within the repository,
and arbitrary branches, tags, or commits.
The following commands result in the same behavior from the user's
perspective:
- `pulumi new javascript`
- `pulumi new https://github.com/pulumi/templates/templates/javascript`
- `pulumi new https://github.com/pulumi/templates/tree/master/templates/javascript`
- `pulumi new https://github.com/pulumi/templates/tree/HEAD/templates/javascript`
To specify an arbitrary branch, tag, or commit:
- `pulumi new https://github.com/pulumi/templates/tree/<branch>/templates/javascript`
- `pulumi new https://github.com/pulumi/templates/tree/<tag>/templates/javascript`
- `pulumi new https://github.com/pulumi/templates/tree/<commit>/templates/javascript`
Branches and tags can include '/' separators, and `pulumi` will still
find the right subdirectory.
URLs to Gists are also supported, e.g.:
`pulumi new https://gist.github.com/justinvp/6673959ceb9d2ac5a14c6d536cb871a6`
If the specified subdirectory in the repository does not contain a
`Pulumi.yaml`, it will look for subdirectories within containing
`Pulumi.yaml` files, and prompt the user to choose a template, along the
lines of how `pulumi new` behaves when no template is specified.
The following commands result in the CLI prompting to choose a template:
- `pulumi new`
- `pulumi new https://github.com/pulumi/templates/templates`
- `pulumi new https://github.com/pulumi/templates/tree/master/templates`
- `pulumi new https://github.com/pulumi/templates/tree/HEAD/templates`
Of course, arbitrary branches, tags, or commits can be specified as well:
- `pulumi new https://github.com/pulumi/templates/tree/<branch>/templates`
- `pulumi new https://github.com/pulumi/templates/tree/<tag>/templates`
- `pulumi new https://github.com/pulumi/templates/tree/<commit>/templates`
This PR also includes initial support for passing URLs to `pulumi up`,
providing a streamlined way to deploy installable cloud applications
with Pulumi, without having to manage source code locally before doing
a deployment.
For example, `pulumi up https://github.com/justinvp/aws` can be used to
deploy a sample AWS app. The stack can be updated with different
versions, e.g.
`pulumi up https://github.com/justinvp/aws/tree/v2 -s <stack-to-update>`
Config values can optionally be passed via command line flags, e.g.
`pulumi up https://github.com/justinvp/aws -c aws:region=us-west-2 -c foo:bar=blah`
Gists can also be used, e.g.
`pulumi up https://gist.github.com/justinvp/62fde0463f243fcb49f5a7222e51bc76`
* Fix panic when hitting ^C from "choose template" prompt
* Add description to templates
When running `pulumi new` without specifying a template, include the template description along with the name in the "choose template" display.
```
$ pulumi new
Please choose a template:
aws-go A minimal AWS Go program
aws-javascript A minimal AWS JavaScript program
aws-python A minimal AWS Python program
aws-typescript A minimal AWS TypeScript program
> go A minimal Go program
hello-aws-javascript A simple AWS serverless JavaScript program
javascript A minimal JavaScript program
python A minimal Python program
typescript A minimal TypeScript program
```
* React to changes to the pulumi/templates repo.
We restructured the `pulumi/templates` repo to have all the templates in the root instead of in a `templates` subdirectory, so make the change here to no longer look for templates in `templates`.
This also fixes an issue around using `Depth: 1` that I found while testing this. When a named template is used, we attempt to clone or pull from the `pulumi/templates` repo to `~/.pulumi/templates`. Having it go in this well-known directory allows us to maintain previous behavior around allowing offline use of templates. If we use `Depth: 1` for the initial clone, it will fail when attempting to pull when there are updates to the remote repository. Unfortunately, there's no built-in `--unshallow` support in `go-git` and setting a larger `Depth` doesn't appear to help. There may be a workaround, but for now, if we're cloning the pulumi templates directory to `~/.pulumi/templates`, we won't use `Depth: 1`. For template URLs, we will continue to use `Depth: 1` as we clone those to a temp directory (which gets deleted) that we'll never try to update.
* List available templates in help text
* Address PR Feedback
* Don't show "Installing dependencies" message for `up`
* Fix secrets handling
When prompting for config, if the existing stack value is a secret, keep it a secret and mask the prompt. If the template says it should be secret, make it a secret.
* Fix ${PROJECT} and ${DESCRIPTION} handling for `up`
Templates used with `up` should already have a filled-in project name and description, but if it's a `new`-style template, that has `${PROJECT}` and/or `${DESCRIPTION}`, be helpful and just replace these with better values.
