## Summary of the Pull Request
Introduces convenience type `til::rectangle` which automatically implements our best practices for rectangle-related types and provides automatic conversions in/out of the relevant types.
## PR Checklist
* [x] In support of Differential Rendering #778
* [X] I work here.
* [x] Tests added/passed
* [x] I'm a core contributor.
## Detailed Description of the Pull Request / Additional comments
- Automatically converts in from anything with a Left/Top/Right/Bottom or left/top/right/bottom (Win32 `RECT`)
- Automatically converts Console type `SMALL_RECT` and shifts it from **inclusive** to **exclusive** on instantiation
- Automatically converts out to `SMALL_RECT` (converting back to **inclusive**), `RECT`, or `D2D1_RECT_F`.
- Constructs from bare integers written into source file
- Constructs from a single `til::point` as a 1x1 size rectangle with top-left corner (origin) at that point
- Constructs from a single `til::size` as a WxH size rectangle with top-left corner (origin) at 0,0
- Constructs from a `til::point` and a `til::size` representing the top-left corner and the width by height.
- Constructs from a `til::point` and another `til::point` representing the top-left corner and the **exclusive** bottom-right corner.
- Default constructs to empty
- Uses Chromium numerics for all basic math operations (+, -, *, /)
- Provides equality tests
- Provides `operator bool` to know when it's valid (has an area > 0) and `empty()` to know the contrary
- Accessors for left/top/right/bottom
- Type converting accessors (that use safe conversions and throw) for left/top/right/bottom
- Convenience methods for finding width/height (with Chromium numerics operations) and type-converting templates (with Chromium numerics conversions).
- Accessors for origin (top-left point) and the size/dimensions (as a `til::size`).
- Intersect operation on `operator &` to find where two `til::rectangle`s overlap, returned as a `til::rectangle`.
- Union operation on `operator |` to find the total area covered by two `til::rectangles`, returned as a `til::rectangle`.
- Subtract operation on `operator -` to find the area remaining after one `til::rectangle` is removed from another, returned as a `til::some<til::rectangle, 4>`.
- TAEF/WEX Output and Comparators so they will print very nicely with `VERIFY` and `Log` macros in our testing suite.
- Additional comparators, TAEF/WEX output, and tests written on `til::some` to support the Subtract operation.
- A natvis
## Validation Steps Performed
- See automated tests of functionality.
## Summary of the Pull Request
When the auto-hide taskbar setting is enabled, then we don't
always get another window message to trigger us to remove the drag bar.
So, make sure to update the size of the drag region here, so that it
_definitely_ goes away.
## References
## PR Checklist
* [x] Closes#4224
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Manually tested it
Adds support for setting the cursor visibility in Terminal. Visibility
is a property entirely independent from whether the cursor is "on" or
not. The cursor blinker _should_ change the "IsOn" property. It was
actually changing the "Visible" property, which was incorrect. This PR
additionally corrects the naming of the method used by the cursor
blinker, and makes it do the right thing.
I added a pair of tests, one taken straight from conhost. In
copy-pasting that test, I took it a step further and implemented
`^[[?12h`, `^[[?12l`, which enables/disables cursor blinking, for the
`TerminalCore`. THIS DOES NOT ADD SUPPORT FOR DISABLING BLINKING IN THE
APP. Conpty doesn't emit the blinking on/off sequences quite yet, but
when it _does_, the Terminal will be ready.
## References
* I'd bet this conflicts with #2892
* This isn't a solution for #1379
* There shockingly isn't an issue for cursor blink state via conpty...?
## PR Checklist
* [x] Closes#3093
* [x] Closes#3499
* [x] Closes#4644
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
This changes the renederer to make sure to not draw the cursor when it is placed outside the viewport. When the window height isn't an exact multiple of a row's height, then there's a little bit of space below the last line we're actually drawing. If cursor is on the line below the viewport, then it can actually get drawn into this space. Since we're not drawing the text for that line, this is a little odd.
This PR fixes the issue by simply ensuring the cursor is in the veiwport before we draw it.
