This commit removes our local copy of clang-format 8 and replaces it
with a newly-built nuget package containing clang-format 10.
This resolves the inconsistency between our version of clang-format and
the one shipped in Visual Studio.
A couple minor format changes were either required or erroneously forced
upon us--chief among them is a redistribution of `*`s around SAL
annotations in inline class members of COM classes. Don't ask why; I
couldn't figure it out.
We had some aspirational goals for our formatting, which were left in
but commented out. Enabling them changes our format a little more than
I'm comfortable with, so I uncommented them and locked them to the
format style we've been using for the past year. We may not love it, but
our aspirations may not matter here any longer. Consistent formatting is
better than perfect formatting.
Adds the ability to set the selection background opacity when setting the
selection background. This also exposes the selection background and alpha
through the terminal WPF container.
New warnings were added in VS 16.7 and `std::map::erase` is now `noexcept`.
Update our code to be compatible with the new enforcement.
## PR Checklist
* [x] Closes broken audit in main after Agents updated over the weekend.
* [x] I work here.
* [x] Audit mode passes now
* [x] Am core contributor.
## Validation Steps Performed
* [x] Ran audit mode locally
MouseInput was directly asking user32 about the state of the mouse buttons,
which was somewhat of a layering violation. This commit makes all callers
have to pass the mouse state in themselves.
Closes#4869
I found this while crawling through conhost's WindowIo. Mouse wheel
events come in in screen coordinates, unlike literally every other mouse
event.
The WPF control was doing it wrong.
This pull request fixes capture and event generation in VT mouse mode
for both conhost and terminal.
Fixes#6401.
[1/3] Terminal: clamp mouse events to the viewport, don't throw them away
gnome-terminal (at least) sends mouse events whose x/y are at the
extreme ends of the buffer when a drag starts inside the terminal and
then exits it.
We would previously discard any mouse events that exited the borders of
the viewport. Now we will keep emitting events where X/Y=0/w/h.
[2/3] conhost: clamp VT mouse to viewport, capture pointer
This is the same as (1), but for conhost. conhost wasn't already
capturing the pointer when VT mouse mode was in use. By capturing, we
ensure that events that happen outside the screen still result in events
sent to an application (like a release after a drag)
[3/3] wpf: capture the pointer when VT mouse is enabled
This is the same as (2), but for the WPF control. Clamping is handled
in TerminalCore in (1), so we didn't need to do it in WPF.
When we added support for win32 input mode, we neglected to pass
`ENHANCED_KEY` through the two surfaces that would generate events. This
broke arrow keys in much the same way was #2397, but in a different
layer.
While I was working on the WPF control, I took a moment to refactor the
message cracking out into a helper. It's a lot easier on the eyes than
four lines of bit shifting repeated three times.
Fixes#7074
* send alt/F10 through the control
We were not listening for WM_SYSKEY{UP,DOWN}
* extract the actual scancode during WM_CHAR, not the bitfield
We were accidentally sending some of the additional keypress data in with
the character event in Win32 Input Mode
* set default fg/bg to campbell
The WPF control starts up in PowerShell blue even though it's not typically used
in PowerShell blue.
* don't rely on the font to determine wideness
This is a cross-port of #2928 to the WPF control
* deterministic shutdown
In testing, I saw a handful of crashes on teardown because we were not shutting
down the render thread properly.
* don't pass 10 for the font weight ...
When Cascadia Code is set, it just looks silly.
* trigger render when selection is cleared, do it under lock
Fixes#6966.
This is a refactoring of the renderer color calculations to simplify the
implementation, and to make it easier to support additional
color-altering rendition attributes in the future (e.g. _faint_ and
_conceal_).
## References
* This is a followup to PRs #3817 and #6809, which introduced additional
complexity in the color calculations, and which suggested the need for
refactoring.
## Detailed Description of the Pull Request / Additional comments
When we added support for `DECSCNM`, that required the foreground and
background color lookup methods to be able to return the opposite of
what was requested when the reversed mode was set. That made those
methods unnecessarily complicated, and I thought we could simplify them
considerably just by combining the calculations into a single method
that derived both colors at the same time.
And since both conhost and Windows Terminal needed to perform the same
calculations, it also made sense to move that functionality into the
`TextAttribute` class, where it could easily be shared.
