This commit enables /fp:fast. This doubles the performance of the Delta E
computation in #11095 for instance. Additionally it re-enables two options for
debug builds which are normally enabled by default by Visual Studio.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* No change in binary size
* No obvious change in behavior
This implements command line matching for `CascadiaSettings::GetProfileForArgs`.
The command lines for all user profiles are resolved to absolute file paths,
argument quotes are standardized ("canonicalized") and the results are cached.
When `GetProfileForArgs` is called with a Commandline() value, we "canonicalize"
the argument as well and find the profile that is the longest prefix.
If none could be found the default profile is returned.
## PR Checklist
* [x] Closes#9458
* [x] Closes#10952
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* Open a `cmd.exe` tab in the store-version of WT
* Run `start cmd`
--> A tab with the `cmd.exe` profile opens
* Run `start pwsh.exe`
--> A tab with the PowerShell 7 profile opens
* Run PowerShell 7 from the start menu
--> A tab with the PowerShell 7 profile opens
* Create a symlink for PowerShell 7 and launch `pwsh.exe` from there
--> A tab with the PowerShell 7 profile opens
WinUI/XAML requires the `SelectedItem` to be member of the list of
`ItemsSource`. `CascadiaSettings::DefaultTerminals()` is such an `ItemsSource`
and is called every time the launch settings page is visited.
It calls `DefaultTerminal::Available()` which in turn calls `Refresh()`.
While the `SelectedItem` was cached in `CascadiaSettings`, the value of
`DefaultTerminals()` wasn't. Thus every time the page was visited, it refreshed
the `ItemsSource` list without invalidating the current `SelectedItem`.
This commit prevents such accidental mishaps from occurring in the future,
by moving the responsibility of caching solely to the `CascadiaSettings` class.
## PR Checklist
* [x] Closes#11424
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Navigating between SUI pages maintains the current dropdown selection ✔️
* Saving the settings saves the correct terminal at `HKCU:\Console\%%Startup` ✔️
## Summary of the Pull Request
Similar to `vswhere -latest`, show only the latest Visual Studio command prompts / developer PowerShell. This was tested by deleting the local package state and testing against fresh state with both VS2019 and VS2022 Preview installed, and indeed VS2022 Preview (both cmd and powershell) show. The other profiles were generated but hidden by default.
## References
Modification of PR #7774
## PR Checklist
* [x] Closes#11307
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
The sort algorithm is the same basic algorithm I used in https://github.com/microsoft/vswhere. It sorts first by installation version with a secondary sort based on the install date in case the installation versions are the same.
## Validation Steps Performed
With both VS2019 and VS2022 Preview installed, I made sure the initial state was expected, and tried different combinations of hiding and unhiding generated entries, and restarted Terminal to make sure my settings "stuck".
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Continuation of https://github.com/microsoft/terminal/pull/10972 to handle multiple windows, requires that to be merged first.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Also closes#766
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Rough changelog:
Normally saving is triggered to occur every 30s, or sooner if a window is created/closed. The existing behavior of saving on last close is maintained to bypass that throttling. The automatic saving allows for crash recovery. Additionally all window layouts will be saved upon taking the `quit` action.
For loading we will check if we are the first window, that there are any saved layouts, and if the setting is enabled, and then depending on if we were given command line args or startup actions.
- create a new window for each saved layout, or
- take the first layout for our self and then a new window for each other layout.
This also saves the layout when the quit action is taken.
Misc changes
- A -s,--saved argument was added to the command line to facilitate opening all of the windows with the right settings. This also means that while a terminal session is running you can do wt -s idx to open a copy of window idx. There isn't a stable ordering of which idx each window gets saved as (it is whatever the iteration order of _peasants is), so it is just a cute hack for now.
- All position calculation has been moved up to AppHost this does mean we need to awkwardly pass around positions in a couple of unexpected places, but no solution was perfect.
- Renamed "Open tabs from a previous session" to "Open windows from a previous session". (not reflected in video below)
- Now save runtime tab color and window names
- Only enabled for non-elevated windows
- Add some change tracking to ApplicationState
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
This introduces a new TIL class that is equivalent in functionality to a `std::bitset`, but where the positions in the bitset are enum values. It also has a few additional methods allowing for setting and testing multiple positions at the same time. The idea is that this class could be used in place of the `WI_SetFlag` and `WI_IsFlagSet` macros when working with sets of flags.
## PR Checklist
* [x] Closes#10432
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #10432
## Validation Steps Performed
I've added a few unit tests that verify the behaviour of all the new methods that aren't part of `std::bitset`. I've also tried it out as a replacement for the `GridLines` enum used in the renderer, and confirmed that it has all the functionality needed to replace that cleanly.
I've done this process enough times that I should have written a script
to do it a while ago. This one is rough, but the whole changelog process
is pretty rough.
This script takes multiple revision ranges and produces something that
looks like a rough untranslated changelog, with indicators for how many
of the provided ranges had the same change (deduplicated by title.)
I use a process like this to build the Stable and Preview release notes
out of a set of revision ranges.
This introduces a spec for keyboard selection. This enables the user to create and update a selection without the use of a mouse or stylus.