## References
## PR Checklist
* [x] Closes#3166
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
Checked with the GDI renderer as well as the DX renderer in conhost to make sure this is fixed for both of them, as well as the Terminal
cmatrix is somewhat of a pathological case for our infrastructure: it
prints out a bunch of green and white characters and then updates them a
million times a second.
It also maintains a column of space between every green character. When
it prints this column, it prints it in "default" or "white". This ends
up making runs of text that look like this:
(def: G=green B=bright white W=white *=matrix char =space)
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
As characters trickle in:
G*W G*W G*W G*W G*W G*W G*W B*W
G*W G*W G*W G*W G*W G*W G*W G W
G*W G*W G*W B*W G*W G*W G*W G W
G*W B*W G*W G W G*W G*W G*W G*W
G*W G W G*W G W G*W B*W G*W G*W
B*W G W G*W G W G*W G W B*W G*W
G W G W G*W G W G*W G W G W B*W
G W G W B*W G W G*W G W G W G W
Every one of those color transitions causes us to break up the run of
text and start rendering it again. This impacts GDI, Direct2D *and*
ConPTY. In the example above, there are 120 runs.
The problem is, printing a space doesn't **use** the foreground color!
This commit introduces an optimization. When we're about to break a text
cluster because its attributes changed, we make sure that it's not just
filled with spaces and doesn't differ in any visually-meaningful way
(like underline or strikethrough, considering global invert state).
This lets us optimize both the rendering _and_ the PTY output to look
like this:
G* * * * * * * B*G
G* * * * * * *
G* * * B*G * * *
G* B*G * * * * *
G* * * B*G * *
B*G * * B*G *
G * * B*G
G B*G *
Text will be printed at best line-by-line and at worst only when the
visible properties of the screen actually change. In the example
above, there are only 21 runs.
This speeds up cmatrix remarkably.
Refs #1064
## Summary of the Pull Request
Make TerminalControl synthesize mouse events and Terminal send them to
the TerminalInput's MouseInput module.
The implementation here takes significant inspiration from how we handle
KeyEvents.
## References
Closes#545 - VT Mouse Mode (Terminal)
References #376 - VT Mouse Mode (ConPty)
### TerminalControl
- `_TrySendMouseEvent` attempts to send a mouse event via TermInput.
Similar to `_TrySendKeyEvent`
- Use the above function to try and send the mouse event _before_
deciding to modify the selection
### TerminalApi
- Hookup (re)setting the various modes to handle VT Input
- Terminal is _always_ in VT Input mode (important for #4856)
### TerminalDispatch
- Hookup (re)setting the various modes to handle VT Input
### TerminalInput
- Convert the mouse input position from viewport position to buffer
position
- Then send it over to the MouseInput in TerminalInput to actually do it
(#4848)
## Validation Steps Performed
Tests should still pass.
This PR adds support for "Resize with Reflow" to the Terminal. In
conhost, `ResizeWithReflow` is the function that's responsible for
reflowing wrapped lines of text as the buffer gets resized. Now that
#4415 has merged, we can also implement this in the Terminal. Now, when
the Terminal is resized, it will reflow the lines of it's buffer in the
same way that conhost does. This means, the terminal will no longer chop
off the ends of lines as the buffer is too small to represent them.
As a happy side effect of this PR, it also fixed#3490. This was a bug
that plagued me during the investigation into this functionality. The
original #3490 PR, #4354, tried to fix this bug with some heavy conpty
changes. Turns out, that only made things worse, and far more
complicated. When I really got to thinking about it, I realized "conhost
can handle this right, why can't the Terminal?". Turns out, by adding
resize with reflow, I was also able to fix this at the same time.
Conhost does a little bit of math after reflowing to attempt to keep the
viewport in the same relative place after a reflow. By re-using that
logic in the Terminal, I was able to fix#3490.
I also included that big ole test from #3490, because everyone likes
adding 60 test cases in a PR.
## References
* #4200 - this scenario
* #405/#4415 - conpty emits wrapped lines, which was needed for this PR
* #4403 - delayed EOL wrapping via conpty, which was also needed for
this
* #4354 - we don't speak of this PR anymore
## PR Checklist
* [x] Closes#1465
* [x] Closes#3490
* [x] Closes#4771
* [x] Tests added/passed
## EDIT: Changes to this PR on 5 March 2020
I learned more since my original version of this PR. I wrote that in
January, and despite my notes that say it was totally working, it
_really_ wasn't.
