Rename deploy.Plan to deploy.Deployment.
There are two benefits to this change:
1. The name "Deployment" more accurately reflects the behavior of the
type, which is responsible for previewing or executing a deployment.
2. Renaming this type frees up the name "Plan" for use when addressing
#2318.
These changes add support for provider-side previews of create and
update operations, which allows resource providers to supply output
property values for resources that are being created or updated during a
preview.
If a plugin supports provider-side preview, its create/update methods
will be invoked during previews with the `preview` property set to true.
It is the responsibility of the provider to fill in any output
properties that are known before returning. It is a best practice for
providers to only fill in property values that are guaranteed to be
identical if the preview were instead an update (i.e. only those output
properties whose values can be conclusively determined without
actually performing the create/update operation should be populated).
Providers that support previews must accept unknown values in their
create and update methods.
If a plugin does not support provider-side preview, the inputs to a
create or update operation will be propagated to the outputs as they are
today.
Fixes#4992.
- Remove `Info` from `Source`. This method was not used.
- Remove `Stack` from `EvalSource`. This method was not used.
- Remove `Type` and `URN` from `Step`. These values are available via
`Res().URN.Type()` and `Res().URN`, respectively. This removes the
possibility of inconsistencies between the type, URN, and state of the
resource associated with a `Step`.
- Remove URN from StepEventMetadata.
After importing some resources, and running a second update with the
import still applied, an unexpected replace would occur. This wouldn't
happen for the vast majority of resources, but for some it would.
It turns out that the resources that trigger this are ones that use a
different format of identifier for the import input than they do for the
ID property.
Before this change, we would trigger an import-replacement when an
existing resource's ID property didn't match the import property, which
would be the case for the small set of resources where the input
identifier is different than the ID property.
To avoid this, we now store the `importID` in the statefile, and
compare that to the import property instead of comparing the ID.
* Make `async:true` the default for `invoke` calls (#3750)
* Switch away from native grpc impl. (#3728)
* Remove usage of the 'deasync' library from @pulumi/pulumi. (#3752)
* Only retry as long as we get unavailable back. Anything else continues. (#3769)
* Handle all errors for now. (#3781)
* Do not assume --yes was present when using pulumi in non-interactive mode (#3793)
* Upgrade all paths for sdk and pkg to v2
* Backport C# invoke classes and other recent gen changes (#4288)
Adjust C# generation
* Replace IDeployment with a sealed class (#4318)
Replace IDeployment with a sealed class
* .NET: default to args subtype rather than Args.Empty (#4320)
* Adding system namespace for Dotnet code gen
This is required for using Obsolute attributes for deprecations
```
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'ObsoleteAttribute' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'Obsolete' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
```
* Fix the nullability of config type properties in C# codegen (#4379)
- If an untargeted create would not affect the inputs of any targeted
resources, do not fail the update. Untargeted creates that are
directly dependend on by targeted resources will still cause failures
that inform the user to add the untargeted resources to the --target
list.
- Users may now pass the `--target-dependents` flag to allow targeted
destroys to automatically target dependents that must be destroyed in
order to destroy an explicitly targeted resource.
These changes restore a more-correct version of the behavior that was
disabled with #3014. The original implementation of this behavior was
done in the SDKs, which do not have access to the complete inputs for a
resource (in particular, default values filled in by the provider during
`Check` are not exposed to the SDK). This lack of information meant that
the resolved output values could disagree with the typings present in
a provider SDK. Exacerbating this problem was the fact that unknown
values were dropped entirely, causing `undefined` values to appear in
unexpected places.
By doing this in the engine and allowing unknown values to be
represented in a first-class manner in the SDK, we can attack both of
these issues.
Although this behavior is not _strictly_ consistent with respect to the
resource model--in an update, a resource's output properties will come
from its provider and may differ from its input properties--this
behavior was present in the product for a fairly long time without
significant issues. In the future, we may be able to improve the
accuracy of resource outputs during a preview by allowing the provider
to dry-run CRUD operations and return partially-known values where
possible.
These changes also introduce new APIs in the Node and Python SDKs
that work with unknown values in a first-class fashion:
- A new parameter to the `apply` function that indicates that the
callback should be run even if the result of the apply contains
unknown values
- `containsUnknowns` and `isUnknown`, which return true if a value
either contains nested unknown values or is exactly an unknown value
- The `Unknown` type, which represents unknown values
The primary use case for these APIs is to allow nested, properties with
known values to be accessed via the lifted property accessor even when
the containing property is not fully know. A common example of this
pattern is the `metadata.name` property of a Kubernetes `Namespace`
object: while other properties of the `metadata` bag may be unknown,
`name` is often known. These APIs allow `ns.metadata.name` to return a
known value in this case.