* Fix stack handling
Add a bool `setCurrent` param to `requireStack` to control whether the current stack should be saved in workspace settings. For the `up <url>` case, we don't want to save. Also, split the `up` code into two separate functions: one for the `up <url>` case and another for the normal `up` case where you have workspace in your current directory. While we may be able to combine them back into a single function, right now it's a bit cleaner being separate, even with some small amount of duplication.
* Fix panic due to nil crypter
Lazily get the crypter only if needed inside `promptForConfig`.
* Embellish comment
* Harden isPreconfiguredEmptyStack check
Fix the code to check to make sure the URL specified on the command line matches the URL stored in the `pulumi:template` config value, and that the rest of the config from the stack satisfies the config requirements of the template.
Some time ago, we introduced the concept of the initialization error to
Pulumi (i.e., an error where the resource was successfully created but
failed to fully initialize). This was originally implemented in `Create`
and `Update` methods of the resource provider interface; when we
detected an initialization failure, we'd pack the live version of the
object into the error, and return that to the engine.
Omitted from this initial implementation was a similar semantics for
`Read`. There are many implications of this, but one of them is that a
`pulumi refresh` will erase any initialization errors that had
previously been observed, even if the initialization errors still exist
in the resource.
This commit will introduce the initialization error semantics to `Read`,
fixing this issue.
The belief is that this hides some complexity that we shouldn't be
exposing in the default case.
In order to filter these events from both the diff/progress display
and the resource change summary, we perform this filtering in
`pkg/engine`.
Fixes#1733.
* Emit reads for external resources when refreshing
Fixespulumi/pulumi#1744. This commit educates the refresh source about
external resources. If a refresh source encounters a resource with the
External bit set, it'll send a Read event to the engine and the engine
will process it accordingly.
* CR: save last event channel instead of last event, style fixes
Our existing logic was ported from an existing NPM package. However,
our port was incorrect, which is unsurprising given the style of the
source code.
I have rewritten the logic to be more idomatic golang, while keeping
the overall detection logic intact.
Our detection is still based on the presence of environment
variables.
Fixes: #1646
* Serialize SourceEvents coming from the refresh source
The engine requires that a source event coming from a source be "ready
to execute" at the moment that it is sent to the engine. Since the
refresh source sent all goal states eagerly through its source iterator,
the engine assumed that it was legal to execute them all in parallel and
did so. This is a problem for the snapshot, since the snapshot expects
to be in an order that is a legal topological ordering of the dependency
DAG.
This PR fixes the issue by sending refresh source events one-at-a-time
through the refresh source iterator, only unblocking to send the next
step as soon as the previous step completes.
* Fix deadlock in refresh test
* Fix an issue where the engine "completed" steps too early
By signalling that a step is done before committing the step's results
to the snapshot, the engine was left with a race where dependent
resources could find themselves completely executed and committed before
a resource that they depend on has been committed.
Fixespulumi/pulumi#1726
* Fix an issue with Replace steps at the end of a plan
If the last step that was executed successfully was a Replace, we could
end up in a situation where we unintentionally left the snapshot
invalid.
* Add a test
* CR: pass context.Context as first parameter to Iterate
* CR: null->nil
This is consistent with the behavior prior to the introduction of Read
steps. In order to avoid a breaking change we must do this check in the
engine itself, which causes a bit of a layering violation: because IDs
are marshaled as raw strings rather than PropertyValues, the engine must
check against the marshaled form of an unknown directly (i.e.
`plugin.UnknownStringValue`).
When calculating deletes, we will only issue a single delete step for a
particular URN. This is incorrect in the presence of pending deletes
that share URNs with a live resource if the pending deletes follow the
live resource in the checkpoint: instead of issuing a delete for
every resource with a particular URN, we will only issue deletes for
the pending deletes.
Before first-class providers, this was mostly benigin: any remaining
resources could be deleted by re-running the destroy. With the
first-class provider changes, however, the provider for the undeleted
resources will be deleted, leaving the checkpoint in an invalid state.
These changes fix this issue by allowing the step generator to issue
multiple deletes for a single URN and add a test for this scenario.
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
* Execute chains of steps in parallel
Fixespulumi/pulumi#1624. Since register resource steps are known to be
ready to execute the moment the engine sees them, we can effectively
parallelize all incoming step chains. This commit adds the machinery
necessary to do so - namely a step executor and a plan executor.