Part of the hard problem, as mentioned in #3490, is that the Terminal
might request a resize to (W, H-1), and while conpty is preparing that
frame, or before the terminal has received that frame, the Terminal
resizes to (W, H-2). Now, there aren't enough lines in the terminal
buffer to catch all the lines that conpty is about to emit. When that
happens, lines get duplicated in the buffer. From a UX perspective, this
certainly looks a lot worse than a couple lost lines. It looks like
utter chaos.
So I've introduced a new mode to conpty to try and counteract this
behavior. This behavior I'm calling "quirky resize". The **TL;DR** of
quirky resize mode is that conpty won't emit the entire buffer on a
resize, and will trust that the terminal is prepared to reflow it's
buffer on it's own.
This will enable the quirky resize behavior for applications that are
prepared for it. The "quirky resize" is "don't `InvalidateAll` when the
terminal resizes". This is added as a quirk as to not regress other
terminal applications that aren't prepared for this behavior
(gnome-terminal, conhost in particular). For those kinds of terminals,
when the buffer is resized, it's just going to lose lines. That's what
currently happens for them.
When the quirk is enabled, conpty won't repaint the entire buffer. This
gets around the "duplicated lines" issue that requesting multiple
resizes in a row can cause. However, for these terminals that are
unprepared, the conpty cursor might end up in the wrong position after a
quirky resize.
The case in point is maximizing the terminal. For maximizing
(height->50) from a buffer that's 30 lines tall, with the cursor on
y=30, this is what happens:
* With the quirk disabled, conpty reprints the entire buffer. This is
60 lines that get printed. This ends up blowing away about 20 lines
of scrollback history, as the terminal app would have tried to keep
the text pinned to the bottom of the window. The term. app moved the
viewport up 20 lines, and then the 50 lines of conpty output (30
lines of text, and 20 blank lines at the bottom) overwrote the lines
from the scrollback. This is bad, but not immediately obvious, and
is **what currently happens**.
* With the quirk enabled, conpty doesn't emit any lines, but the
actual content of the window is still only in the top 30 lines.
However, the terminal app has still moved 20 lines down from the
scrollback back into the viewport. So the terminal's cursor is at
y=50 now, but conpty's is at 30. This means that the terminal and
conpty are out of sync, and there's not a good way of re-syncing
these. It's very possible (trivial in `powershell`) that the new
output will jump up to y=30 override the existing output in the
terminal buffer.
The Windows Terminal is already prepared for this quirky behavior, so it
doesn't keep the output at the bottom of the window. It shifts it's
viewport down to match what conpty things the buffer looks like.
What happens when we have passthrough mode and WT is like "I would like
quirky resize"? I guess things will just work fine, cause there won't be
a buffer behind the passthrough app that the terminal cares about. Sure,
in the passthrough case the Terminal could _not_ quirky resize, but the
quirky resize won't be wrong.
## Summary of the Pull Request
Introduces convenience type `til::point` which automatically implements our best practices for point-related types and provides automatic conversions in/out of the relevant types.
## PR Checklist
* [x] In support of Differential Rendering #778
* [X] I work here.
* [x] Tests added/passed
* [x] I'm a core contributor.
## Detailed Description of the Pull Request / Additional comments
- Automatically converts in from anything with a X/Y (console `COORD`) or x/y (Win32 `POINT`)
- Automatically converts out to `COORD`, `POINT`, or `D2D1_POINT_2F`.
- Constructs from bare integers written into source file
- Default constructs to empty
- Uses Chromium Math for all basic math operations (+, -, *, /)
- Provides equality tests
- Accessors for x/y
- Type converting accessors (that use safe conversions and throw) for x/y
- TAEF/WEX Output and Comparators so they will print very nicely with `VERIFY` and `Log` macros in our testing suite.
- A natvis
## Validation Steps Performed
- See automated tests of functionality.
When ConPTY encounters a string we don't understand, immediately flush the frame.