## References
Contributes to #715
This commit reduces the code surface that interacts with raw JSON data,
reducing code complexity and improving maintainability.
Files that needed to be changed drastically were additionally
cleaned up to remove any code cruft that has accrued over time.
In order to facility this the following changes were made:
* Move JSON handling from `CascadiaSettings` into `SettingsLoader`
This allows us to use STL containers for data model instances.
For instance profiles are now added to a hashmap for O(1) lookup.
* JSON parsing within `SettingsLoader` doesn't differentiate between user,
inbox and fragment JSON data, reducing code complexity and size.
It also centralizes common concerns, like profile deduplication and
ensuring that all profiles are assigned a GUID.
* Direct JSON modification, like the insertion of dynamic profiles into
settings.json were removed. This vastly reduces code complexity,
but unfortunately removes support for comments in JSON on first start.
* `ColorScheme`s cannot be layered. As such its `LayerJson` API was replaced
with `FromJson`, allowing us to remove JSON-based color scheme validation.
* `Profile`s used to test their wish to layer using `ShouldBeLayered`, which
was replaced with a GUID-based hashmap lookup on previously parsed profiles.
Further changes were made as improvements upon the previous changes:
* Compact the JSON files embedded binary, saving 28kB
* Prevent double-initialization of the color table in `ColorScheme`
* Making `til::color` getters `constexpr`, allow better optimizations
The result is a reduction of:
* 48kB binary size for the Settings.Model.dll
* 5-10% startup duration
* 26% code for the `CascadiaSettings` class
* 1% overall code in this project
Furthermore this results in the following breaking changes:
* The long deprecated "globals" settings object will not be detected and no
warning will be created during load.
* The initial creation of a new settings.json will not produce helpful comments.
Both cases are caused by the removal of manual JSON handling and the
move to representing the settings file with model objects instead
## PR Checklist
* [x] Closes#5276
* [x] Closes#7421
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Out-of-box-experience is identical to before ✔️
(Except for the settings.json file lacking comments.)
* Existing user settings load correctly ✔️
* New WSL instances are added to user settings ✔️
* New fragments are added to user settings ✔️
* All profiles are assigned GUIDs ✔️
## Summary of the Pull Request
Updates our `UiaTextRange` to no longer treat the end of the buffer as the "document end". Instead, we consider the "document end" to be the line beneath the cursor or last legible character (whichever is further down). In the event where the last legible character is on the last line of the buffer, we use the "end exclusive" position (left-most point on a line one past the end of the buffer).
When movement of any kind occurs, we clamp each endpoint to the document end. Since the document end is an actual spot in the buffer (most of the time), this should improve stability because we shouldn't be pointing out-of-bounds anymore.
The biggest benefit is that this significantly improves the performance of word navigation because screen readers no longer have to take into account the whitespace following the end of the prompt.
Word navigation tests were added to the `TestTableWriter` (see #10886). 24 of the 85 tests were failing, however, they don't seem to interact with the document end, so I've marked them as skip and will fix them in a follow-up. This PR is large enough as-is, so I'm hoping I can take time in the follow-up to clean some things on the side (aka `preventBoundary` and `allowBottomExclusive` being used interchangeably).
## References
#7000 - Epic
Closes#6986Closes#10925
## Validation Steps Performed
- [X] Tests pass
- [X] @codeofdusk has been personally testing this build (and others)
This commit adds dynamic profile generators for Visual Studio Developer
Command Prompt (VS2017+) and Visual Studio Developer PowerShell
(VS2019.2+)
Tested manually by deploying locally. My local environment has four
instances of VS installed, one VS2017 and multiple channels of VS2019.
We're wrapping the COM Visual Studio Setup Configuration API to query
for VS instances and retrieve the relevant properties. Two different
namespaces are used so the end-user can turn off one or the other. For
instance, end user may prefer to always use Developer PowerShell.
## Validation Steps Performed
1. Build locally using Visual Studio 2019
2. Deploy CascadiaPackage
3. Verify entries exist in profiles menu
4. Verify entries exist in settings.json
5. Open each profile
6. Validate start-in directory
7. Validate environment variables are as expected
8. Uninstall Windows Terminal - Dev package
9. Repeat.
Closes#3821
This PR adds support for the `DECRQSS` (Request Selection or Setting)
escape sequence, which is a standard VT query for reporting the state of
various control functions. This initial implementation only supports
queries for the `DECSTBM` margins, and the `SGR` graphic rendition
attributes.
This can be useful for certain forms of capability detection (#1040). As
one example in particular, it can serve as an alternative to the
`COLORTERM` environment variable for detecting truecolor support
(#11057).
Of the settings that can be queried by `DECRQSS`, the only other one
that we could be supporting at the moment is `DECSCUSR` (Cursor Style).
However, that would require passing the query through to the conpty
client, which is a lot more complicated, so I thought it best to leave
for a future PR.
For now this gets the basic framework in place, so we are at least
responding to queries, and even just supporting the `SGR` attributes
query is useful in itself.
Validation
----------
I've added a unit test verifying the reports for the `DECSTBM` and `SGR`
settings with a range of different parameters. I've also tested the
`DECSTBM` and `SGR` reports manually in _Vttest_, under menu 11.2.5.3.6
(Status-String Reports).
