## Summary of the Pull Request
Reduce the number of times we dispatch a cursor changed event. We were firing it every time the renderer had to do anything related to the cursor. Unfortunately, blinking the cursor triggered this behavior. Now we just check if the position has changed.
## PR Checklist
* [X] Closes#5143
## Validation Steps Performed
Verified using Narrator
Also verified #3791 still works right
## Summary of the Pull Request
Moves the ConPTY drawing mechanism (`VtRenderer`) to use the fine-grained `til::bitmap` individual-dirty-bit tracking mechanism instead of coarse-grained rectangle unions to improve drawing performance by dramatically reducing the total area redrawn.
## PR Checklist
* [x] Part of #778 and #1064
* [x] I work here
* [x] Tests added and updated.
* [x] I'm a core contributor
## Detailed Description of the Pull Request / Additional comments
- Converted `GetDirtyArea()` interface from `IRenderEngine` to use a vector of `til::rectangle` instead of the `SMALL_RECT` to banhammer inclusive rectangles.
- `VtEngine` now holds and operates on the `til::bitmap` for invalidation regions. All invalidation operation functions that used to be embedded inside `VtEngine` are deleted in favor of using the ones in `til::bitmap`.
- Updated `VtEngine` tracing to use new `til::bitmap` on trace and the new `to_string()` methods detailed below.
- Comparison operators for `til::bitmap` and complementary tests.
- Fixed an issue where the dirty rectangle shortcut in `til::bitmap` was set to 0,0,0,0 by default which means that `|=` on it with each `set()` operation was stretching the rectangle from 0,0. Now it's a `std::optional` so it has no value after just being cleared and will build from whatever the first invalidated rectangle is. Complementary tests added.
- Optional run caching for `til::bitmap` in the `runs()` method since both VT and DX renderers will likely want to generate the set of runs at the beginning of a frame and refer to them over and over through that frame. Saves the iteration and creation and caches inside `til::bitmap` where the chance of invalidation of the underlying data is known best. It is still possible to iterate manually with `begin()` and `end()` from the outside without caching, if desired. Complementary tests added.
- WEX templates added for `til::bitmap` and used in tests.
- `translate()` method for `til::bitmap` which will slide the dirty points in the direction specified by a `til::point` and optionally back-fill the uncovered area as dirty. Complementary tests added.
- Moves all string generation for `til` types `size`, `point`, `rectangle`, and `some` into a `to_string` method on each object such that it can be used in both ETW tracing scenarios AND in the TAEF templates uniformly. Adds a similar method for `bitmap`.
- Add tagging to `_bitmap_const_iterator` such that it appears as a valid **Input Iterator** to STL collections and can be used in a `std::vector` constructor as a range. Adds and cleans up operators on this iterator to match the theoretical requirements for an **Input Iterator**. Complementary tests added.
- Add loose operators to `til` which will allow some basic math operations (+, -, *, /) between `til::size` and `til::point` and vice versa. Complementary tests added. Complementary tests added.
- Adds operators to `til::rectangle` to allow scaling with basic math operations (+, -, *) versus `til::size` and translation with basic math operations (+, -) against `til::point`. Complementary tests added.
- In-place variants of some operations added to assorted `til` objects. Complementary tests added.
- Update VT tests to compare invalidation against the new map structure instead of raw rectangles where possible.
## Validation Steps Performed
- Wrote additional til Unit Tests for all additional operators and functions added to the project to support this operation
- Updated the existing VT renderer tests
- Ran perf check
## Summary of the Pull Request
This notifies automation clients (i.e.: NVDA, narrator, etc...) of new output being rendered to the screen.
## References
Close#2447 - Signaling for new output and cursor
Close#3791 - fixed by signaling cursor changes
## Detailed Description of the Pull Request / Additional comments
- Added tracing for UiaRenderer. This makes it easier to debug issues with notifying an automation client.
- Fire TextChanged automation events when new content is output to the screen.
## Validation Steps Performed
Verified with NVDA [1]
## Narrator
Narrator works _better_, but is unable to detect new output consistently. There is no harm for narrator when this change goes in.
[1] https://github.com/microsoft/terminal/issues/2447#issuecomment-595879890
## Summary of the Pull Request
- Changes the `IRenderEngine` interface to return a vector of values instead of just a single one. Engines that want to report one still can. Engines that want to report multiple smaller ones will be able to do so going forward.
## PR Checklist
* [x] In support of differential rendering #778
* [x] I work here.
* [x] Manually tested it still works.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
- Some of my ideas for the `DxEngine` require the ability to specify multiple smaller rectangles instead of one giant one, specifically to mitigate the case where someone refreshes just one cell in two opposite corners of the display (which currently coalesces into refreshing the entire display.)