* Remove dead code
* CR: use atomic.Value to be explicit about what values are atomically loaded and stored
* CR: Initialize atomics to 'false'
* Add locks around data structures in event callbacks
* CR: Add DegreeOfParallelism method on Options and add comment on select in Execute
* CR: Use context.Context for cancellation instead of cancel.Source
* CR: improve cancellation
* Rebase against master: execute read steps in parallel
* Please gometalinter
* CR: Inline a few methods in stepExecutor
* CR: Feedback and bug fixes
1. Simplify step_executor.go by 'bubbling' up errors as far as possible
and reporting diagnostics and cancellation in one place
2. Fix a bug where the CLI claimed that a plan was cancelled even if it
wasn't (it just has an error)
* Comments
* CR: Add comment around problematic select, move workers.Add outside of goroutine, return instead of break
We retain a few tests on the RunBuild plan, with `typescript` set to
false in the runtime options, but for the general case, we remove the
build steps and custom entry points for our programs.
This change lets us set runtime specific options in Pulumi.yaml, which
will flow as arguments to the language hosts. We then teach the nodejs
host that when the `typescript` is set to `true` that it should load
ts-node before calling into user code. This allows using typescript
natively without an explicit compile step outside of Pulumi.
This works even when a tsconfig.json file is not present in the
application and should provide a nicer inner loop for folks writing
typescript (I'm pretty sure everyone has run into the "but I fixed
that bug! Why isn't it getting picked up? Oh, I forgot to run tsc"
problem.
Fixes#958
The `range` operator returns array indexes that are 0-indexed. This is helpful when working with the computer code, but since we print the error to humans it looks really strange.
e.g.
```
error: 7 errors occurred:
0) resource 'urn:pulumi:timer-ex::timer::pulumi:pulumi:Stack::timer-timer-ex' is from a different stack (timer-ex != timer-import)
1) resource 'urn:pulumi:timer-ex::timer:☁️timer:Timer::test-timer' is from a different stack (timer-ex != timer-import)
...
```
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
Fixes#1643.
When a resource fails to initialize (i.e., it is successfully created,
but fails to transition to a fully-initialized state), and a user
subsequently runs `pulumi update` without changing that resource, our
CLI will fail to warn the user that this resource is not initialized.
This commit resolves this issue.
When a resource fails to initialize (i.e., it is successfully created,
but fails to transition to a fully-initialized state), and a user
subsequently runs `pulumi update` without changing that resource, our
CLI will fail to warn the user that this resource is not initialized.
This commit begins the process of allowing our CLI to report this by
storing a list of initialization errors in the checkpoint.
* Work around a potentially bad assert in the engine
The engine asserts if presented with a plan that deletes the same URN
more than once. This has been empirically proven to be possible, so I am
removing the assert.
* CR: Add log for multiple pending-delete deletes
* [Parallelism] Introduce a "step generator" component by refactoring all
step generation logic out of PlanIterator
* CR: remove dead fields on PlanIterator
Per #1481, we unintentionally disallowed empty text assets, simply
because of the way we did discriminated union testing. It's easy
enough to just treat the empty asset like an empty string asset.
This commit adds CLI support for resource providers to provide partial
state upon failure. For resource providers that model resource
operations across multiple API calls, the Provider RPC interface can now
accomodate saving bags of state for resource operations that failed.
This is a common pattern for Terraform-backed providers that try to do
post-creation steps on resource as part of Create or Update resource
operations.
If we've hit the maximum number of retry attempts, return `true` for
`done`. As it stands, it is possible for us to return a `nil` error
(e.g. if the request sends successfully but returns a `50x` status) and
`false` for `done`, which `retry.Until` will interpret as "keep
retrying".
As an alternative we could consider simply returning an empty `Blob`.
I think it's better to fail loudly, though, as this situation can result
from unexpected/invalid archives (which we need to do a better job of
validating).
Fixes#1493.
This allows us to delete the one off export/import test, which is nice
because it failed to run when PULUMI_ACCESS_TOKEN was not set in the
environment (due to an interaction between `pulumi login` and the
bare-bones integration test framework)
Because we run our golang integration tests "in tree" (due to
the need to be under $GOPATH and have a vendor folder around), the
"command-output" folder was getting left behind, dirtying the worktree
after building.
This change does two things:
1. On a succecssful run, remove the folder.
2. Ignore the folder via .gitignore (this way if a test fails and you
do `git add .` you don't end up commiting this folder).
This change makes it a little easier to do the style of highlighting
we are doing now with the login prompt, cleaning up some of the
padding calculations that were otherwise complicated due to ANSI
escape sequences.
This change makes our login prompt a little "friendlier", especially
important since this will be the first thing a new user sees.