In general this way of doing things is a bit more efficient. However, it
does result in some unnecessary work when only one of the colors is
required, as is the case for the gridline painter. So to make that less
of an issue, I've reordered the gridline code a bit so it at least
avoids looking up the colors when no gridlines are needed.
## Validation Steps Performed
Because of the API changes, quite a lot of the unit tests had to be
updated. For example instead of verifying colors with two separate calls
to `LookupForegroundColor` and `LookupBackgroundColor`, that's now
achieved with a single `LookupAttributeColors` call, comparing against a
pair of values. The specifics of the tests haven't changed though, and
they're all still working as expected.
I've also manually confirmed that the various color sequences and
rendition attributes are rendering correctly with the new refactoring.
This commit introduces a new project that lets you F5 a working instance
of the Wpf Terminal Control.
To make the experience as seamless as possible, I've introduced another
solution platform called "DotNet_x64Test". It is set to build the WPF
projects for "Any CPU" and every project that PublicTerminalCore
requires (including itself) for "x64". This is the only way to ensure
that when you press F5, all of the native and managed dependencies get
updated.
It's all quite cool when it works.
Adds support for `win32-input-mode` to conhost, conpty, and the Windows
Terminal.
* The shared `terminalInput` class supports sending these sequences when
a VT client application requests this mode.
* ConPTY supports synthesizing `INPUT_RECORD`s from the input sent to it
from a terminal
* ConPTY requests this mode immediately on startup (if started with a
new flag, `PSEUDOCONSOLE_WIN32_INPUT_MODE`)
* The Terminal now supports sending this input as well, when conpty asks
for it.
Also adds a new ConPTY flag `PSEUDOCONSOLE_WIN32_INPUT_MODE` which
requests this functionality from conpty, and the Terminal requests this
by default.
Also adds `experimental.input.forceVT` as a global setting to let a user
opt-out of this behavior, if they don't want it / this ends up breaking
horribly.
## Validation Steps Performed
* played with this mode in vtpipeterm
* played with this mode in Terminal
* checked a bunch of scenarios, as outlined in a [comment] on #4999
[comment]: https://github.com/microsoft/terminal/issues/4999#issuecomment-628718631
References #4999: The megathread
References #5887: The spec
Closes#879Closes#2865Closes#530Closes#3079Closes#1119Closes#1694Closes#3608Closes#4334Closes#4446
## Summary of the Pull Request
When resizing the window title, a GDI object would be leaked. This has to do with our island message handler using `wil` to track these objects and `wil` having a bug.
## References
microsoft/wil#100
## PR Checklist
* [x] Closes#5949
* [x] I work here.
* [x] Tested manually
* [x] Doc not required.
* [x] Am core contributor.
## Validation Steps Performed
* [x] Added the GDI Objects column to Task Manager, set the Terminal to use the `titleWidth` size tabs, then changed the title a bunch with PowerShell. Confirmed repro before (increasing GDI count). Confirmed it's gone after (no change to object count).
Web apps apparently will paste the <title> as plaintext before the
actual HTML content from the clipboard. Since this seems to be
widespread behavior across web apps, this isn't just a bug in _some
app_, this is a bug on us. We shouldn't emit the title.
This PR removes the title tag from the generated HTML.
Closes#5347
## Summary of the Pull Request
- Adjusts scaling practices in `DxEngine` (and related scaling practices in `TerminalControl`) for pixel-perfect row baselines and spacing at High DPI such that differential row-by-row rendering can be applied at High DPI.
## References
- #5185
## PR Checklist
* [x] Closes#5320, closes#3515, closes#1064
* [x] I work here.
* [x] Manually tested.
* [x] No doc.
* [x] Am core contributor. Also discussed with some of them already via Teams.
## Detailed Description of the Pull Request / Additional comments
**WAS:**
- We were using implicit DPI scaling on the `ID2D1RenderTarget` and running all of our processing in DIPs (Device-Independent Pixels). That's all well and good for getting things bootstrapped quickly, but it leaves the actual scaling of the draw commands up to the discretion of the rendering target.
- When we don't get to explicitly choose exactly how many pixels tall/wide and our X/Y placement perfectly, the nature of floating point multiplication and division required to do the presentation can cause us to drift off slightly out of our control depending on what the final display resolution actually is.