## References
This PR supersedes #2665. This solution is much simpler than what was proposed in that PR.
As mentioned in #2665: "This might have some long-term consequences for #1173."
## PR Checklist
* [x] Closes#2011
* [x] Closes#4106
* [x] I work here
* [x] Tests added/passed
## Summary of the Pull Request
Move the contents and functionality of MouseInput from TerminalAdapter
to TerminalInput.
## References
#545 - VT Mouse Mode (Terminal)
#376 - VT Mouse Mode (ConPty)
## Detailed Description of the Pull Request / Additional comments
Pretty straightforward. The MouseInput class was a bit large though so I
split it up into a few files. This should make TerminalInput a bit
easier to manage.
- `mouseInputState`: enable some of the modes for mouse input. All saved
to `_mouseInputState`.
- `mouseInput`: basically just `HandleMouse()` and any helper functions
## Validation Steps Performed
Tests should still pass.
When we had to flush unknown sequences to the terminal, we were only
taking the _most recent run_ with us; therefore, if we received `\e[?12`
and `34h` in separate packets we would _only_ send out `34h`.
This change fixes that issue by ensuring that we cache partial bits of
sequences we haven't yet completed, just in case we need to flush them.
Fixes#3080.
Fixes#3081.
## Summary of the Pull Request
Allows VT engine methods that print formatted strings (cursor movements, color changes, etc.) to provide a guess at the max buffer size required eliminating the double-call for formatting in the common case.
## PR Checklist
* [x] Found while working on #778
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
- The most common case for VT rendering is formatting a few numbers into a sequence. For the most part, we can already tell the maximum length that the string could be based on the number of substitutions and the size of the parameters.
- The existing formatting method would always double-call. It would first call for how long the string was going to be post-formatting, allocate that memory, then call again and fill it up. This cost two full times of running through the string to find a length we probably already knew for the most part.
- Now if a size is provided, we allocate that first and attempt the "second pass" of formatting directly into the buffer. This saves the count step in the common case.
- If this fails, we fall back and do the two-pass method (which theoretically means the bad case is now 3 passes.)
- The next biggest waste of time in this method was allocating and freeing strings for every format pass. Due to the nature of the VT renderer, many things need to be formatted this way. I've now instead moved the format method to hold a static string that really only grows over the course of the session for all of these format operations. I expect a majority of the time, it will only be consuming approximately 5-15 length of a std::string of memory space. I cannot currently see a circumstance where it would use more than that, but I'm consciously trading memory usage when running as a PTY for overall runtime performance here.
## Validation Steps Performed
- Ran the thing manually and checked it out with wsl and cmatrix and Powershell and such attached to Terminal
- Wrote and ran automated tests on formatting method
## Summary of the Pull Request
This fixes our calculation for the initial size of the window. WE weren't accounting for the height of the tabs, so the `initialRows` was consistently wrong.
## PR Checklist
* [x] Closes#2061
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
For the tabs below the titlebar case, there's 6px (unscaled) of space that I cannot account for. I seriously have no idea where it's coming from. When we end up creating the first `TermControl` after startup, there's an inexplicable `6*scale` difference between the height of the `tabContent` and the `SwapChainPanel`'s size.
## Validation Steps Performed
Checked all six of the following cases:
* 1.0 DPI scaling, Tabs in Titlebar
* 1.25 DPI scaling, Tabs in Titlebar
* 1.0 DPI scaling, Tabs NOT in Titlebar, always show tabs
* 1.0 DPI scaling, Tabs NOT in Titlebar, DON'T always show tabs
* 1.25 DPI scaling, Tabs NOT in Titlebar, always show tabs
* 1.25 DPI scaling, Tabs NOT in Titlebar, DON'T always show tabs
If UseAcrylic is disabled, CTRL+SHIFT+SCROLL would enable it, without
having to change the setting in profile.json manually.
1. Set "useAcrylic" to false for the any profile in profile.json
2. Open terminal window for that profile.
3. CTRL+SHIFT+MouseScroll
Acrylic background opacity should change according to mouse scroll
## PR Checklist
* [x] CLA signed.