The new message is:
$ pulumi new
We need your Pulumi account to identify you.
Enter your access token from https://app.pulumi.com/account
or hit <ENTER> to log in using your browser :
The ZIP format started with MS-DOS dates, which start in 1980. Other dates
have been layered on, but the ZIP file handler used by Azure websites still
relies on the MS-DOS dates.
Using the Unix epoch here (1970) results in ZIP entries that (e.g.)
OSX `unzip` sees as 12-31-1969 (timezones) but Azure websites sees as
01/01/2098.
Due to the way GOPATH and vendoring works, copying Go tests out to a
random temp directory simply will not work. This is largely a holdover
to the days of when .pulumi/ directories would pollute the directory,
but is also done for languages like Node.js whose preparatory and build
steps also pollute the working directory (with bin/ and node_modules/
directories). Go does not have this problem, so we can safely skip.
Previously, we would include information about what git commit a build
came from in the "local" portion of the PEP-440 version. This was a
problem because PyPI does not allow packages to be upload to the
registry if they contain local parts.
So, for now, we'll just never put in the git commit information in the
generate version. We'll continue to add a dirty tag in the local
part. This will be prevent us from publishing dirty builds to PyPI,
but that's in line with what we want.
Today we defaulted our tests to create stacks in the `pulumi`
organization. We did this because our tests run with `pulumi-bot` and
we'd rather create the stacks in our shared organization, so any
Pulumi developer can see them.
Of course, as we prepare to have folks outside of the Pulumi
organization write and run tests, this has now become a bad default.
Remove the ability to explicitly set an owner in
ProgramTestOptions (since that would more or less only lead to pain
going forward) and default to just creating the stacks in whatever
account is currently logged in. In CI, we'll set a new environment
variable "PULUMI_TEST_OWNER" which controls the owner of the stacks,
which we'll set to `pulumi`.
Impact to day to day developers is during test runs locally you'll see
stacks in your list of stacks. If any of the tests fail to clean up,
you'll see these lingering stacks (but you can go clean them up).
This change adds some convenience functions and types, to make strongly
typed outputs more pleasant to interact with. It also includes tests
for output generally, in addition to these new functions and types.
This adds rudimentary support for Pulumi programs written in Go. It
is not complete yet but the basic resource registration works.
Note that, stylistically speaking, Go is a bit different from our other
languages. This made it a bit easier to build this initial prototype,
since what we want is actually a rather thin veneer atop our existing
RPC interfaces. The lack of generics, however, adds some friction and
is something I'm continuing to hammer on; this will most likely lead to
little specialized types (e.g. StringOutput) once the dust settles.
There are two primary components:
1) A new language host, `pulumi-language-go`, which is responsible for
communicating with the engine through the usual gRPC interfaces.
Because Go programs are pre-compiled, it very simply loads a binary
with the same name as the project.
2) A client SDK library that Pulumi programs bind against. This exports
the core resource types -- including assets -- properties -- including
output properties -- and configuration.
Most remaining TODOs are marked as such in the code, and this will not
be merged until they have been addressed, and some better tests written.
math/rand uses a fixed seed, meaning that across runs the Kth call to
`rand.Int63()` will always return the same value.
Given that we want to provide a unique suffix across multiple
concurrent runs, this isn't the behavior we want.
I saw an instance fail in CI where all three legs ran the test
concurrently and they raced on creating the test stack, since they all
generated the same name.
Now that the "config" member of Pulumi.yaml has been deprecated for a
while, we'll change it's meaning. When set, the value is treated as a
path and joined with the path to Pulumi.yaml, and per stack
configuration is stored in that folder
Fixes#1031
This lets us set these values globaly, in our Travis and AppVeyor
configurations instead of forcing every test to opt-in. It also means
that by default, local builds will not report any of this data (and
will not need access to these endpoints).
The Version field was inadvertently dropped when sending an import
request to the service. Now that we are requiring that the Version field
be set in deployments, this was causing errors.
Calling `bytes.NewBuffer` gives up ownership of the backing memory and creates
a _mutable_ buffer. We don't need that, so let's use `bytes.NewReader` instead.
Not sending request body on retry is bad enough, but we keep the original
`Content-Length` and the server ends up expecting a body we never send.
This results in `400 Bad Request` errors from the ALB.
* Error when loading a deployment that is not a version that the CLI understands
* Add a test for 'pulumi stack import' on a badly-versioned deployment
* Move current deployment version to 'apitype'
* Rebase against master
* CR: emit CLI-friendly error message at the two points outside of the engine calling 'DeserializeDeployment'