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/1032-elevation-qol/doc/specs/%235000%20-%20Process%20Model%202.0/%231032%20-%20Elevation%20Quality%20of%20Life%20Improvements.md) ⇐
## Summary of the Pull Request
Despite my best efforts to mix elevation levels in a single Terminal window, it seems that there's no way to do that safely. With the dream of mixed elevation dead, this spec outlines a number of quality-of-life improvements we can make to the Terminal today. These should make using the terminal in elevated scenarios better, since we can't have M/E.
### Abstract
> For a long time, we've been researching adding support to the Windows Terminal
> for running both unelevated and elevated (admin) tabs side-by-side, in the same
> window. However, after much research, we've determined that there isn't a safe
> way to do this without opening the Terminal up as a potential
> escalation-of-privilege vector.
>
> Instead, we'll be adding a number of features to the Terminal to improve the
> user experience of working in elevated scenarios. These improvements include:
>
> * A visible indicator that the Terminal window is elevated ([#1939])
> * Configuring the Terminal to always run elevated ([#632])
> * Configuring a specific profile to always open elevated ([#632])
> * Allowing new tabs, panes to be opened elevated directly from an unelevated
> window
> * Dynamic profile appearance that changes depending on if the Terminal is
> elevated or not. ([#1939], [#8311])
## PR Checklist
* [x] Specs: #1032, #632
* [x] References: #5000, #4472, #2227, #7240, #8135, #8311
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
### Why are these two separate documents?
I felt that the spec that is currently in review in #7240 and this doc should remain separate, yet closely related documents. #7240 is more about showing how this large set of problems discussed in #5000 can all be solved technically, and how those solutions can be used together. It establishes that none of the proposed solutions for components of #5000 will preclude the possibility of other components being solved. What it does _not_ do however is drill too deeply on the user experience that will be built on top of those architectural changes.
This doc on the other hand focuses more closely on a pair of scenarios, and establishes how those scenarios will work technically, and how they'll be exposed to the user.
During startup we do not have real dimensions, so we have to guess what
our dimensions should be based off of the splits.
We'll augment the state of the pane search to also have a size in each
dimension that gets incrementally upgraded as we recurse through the
tree.
References #10978
This PR converts the WSL distro generator to use the registry to lookup
WSL distros instead of trying to parse the results of `wsl.exe`.
`wsl.exe` sometimes takes a very long time to launch the WSL service,
which means that on the first launch of the Terminal, WSL distros can
sometimes be missing entirely!
## References
* Also related is #6160, but I feel that deserves a separate PR for
warning when the default profile is a dynamic profile who's source
indicated it was gone.
## PR Checklist
* [x] Closes#9905
* [x] Closes#7199
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is maybe a little BODGY, but hey we get tons of reports of this
root cause.
## Validation Steps Performed
Ran it locally, it did well. Ran a `wsl --shutdown`, then booted the
terminal - seemed to do well. I never was able to repro the slowness
myself, but I'd suspect this'll fix it.
* Perform the handling of partial code points in the `u8u16` and `u16u8`
conversion functions without preparation in a preliminary buffer.
* Simplify partials handling in `u8u16` (perf).
* Declare the parameters for the incoming data as referenced
string_views.
* Simplify templatization.
* Simplify exception handling.
We complete the partial codepoint in the 4-bytes long cache and convert
it separately. This makes the cache ready for capturing the next
partials before the remaining string is converted. This way, we neither
need to copy the whole string into a buffer which contains complete
codepoints, nor do we need to allocate an unnecessarily long buffer
which exists for the life time of the state class instance.
Finding and capturing of partials is performed in a more linear code
using the evaluation of the length of a code point.
The parameters for the incoming data are now explicitely declared to be
referenced string_views.
`CATCH_RETURN` is used to improve the readability of the code.
## Validation Steps Performed
* manually tested
* unit tests passed
Closes#10946
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
Introduces a new methodology to maintain tests for UI Automation. This includes...
- `UiaTests.csv`: an excel spreadsheet designed to store UIA movement tests in a compact format
- `GeneratedTests.ps1`: a PowerShell script that imports `UiaTests.csv` and outputs a C++ TEST_METHOD for `UiaTextRangeTests.
This new system can be used to easily add more UIA movement tests.
Read https://github.com/microsoft/terminal/blob/dev/cazamor/a11y-7000/testing/tools/TestTableWriter/README.md for more details.
Follow-up work items:
- #10924 **Failing Tests**: this found some failing tests. We should make them not fail.
- #10925 **Missing Tests: Word navigation**: Word navigation is missing.
- #10926 **MoveEndpoint Tests**: an additional column can be added to the CSV "EndpointTarget", which can be "start", "end", or "both". This will allow us to test `MoveEndpoint` in addition to `Move`.
A brief summary of the behavior of the tray icon:
- There will only ever be one tray icon representing all windows.
- Left-Click on a Tray Icon brings up the MRU window.
- Right-Click on a Tray Icon brings up a Context Menu:
```
Focus Terminal
----------------
Windows --> Window ID 1 - <unnamed window>
Named Window
Named Window Again
```
- Focus Terminal will bring up the MRU window.
