### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
74 lines
4.2 KiB
Protocol Buffer
74 lines
4.2 KiB
Protocol Buffer
// Copyright 2016-2018, Pulumi Corporation.
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
syntax = "proto3";
|
|
|
|
import "google/protobuf/empty.proto";
|
|
import "google/protobuf/struct.proto";
|
|
import "provider.proto";
|
|
|
|
package pulumirpc;
|
|
|
|
// ResourceMonitor is the interface a source uses to talk back to the planning monitor orchestrating the execution.
|
|
service ResourceMonitor {
|
|
rpc Invoke(InvokeRequest) returns (InvokeResponse) {}
|
|
rpc ReadResource(ReadResourceRequest) returns (ReadResourceResponse) {}
|
|
rpc RegisterResource(RegisterResourceRequest) returns (RegisterResourceResponse) {}
|
|
rpc RegisterResourceOutputs(RegisterResourceOutputsRequest) returns (google.protobuf.Empty) {}
|
|
}
|
|
|
|
// ReadResourceRequest contains enough information to uniquely qualify and read a resource's state.
|
|
message ReadResourceRequest {
|
|
string id = 1; // the ID of the resource to read.
|
|
string type = 2; // the type of the resource object.
|
|
string name = 3; // the name, for URN purposes, of the object.
|
|
string parent = 4; // an optional parent URN that this child resource belongs to.
|
|
google.protobuf.Struct properties = 5; // optional state sufficient to uniquely identify the resource.
|
|
repeated string dependencies = 6; // a list of URNs that this read depends on, as observed by the language host.
|
|
string provider = 7; // an optional reference to the provider to use for this read.
|
|
}
|
|
|
|
// ReadResourceResponse contains the result of reading a resource's state.
|
|
message ReadResourceResponse {
|
|
string urn = 1; // the URN for this resource.
|
|
google.protobuf.Struct properties = 2; // the state of the resource read from the live environment.
|
|
}
|
|
|
|
// RegisterResourceRequest contains information about a resource object that was newly allocated.
|
|
message RegisterResourceRequest {
|
|
string type = 1; // the type of the object allocated.
|
|
string name = 2; // the name, for URN purposes, of the object.
|
|
string parent = 3; // an optional parent URN that this child resource belongs to.
|
|
bool custom = 4; // true if the resource is a custom, managed by a plugin's CRUD operations.
|
|
google.protobuf.Struct object = 5; // an object produced by the interpreter/source.
|
|
bool protect = 6; // true if the resource should be marked protected.
|
|
repeated string dependencies = 7; // a list of URNs that this resource depends on, as observed by the language host.
|
|
string provider = 8; // an optional reference to the provider to manage this resource's CRUD operations.
|
|
}
|
|
|
|
// RegisterResourceResponse is returned by the engine after a resource has finished being initialized. It includes the
|
|
// auto-assigned URN, the provider-assigned ID, and any other properties initialized by the engine.
|
|
message RegisterResourceResponse {
|
|
string urn = 1; // the URN assigned by the engine.
|
|
string id = 2; // the unique ID assigned by the provider.
|
|
google.protobuf.Struct object = 3; // the resulting object properties, including provider defaults.
|
|
bool stable = 4; // if true, the object's state is stable and may be trusted not to change.
|
|
repeated string stables = 5; // an optional list of guaranteed-stable properties.
|
|
}
|
|
|
|
// RegisterResourceOutputsRequest adds extra resource outputs created by the program after registration has occurred.
|
|
message RegisterResourceOutputsRequest {
|
|
string urn = 1; // the URN for the resource to attach output properties to.
|
|
google.protobuf.Struct outputs = 2; // additional output properties to add to the existing resource.
|
|
}
|