* [x] Tested manually
* [x] Updated documentation
Closes#661
There's a platform limitation that causes us to crash when we rearrange
tabs. Xaml tries to send a drag visual (to wit: a screenshot) to the
drag hosting process, but that process is running at a different IL than
us.
For now, we're disabling elevated drag.
Fixes#3581
This commit enables passthrough mode for VT Input Mode in ConPty. This
will be used to pass VT Input from Mouse Mode directly to the app on the
other side.
## References
#545 - VT Mouse Mode (Terminal)
#376 - VT Mouse Mode (ConPty)
## Detailed Description of the Pull Request / Additional comments
### ConHost
- Set the callback for the InputEngine.
- Retrieve `IsInVirtualTerminalInputMode` from the InputBuffer
### Adapter (Dispatch)
Retrieve `VTInputMode` setting from ConHost
### Parser
- Add a callback to passthrough unknown input sequences directly to the
input queue.
- If we're in VTInputMode, use the callback
## Validation Steps Performed
Tests should still pass.
I noticed a crash in debug builds when a connected application terminates;
we get its exit code, then we destruct, and the u16state is used after it's
destructed by us parsing the process's last words.
We should have been doing this all along.
## Summary of the Pull Request
Introduces convenience type `til::size` which automatically implements our best practices for size-related types and provides automatic conversions in/out of the relevant types.
## PR Checklist
* [x] In support of Differental Rendering #778
* [X] I work here.
* [x] Tests added/passed
* [x] I'm a core contributor.
## Detailed Description of the Pull Request / Additional comments
- Automatically converts in from anything with a X/Y (console `COORD`) or cx/cy (Win32 `SIZE`)
- Automatically converts out to `COORD`, `SIZE`, or `D2D1_SIZE_F`.
- Constructs from bare integers written into source file
- Default constructs to empty
- Uses Chromium Math for all basic math operations (+, -, *, /)
- Provides equality tests
- Adds initial proposal for division-to-ceiling (round up division) that attempts to `ceil` without any floating point math.
- Accessors for height/width
- Type converting accessors (that use safe conversions and throw) for height/width
- Convenience function for area calculation (as that's common with type) and uses safe math to do it.
- TAEF/WEX Output and Comparators so they will print very nicely with `VERIFY` and `Log` macros in our testing suite.
## Validation Steps Performed
- See automated tests of functionality.
## Summary of the Pull Request
- Changes the `IRenderEngine` interface to return a vector of values instead of just a single one. Engines that want to report one still can. Engines that want to report multiple smaller ones will be able to do so going forward.
## PR Checklist
* [x] In support of differential rendering #778
* [x] I work here.
* [x] Manually tested it still works.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
- Some of my ideas for the `DxEngine` require the ability to specify multiple smaller rectangles instead of one giant one, specifically to mitigate the case where someone refreshes just one cell in two opposite corners of the display (which currently coalesces into refreshing the entire display.)
- This is pulled out into an individual PR to make it easier to review that concept changing.
## Validation Steps Performed
- Ran the Terminal
With certain font faces at certain sizes, the advances seem to be
slightly more than the pixel grid; Cascadia Code at 13pt (though, 200%
scale) had an advance of 10.000001.
This commit makes it so that anything sub-1/100 of a cell won't make us
break up runs, because doing so results in suboptimal rendering.
Fixes#4806.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
I originally thought that setting `TSFInputControl::_editContext.InputPaneDisplayPolicy` to be Automatic would allow the InputPanel to show and hide automatically when `TSFInputControl` gains and loses focus. It doesn't seem to behave that way, so we'll show the InputPanel manually.
I'll show the panel during `PointerPressedHandler` and during `GotFocusHandler`. A user will have the on-screen keyboard pop up when getting focus, but if they close the keyboard, they can simply re-tap on the terminal to bring it back up.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#3639
* [x] CLA signed.
* [x] Tests added/passed
## Validation Steps Performed
Played on my surfaces book with the on screen keyboard by closing/tapping on the terminal and using the search box.
## Summary of the Pull Request
When we are maximized or fullscreened, check for the presence of the taskbar in auto-hide mode. If the Terminal finds the taskbar on any side of the monitor, adjust our window rect by just a little bit, so that the taskbar can still be revealed by the user mousing over that edge.