- Clicking on any of the Window "names" in the submenu will summon the window.
## Settings Changes
Two new global settings are introduced: `alwaysShowTrayIcon` and `minimizeToTray`. Here's a chart explaining the behavior with the two settings.
| | `alwaysShowTrayIcon:true` | `alwaysShowTrayIcon:false` |
|----------------------|------------------------------------------------------------------|------------------------------------------------------------------|
| `minimizeToTray:true` | tray icon is always shown. minimize button will hide the window. | tray icon is always shown. minimize button will hide the window. |
| `minimizeToTray:false` | tray icon is always shown. | tray icon is not shown ever. |
Closes#5727
## References
[Spec for Minimize to Tray](https://github.com/microsoft/terminal/blob/main/doc/specs/%23653%20-%20Quake%20Mode/%23653%20-%20Quake%20Mode.md#minimize-to-tray)
Docs PR - MicrosoftDocs/terminal#352
#10448 - My list of TODOs
WriteUTF8FileAtomic overrides the content of the file "atomically"
by creating a temp file and then renaming it to the original path.
The problem arises when the original path is symbolic link,
as the link itself gets overridden by a file (rather than the link target).
This PR introduces a special handling of the symlinks:
if the path as a symlink we resolve the path and use:
1. target's directory to create a temp-file in
2. target itself to be replaced with the tempfile.
Symlink resolution is problematic when the target path does not exist,
as there is no good utility that resolves such link (canonical() fails).
In this corner case we skip the "atomic" approach of renaming the file
and write the link target directly.
Closes#10787
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add functionality to move a pane to another tab. If the tab index is greater than the number of current tabs a new tab will be created with the pane as its root. Similarly, if the last pane on a tab is moved to another tab, the original tab will be closed.
This is largely complete, but I know that I'm messing around with things that I am unfamiliar with, and would like to avoid footguns where possible.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4587
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7075
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Things done:
- Moving a pane to a new tab appears to work. Moving a pane to an existing tab mostly works. Moving a pane back to its original tab appears to work.
- Set up {Attach,Detach}Pane methods to add or remove a pane from a pane. Detach is slightly different than Close in that we want to persist the tree structure and terminal controls.
- Add `Detached` event on a pane that can be subscribed to to remove other event handlers if desired.
- Added simple WalkTree abstraction for one-off recursion use cases that calls a provided function on each pane in order (and optionally terminates early).
- Fixed an in-prod bug with closing panes. Specifically, if you have a tree (1; 2 3) and close the 1 pane, then 3 will lose its borders because of these lines clearing the border on both children https://github.com/microsoft/terminal/blob/main/src/cascadia/TerminalApp/Pane.cpp#L1197-L1201 .
To do:
- Right now I have `TerminalTab` as a friend class of `Pane` so I can access some extra properties in my `WalkTree` callbacks, but there is probably a better choice for the abstraction boundary.
Next Steps:
- In a future PR Drag & Drop handlers could be added that utilize the Attach/Detach infrastructure to provide a better UI.
- Similarly once this is working, it should be possible to convert an entire tab into a pane on an existing tab (Tab::DetachRoot on original tab followed by Tab::AttachPane on the target tab).
- Its been 10 years, I just really want to use concepts already.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing by creating pane(s), and moving them between tabs and creating new tabs and destroying tabs by moving the last remaining pane.
The quake mode keybinding is bound to a scancode. This made it
impossible to override it with a vkey-based one like "win+\`".
This commit fixes the issue by making sure that a `KeyChord` always has a vkey,
and leveraging this fact inside ActionMap, which now ignores the scan-code.
## PR Checklist
* [x] Closes#10875
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* quake mode and other keybinding still work ✔️
* Repro settings from #10875 work correctly ✔️
My first approach to solve #10875 failed.
This PR contains the most useful change as a separate commit.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* quake mode keybinding works ✔️
* command palette still works ✔️
This PR adds conhost support for downloadable soft fonts - also known as
dynamically redefinable character sets (DRCS) - using the `DECDLD`
escape sequence.
These fonts are typically designed to work on a specific terminal model,
and each model tends to have a different character cell size. So in
order to support as many models as possible, the code attempts to detect
the original target size of the font, and then scale the glyphs to fit
our current cell size.
Once a font has been downloaded to the terminal, it can be designated in
the same way you would a standard character set, using an `SCS` escape
sequence. The identification string for the set is defined by the
`DECDLD` sequence. Internally we map the characters in this set to code
points `U+EF20` to `U+EF7F` in the Unicode private use are (PUA).
Then in the renderer, any characters in that range are split off into
separate runs, which get painted with a special font. The font itself is
dynamically generated as an in-memory resource, constructed from the
downloaded character bitmaps which have been scaled to the appropriate
size.
If no soft fonts are in use, then no mapping of the PUA code points will
take place, so this shouldn't interfere with anyone using those code
points for something else, as along as they aren't also trying to use
soft fonts. I also tried to pick a PUA range that hadn't already been
snatched up by Nerd Fonts, but if we do receive reports of a conflict,
it's easy enough to change.