In order to avoid exposing downlevel SDKs to unknown values--a change
which could break user code by exposing it to unexpected values--a
language SDK must indicate whether or not it supports first-class
unknown values as part of each `RegisterResourceRequest`.
These changes also allow us to avoid breaking user code with the new
behavior introduced by the prior commit.
Fixes#3190.
These changes restore a more-correct version of the behavior that was
disabled with #3014. The original implementation of this behavior was
done in the SDKs, which do not have access to the complete inputs for a
resource (in particular, default values filled in by the provider during
`Check` are not exposed to the SDK). This lack of information meant that
the resolved output values could disagree with the typings present in
a provider SDK. Exacerbating this problem was the fact that unknown
values were dropped entirely, causing `undefined` values to appear in
unexpected places.
By doing this in the engine and allowing unknown values to be
represented in a first-class manner in the SDK, we can attack both of
these issues.
Although this behavior is not _strictly_ consistent with respect to the
resource model--in an update, a resource's output properties will come
from its provider and may differ from its input properties--this
behavior was present in the product for a fairly long time without
significant issues. In the future, we may be able to improve the
accuracy of resource outputs during a preview by allowing the provider
to dry-run CRUD operations and return partially-known values where
possible.
These changes also introduce new APIs in the Node and Python SDKs
that work with unknown values in a first-class fashion:
- A new parameter to the `apply` function that indicates that the
callback should be run even if the result of the apply contains
unknown values
- `containsUnknowns` and `isUnknown`, which return true if a value
either contains nested unknown values or is exactly an unknown value
- The `Unknown` type, which represents unknown values
The primary use case for these APIs is to allow nested, properties with
known values to be accessed via the lifted property accessor even when
the containing property is not fully know. A common example of this
pattern is the `metadata.name` property of a Kubernetes `Namespace`
object: while other properties of the `metadata` bag may be unknown,
`name` is often known. These APIs allow `ns.metadata.name` to return a
known value in this case.
In order to avoid exposing downlevel SDKs to unknown values--a change
which could break user code by exposing it to unexpected values--a
language SDK must indicate whether or not it supports first-class
unknown values as part of each `RegisterResourceRequest`.
These changes also allow us to avoid breaking user code with the new
behavior introduced by the prior commit.
Fixes#3190.
* Allow resource IDs to change on reresh steps
This is a requirement for us to be able to move forward with
versions of the Terraform Azurerm provider. In v1.32.1, there was
a state migration that changed the ID format of the azure table
storage resource
We used to have a check in place for old ID being equal to new ID.
This has been changed now and we allow the change of ID to happen
in the RefreshStep
* Update pkg/resource/deploy/step.go
Co-Authored-By: Pat Gavlin <pat@pulumi.com>
These changes add support for passing `ignoreChanges` paths to resource
providers. This is intended to accommodate providers that perform diffs
between resource inputs and resource state (e.g. all Terraform-based
providers, the k8s provider when using API server dry-runs). These paths
are specified using the same syntax as the paths used in detailed diffs.
In addition to passing these paths to providers, the existing support
for `ignoreChanges` in inputs has been extended to accept paths rather
than top-level keys. It is an error to specify a path that is missing
one or more component in the old or new inputs.
Fixes#2936, #2663.
* Plumbing the custom timeouts from the engine to the providers
* Plumbing the CustomTimeouts through to the engine and adding test to show this
* Change the provider proto to include individual timeouts
* Plumbing the CustomTimeouts from the engine through to the Provider RPC interface
* Change how the CustomTimeouts are sent across RPC
These errors were spotted in testing. We can now see that the timeout
information is arriving in the RegisterResourceRequest
```
req=&pulumirpc.RegisterResourceRequest{
Type: "aws:s3/bucket:Bucket",
Name: "my-bucket",
Parent: "urn:pulumi:dev::aws-vpc::pulumi:pulumi:Stack::aws-vpc-dev",
Custom: true,
Object: &structpb.Struct{},
Protect: false,
Dependencies: nil,
Provider: "",
PropertyDependencies: {},
DeleteBeforeReplace: false,
Version: "",
IgnoreChanges: nil,
AcceptSecrets: true,
AdditionalSecretOutputs: nil,
Aliases: nil,
CustomTimeouts: &pulumirpc.RegisterResourceRequest_CustomTimeouts{
Create: 300,
Update: 400,
Delete: 500,
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
},
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
}
```
* Changing the design to use strings
* CHANGELOG entry to include the CustomTimeouts work
* Changing custom timeouts to be passed around the engine as converted value
We don't want to pass around strings - the user can provide it but we want
to make the engine aware of the timeout in seconds as a float64
A resource can be imported by setting the `import` property in the
resource options bag when instantiating a resource. In order to
successfully import a resource, its desired configuration (i.e. its
inputs) must not differ from its actual configuration (i.e. its state)
as calculated by the resource's provider.
