* Don't close eventChannel when panicking
The state of the system is completely unknown when panicking and in
general it's not safe to infer whether or not it is safe to close a
channel when in this tate.
* CR feedback
* Spelling
* Introduce Result type to engine
The Result type can be used to signal the failure of a computation due
to both internal and non-internal reasons. If a computation failed due
to an internal error, the Result type carries that error with it and
provides it when the 'Error' method on a Result is called. If a
computation failed gracefully, but wished to bail instead of continue a
doomed plan, the 'Error' method provides a value of null.
* CR feedback
We generally want examples and apps to be authored such that they are
clonable/deployable as-is without using new/up (and want to
encourage this). That means no longer using the ${PROJECT} and
${DESCRIPTION} replacement strings in Pulumi.yaml and other text files.
Instead, good default project names and descriptions should be specified
in Pulumi.yaml and elsewhere.
We'll use the specified values as defaults when prompting the user, and
then directly serialize/save the values to Pulumi.yaml when configuring
the user's project. This does mean that name in package.json (for nodejs
projects) won't be updated if it isn't using ${PROJECT}, but that's OK.
Our templates in the pulumi/templates repo will still use
${PROJECT}/${DESCRIPTION} for now, to continue to work well with v0.15
of the CLI. After that version is no longer in use, we can update the
templates to no longer use the replacement strings and delete the code
in the CLI that deals with it.
This change implements the same preview behavior we have for
cloud stacks, in pkg/backend/httpbe, for local stacks, in
pkg/backend/filebe. This mostly required just refactoring bits
and pieces so that we can share more of the code, although it
does still entail quite a bit of redundancy. In particular, the
apply functions for both backends are now so close to being
unified, but still require enough custom logic that it warrants
keeping them separate (for now...)
This simply refactors all the display logic out of the
pkg/backend/filestate package. This helps to gear us up to better unify
this logic between the filestate and httpstate backends.
Furthermore, this really ought to be in its own non-backend,
CLI-specific package, but I'm taking one step at a time here.
This change alters the login prompt slightly, so that it is more
obvious that alternative methods exist.
Before this change, we would say:
$ pulumi login
We need your Pulumi account to identify you.
Enter your access token from https://app.pulumi.com/account
or hit <ENTER> to log in using your browser :
After this change, we say this instead:
$ pulumi login
Manage your Pulumi stacks by logging in.
Run `pulumi login --help` for alternative login options.
Enter your access token from https://app.pulumi.com/account
or hit <ENTER> to log in using your browser :
Also updated the help text to advertise this a bit more prominently.
This renames the backend packages to more closely align with the
new direction for them. Namely, pkg/backend/cloud becomes
pkg/backend/httpstate and pkg/backend/local becomes
pkg/backend/filestate. This also helps to clarify that these are meant
to be around state management and so the upcoming refactoring required
to split out (e.g.) the display logic (amongst other things) will make
more sense, and we'll need better package names for those too.
As part of making the local backend more prominent, this changes a few
aspects of how you use it:
* Simplify how you log into a specific cloud; rather than
`pulumi login --cloud-url <url>`, just say `pulumi login <url>`.
* Use a proper URL scheme to denote local backend usage. We have chosen
file://, since the REST API backend is of course always https://.
This means that you can say `pulumi login file://~` to use the local
backend, with state files stored in your home directory. Similarly,
we support `pulumi login file://.` for the current directory.
* Add a --local flag to the login command, to make local logins a
bit easier in the common case of using your home directory. Just say
`pulumi login --local` and it is sugar for `pulumi login file://~`.
* Print the URL for the backend after logging in; for the cloud,
this is just the user's stacks page, and for the local backend,
this is the path to the user's stacks directory on disk.
* Tidy up the documentation for login a bit to be clearer about this.
This is part of pulumi/pulumi#1818.
The existing message put the URL to visit and some explanation text on
the same line, which makes it a little harder to copy only the URL
into a browser. If this extra text ends up being copied as well as the
URL it can lead to failures later, when we try to decode the query
string as part of the OAuth flow.
It's easy enough to fix by just putting the URL on its own line, split
off from the text itself.
Fixes#1832
This changes two things:
1) Per PR feedback, change the text to "N changes found during refresh."
2) Colorize the parenthetical "No resources will be modified" message;
it looked a little odd being plain colored.
This commit reverts most of #1853 and replaces it with functionally
identical logic, using the notion of status message-specific sinks.
In other words, where the original commit implemented ephemeral status
messages by adding an `isStatus` parameter to most of the logging
methdos in pulumi/pulumi, this implements ephemeral status messages as a
parallel logging sink, which emits _only_ ephemeral status messages.
The original commit message in that PR was:
> Allow log events to be marked "status" events
>
> This commit will introduce a field, IsStatus to LogRequest. A "status"
> logging event will be displayed in the Info column of the main
> display, but will not be printed out at the end, when resource
> operations complete.
>
> For example, for complex resource initialization, we'd like to display
> a series of intermediate results: [1/4] Service object created, for
> example. We'd like these to appear in the Info column, but not at the
> end, where they are not helpful to the user.
Previously, we only supported config keys that included a ':' delimiter
in config keys specified in the template manifest and in `-c` flags to
`new` and `up`. This prevented the use of project keys in the template
manifest and made it more difficult to pass such keys with `-c`,
effectively preventing the use of `new pulumi.Config()` in project code.
This change fixes this by allowing config keys that don't have a
delimiter in the template manifest and `-c` flags. In such cases, the
project name is automatically prepended behind the scenes, the same as
what `pulumi config set` does.