## Validation Steps Performed
I added an adapter test that runs through a bunch of parameter
variations for the `DECDLD` sequence, to make sure we're correctly
detecting the font sizes for most of the known DEC terminal models.
I've also tested manually on a wide range of existing fonts, of varying
dimensions, and from multiple sources, and made sure they all worked
reasonably well.
Closes#9164
I was watching a video about vectorized instructions and I wanted to
try out some new things, as I had never written AVX code before.
This commit is the result of this tiny Thursday morning detour into
AVX land. It improves performance of `TextColor::GetColor` by about 3x.
## Validation Steps Performed
* Default colors are still properly shifted +8 ✔️
For inexplicable reasons, the top row of pixels on our tabs, new tab
button, and caption buttons is totally unclickable. The mouse simply
refuses to interact with them. So when we're maximized, on certain
monitor configurations, this results in the top row of pixels not
reacting to clicks at all.
To obey Fitt's Law, we're gonna hackily shift the entire island up one
pixel. That will result in the top row of pixels in the window actually
being the _second_ row of pixels for those buttons, which will make them
clickable. It's perhaps not the right fix, but it works.
After discussion, we think this is a fine fix for this. We don't think
anyone's going to miss the top row of pixels on the TabView. The original
bug is painful enough for the subset of users it impacts that this is an
acceptable trade. Should a better fix be found, we can absolutely do that
instead.
Closes#7422
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
The `+=` operator is an extremely hot path under heavily output load. This PR aims to optimize its speed.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Supports #10563
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Adds support for users to be able to set font features and axes (see the spec for more details!)
## Detailed Description
**CustomTextLayout**
- Asks the `DxFontRenderData` for the font features when getting glyphs
- _If any features have been set/updated, we always skip the "isTextSimple" shortcut_
- Asks the `_formatInUse` for any font axes when mapping characters in `_AnalyzeFontFallback`
**DxFontRenderData**
- Stores a map of font features (initialized to the [standard feature list])
- Stores a map of font axes
- Has methods to add font features/axes to the map or update existing ones
- Has methods to retrieve the font features/axes
- Sets the font axes in the `IDWriteTextFormat` when creating it
## Validation Steps Performed
It works!
[standard feature list]: ac5aef67d1/DrawableObject.ixx (L802)
Specified in #10457
Related to #1790Closes#759Closes#5828
This commit introduces an alternative to specifying key bindings as a combination of key modifiers and a character. It allows you to specify an explicit virtual key as `vk(nnn)`.
Additionally this commit makes it possible to bind actions to scan codes. As scan code 41 appears to be the button below the Escape key on virtually all keyboards, we'll be able to bind the quake mode hotkey to `win+sc(41)` and have it work consistently across most if not all keyboard layouts.
## PR Checklist
* [x] Closes#7539, Closes#10203
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
The following was tested both on US and DE keyboard layouts:
* Ctrl+, opens settings ✔️
* Win+` opens quake mode window ✔️
* Ctrl+plus/minus increase/decrease font size ✔️
This commit is a preparation for upcoming changes to
KeyChordSerialization for #7539 and #10203. It introduces several
string helpers to simplify key chord parsing and get rid of our implicit
dependency on locale sensitive functions, which are known to behave
erratically.
Additionally key chord serialization used to depend on iteration order
of a hashmap which caused different strings to be returned for the same
key chord. This commit fixes the iteration order and will always return
the same string.
## Validation Steps Performed
* Key bindings are correctly parsed ✔️
* Key bindings are correctly serialized ❔
Updates check-spelling to 0.0.19
https://github.com/check-spelling/check-spelling/security/advisories/GHSA-g86g-chm8-7r2p
I'm pinning `actions/checkout` to @v2 instead of micromanaging the
version. We have reasonable faith that GitHub will do a good job of
maintaining their version branch.
I'll probably introduce a version branch for check-spelling in the near
future as well. The job name change is for future bits -- I originally
copied the name from a template and didn't understand its significance
-- eventually it'll actually be used by the workflow. And if one uses
`act`, having distinct / well named jobs is actually useful.
This PR is a small start in a broader "Minimize to Tray" feature (#5727).
This particular change is scoped only to the scenario when a quake window
is minimized. Currently the only way to bring back the quake window
when it's minimized is to press the global hotkey again. This gives another
option - to press the terminal icon in the tray.
Eventually though, minimize to tray will be available for any window, and
I'd like more time to flesh out the general porpoise scenarios and context
menus. Having just a bit in this PR also helps reviewers by keeping it small!
This commit introduces a basic ApplicationState class, without being used for anything yet to aid reviewers. At a later point actual usages of this new class may be added separately.
## References
This commit is an initial step towards implementing #8324.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Creating a `state.json` with `{"generatedProfiles":["{53e75ed9-2b63-4118-856d-0510c4f6b97e}"]}` updates the ApplicationState, as observed through a debugger ✔️
* Deleting the "generatedProfiles" field sets the corresponding field back to nullopt ✔️
This commit introduce three new `til` features:
* "til/latch.h": A std::latch clone, until we're on C++20.
* "til/mutex.h": A safe mutex wrapper, which only allows you access to the protected data after locking it. No more forgetting to lock mutexes!