## References
## PR Checklist
* [x] Closes#1438
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Note to future code archeologists:
This doesn't seem to work for fullscreen on the primary display. However, testing a bunch of other apps with fullscreen modes and an auto-hiding taskbar has shown that _none_ of them reveal the taskbar from fullscreen mode. This includes Edge, Firefox, Chrome, Sublime Text, Powerpoint - none seemed to support this.
This does however work fine for maximized.
## Validation Steps Performed
I'm maximized and fullscreened the Terminal a lot in the last two days.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Right clicking on a focused tab while Copy On Select is active currently copies any active selection. This is because `PointerReleasedHandler` doesn't check for the mouse button that was released.
During a mouse button release, only the left mouse button release should be doing anything.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4740
* [x] CLA signed.
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
These are the scenarios I've tested. They're a combination of in focus/out of focus, Copy On Select on/off, left/right click pressed and their move and release variants.
From Out of Focus:
- Left Click = Focus
- Left Click Move = Focus + Selection
- Left Click Release
- CoS on = Copy
- CoS off = Nothing
- Shift Left Click = Focus
- Right Click
- Focus
- CoS on = Paste
- CoS off = Copy if Active Selection, Paste if not.
- Right Click Move = Nothing
- Right Click Release = Nothing
From In Focus
- Left Click = Selection if CoS off
- Left Click Move = Selection
- Left Click Release
- CoS on = Copy
- CoS off = Nothing
- Shift Left Click = Set Selection Anchor
- Right Click
- CoS on = Paste
- CoS off = Copy if Active Selection, Paste if not.
- Right Click Move = Nothing
- Right Click Release = Nothing
til::color will help us move away from COLORREF internally. It supports
conversion to/from COLORREF, and from all types of structs containing
members named R, G, B and A (or r, g, b, and a).
## Validation Steps Performed
Tests; run through profile/colorScheme deserialization with `til::color`
instead of `uint32_t` or `COLORREF`.
checkpointing this since it's so close. It works for everything but fullscreen on my primary, 125% display which has the taskbar on top, and autohides. Every other case works fine.
[Git2Git] Merged PR 4314209: Fix some TVS warnings in Console UIA
1. We were doing `FAILED(X || FAILED(Y))` instead of `FAILED(X) || FAILED(Y)`.
Fixes MSFT:24904151. Fixes MSFT:24904224.
2. You cannot SAL-annotate a `gsl::not_null`.
Fixes MSFT:24904221
Related work items: #24904151, #24904221, #24904224 Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp 46167d4415c888d4d6a52ea7d3e3cc57a0f5a78d
Related work items: #24904151, #24904221, #24904224
## Summary of the Pull Request
Add a `SizeChanged` handler to the titlebar content UI element. It's possible that this element's size will change after the dragbar's. When that happens, the drag bar won't send another `SizeChanged` event, because the dragbar's _size_ didn't change, only it's position.
## References
We originally duped this issue to #4166, but after #4829 fixed that issue, this one persisted. They're all related, and _look_ like dupes, but they weren't.
## PR Checklist
* [x] Closes#4288
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
I had a solid 100% repro that doesn't repro anymore.
I've maximized, restored, resized, and generally played with the window a bunch.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Emoji composition was only being shown one letter at a time. This is because of the way I expected `CoreTextTextUpdatingEventArgs.Range` to be provided to TSFInputControl during composition (for Chinese/Japanese IME). Emoji IME composition gives the `StartCaretPosition` as the same as `EndCaretPosition`, unlike how for Chinese/Japanese IME, `StartCaretPosition` is usually the start of the composition and `EndCaretPosition` is the latest character in the composition. The solution is to change the `_inputBuffer.substr()` call to simply grab all of the buffer starting from `_activeTextStart`. This way I can ensure that I grab all of the "active text", instead of trusting the given `args.Range` to tell me the active text.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4828
* [x] CLA signed.
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Chinese, Japanese, Korean, Emoji composition performed. Emoji selection through pointer also performed.
