Clang (10) has no trouble optimizing the COLORREF conversion operator to
a simple 32-bit load with mask (!) even though it's a series of bit
shifts across multiple struct members.
MSVC (19.24) doesn't make the same optimization decision, and it emits
three 8-bit loads and some shifting.
In any case, the optimization only applies at -O2 (clang) and above.
In this commit, we leverage the spec-legality of using unions for type
conversions and the overlap of four uint8_ts and a uint32_t to make the
conversion very obvious to both compilers.
x86_64 msvc | O0 | O1 | O2
------------|----|----|--------------------
shifts | 12 | 11 | 11 (fully inlined)
union | 5 | 1 | 1 (fully inlined)
x86_64 clang | O0 | O1 | O2 + O3
-------------|----|----|--------------------
shifts | 14 | 5 | 1 (fully inlined)
union | 9 | 3 | 1 (fully inlined)
j4james brought up some concerns about til::color's minor wastefulness
in https://github.com/microsoft/terminal/pull/7578#discussion_r487355989.
This is a clear, simple transformation that saves us a few instructions
in a relatively common case, so I'm accepting a micro-optimization even
though we don't have data showing this to be a hot spot.
Now that CascadiaSettings is a WinRT object, we need to update the error
handling a bit. Making it a WinRT object limits our errors to be
hresults. So we moved all the error handling down a layer to when we
load the settings object.
- Warnings encountered during validation are saved to `Warnings()`.
- Errors encountered during validation are saved to `GetLoadingError()`.
- Deserialization errors (mainly from JsonUtils) are saved to
`GetDeserializationErrorMessage()`.
## References
#7141 - CascadiaSettings is a settings object
#885 - this makes ripping out CascadiaSettings into
TerminalSettingsModel much easier
## Validation Steps Performed
* [x] Tests passed
- [x] Deployment succeeded
- tested with invalid JSON (deserialization error)
- tested with missing DefaultProfile (validation error)
If a user clicks a link that is either invalid (cannot be parsed) or has
a scheme we do not support (like file or mailto (for now)), we open up a
dialog box telling them the issue.
References #5001
- Render hyperlinks with a dashed underline
- Render hovered hyperlinks with a solid underline
- Show URI tooltip on hover
TermControl now has a canvas that contains a tiny border to which a
tooltip is attached. When we hover over hyperlinked text, we move the
border to the mouse location and update the tooltip content with the
URI.
Introduced a new underline type (HyperlinkUnderline), supports rendering
for it, and uses it to render hyperlinks. HyperlinkUnderline is usually
a dashed underline, but when a link is hovered, all text with the same
hyperlink ID is rendered with a solid underline.
References #5001
This fixes an issue where two CPRs could end up corrupted in the input
buffer. An application that sent two CPRs back-to-back could
end up reading the first few characters of the first prepended CPR
before handing us another CPR. We would dutifully prepend it to the
buffer, causing them to overlap.
```
^[^[2;2R[1;1R
^^ ^^^^^ First CPR
^^^^^^ Second CPR
```
The end result of this corruption is that a requesting application
would receive an unbidden `R` on stdin; for vim, this would trigger
replace mode immediately on startup.
Response prepending was implemented in !997738 without much comment.
There's very little in the way of audit trail as to why we switched.
Michael believes that we wanted to make sure that applications got DSR
responses immediately. It had the unfortunate side effect of causing
subsequence CPRs across cursor moves to come out in the wrong order.
I discussed our options with him, and he suggested that we could
implement a priority queue in InputBuffer and make sure that "response"
input was dispatched to a client application before any application- or
user-generated input. This was deemed to be too much work.
We decided that DSR responses getting top billing was likely to be a
stronger guarantee than most terminals are capable of giving, and that
we should be fine if we just switch it back to append.
Thanks to @k-takata, @tekki and @brammool for the investigation on the
vim side.
Fixes#1637.
This commit leverages C++/WinRT's final_release [extension point] to
pull the final destruction of ConptyConnection off onto a background
thread.
We've been seeing some deadlocks during teardown where the output thread
(holding the last owning reference to the connection) was trying to
destruct the threadpool wait while the threadpool wait was
simultaneously running its callback and waiting for the output thread to
terminate. It turns out that trying to release a threadpool wait while
it's running a callback that's blocked on you will absolutely result in
a deadlock.
Fixes#7392.
[extension point]: https://devblogs.microsoft.com/oldnewthing/20191018-00/?p=103010
CascadiaSettings is now a WinRT object in the TerminalApp project.
## References
#7141 - CascadiaSettings is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
This one _looks_ big, but most of it is really just propagating the
changes to the tests. In fact, you can probably save yourself some time
because the tests were about an hour of Find&Replace.
