Previously, we would include information about what git commit a build
came from in the "local" portion of the PEP-440 version. This was a
problem because PyPI does not allow packages to be upload to the
registry if they contain local parts.
So, for now, we'll just never put in the git commit information in the
generate version. We'll continue to add a dirty tag in the local
part. This will be prevent us from publishing dirty builds to PyPI,
but that's in line with what we want.
Today we defaulted our tests to create stacks in the `pulumi`
organization. We did this because our tests run with `pulumi-bot` and
we'd rather create the stacks in our shared organization, so any
Pulumi developer can see them.
Of course, as we prepare to have folks outside of the Pulumi
organization write and run tests, this has now become a bad default.
Remove the ability to explicitly set an owner in
ProgramTestOptions (since that would more or less only lead to pain
going forward) and default to just creating the stacks in whatever
account is currently logged in. In CI, we'll set a new environment
variable "PULUMI_TEST_OWNER" which controls the owner of the stacks,
which we'll set to `pulumi`.
Impact to day to day developers is during test runs locally you'll see
stacks in your list of stacks. If any of the tests fail to clean up,
you'll see these lingering stacks (but you can go clean them up).
This change adds some convenience functions and types, to make strongly
typed outputs more pleasant to interact with. It also includes tests
for output generally, in addition to these new functions and types.
This adds rudimentary support for Pulumi programs written in Go. It
is not complete yet but the basic resource registration works.
Note that, stylistically speaking, Go is a bit different from our other
languages. This made it a bit easier to build this initial prototype,
since what we want is actually a rather thin veneer atop our existing
RPC interfaces. The lack of generics, however, adds some friction and
is something I'm continuing to hammer on; this will most likely lead to
little specialized types (e.g. StringOutput) once the dust settles.
There are two primary components:
1) A new language host, `pulumi-language-go`, which is responsible for
communicating with the engine through the usual gRPC interfaces.
Because Go programs are pre-compiled, it very simply loads a binary
with the same name as the project.
2) A client SDK library that Pulumi programs bind against. This exports
the core resource types -- including assets -- properties -- including
output properties -- and configuration.
Most remaining TODOs are marked as such in the code, and this will not
be merged until they have been addressed, and some better tests written.
math/rand uses a fixed seed, meaning that across runs the Kth call to
`rand.Int63()` will always return the same value.
Given that we want to provide a unique suffix across multiple
concurrent runs, this isn't the behavior we want.
I saw an instance fail in CI where all three legs ran the test
concurrently and they raced on creating the test stack, since they all
generated the same name.
Now that the "config" member of Pulumi.yaml has been deprecated for a
while, we'll change it's meaning. When set, the value is treated as a
path and joined with the path to Pulumi.yaml, and per stack
configuration is stored in that folder
Fixes#1031
This lets us set these values globaly, in our Travis and AppVeyor
configurations instead of forcing every test to opt-in. It also means
that by default, local builds will not report any of this data (and
will not need access to these endpoints).
The Version field was inadvertently dropped when sending an import
request to the service. Now that we are requiring that the Version field
be set in deployments, this was causing errors.
Calling `bytes.NewBuffer` gives up ownership of the backing memory and creates
a _mutable_ buffer. We don't need that, so let's use `bytes.NewReader` instead.
Not sending request body on retry is bad enough, but we keep the original
`Content-Length` and the server ends up expecting a body we never send.
This results in `400 Bad Request` errors from the ALB.
* Error when loading a deployment that is not a version that the CLI understands
* Add a test for 'pulumi stack import' on a badly-versioned deployment
* Move current deployment version to 'apitype'
* Rebase against master
* CR: emit CLI-friendly error message at the two points outside of the engine calling 'DeserializeDeployment'
An empty preview is not a guarantee that a subsequent update will cause
no changes. As such, we should always offer the user the option to
perform an update even if the preview proposes no changes.
Note that this indirectly fixes#1410 by masking the effects of #1429.
This change supports displaying manifest information for a stack and
changes the way we handle Snapshots in our backend.
Previously, every call to GetStack would synthesize a Snapshot by
taking the set of resources returned from the
`/api/stacks/<owner>/<name>` endpoint, combined with an empty
manfiest (since the service was not returning the manifest).