## Summary of the Pull Request
`GetTextForClipboard` already exists in the TextBuffer. It makes sense to use that for UIA as well. This changes the behavior or `GetText()` such that it does not remove leading/trailing whitespace anymore. That is more of an expected behavior.
## References
This also contributes to...
- #4509: UIA Box Selection
- #2447: UIA Signaling for Selection
- #1354: UIA support for Wide Glyphs
Now that the expansion occurs at before render-time, the selection anchors are an accurate representation of what is selected. We just need to move GetText to the TextBuffer. Then we can have those three issues just rely on code from the text buffer. This also means ConHost gets some of this stuff for free 😀
## Detailed Description of the Pull Request / Additional comments
- `TextBuffer::GetTextForClipboard()` --> `GetText()`
- `TextBuffer::GetText()` no longer requires GetForegroundColor/GetBackgroundColor. If either of these are not defined, we return a `TextAndColor` with only the `text` field populated.
- renamed a few parameters for copying text to the clipboard for clarity
- Updated `UiaTextRange::GetText()` to use `TextBuffer::GetText()`
## Validation Steps Performed
Manual tests for UIA using accessibility insights and Windows Terminal's copy action (w/ and w/out shift)
Added tests as well.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Translate automatically generated message text from German into English.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4799
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
@miniksa mentioned in https://github.com/microsoft/terminal/pull/4799#discussion_r389166916
> Actually..... we would consider that block to be wrong. It should have had the English error text there. [...] It's just our practice to have everything be in English as that's our company's working language. [...]
The translation is based on the message text found in the official docs: https://docs.microsoft.com/en-us/nuget/Consume-Packages/Package-restore-troubleshooting
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
We're deref'ing a null `_terminal`. Don't do that. This is a _okay_ fix, mostly to stem the bleeding. @DHowett-MSFT's got a mind for a real fix to #4166, but this isn't it.
## PR Checklist
* [x] related to #4166
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
Pretty straightforward. When we get a `WM_DISPLAYCHANGE`, that means the
display's DPI changed. When that happens, resize the drag bar, so that
it'll reflect the new scaling.
Unblocks #4778Closes#4166
## Validation
Man I've changed the DPI of my displays so many times in the last 30
minutes. I dragged the window across a bunch of DPI boundaries too.
AutomationProperties of interest in this PR include...
- Name: the name of a UI element (generally used as the main identifier
for it)
- HelpText: an additional description for a more complex UI element
- AccessibilityView[1]
- Raw: hide from the UIA tree. Only navigate to this if you know what
you're doing
- Control: a control without any content in it. Basically, a point at
which the user can make a decision as to how to navigate the tree or
invoke an action.
- Content: a control that also has content to present to the user.
I set a few more AutomationProperties throughout Windows Terminal...
- MinMaxClose Control: hidden (we can/should rely on the true buttons
that we are hiding)
- SplitButton: Name and Help text (currently ignored due to #4804, but
having it in the resource file won't cause any problems)
- SearchBox: added a more specific name to the close button
- BackgroundImage: hide it
## References
A few additional work items have been created for tracking...
- SplitButton: https://github.com/microsoft/terminal/issues/4804
## PR Checklist
* [X] Closes#2099
* [X] Closes#2102
## Validation Steps Performed
Verified using Accessibility Insights and Inspect.exe
[1] https://docs.microsoft.com/en-us/windows/win32/winauto/uiauto-treeoverview
## Summary of the Pull Request
Adds warning messages for a pair of keybindings-related scenarios. This covers the following two bugs:
* #4239 - If the user has supplied more than one key chord in their `"keys"` array.
* #3522 - If a keybinding has a _required_ argument, then we'll display a message to the user
- currently, the only required parameter is the `direction` parameter for both `resizePane` and `moveFocus`
## References
When we get to #1334, we'll want to remove the `TooManyKeysForChord` warning.
## PR Checklist
* [x] Closes#4239
* [x] Closes#3522
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Tested manually, added tests.
The Xaml input stack doesn't allow an application to suppress the "caret
browsing" dialog experience triggered when you press F7.
The official recommendation from the Xaml team is to catch F7 before we
hand it off.
This commit introduces a special F7 handler and an ad-hoc implementation of event bubbling.