`CascadiaSettings::GetCurrentAppSettings()` was only being used in
Pane.cpp. So I ripped out the 3 lines of code and stuffed them in there.
Follow-up work:
- There's a few places in AppLogic where I `get_self` to be able to get
the warnings out. This will go away in the next PR (wrapping up #885)
## Validation Steps Performed
- [x] Tests passed
- [X] Deployment succeeded
Closes#7141
By setting the jumplist entries to launch `WindowsTerminal.exe` out of
the package root, we've inadvertently made WindowsTerminalDev emit jump
list entries that launch the _unpackaged_ version of Terminal.
We can fix this by copying the code from the shell extension that
determines which version of the executable to launch -- wt, wtd or
WindowsTerminal -- depending on the context under which it was invoked.
Fixes#7554
Conhost expands UIA text ranges when moved. This means that degenerate
ranges become non-degenerate after movement, leading to odd behaviour
from UIA clients. This PR doesn't expand degenerate ranges, but rather
keeps them degenerate by moving `_end` to the newly-changed `_start`.
Tested in the NVDA Python console (cases with `setEndPoint` and
`compareEndPoints` described in #7342). Also ran the logic by
@michaeldcurran.
Closes#7342
Almost definitely addresses nvaccess/nvda#11288 (although I'll need to
test with my Braille display). Also fixes an issue privately reported to
me by @simon818 with copy/paste from review cursor which originally lead
me to believe the issue was with `moveEndPointByRange`.
This PR is about the behavior of DECSCUSR. This PR changes the meaning
of DECSCUSR 0 to restore the cursor style back to user default. This
differs from what VT spec says but it’s used in popular terminal
emulators like iTerm2 and VTE-based ones. See #1604.
Another change is that for parameter greater than 6, DECSCUSR should be
ignored, instead of restoring the cursor to legacy. This PR fixes it.
See #7382.
Fixes#1604.
This commit introduces Jumplist customization and an item for each
profile to the Jumplist. Selecting an entry in the jumplist will pretty
much just execute `wt.exe -p "{profile guid}"`, and so a new Terminal
will open with the selected profile.
Closes#576
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp dd0c54d9abd94dea1ffe956373a4c20b30a6151e
Related work items: MSFT-26187783
When attempting to select a text range from a different text buffer (such as a standard text range when in alt mode), conhost crashes. This PR checks for this case and returns `E_FAIL` instead, preventing this crash.
## PR Checklist
* [x] Closes unfiled crash issue
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Passes manual test below
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Ran the following lines in the NVDA Python console (NVDA+control+z) before and after this PR, and observed that Conhost no longer crashes after the change:
``` Python console
>>> # SSH to a remote Linux system
>>> ti=nav.makeTextInfo("caret")
>>> ti.move("line", -2)
-2
>>> # Switch away from the NVDA Python console, and run Nano in conhost. Then:
>>> ti.updateSelection() # Calls select() on the underlying UIA text range
Traceback (most recent call last):
File "<console>", line 1, in <module>
File "NVDAObjects\UIA\__init__.pyc", line 790, in updateSelection
File "comtypesMonkeyPatches.pyc", line 26, in __call__
_ctypes.COMError: (-2147220991, 'An event was unable to invoke any of the subscribers', (None, None, None, 0, None))
```
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Conhost can now support OSC8 sequences (as specified [here](https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda)). Terminal also supports those sequences and additionally hyperlinks can be opened by Ctrl+LeftClicking on them.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#204
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Closes#204
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Added support to:
- parse OSC8 sequences and extract URIs from them (conhost and terminal)
- add hyperlink uri data to textbuffer/screeninformation, associated with a hyperlink id (conhost and terminal)
- attach hyperlink ids to text to allow for uri extraction from the textbuffer/screeninformation (conhost and terminal)
- process ctrl+leftclick to open a hyperlink in the clicked region if present
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Open up a PowerShell tab and type
```PowerShell
${ESC}=[char]27
Write-Host "${ESC}]8;;https://github.com/microsoft/terminal${ESC}\This is a link!${ESC}]8;;${ESC}\"
```
Ctrl+LeftClick on the link correctly brings you to the terminal page on github
GlobalAppSettings is now a WinRT object in the TerminalApp project.
## References
#7141 - GlobalAppSettings is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
## PR Checklist
* [x] Tests passed
## Detailed Description of the Pull Request / Additional comments
This one was probably the easiest thus far.
The only weird thing is how we handle InitialPosition. Today, we lose a
little bit of fidelity when we convert from LaunchPosition (int) -->
Point (float) --> RECT (long). The current change converts
LaunchPosition (optional<long>) --> InitialPosition (long) --> RECT
(long).