* "til/throttled_func.h": Function invocation throttling used to be available as the `ThrottledFunc` class already. But this class is vastly more efficient and doesn't rely on any WinRT types.
This PR also adds a `til::ends_with` string helper which is `til::starts_with` counterpart.
## Validation Steps Performed
* Scrollbar throttling still works as it used to ✔️
* No performance regressions when printing big.txt ✔️Closes#10393
Persist inbox conhost; delegate control activities to it via a pipe
## PR Checklist
* [x] Closes#10194 - WSL Debug Tap doesn't work
* [x] Closes#10134 - WSL Parameter is Incorrect
* [x] Closes#10413 - Ctrl+C not passed to client
* [x] Closes#10414 - Leftover processes on abrupt termination
* [x] Might help #10251 - Win+X Powershell sometimes fails to attach
* [x] I work here
* [x] Manually tested with assorted launch scenarios
## Detailed Description of the Pull Request / Additional comments
It turns out that there's a bit of ownership that goes on with the original inbox `conhost.exe` and the operating system/driver. The PID of that original `conhost.exe` is stowed when the initial connection is established and it is verified for several activities. This means that the plan of letting it go completely away and having the `OpenConsole.exe` take over all of its activities must be slightly revised.
I have tested the following two alternatives to keeping `conhost.exe` around and they do not work:
1. Replacing the original owner `conhost.exe` with `OpenConsole.exe` - A.) The driver does not allow this. Once the owner is registered, it cannot be replaced. B.) There's no way of updating this information inside the client process space and it is kept there too in the `kernelbase`/`conclnt` data from its initial connection.
2. Attempting to pick up the first packet (to determine headed/headless and other initial connection information that we use to determine whether handoff is appropriate or not) prior to registering any owner at all. - The driver doesn't allow this either. The owner must be registered prior to a packet coming through.
Put this mental model in your head:
CMD --> Conhost (inbox) --> OpenConsole (WT Package) --> Terminal (WT Package)
So since the `conhost.exe` needs to stick around, here's what I'm doing in this PR:
- `conhost.exe` in the OS will receive back the `OpenConsole.exe` process handle on a successful handoff and is expected to remain alive until the `OpenConsole.exe` exits. It's now waiting on that before it terminates itself.
- `conhost.exe` in the OS will establish a signal channel pipe and listen for control commands from `OpenConsole.exe` in a very similar fashion to how the `ConPTY` signal pipe operates between the Terminal and the PTY (provided by `OpenConsole.exe` in this particular example.) When `OpenConsole.exe` needs to do something that would be verified by the OS and rejected... it will instead signal the original `conhost.exe` to do that thing and it will go through.
- `conhost.exe` will give its own handle through to `OpenConsole.exe` so it can monitor its lifetime and cleanup. If the owner is gone, the session should end.
- Assorted handle cleanup that was leading to improper exits. I was confused between `.reset()` and `.release()` for some of the `wil::unique_any<T>` handling and it lead to leaked handles. The leaked handles meant that threads weren't aware of the other sides collapsing and wouldn't cleanup/terminate appropriately.
How does this fix things?
- For the WSL cases... WSL was specifically looking up the owner PID of the console session from the driver. That was the `conhost.exe` PID. If it exits, that PID isn't valid and is recycled. Thus the parameter is incorrect or other inappropriate WSL setup behaviors.
- Ctrl+C not passed... this is a signal the operating system rejects from a PID that is not the owner. This is now relayed through the original owner and it works.
- Leftover processes... I believe I explained this was both not-enough-monitoring of each others' process lifetimes coupled with mishandling of release/resetting handles and leaking them.
- Powershell sometimes fails to attach... my theory on this one is that it's a race that became upset when the `conhost.exe` disappeared while something about Powershell/.NET was still starting, much like the WSL one. I believe now that it is sticking around, it will be fine.
Also, this WILL require an OS update to complete improvement of functionality and I have revised the interface ID. This is considered an acceptable breaking change with no mitigation because we said this feature was an alpha preview.
## Validation Steps Performed
- Launched WSL with defapp set, it works
- Launched WSL with defapp set and the debug tap on, it works and opens in two tabs
- Launched CMD, ran ping, did Ctrl+C, it now receives it
- Launched Win+X powershell a ton of times. It seems fine now
- Launched cmd, powershell, wsl, etc. Killed assorted processes in the chain (client/conhost/openconsole/windowsterminal) and observed in Process Explorer (with a long delta timer so I could see it) that they all successfully tear down now without leftovers.
## Summary of the Pull Request
This commit introduces a copy constructor/operator for
`_CONSOLE_API_MSG`. The change is not trivial as the struct contains a
union of unnamed structs that cannot be copied using regular language
features. As such a copy operator using `memcpy` was implemented.
Additionally all access specifiers were removed, as those allow a C++
compiler to reorder struct members. This would break message passing.
This commit is a good opportunity to prevent such miscompilations
proactively.