- Differential drawing cannot work unless we can know the exact integer pixels that need to be copied/moved/preserved/replaced between frames to give to the `IDXGISwapChain1::Present1` method. If things spill into fractional pixels or the sizes of rows/columns vary as they are rounded up and down implicitly, then we cannot do the differential rendering.
**NOW:**
- When deciding on a font, the `DxEngine` will take the scale factor into account and adjust the proposed height of the requested font. Then the remainder of the existing code that adjusts the baseline and integer-ifies each character cell will run naturally from there. That code already works correctly to align the height at normal DPI and scale out the font heights and advances to take an exact integer of pixels.
- `TermControl` has to use the scale now, in some places, and stop scaling in other places. This has to do with how the target's nature used to be implicit and is now explicit. For instance, determining where the cursor click hits must be scaled now. And determining the pixel size of the display canvas must no longer be scaled.
- `DxEngine` will no longer attempt to scale the invalid regions per my attempts in #5185 because the cell size is scaled. So it should work the same as at 96 DPI.
- The block is removed from the `DxEngine` that was causing a full invalidate on every frame at High DPI.
- A TODO was removed from `TermControl` that was invalidating everything when the DPI changed because the underlying renderer will already do that.
## Validation Steps Performed
* [x] Check at 150% DPI. Print text, scroll text down and up, do selection.
* [x] Check at 100% DPI. Print text, scroll text down and up, do selection.
* [x] Span two different DPI monitors and drag between them.
* [x] Giant pile of tests in https://github.com/microsoft/terminal/pull/5345#issuecomment-614127648
Co-authored-by: Dustin Howett <duhowett@microsoft.com>
Co-authored-by: Mike Griese <migrie@microsoft.com>
Selection would act up when you were using shift to ignore VT mouse
mode: we would get hundreds of WM_KEYDOWN for VK_SHIFT and dismiss the
selection every time.
I took the opportunity to move the actual responsibility for key event
dispatch into HwndTerminal. In the future, I'd like to make more of the
TerminalXxx calls just call impl methods on HwndTerminal.
## Summary of the Pull Request
This pull request ports the VT mouse code from TermControl to WpfTerminalControl. Our WPF control is a lot closer to Win32 than to Xaml, so our mouse event handler looks _nothing_ like the one that we got from Xaml. We can pass events through almost directly, because the window message handling in the mouse input code actually came from _conhost_. It's awesome.
Neither TermControl nor conhost pass hover events through when the control isn't focused, so I wired up focus events to make sure we acted the same.
Just like Terminal and conhost, mouse events are suppressed when <kbd>Shift</kbd> is held.
## Validation Steps Performed
Tested with MC, and tested by manually engaging SGR events in an Echo terminal.
## Summary of the Pull Request
This pull request ports #5096 to WpfTerminalControl, bringing it in line with the selection mechanics in Terminal. It also introduces double- and triple-click selection and makes sure we clear the selection when we resize.
Please read #5096 for more details.
## Detailed Description of the Pull Request / Additional comments
This code is, largely, copy-and-pasted from TermControl with some updates to use `std::chrono` and `til::point`. I love `til::point`. A lot.
## Validation Steps Performed
Lots of manual selection.
My basic idea was that `WM_CHAR` is just the better `WM_KEYDOWN`.
The latter fails to properly support common dead key sequences like in
#3516.
As such I added some logic to `Terminal::SendKeyEvent` to make it return
false if the pressed key represents a printable character.
This causes us to receive a character event with a (hopefully) correctly
composed code unit, which then gets sent to `Terminal::SendCharEvent`.
`Terminal::SendCharEvent` in turn had to be modified to support
potentially pressed modifier keys, since `Terminal::SendKeyEvent` isn't
doing that for us anymore.
Lastly `TerminalInput` had to be modified heavily to support character
events with modifier key states. In order to do so I merged its
`HandleKey` and `HandleChar` methods into a single one, that now handles
both cases.
Since key events will now contain character data and character events
key codes the decision logic in `TerminalInput::HandleKey` had to be
rewritten.
## PR Checklist
* [x] CLA signed
* [x] Tests added/passed
* [x] I've discussed this with core contributors already.
## Validation Steps Performed
* See #3516.