Runtime classes implementing a custom IF7Listener interface are
considered during a modified focus parent walk to determine who can
handle F7 specifically.
If the recipient control handles F7, we suppress the message completely.
This event bubbler has some minor issues -- the search box will not be
able to receive F7 because its parent control implements the handler.
Since search is already mostly a text box, it doesn't _need_ special
caret browsing functionality as far as I can tell.
TermControl implements its OnF7Pressed handler by synthesizing a
keybindings event and an event to feed into Terminal Core directly.
It's not possible to create a synthetic KeyPressRoutedEvent; if it were,
I would have just popped one into the traditional input queue. :)
Fixes#638.
## Summary of the Pull Request
1) Improves the performance of word-recognition operations such as word
navigation in UIA and selection.
2) Fixes a bug where attempting to find the next word in UIA, when none
exists, would hang
3) TraceLogging code only runs when somebody is listening
## Detailed Description of the Pull Request / Additional comments
- The concept of a delimiter class got moved to the CharRow.
- The buffer iterator used to save a lot more information than we needed
- I missed updating a tracing function after making GetSelection return
one text range. That is fixed now.
## Validation Steps Performed
Performed Word Navigation under Narrator and NVDA.
NOTE: The release build should be used when testing to optimize
performance
Closes#4703
## Summary of the Pull Request
Korean IME was not working correctly due to way we were clearing the input buffer inside of `TSFInputControl`. We wanted to clear our input buffer and tell TSF to clear its input buffer as well when we receive a `CompositionCompleted` event. This works fine in some IME languages such as Chinese and Japanese. However, Korean IME composes characters differently in such a way where we can't tell TSF to clear their buffer during a `CompositionCompleted` event because it would clear the character that triggered the `CompositionCompleted` event in the first place.
The solution in this PR is to keep our `_inputBuffer` intact until the user presses <kbd>Enter</kbd> or <kbd>Esc</kbd>, in which case we clear our buffer and the TSF buffer. I've chosen these two keys because it seems to make sense to clear the buffer after text is sent to the terminal with <kbd>Enter</kbd>, and <kbd>Esc</kbd> usually means to cancel a current composition anyway.
This means we need to keep track of our last known "Composition Start Point", which is represented by `_activeTextStart`. Whenever we complete a composition, we'll send the portion of the input buffer between `_activeTextStart` and the end of the input buffer to the terminal. Then, we'll update `_activeTextStart` to be the end of the input buffer so that the next time we send text to the terminal, we'll only send the portion of our buffer that's "active".
## PR Checklist
* [x] Closes#4226
* [x] CLA signed
* [x] Tests added/passed
## Validation Steps Performed
Manual testing with Chinese, Japanese, and Korean IME.
* Azure: rewrite user input handler
This commit replaces the AzureConnection's input handler with one that
acts more like "getline()". Instead of the Read thread setting a state
and WriteInput filling in the right member variable, the reader blocks
on the user's input and receives it in an optional<string>.
This moves the input number parsing and error case handling closer to
the point where those inputs are used, as opposed to where they're
collected.
It also switches our input to be "line-based", which is a huge boon for
typing tenant numbers >9. This fixes#3233. A simple line editor
(supporting only backspace and CR) is included.
It also enables echo on user input, and prints it in a nice pretty green
color.
It also enables input queueing: if the user types anything before the
connection is established, it'll be sent once it is.
Fixes#3233.
* Azure: display the user's options and additional information in color
This commit colorizes parts of the AzCon's strings that include "user
options" -- things the user can type -- in yellow. This is to help with
accessibility.
The implementation here is based on a discussion with the team.
Alternative options for coloration were investigated, such as:
* Embedding escape sequences in the resource file.
This would have been confusing for translators.
The RESW file format doesn't support  escapes, so we would need
some magic post-processing.
* Embedding "markup" in the resource file (like #{93m}, ...)
This still would have been annoying for translators.
We settled on an implementation that takes resource names, colorizes
them, and string-formats them into other resources.
* Azure: follow the user's shell choice from the online portal
Fixes#2266.
* Azure: remove all credentials instead of just the first one