## Validation Steps Performed
* Command prompts of WSL2 fish-shell and pwsh still work ✔️Closes#10076
This pull request converts four of our existing `#ifdef` (or `#ifndef`)
`INSIDE_WINDOWS` blocks to til::features:
* Attempting to establish a handoff session (inside Windows only)
* The ability to *receive* a handoff session (outside Windows only)
* The DX engine (outside Windows only) and shaders (also outside only)
* Whether we use numpad event synthesis for clipboard/conpty (inside
Windows only)
Most of these are using the preprocessor verison of til::feature, only
because it is more difficult to gate the inclusion of headers on
constant expressions. I'd love to prefer the compile time version.
## Summary of the Pull Request
This PR adds a global "language" setting, which may be set to any supported BCP 47 tag.
Additionally a ComboBox is added to the settings UI under "Appearance", listing all languages with their localized names.
This PR introduces one new issue: If you change the language while the app is running, the UI will be in a torn state, as not all UI elements refresh automatically if the `PrimaryLanguageOverride` is changed.
## PR Checklist
* [x] Closes#5497
* [x] I work here
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated
## Validation Steps Performed
* UI language changes when changing the "language" in settings.json before starting WT / while WT is running. ✔️
* "language" field is removed from settings.json if "Use system default" is selected. ✔️
* "language" field is added or updated in settings.json if any other language is selected. ✔️
* Removes qps- languages if debugFeatures is false. ✔️
* Correctly refreshes all UI elements with the new language. ❌
This pull request implements a "feature flagging" system that will let
us turn Terminal and conhost features on/off by branch, "release" status
or branding (Dev, Preview, etc.).
It's loosely modelled after the Windows OS concept of "Velocity," but
only insofar as it is driven by an XML document and there's a tool that
emits a header file for you to include.
It only supports toggling features at compile time, and the feature flag
evaluators are intended to be fully constant expressions.
Features are added to `src\features.xml` and marked with a "stage". For
now, the only stages available are `AlwaysDisabled` and `AlwaysEnabled`.
Features can be toggled to different states using branch and branding
tokens, as documented in the included feature flag docs.
For a given feature Feature_XYZ, we will emit two fixtures visible to
the compiler:
1. A preprocessor define `TIL_FEATURE_XYZ_ENABLED` (usable from MIDL,
C++ and C)
2. A feature class type `Feature_XYZ` with a static constexpr member
`IsEnabled()` (usable from C++, designed for `if constexpr()`).
Like Velocity, we rely on the compiler to eliminate dead code caused by
things that compile down to `if constexpr (false)`. :)
Michael suggested that we could use `WindowsInbox` as a branding to
determine when we were being built inside Windows to supplant our use of
the `__INSIDE_WINDOWS` preprocessor token. It was brilliant.
Design Decisions
----------------
* Emitting the header as part of an MSBuild project
* WHY: This allows the MSBuild engine to ensure that the build is
only run once, even in a parallel build situation.
* Only having one feature flag document for the entire project
* WHY: Ease.
* Forcibly including `TilFeatureStaging` with `/FI` for all CL compiler
invocations.
* WHY: If this is a project-wide feature system, we should make it as
easy as possible to use.
* Emitting preprocessor definitions instead of constexpr/consteval
* WHY: Removing entire functions/includes is impossible with `if
constexpr`.
* WHY: MIDL cannot use a `static constexpr bool`, but it can rely on
the C preprocessor to remove text.
* Using MSBuild to emit the text instead of PowerShell
* WHY: This allows us to leverage MSBuild's `WriteOnlyWhenDifferent`
task parameter to avoid changing the file's modification time when
it would have resulted in the same contents. This lets us use the
same FeatureStaging header across multiple builds and multiple
branches and brandings _assuming that they do not result in a
feature flag change_.
* The risk in using a force-include is always that it, for some
reason, determines that the entire project is out of date. We've
gone to great lengths to make sure that it only does so if the
features _actually materially changed_.
## Summary of the Pull Request
VS16.10 and later contain two regressions:
* Marking the use of `pshpack*.h` in system headers with C4103
* The newly included, builtin `AssemblyReference.xaml` is missing the `AssemblyReferences` project capability
## PR Checklist
* [x] I work here
## Validation Steps Performed
Built the project with VS16.10 and VS17.0.
[Defapp] Use real HPCON for PTY management; Have Monarch always listen for connections
## PR Checklist
* [x] Closes#9464
* [x] Related to #9475 - incomplete fix
* [x] I work here.
* [x] Manual test
## Detailed Description of the Pull Request / Additional comments
- Sometimes peasants can't manage to accept a connection appropriately because I wrote defterm before @zadjii-msft's monarch/peasant architecture. The simple solution here is to just make the monarch always be listening for inbound connections. Then COM won't start a peasant with -Embedding just to ask the monarch where it should go. It'll just join the active window. I didn't close 9475 because it should follow monarch policies on which window to join... and it doesn't yet.
- A lot of interesting things are happening because this didn't have a real HPCON. So I passed through the remaining handles (and re-GUID-ed the interface) that made it possible for me to pack the right process handles and such into an HPCON on the inbound connection and monitor that like any other ConptyConnection. This should resolve some of the process exit behaviors and signal channel things like resizing.
## Summary of the Pull Request
This PR builds on the `ActionMap` PR (#6900) by leveraging `ActionMap` to serialize actions. From the top down, the process is now as follows:
- `CascadiaSettings`: remove the hack of copying whatever we had for actions before.