The pattern we are using here is generally prone to error, so I hope we find a way to move away from this more generally - but for now we need to be able to configure more of these in places we are using `With`.
Also remove some `+""` that are tripping up the linter for me locally.
- Create all refresh steps before issuing any. This is important as the
state update loop expects all steps to exist.
- Check for cancellation later in the refresher.
This also fixes races in the SnapshotManager and the test journal that
could cause panics during cancellation.
The wording for refresh doesn't accurately convey that the operations
aren't actually mutating your resources, but instead are simply changing
your checkpoint state. This change (hopefully) helps in two ways:
First, put text just before the prompt:
Do you want to perform this refresh?
No resources will be modified as part of this refresh; just your stack's state will be.
Second, alter the summary ever-so-slightly, from:
info: 2 changes performed:
~ 2 resources updated
3 resources unchanged
to:
info: 2 changes refreshed:
~ 2 resources updated
3 resources unchanged
This reads just slightly better, and removes any sense of panic I might
have otherwise had that my refresh just did something wrong.
As I was in here, since I had to pass UpdateKind information to new
places, I cleaned up the situation where we had three mostly-similar
enums (but which actually diverged) and several areas where we were
using untyped strings for this same information. Now there's just one.
This fixespulumi/pulumi#1551.
This commit will greatly improve the experience of dealing with partial
failures by simply re-trying to initialize the relevant resources on
every subsequent `pulumi up`, instead of printing a list of reasons the
resource had previously failed to initialize.
As motivation, consider our behavior in the following common, painful
scenario:
* The user creates a `Service` and a `Deployment`.
* The `Pod`s in the `Deployment` fail to become live. This causes the
`Service` to fail, since it does not target any live `Pod`s.
* The user fixes the `Deployment`. A run of `pulumi up` sees the
`Pod`s successfully initialize.
* Users will expect that the `Service` is now in a state of success,
as the `Pod`s it targets are alive. But, because we don't update the
`Service` by default, it perpetually exists in a state of error.
* The user is now required to change some trivial feature of the
`Service` just to trigger an update, so that we can see it succeed.
There are many situations like this. Another very common one is waiting
for test `Pod`s that are meant to successfully complete when some object
becomes live.
By triggering an empty update step for all resources that have any
initialization errors, we avoid all problems like this.
This commit will implement this empty-update semantics for partial
failures, as well as fix the display UX to correctly render the diff in
these cases.
Often when the test fails, you'll want to use the web console to
investigate the stack, looking at detailed log messages, for
example. But since we always delete the stack today, you often can't.
Stop running `pulumi stack rm` when the test fails, however do run a
`pulumi destroy` so we at least clean up any resources the stack may
have allocated during testing.
Fixes#1722
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
The fact that we include the `:config:` portion of a configuration
name when sending to the service is an artifact of history. It was
needed back when we needed to support deploying using a new CLI
against a PPC that had older packages embeded in it.
We don't have that sort of problem anymore, so we can stop sending
this data.
* Show a better error message when decrypting fails
It is most often the case that failing to decrypt a secret implies that
the secret was transferred from one stack to another via copying the
configuration. This commit introduces a better error message for this
case and instructs users to explicitly re-encrypt their encrypted keys
in the context of the new stack.
* Spelling
* CR: Grammar fixes
These changes simplify a couple aspects of plan execution in the hopes of
clarifying some responsibilities and preparing the code for changes to the
implementation of refresh.
1. All aspects of plan execution are now managed by the plan executor,
which is no longer exported. Instead, it is abstracted behind
`Plan.Execute`.
2. The plan executor's error-handling and reporting have been unified
and simplified somewhat.
* Log errors coming from the language host
Similar to pulumi/pulumi#1762, fixespulumi/pulumi#1775. The language
host can fail without issuing any diagnostics and it is very unclear
what happens if the engine does not log the error.
* CR feedback
A checkpoint write is unnecessary if it does not change the semantics of
the data currently stored in the checkpoint. We currently perform
unnecessary checkpoint writes in two cases:
- Same steps where no aspect of the resource's state has changed
- Replace steps, which exist solely for display purposes
The former case is particularly bothersome, as it is rather common to
run updates--especially in CI--that consist largely/entirely of these
same steps.
These changes eliminate the checkpoint writes we perform in these two
cases. Some care is needed to ensure that we continue to write the
checkpoint in the case of same steps that do represent meaningful
changes (e.g. changes to a resource's output properties or
dependencies).
Fixes#1769.
The glog package force the use of golang's underyling flag package,
which Cobra does not use. To work around this, we had a complicated
dance around defining flags in multiple places, calling flag.Parse
explicitly and then stomping values in the flag package with values we
got from Cobra.
Because we ended up parsing parts of the command line twice, each with
a different set of semantics, we ended up with bad UX in some
cases. For example:
`$ pulumi -v=10 --logflow update`
Would fail with an error message that looked nothing like normal CLI
errors, where as:
`$ pulumi -v=10 update --logflow`
Would behave as you expect. To address this, we now do two things:
- We never call flag.Parse() anymore. Wacking the flags with values we
got from Cobra is sufficent for what we care about.
- We use a forked copy of glog which does not complain when
flag.Parse() is not called before logging.
Fixes#301Fixes#710Fixes#968
1. 'readID' was never assigned to and was always the default value,
leading the refresh source to believe a resource was deleted
2. The refresh source could hang when a resource is deleted.
The plan executor assumed that the step generator was responsible for
logging its own diagnostics, which it sort-of is but also doesn't log a
majority of the diagnositcs that come out of it. This commit logs all
errors coming out of step generation so that we don't unintentionally
drop errors.