There are a few interesting state transitions hiding here when importing
a resource:
1. No prior resource exists in the checkpoint file. In this case, the
resource is simply imported.
2. An external resource exists in the checkpoint file. In this case, the
resource is imported and the old external state is discarded.
3. A non-external resource exists in the checkpoint file and its ID is
different from the ID to import. In this case, the new resource is
imported and the old resource is deleted.
4. A non-external resource exists in the checkpoint file, but the ID is
the same as the ID to import. In this case, the import ID is ignored
and the resource is treated as it would be in all cases except for
changes that would replace the resource. In that case, the step
generator issues an error that indicates that the import ID should be
removed: were we to move forward with the replace, the new state of
the stack would fall under case (3), which is almost certainly not
what the user intends.
Fixes#1662.
Thse changes make a subtle but critical adjustment to the process the
Pulumi engine uses to determine whether or not a difference exists
between a resource's actual and desired states, and adjusts the way this
difference is calculated and displayed accordingly.
Today, the Pulumi engine get the first chance to decide whether or not
there is a difference between a resource's actual and desired states. It
does this by comparing the current set of inputs for a resource (i.e.
the inputs from the running Pulumi program) with the last set of inputs
used to update the resource. If there is no difference between the old
and new inputs, the engine decides that no change is necessary without
consulting the resource's provider. Only if there are changes does the
engine consult the resource's provider for more information about the
difference. This can be problematic for a number of reasons:
- Not all providers do input-input comparison; some do input-state
comparison
- Not all providers are able to update the last deployed set of inputs
when performing a refresh
- Some providers--either intentionally or due to bugs--may see changes
in resources whose inputs have not changed
All of these situations are confusing at the very least, and the first
is problematic with respect to correctness. Furthermore, the display
code only renders diffs it observes rather than rendering the diffs
observed by the provider, which can obscure the actual changes detected
at runtime.
These changes address both of these issues:
- Rather than comparing the current inputs against the last inputs
before calling a resource provider's Diff function, the engine calls
the Diff function in all cases.
- Providers may now return a list of properties that differ between the
requested and actual state and the way in which they differ. This
information will then be used by the CLI to render the diff
appropriately. A provider may also indicate that a particular diff is
between old and new inputs rather than old state and new inputs.
Fixes#2453.
Adds a new resource option `aliases` which can be used to rename a resource. When making a breaking change to the name or type of a resource or component, the old name can be added to the list of `aliases` for a resource to ensure that existing resources will be migrated to the new name instead of being deleted and replaced with the new named resource.
There are two key places this change is implemented.
The first is the step generator in the engine. When computing whether there is an old version of a registered resource, we now take into account the aliases specified on the registered resource. That is, we first look up the resource by its new URN in the old state, and then by any aliases provided (in order). This can allow the resource to be matched as a (potential) update to an existing resource with a different URN.
The second is the core `Resource` constructor in the JavaScript (and soon Python) SDKs. This change ensures that when a parent resource is aliased, that all children implicitly inherit corresponding aliases. It is similar to how many other resource options are "inherited" implicitly from the parent.
Four specific scenarios are explicitly tested as part of this PR:
1. Renaming a resource
2. Adopting a resource into a component (as the owner of both component and consumption codebases)
3. Renaming a component instance (as the owner of the consumption codebase without changes to the component)
4. Changing the type of a component (as the owner of the component codebase without changes to the consumption codebase)
4. Combining (1) and (3) to make both changes to a resource at the same time
Fixes#2650.
We have historically relied on merging inputs and outputs in several places in the engine. This used to be necessary, as discussed in #2650 (comment), but our core engine model has moved away from depending on this. However, we still have a couple places we do this merge, and those places have triggered several severe issues recently in subtle cases.
We believe that this merging should no longer be needed for a correct interpretation of the current engine model, and indeed that doing the merge actively violates the contract with providers. In this PR we remove the remaining places where this input + output merge was being done. In all three cases, we use just the Outputs, which for most providers will already include the same values as the inputs - but correctly as determined by the provider itself.
Fixes#2633.
Currently when a user runs `refresh` and a resource is in a state of
error, the `refresh` will fail and the resource state will not be
persisted. This can make it vastly harder to incrementally fix
infrastructure. The issue mentioned above explains more of the
historical context, as well as some specific failure modes.
This commit resolves this issue by causing refresh to *not* report an
error in this case, and instead to simply log a warning that the
`refresh` has recognized that the resource is in an unhealthy state
during state sync.
These changes take advantage of the newly-added support for returning
inputs from Read to update a resource's inputs as part of a refresh.