- This is pulled out into an individual PR to make it easier to review that concept changing.
## Validation Steps Performed
- Ran the Terminal
## Summary of the Pull Request
Changes how conpty emits text to preserve line-wrap state, and additionally adds rudimentary support to the Windows Terminal for wrapped lines.
## References
* Does _not_ fix (!) #3088, but that might be lower down in conhost. This makes wt behave like conhost, so at least there's that
* Still needs a proper deferred EOL wrap implementation in #780, which is left as a todo
* #4200 is the mega bucket with all this work
* MSFT:16485846 was the first attempt at this task, which caused the regression MSFT:18123777 so we backed it out.
* #4403 - I made sure this worked with that PR before I even sent #4403
## PR Checklist
* [x] Closes#405
* [x] Closes#3367
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I started with the following implementation:
When conpty is about to write the last column, note that we wrapped this line here. If the next character the vt renderer is told to paint get is supposed to be at the start of the following line, then we know that the previous line had wrapped, so we _won't_ emit the usual `\r\n` here, and we'll just continue emitting text.
However, this isn't _exactly_ right - if someone fills the row _exactly_ with text, the information that's available to the vt renderer isn't enough to know for sure if this line broke or not. It is possible for the client to write a full line of text, with a `\n` at the end, to manually break the line. So, I had to also add the `lineWrapped` param to the `IRenderEngine` interface, which is about half the files in this changelist.
## Validation Steps Performed
* Ran tests
* Checked how the Windows Terminal behaves with these changes
* Made sure that conhost/inception and gnome-terminal both act as you'd expect with wrapped lines from conpty
Generated by https://github.com/jsoref/spelling `f`; to maintain your repo, please consider `fchurn`
I generally try to ignore upstream bits. I've accidentally included some items from the `deps/` directory. I expect someone will give me a list of items to drop, I'm happy to drop whole files/directories, or to split the PR into multiple items (E.g. comments/locals/public).
Closes#4294
This PR makes use of the UiaRenderer by attaching it to the TerminalControl and setting up selectionChanged events for accessibility.
Part 1: attaching the UiaRenderer
The uiaRenderer is treated very similarly to the dxRenderer. We have a unique_ptr ref to it in the TermControl. This gets populated when the TermControlAutomationPeer is created (thus enabling accessibility).
To prevent every TermControl from sending signals simultaneously, we specifically only enable whichever one is in an active pane.
The UiaRenderer needs to send encoded events to the automation provider (in this case, TermControlAutomationPeer). We needed our own automation events so that we can reuse this model for ConHost. This is the purpose of IUiaEventDispatcher.
We need a dispatcher for the UiaRenderer. Otherwise, we would do a lot of work to find out when to fire an event, but we wouldn't have a way of doing that.
Part 2: hooking up selection events
This provides a little bit of polish to hooking it up before. Primarily to actually make it work. This includes returning S_FALSE instead of E_NOTIMPL.
The main thing here really is just how to detect if a selection has changed. This also shows how clean adding more events will be in the future!
This commit cleans up and deduplicates all of the common build
preamble/postamble across exe, dll, lib and c++/winrt projects.
The following specific changes have been made:
* All projects now define their ConfigurationType
* All projects now set all their properties *before* including a common
build file (or any other build files)
* cppwinrt.pre and cppwinrt.post now delegate most of their
configuration to common.pre and common.post
* (becuase of the above,) all build options are conserved between
console and c++/winrt components, including specific warnings and
preprocessor definitions.
* More properties that are configurable per-project are now
conditioned so the common props don't override them.
* The exe, dll, exe.or.dll, and lib postincludes have been merged into
pre or post and switched based on condition as required
* Shared items (-shared, -common) are now explicitly vcxitems instead of
vcxproj files.
* The link line is now manipulated after Microsoft.Cpp sets it, so the
libraries we specify "win". All console things link first against
onecore_apiset.lib.
* Fix all compilation errors caused by build unification
* Move CascadiaPackage's resources into a separate item file
Fixes#922.
As a part of setting up UIA Events, we need to be able to identify WHEN to notify the client. We'll be adopting the RendererEngine model that the VTRenderer and DxRenderer follow to identify when something on the screen is changing and what to alert the automation clients about.
This PR just introduces the UiaRenderer. There's a lot of E_NOTIMPLs and S_FALSEs and a few comments throughout as to my thoughts. This'll make diffing future PRs easier and can make this process more iterative. The code does run with the PR so I plan on merging this into master as normal.