* I don't have any keyboard that generates surrogate characters. Due to
this I modified `TermControl::_SendPastedTextToConnection` to send the
data to `_terminal->SendCharEvent()` instead. I then pasted the test
string ""𐐌𐐜𐐬" and ensured that the new `TerminalInput::_SendChar`
method still correctly assembles surrogate pairs.
Closes#3516Closes#3554 (obsoleted by this PR)
Potentially impacts #391, which sounds like a duplicate of #3516
## Summary of the Pull Request
Changes default font from Consolas to Cascadia Code.
## PR Checklist
* [x] Closes#4943
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I deleted my profiles.json and built from source. All profiles appeared in Cascadia Code.
Adds support for setting the cursor visibility in Terminal. Visibility
is a property entirely independent from whether the cursor is "on" or
not. The cursor blinker _should_ change the "IsOn" property. It was
actually changing the "Visible" property, which was incorrect. This PR
additionally corrects the naming of the method used by the cursor
blinker, and makes it do the right thing.
I added a pair of tests, one taken straight from conhost. In
copy-pasting that test, I took it a step further and implemented
`^[[?12h`, `^[[?12l`, which enables/disables cursor blinking, for the
`TerminalCore`. THIS DOES NOT ADD SUPPORT FOR DISABLING BLINKING IN THE
APP. Conpty doesn't emit the blinking on/off sequences quite yet, but
when it _does_, the Terminal will be ready.
## References
* I'd bet this conflicts with #2892
* This isn't a solution for #1379
* There shockingly isn't an issue for cursor blink state via conpty...?
## PR Checklist
* [x] Closes#3093
* [x] Closes#3499
* [x] Closes#4644
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
PR #4548 inadvertantly broke mouse button input in the WPF control. This happened due to the extra layer of HWND indirection. The fix is to move the mouse button handling down into the native control where the window messages are now being sent.
- When performing chunk selection, the expansion now occurs at the time
of the selection, not the rendering of the selection
- `GetSelectionRects()` was moved to the `TextBuffer` and is now shared
between ConHost and Windows Terminal
- Some of the selection variables were renamed for clarity
- Selection COORDs are now in the Text Buffer coordinate space
- Fixes an issue with Shift+Click after performing a Multi-Click
Selection
## References
This also contributes to...
- #4509: UIA Box Selection
- #2447: UIA Signaling for Selection
- #1354: UIA support for Wide Glyphs
Now that the expansion occurs at before render-time, the selection
anchors are an accurate representation of what is selected. We just need
to move `GetText` to the `TextBuffer`. Then we can have those three
issues just rely on code from the text buffer. This also means ConHost
gets some of this stuff for free 😀
### TextBuffer
- `GetTextRects` is the abstracted form of `GetSelectionRects`
- `_ExpandTextRow` is still needed to handle wide glyphs properly
### Terminal
- Rename...
- `_boxSelection` --> `_blockSelection` for consistency with ConHost
- `_selectionAnchor` --> `_selectionStart` for consistency with UIA
- `_endSelectionPosition` --> `_selectionEnd` for consistency with
UIA
- Selection anchors are in Text Buffer coordinates now
- Really rely on `SetSelectionEnd` to accomplish appropriate chunk
selection and shift+click actions
## Validation Steps Performed
- Shift+Click
- Multi-Click --> Shift+Click
- Chunk Selection at...
- top of buffer
- bottom of buffer
- random region in scrollback
Closes#4465Closes#4547
This PR hooks up the existing UIA implementation to the WPF control. Some existing code that was specific to the UWP terminal control could be shared so that has been refactored to a common location as well.
## Validation Steps Performed
WPF control was brought up in UISpy and the UIA tree was verified. NVDA was then used to check that screen readers were operating properly.
* Remove unneeded c_str() calls when converting an hstring to a wstring_view.
* Remove unneeded c_str() calls when constructing a FontInfo class with a wstring face name.
* Remove unneeded winrt::to_hstring calls when passing a wstring to a method that expects an hstring.
* Remove unneeded c_str() calls when passing an hstring to a method that already accepts hstrings without conversion.
* Remove unneeded c_str() and data() calls when explicitly constructing an hstring from a wstring.
This adds the WPF control to our project, courtesy of the Visual Studio team.
It re-hosts the Terminal Control components inside a reusable WPF adapter so it can be composed onto C# type surfaces like Visual Studio requires.