NOTE: Though I could use LaunchPosition to go directly from TermApp to
AppHost, I decided to introduce InitialPosition because LaunchPosition
will be a part of TerminalSettingsModel soon.
## Validation Steps Performed
- [x] Tests passed
- [x] Deployment succeeded
Profile is now a WinRT object in the TerminalApp project.
As with ColorScheme, all of the serialization logic is not exposed via
the idl. TerminalSetingsModel will handle it when it's all moved over.
I removed the "Get" and "Set" prefixes from all of the Profile
functions. It just makes more sense to use the `GETSET_PROPERTY` macro
to do most of the work for us.
`CloseOnExitMode` is now an enum off of the Profile.idl.
`std::optional<wstring>` got converted to `hstring` (as opposed to
`IReference<hstring>`). `IReference<hstring>` is not valid to MIDL.
## References
#7141 - Profile is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
## Validation Steps Performed
- [x] Tests passed
- [x] Deployment succeeded
Closes#7435
Dustin L. Howett
* Clear the last error before calling Mb2Wc in ConvertToW (GH-7391)
* Update clang-format to 10.0 (GH-7389)
* Add til::static_map, a constexpr key-value store (GH-7323)
James Holderness
* Refactor VT control sequence identification (CC-7304)
Mike Griese
* Compensate for VS 16.7, part 2 (GH-7383)
* Add support for iterable, nested commands (GH-6856)
Michael Niksa
* Helix Testing (GH-6992)
* Compensate for new warnings and STL changes in VS 16.7 (GH-7319)
nathpete-msft
* Fix environment block creation (GH-7401)
Chester Liu
* Add initial support for VT DCS sequences (CC-6328)
Related work items: #28791050
## Summary of the Pull Request
The `index` action argument is now optional for `closeOtherTabs` and `closeTabsAfter`. When `index` is not defined, `index` is set to the focused tab's index.
Also, adds the non-index version of these actions to defaults.json.
## PR Checklist
* [X] Closes#7181
* [X] CLA signed
* [X] Tests passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [X] Schema updated.
## Validation Steps Performed
Opened 4 tabs and ran closeOtherTabs/closeTabsAfter from command palette.
This fixes a regression in environment variable loading introduced as part
of the new environment block creation that prevents some system-defined,
volatile environment variables from being defined.
## References
https://github.com/microsoft/terminal/pull/7243#discussion_r476603599
## Validation Steps Performed
Manually verified locally.
Closes#7399
## Summary of the Pull Request
Previously, if `altGrAliasing` was disabled, all `Ctrl+Alt` combinations were considered to be aliases of `AltGr` including `AltGr` itself and thus considered as key and not character events. But `AltGr` should not be treated as an alias of itself of course, as that prevents one from entering `AltGr` combinations entirely.
## PR Checklist
* [x] Closes#7372
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* Activate a German keyboard layout
* Run `showkey -a` in WSL
* **Ensure** that `AltGr+Q` produces `@`
* **Ensure** that `Ctrl+Alt+Q` produces `@`
* Disable `altGrAliasing`
* **Ensure** that `AltGr+Q` produces `@`
* **Ensure** that `Ctrl+Alt+Q` produces `^[^Q`
When the console functional tests are running on OneCoreUAP, the
newly-introduced (65bd4e327, #4309) FillOutputCharacterA tests will
actually fail because of radio interference on the return value of GLE.
Fixes MSFT-28163465
This commit removes our local copy of clang-format 8 and replaces it
with a newly-built nuget package containing clang-format 10.
This resolves the inconsistency between our version of clang-format and
the one shipped in Visual Studio.
A couple minor format changes were either required or erroneously forced
upon us--chief among them is a redistribution of `*`s around SAL
annotations in inline class members of COM classes. Don't ask why; I
couldn't figure it out.
We had some aspirational goals for our formatting, which were left in
but commented out. Enabling them changes our format a little more than
I'm comfortable with, so I uncommented them and locked them to the
format style we've been using for the past year. We may not love it, but
our aspirations may not matter here any longer. Consistent formatting is
better than perfect formatting.
Most applications with scrollable content seem to define the "large
jump" distance as about a screenful of content. You can see this in long
pages in Settings and documents in Notepad.
We just weren't configuring ScrollBar here.
Fixes#7367
## Summary of the Pull Request
Adds support for "commandline mode" to the command palette.
This allows the user to start typing a `wt.exe` commandline directly in the command palette, to run that commandline directly in the current window. This allows the user input something like `> nt -p Ubuntu ; sp -p ssh` and open up a new tab and split it _in the current window_.