As a consequence, the Pulumi engine will now properly detect drift
between the actual state of a resource and the desired state described
by the program and generate appropriate update or replace steps.
As part of these changes, a resource's old inputs are now passed to the
provider when performing a refresh. The provider can take advantage of
this to maintain the accuracy of any additional data or metadata in the
resource's inputs that may need to be updated during the refresh.
This is required for the complete implementation of
https://github.com/pulumi/pulumi-terraform/pull/349. Without access to
the old inputs for a resource, TF-based providers would lose all
information about default population during a refresh.
If a provider returns information about the top-level properties that
differ, use those keys to filter the diffs that are rendered to the
user.
Fixes#2453.
In general, a "delete" in Pulumi is destroying an actual physical
resource. In the case of a read resource, however, the delete is
merely removing the resource from the stack; the physical resource
is not affected. These changes attempt to clarify this situation by
using the term "discard" rather than "delete".
Fixes#2015.
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
Recently, we eliminated bright black text, which IMHO makes the
"same" lines really stand out more than we want them to. This is
partly just due to the heavyweight nature of the "*" character,
which we precede every line with. This has the effect of making it
toughter to scan the update to see what's going to happen. The goal
of SpecUnimportant (bright black) was that we wanted to draw less
attention to certain elements of the CLI text -- and have them fade
into the background (apparently it was too successful at this ;-))
So, this change eliminates the "*" prefix for same operations
altogether. It reads better to my eyes and keeps the original intent.
* Retire pending deletions at start of plan
Instead of letting pending deletions pile up to be retired at the end of
a plan, this commit eagerly disposes of any pending deletions that were
pending at the end of the previous plan. This is a nice usability win
and also reclaims an invariant that at most one resource with a given
URN is live and at most one is pending deletion at any point in time.
* Rebase against master
* Fix a test issue arising from shared snapshots
* CR feedback
* plan -> replacement
* Use ephemeral statuses to communicate deletions
- Create all refresh steps before issuing any. This is important as the
state update loop expects all steps to exist.
- Check for cancellation later in the refresher.
This also fixes races in the SnapshotManager and the test journal that
could cause panics during cancellation.
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
Some time ago, we introduced the concept of the initialization error to
Pulumi (i.e., an error where the resource was successfully created but
failed to fully initialize). This was originally implemented in `Create`
and `Update` methods of the resource provider interface; when we
detected an initialization failure, we'd pack the live version of the
object into the error, and return that to the engine.
Omitted from this initial implementation was a similar semantics for
`Read`. There are many implications of this, but one of them is that a
`pulumi refresh` will erase any initialization errors that had
previously been observed, even if the initialization errors still exist
in the resource.
This commit will introduce the initialization error semantics to `Read`,
fixing this issue.
* Serialize SourceEvents coming from the refresh source
The engine requires that a source event coming from a source be "ready
to execute" at the moment that it is sent to the engine. Since the
refresh source sent all goal states eagerly through its source iterator,
the engine assumed that it was legal to execute them all in parallel and
did so. This is a problem for the snapshot, since the snapshot expects
to be in an order that is a legal topological ordering of the dependency
DAG.
This PR fixes the issue by sending refresh source events one-at-a-time
through the refresh source iterator, only unblocking to send the next
step as soon as the previous step completes.
* Fix deadlock in refresh test
* Fix an issue where the engine "completed" steps too early
By signalling that a step is done before committing the step's results
to the snapshot, the engine was left with a race where dependent
resources could find themselves completely executed and committed before
a resource that they depend on has been committed.
Fixespulumi/pulumi#1726
* Fix an issue with Replace steps at the end of a plan
If the last step that was executed successfully was a Replace, we could
end up in a situation where we unintentionally left the snapshot
invalid.
* Add a test
* CR: pass context.Context as first parameter to Iterate
* CR: null->nil
This is consistent with the behavior prior to the introduction of Read
steps. In order to avoid a breaking change we must do this check in the
engine itself, which causes a bit of a layering violation: because IDs
are marshaled as raw strings rather than PropertyValues, the engine must
check against the marshaled form of an unknown directly (i.e.
`plugin.UnknownStringValue`).
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
When a resource fails to initialize (i.e., it is successfully created,
but fails to transition to a fully-initialized state), and a user
subsequently runs `pulumi update` without changing that resource, our
CLI will fail to warn the user that this resource is not initialized.
This commit begins the process of allowing our CLI to report this by
storing a list of initialization errors in the checkpoint.
This commit adds CLI support for resource providers to provide partial
state upon failure. For resource providers that model resource
operations across multiple API calls, the Provider RPC interface can now
accomodate saving bags of state for resource operations that failed.
This is a common pattern for Terraform-backed providers that try to do
post-creation steps on resource as part of Create or Update resource
operations.
