These changes add support for provider-side previews of create and
update operations, which allows resource providers to supply output
property values for resources that are being created or updated during a
preview.
If a plugin supports provider-side preview, its create/update methods
will be invoked during previews with the `preview` property set to true.
It is the responsibility of the provider to fill in any output
properties that are known before returning. It is a best practice for
providers to only fill in property values that are guaranteed to be
identical if the preview were instead an update (i.e. only those output
properties whose values can be conclusively determined without
actually performing the create/update operation should be populated).
Providers that support previews must accept unknown values in their
create and update methods.
If a plugin does not support provider-side preview, the inputs to a
create or update operation will be propagated to the outputs as they are
today.
Fixes#4992.
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
* Make `async:true` the default for `invoke` calls (#3750)
* Switch away from native grpc impl. (#3728)
* Remove usage of the 'deasync' library from @pulumi/pulumi. (#3752)
* Only retry as long as we get unavailable back. Anything else continues. (#3769)
* Handle all errors for now. (#3781)
* Do not assume --yes was present when using pulumi in non-interactive mode (#3793)
* Upgrade all paths for sdk and pkg to v2
* Backport C# invoke classes and other recent gen changes (#4288)
Adjust C# generation
* Replace IDeployment with a sealed class (#4318)
Replace IDeployment with a sealed class
* .NET: default to args subtype rather than Args.Empty (#4320)
* Adding system namespace for Dotnet code gen
This is required for using Obsolute attributes for deprecations
```
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'ObsoleteAttribute' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'Obsolete' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
```
* Fix the nullability of config type properties in C# codegen (#4379)
Pulumi HCL2 IR:
- Add support for invokes
- Add support for resource options, incl. ranged resources
- Allow the apply rewriter to ignore promise-typed values
- Add tests for the binder
- Add support functions for TF: entries and range
NodeJS codegen:
- Simplify for expression codegen
- Add support for invoke codegen
- Add support for entries and range functions
- Add tests
Python codegen:
- Implement codegen for most expression types
- Add support for invoke codegen
- Add tests
These changes add a new method to the resource provider gRPC interface,
`GetSchema`, that allows consumers of these providers to extract
JSON-serialized schema information for the provider's types, resources,
and functions.
These changes add support for passing `ignoreChanges` paths to resource
providers. This is intended to accommodate providers that perform diffs
between resource inputs and resource state (e.g. all Terraform-based
providers, the k8s provider when using API server dry-runs). These paths
are specified using the same syntax as the paths used in detailed diffs.
In addition to passing these paths to providers, the existing support
for `ignoreChanges` in inputs has been extended to accept paths rather
than top-level keys. It is an error to specify a path that is missing
one or more component in the old or new inputs.
Fixes#2936, #2663.
* Plumbing the custom timeouts from the engine to the providers
* Plumbing the CustomTimeouts through to the engine and adding test to show this
* Change the provider proto to include individual timeouts
* Plumbing the CustomTimeouts from the engine through to the Provider RPC interface
* Change how the CustomTimeouts are sent across RPC
These errors were spotted in testing. We can now see that the timeout
information is arriving in the RegisterResourceRequest
```
req=&pulumirpc.RegisterResourceRequest{
Type: "aws:s3/bucket:Bucket",
Name: "my-bucket",
Parent: "urn:pulumi:dev::aws-vpc::pulumi:pulumi:Stack::aws-vpc-dev",
Custom: true,
Object: &structpb.Struct{},
Protect: false,
Dependencies: nil,
Provider: "",
PropertyDependencies: {},
DeleteBeforeReplace: false,
Version: "",
IgnoreChanges: nil,
AcceptSecrets: true,
AdditionalSecretOutputs: nil,
Aliases: nil,
CustomTimeouts: &pulumirpc.RegisterResourceRequest_CustomTimeouts{
Create: 300,
Update: 400,
Delete: 500,
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
},
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
}
```
* Changing the design to use strings
* CHANGELOG entry to include the CustomTimeouts work
* Changing custom timeouts to be passed around the engine as converted value
We don't want to pass around strings - the user can provide it but we want
to make the engine aware of the timeout in seconds as a float64
For provider plugins, the gRPC interfaces expect that a URN would be
included as part of the DiffConfig/CheckConfig request, which means we
need to flow this value into our Provider interface.
This change does that.
These changes take advantage of the newly-added support for returning
inputs from Read to update a resource's inputs as part of a refresh.
As a consequence, the Pulumi engine will now properly detect drift
between the actual state of a resource and the desired state described
by the program and generate appropriate update or replace steps.
As part of these changes, a resource's old inputs are now passed to the
provider when performing a refresh. The provider can take advantage of
this to maintain the accuracy of any additional data or metadata in the
resource's inputs that may need to be updated during the refresh.
This is required for the complete implementation of
https://github.com/pulumi/pulumi-terraform/pull/349. Without access to
the old inputs for a resource, TF-based providers would lose all
information about default population during a refresh.
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
We signal provider cancellation by hangning a goroutine off of the plan
executor's parent context. To ensure clean shutdown, this goroutine also
listens on a channel that closes once the plan has finished executing.
Unfortunately, we were closing this channel too early, and the close was
racing with the cancellation signal. These changes ensure that the
channel closes after the plan has fully completed.
Fixes#1906.
Fixespulumi/pulumi-kubernetes#185.
Some time ago, we introduced the concept of the initialization error to
Pulumi (i.e., an error where the resource was successfully created but
failed to fully initialize). This was originally implemented in `Create`
and `Update` methods of the resource provider interface; when we
detected an initialization failure, we'd pack the live version of the
object into the error, and return that to the engine.
Omitted from this initial implementation was a similar semantics for
`Read`. There are many implications of this, but one of them is that a
`pulumi refresh` will erase any initialization errors that had
previously been observed, even if the initialization errors still exist
in the resource.
This commit will introduce the initialization error semantics to `Read`,
fixing this issue.
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.