## References
* cmdpal megathread: #5400
* Kinda related to #4472
* built with the `wt` action from #6537
## PR Checklist
* [x] Closes#6677
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated - sure does, when the cmdpal docs are written in the first place :P
## Validation Steps Performed
Tested manually
## Summary of the Pull Request
Adds support for setting a command's `icon`. This supports a couple different scenarios:
* setting a path to an image
* on `"iterateOn": "profiles"` commands, setting the icon to `${profile.icon}` (to use the profile's icon)
* setting the icon to a symbol from [Segoe MDL2 Assets](https://docs.microsoft.com/en-us/windows/uwp/design/style/segoe-ui-symbol-font)
* setting the icon to an emoji
* setting the icon to a character (what is an emoji other than a character, after all?)
## References
* Big s/o to @leonMSFT in #6732, who really did all the hard work here.
## PR Checklist
* [x] Closes#6644
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Importantly, the creation of these icons must occur on the UI thread. That's why it's done in a "load the path from json", then "get the actual IconSource" structure.
## Validation Steps Performed
see the gif
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR splits the anchored and unanchored tab switcher into two. The anchored tab switcher is now baked into `nextTab`/`prevTab`, and the unanchored tab switcher command is just named `tabSearch`. `tabSearch` takes no arguments. To reflect this distinction, `CommandPalette.cpp` now refers to one as `TabSwitchMode` and the other as `TabSearchMode`.
I've added a global setting named `useTabSwitcher` (name up for debate) that makes the Terminal use the anchored tab switcher experience for `nextTab` and `prevTab`.
I've also given the control the ability to detect <kbd>Alt</kbd> KeyUp events and to dispatch keybinding events. By listening for keybindings, the ATS can react to `nextTab`/`prevTab` invocations for navigation in addition to listening for <kbd>tab</kbd> and the arrow keys.
Closes#7178
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] CLA signed.
* [x] Documentation updates: microsoftdocs/terminal#107
* [x] Schema updated.
## Summary of the Pull Request
Adds a pair of top-level commands that both have nested, iterable sub-commands. The "New Tab..." command has one child for each profile, and will open a new tab for that profile. The "Split Pane..." command similarly has a nested command for each profile, and also has a nested command for split auto/horizontal/vertical.
## References
* megathread: #5400
* Would look better with icons from #6644
## PR Checklist
* [x] Closes#7174
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
The easiest fix was actually just moving all the source files from
`TerminalApp` to `TerminalApp/lib`, where the appropriate `pch.h`
actually resides.
Closes#6866
In #6532, we thought it would be a good idea to add "bindings" as an
overload for "keybindings", as we were no longer going to use the
keybindings array for just keybindings. We were going to add commands.
So we started secretly treating `"bindings"` the same as
`"keybindings"`.
Then, in #7175, we discussed using "actions" as the key for the list of
commands/keybindings/global actions, instead of using "bindings". We're
going to be using this array as the global list of all actions, so it
makes sense to just call it `"actions"`.
This PR renames "bindings" to "actions". Fortunately, we never
documented the "bindings" overload in the first place, so we can get
away with this safely, and preferably before we ship "bindings" for too
long.
References #6899
#6989 forgot to add `togglePaneZoom` to the schema, so this does that.
WHILE I'M HERE:
* The action names in the schema and the actual source were both in _random_ order, so I sorted them alphabetically.
* I also added an unbound `togglePaneZoom` command to defaults.json, so users can use that command from the cmdpal w/o binding it manually.
Activating a template doesn't actually process conditions. Only jobs, stages, and tasks can process a condition. So specify the full condition in the parent template call as a parameter and ask the child job (who can actually evaluate the condition) to use that parameter to determine if it should run.
## Summary of the Pull Request
Allows for creating commands that iterate over the user's color schemes. Also adds a top-level nested command to `defaults.json` that allows the user to select a color scheme (pictured above). I'm not sure there are really any other use cases that make sense, but it _really_ makes sense for this one.
## References
* #5400 - cmdpal megathread
* made possible by #6856, _and support from viewers like you._
* All this is being done in pursuit of #6689
## PR Checklist
* [x] Closes wait what? I could have swore there was an issue for this one...
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - okay maybe now I'll write some docs
## Detailed Description of the Pull Request / Additional comments
Most of the hard work for this was already done in #6856. This is just another thing to iterate over.
## Validation Steps Performed
* Played with this default command. It works great.
* Added tests.
Adds the ability to set the selection background opacity when setting the
selection background. This also exposes the selection background and alpha
through the terminal WPF container.