- `GlobalAppSettings`: serialize the `ActionMap` to `"actions": []`
- `ActionMap`: iterate over the internal `_ActionMap` (list of actions) and serialize each `Command`
- `Command`: **THIS IS WHERE THE MAGIC HAPPENS!** For _each_ key mapping, serialize an action. Only the first one needs to include the name and icon.
- `ActionAndArgs`: Find the relevant `IActionArgs` parser and serialize the `ActionAndArgs`.
- `ActionArgs`: **ANNOYING CHANGE** Serialize any args that are set. We _need_ each setting to be saved as a `std::optional`. As with inheritance, this allows us to distinguish an explicit setting to the default value (sometimes `null`) vs an implicit "give me the default value". This allows us to serialize only the relevant details of each action, rather than writing _all_ of the args.
## References
- #8100: Inheritance/Layering for lists
- This tracks layering and better serialization for color schemes _and_ actions. This PR resolves half of that issue. The next step is to apply the concepts used in this PR (and #9621) to solve the similar problem for color schemes.
- #6900: Actions page
## Validation Steps Performed
Tests added!
## Summary of the Pull Request
Introduces `til::rle`, a vector-like container which stores elements of
type T in a run length encoded format. This allows efficient compaction
of repeated elements within the vector.
## References
* #8000 - Supports buffer rewrite work. A re-use of `til::rle` will be
useful as a column counter as we pursue NxM storage and presentation.
* #3075 - The new iterators allow skipping forward by multiple units,
which wasn't possible under `TextBuffer-/OutputCellIterator`.
Additionally it also allows a bulk insertions.
* #8787 and #410 - High probability this should be `pmr`-ified
like `bitmap` for things like `chafa` and `cacafire`
which are changing the run length frequently.
## PR Checklist
* [x] Closes#8741
* [x] I work here.
* [x] Tests added.
* [x] Tests passed.
## Validation Steps Performed
* [x] Ran `cacafire` in `OpenConsole.exe` and it looked beautiful
* [x] Ran new suite of `RunLengthEncodingTests.cpp`
Co-authored-by: Michael Niksa <miniksa@microsoft.com>
## Summary of the Pull Request
Upgrade the Windows SDK to 19041 by setting `WindowsTargetPlatformMinVersion` to 17763 and `WindowsTargetPlatformVersion` to 19041.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
General usage of the Windows Terminal application appears fine.
## Summary of the Pull Request
Adds the `dropdownDuration` property to `globalSummon`. This controls how fast the window appears on the screen when summoned from minimized. It similarly controls the speed for sliding out of view when the window is dismissed with `"toggleVisibility": true`.
`dropdownDuration` specifies the duration in **milliseconds**. This defaults to `0` for `globalSummon`, and defaults to `200` for `quakeMode`. 200 was picked because, according to [`AnimateWindow`](https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-animatewindow):
> Typically, an animation takes 200 milliseconds to play.
Do note that you won't be able to interact with the window during the animation! Input sent during the dropdown will arrive at the end of the animation, but input sent during the slide-up _won't_. Avoid setting this to large values!
The gifs are in Teams.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-59030824
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I had the following previously in the doc comments, but it feels better in the PR body:
- This was chosen because it was easier to implement and generally nicer than:
* `AnimateWindow`, which would show the window borders for the duration of
the animation, and occasionally just plain not work. Additionally, for
`AnimateWindow` to work, the window much not be visible, so we'd need to
first restore the window, then hide it, then animate it. That would flash
the taskbar.
* `SetWindowRgn` on the root HWND, which caused the xaml content to shift to
the left, and caused a black bar to be drawn on the right of the window.
Presumably, `SetWindowRgn` and `DwmExtendFrameIntoClientArea` did not play
well with each other.
* `SetWindowPos(..., SWP_NOSENDCHANGING)`, which worked the absolute best for
longer animations, and is the closest to the actual implementation of
`AnimateWindow`. This would resize the ROOT window, without sending resizes
to the XAML island, allowing the content to _not_ reflow. but for a
duration of 200ms, would only ever display ~2 frames. That's basically
not even animation anymore, it's now just an "appear". Since that's how
long the default animation is, if felt silly to have it basically not
work by default.
- If a future reader would like to implement this better, **they should feel
free to**, and not mistake my notes here as expertise. These are research
notes into the dark and terrible land that is Win32 programming. I'm no expert.
## Validation Steps Performed
This is the blob of json I'm testing with these days:
```jsonc
{ "keys": "ctrl+`", "command": { "action": "quakeMode" } },
{ "keys": "ctrl+1", "command": { "action": "globalSummon" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "desktop": "toCurrent" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "toggleVisibility": false } },
{ "keys": "ctrl+2", "command": { "action": "globalSummon", "dropdownDuration": 2000 } },
{ "keys": "ctrl+3", "command": { "action": "globalSummon", "desktop": "onCurrent" } },
{ "keys": "ctrl+4", "command": { "action": "globalSummon", "desktop": "any" } },
```
* <kbd>ctrl+\`</kbd> will summon the quake window with a _quick_ animation
* <kbd>ctrl+2</kbd> will summon the window with a s l o w animation