This wasn't great for two reasons:
1. We didn't have manifest information, so we couldn't display any of
its information (most important the last updated time).
2. This strategy required that the service return all the resources
for a stack anytime GetStack was called. While the CLI did not
often need this detailed information the fact that we forced the
Service to produce it (which in the case of stack managed PPC would
require the service to talk to yet another service) creates a bunch
of work that we end up ignoring.
I've refactored the code such that `backend.Stack`'s `Snapshot()` method
now lazily requests the information from the service such that we can
construct a `Snapshot()` on demand and only pay the cost when we
actually need it.
I think making more of this stuff lazy is the long term direction we
want to follow.
Unfortunately, right now, it means in cases where we do need this data
we end up fetching it twice. The service does it once when we call
GetStack and then we do it again when we actually need to get at the
Snapshot. However, once we land this change, we can update the
service to no longer return resources on the apistack.Stack type. The
CLI no longer needs this property. We'll likely want to continue in a
direction where `apistack.Stack` can be created quickly by the
service (without expensive database queries or fetching remote
resources) and just add additional endpoints that let us get at the
specific information we want in the specific cases when we want it
instead of forcing us to return a bunch of data that we often ignore.
Fixespulumi/pulumi-service#371
* Delete Before Create
This commit implements the full semantics of delete before create. If a
resource is replaced and requires deletion before creation, the engine
will use the dependency graph saved in the snapshot to delete all
resources that depend on the resource being replaced prior to the
deletion of the resource to be replaced.
* Rebase against master
* CR: Simplify the control flow in makeRegisterResourceSteps
* Run Check on new inputs when re-creating a resource
* Fix an issue where the planner emitted benign but incorrect deletes of DBR-deleted resources
* CR: produce the list of dependent resources in dependency order and iterate over the list in reverse
* CR: deps->dependents, fix an issue with DependingOn where duplicate nodes could be added to the dependent set
* CR: Fix an issue where we were considering old defaults and new inputs
inappropriately when re-creating a deleted resource
* CR: save 'iter.deletes[urn]' as a local, iterate starting at cursorIndex + 1 for dependency graph
At some point the summary and preview parameters to
`engine.GetResourcePropertiesDetails` were flipped s.t. we stopped
rendering computed<> and output<> values properly during previews.
We currently display at most two rows for messages that are not
associated with a URN: one for those that arrive before the stack
resource is first observed and one for those that arrive after the stack
resource is first observed. The former is labeled "global"; the latter
is the row associated with the stack resource. These changes remove the
duplication by reassociating the row used for events with no URN that
arrive before the stack resource with the stack resource once it has
been observed.
Fixes#1385.
Our current strategy for the progress display on non-TTYs causes us to
display multiple identical rows for each resource when the row is a
preview or a no-op. This behavior is not particularly useful, and
generally just makes the display noisier than it needs to be.
These changes avoid displaying resource rows without meaningful output
by supressing the display of resource output events that are delivered
during a preview or that correspond to a no-op update.
Fixes#1384.
This changes two things:
1) Eliminates the fact that we had two kinds of previews in our engine.
2) Always initialize the plugin.Events, to ensure that all plugin loads
are persisted no matter the update type (update, refresh, destroy),
and skip initializing it when dryRun == true, since we won't save them.
The PluginEvents will now try to register loaded plugins which,
during a refresh preview, will result in attempting to save mutations
when a token is missing. This change mirrors the changes made to
destroy which avoid it panicing similarly, by simply leaving
PluginEvents unset. Also adds a bit of tracing that was helpful to
me as I debugged through the underlying issues.
Fixes#1377.
Before we were reading a boolean variable that was set by another goroutine.
Without any sync primitives, I think Go is within its rights to optimize
that away.
We now require that `ctx` is non-`nil`. This was already true for all callers
and consistent with other Go functions that take contexts.
* Graceful RPC shutdown: CLI side
* Handle unavailable resource monitor in language hosts
* Fix a comment
* Don't commit package-lock.json
* fix mangled pylint pragma
* Rebase against master and fix Gopkg.lock
* Code review feedback
* Fix a race between closing the callerEventsOpt channel and terminating a goroutine that writes to it
* glog -> logging
