This regressed around the #7163 timeframe.
We're discussing this on chat currently. It might break the intellisense
on the `#include <winrt/Microsoft.Terminal.TerminalControl.h>` line in
VS 16.7, but we're not _really_ sure? Intellisense has been notoriously
flaky for us.
I'm running 16.6.5, and it works for me. @lhecker is running 16.7 and
confirmed it worked there. If the CI build passes, then this definitely
will work for 16.7.
If you scroll up to view the scrollback, then we want the viewport to
"stay in place", as new output comes in (see #6062). This works fine up
until the buffer circles. In this case, the mutable viewport isn't
actually moving, so we never set `updatedViewport` to true.
This regressed in #6062Closes#7222
This PR adds support for the ANSI _doubly underlined_ graphic rendition
attribute, which is enabled by the `SGR 21` escape sequence.
There was already an `ExtendedAttributes::DoublyUnderlined` flag in the
`TextAttribute` class, but I needed to add `SetDoublyUnderlined` and
`IsDoublyUnderlined` methods to access that flag, and update the
`SetGraphicsRendition` methods of the two dispatchers to set the
attribute on receipt of the `SGR 21` sequence. I also had to update the
existing `SGR 24` handler to reset _DoublyUnderlined_ in addition to
_Underlined_, since they share the same reset sequence.
For the rendering, I've added a new grid line type, which essentially
just draws an additional line with the same thickness as the regular
underline, but slightly below it - I found a gap of around 0.05 "em"
between the lines looked best. If there isn't enough space in the cell
for that gap, the second line will be clamped to overlap the first, so
you then just get a thicker line. If there isn't even enough space below
for a thicker line, we move the offset _above_ the first line, but just
enough to make it thicker.
The only other complication was the update of the `Xterm256Engine` in
the VT renderer. As mentioned above, the two underline attributes share
the same reset sequence, so to forward that state over conpty we require
a slightly more complicated process than with most other attributes
(similar to _Bold_ and _Faint_). We first check whether either underline
attribute needs to be turned off to send the reset sequence, and then
check individually if each of them needs to be turned back on again.
## Validation Steps Performed
For testing, I've extended the existing attribute tests in
`AdapterTest`, `VTRendererTest`, and `ScreenBufferTests`, to make sure
we're covering both the _Underlined_ and _DoublyUnderlined_ attributes.
I've also manually tested the `SGR 21` sequence in conhost and Windows
Terminal, with a variety of fonts and font sizes, to make sure the
rendering was reasonably distinguishable from a single underline.
Closes#2916
MouseInput was directly asking user32 about the state of the mouse buttons,
which was somewhat of a layering violation. This commit makes all callers
have to pass the mouse state in themselves.
Closes#4869
This PR adds support for per-profile tab colors, in accordance with
#7134. This adds a single `tabColor` property, that when set, specifies
the background color for profile's tab. This color can be overridden by
the color picker, and clearing the color with the color picker will
revert to this default color set for the tab.
* Full theming is covered in #3327 & #5772
Validation: Played with setting this color, both on launch and via
hot-reload
Specified in #7134Closes#1337
## Summary of the Pull Request
Move `ICoreSettings` and `IControlSettings` from the TerminalSettings project to the TerminalCore and TerminalControl projects respectively. Also entirely removes the TerminalSettings project.
The purpose of these interfaces is unchanged. `ICoreSettings` is used to instantiate a terminal. `IControlSettings` (which requires an `ICoreSettings`) is used to instantiate a UWP terminal control.
## References
Closes#7140
Related Epic: #885
Related Spec: #6904
## PR Checklist
* [X] Closes#7140
* [X] CLA signed
* [X] Tests ~added~/passed (no additional tests necessary)
* [X] ~Documentation updated~
* [X] ~Schema updated~
## Detailed Description of the Pull Request / Additional comments
A lot of the work here was having to deal with winmd files across all of these projects. The TerminalCore project now outputs a Microsoft.Terminal.TerminalControl.winmd. Some magic happens in TerminalControl.vcxproj to get this to work properly.
## Validation Steps Performed
Deployed Windows Terminal and opened a few new tabs.
Up until #4999 we deferred all key events to the character event handler
for which `ToUnicodeEx` returned a valid character and alternatively
those who aren't a special key combination as listed in
`TerminalInput`'s implementation.
Since #4999 we started acknowledging/handling all key events no matter
whether they're actually a known key combination. Given non-ASCII inputs
the Win32 `SendInput()` method generates certain sequences that aren't
recognizable combinations though and if they're handled by the key event
handler no follow up character event is sent containing the unicode
character.
This PR adds another condition and defers all key events without scan
code (i.e. those not representable by the current keyboard layout) to
the character event handler.
I'm absolutely not certain that this PR doesn't have a negative effect
on other kinds of inputs.
Is it common for key events to not contain a scan code? I personally
haven't seen it happen before AutoHotKey/SendInput.
Before this PR is merged it'd be nice to have a good testing plan in
place in order to ensure nothing breaks.
## Validation Steps Performed
Remapped `AltGr+8` to `»` using AutoHotKey using `<^>!8::SendInput {Raw}»`.
Ensured `»` is printed if `AltGr+8` is pressed.
Closes#7064Closes#7120
This pull request fixes capture and event generation in VT mouse mode
for both conhost and terminal.
Fixes#6401.
[1/3] Terminal: clamp mouse events to the viewport, don't throw them away
gnome-terminal (at least) sends mouse events whose x/y are at the
extreme ends of the buffer when a drag starts inside the terminal and
then exits it.
We would previously discard any mouse events that exited the borders of
the viewport. Now we will keep emitting events where X/Y=0/w/h.
[2/3] conhost: clamp VT mouse to viewport, capture pointer
This is the same as (1), but for conhost. conhost wasn't already
capturing the pointer when VT mouse mode was in use. By capturing, we
ensure that events that happen outside the screen still result in events
sent to an application (like a release after a drag)
[3/3] wpf: capture the pointer when VT mouse is enabled
This is the same as (2), but for the WPF control. Clamping is handled
in TerminalCore in (1), so we didn't need to do it in WPF.
## Summary of the Pull Request
Text can have various attributes, such as "bold", "italic", "underlined", etc. The TextAttribute class embodies this. It has methods to set/query these attributes.
This change tweaks a few of the method names to make them match. I.e. for an imaginary text property "Foo", we should have methods along the lines of:
```
IsFoo
SetFoo(bool isFoo)
```
And variations should match: we should have "Foo" and "OverFoo", not "Fooey" and "OverFoo".
I chose to standardize on the adjective form, since that's what we are closest to already. The attributes I attacked here are:
SetItalic**s** --> SetItalic
SetUnderline --> SetUnderline**d**
SetOverline --> SetOverline**d**
("italic" is an adjective; "italics" is a plural noun, representing letters or words in an italic typeface)
And I also added methods for "DoublyUnderlined" for good measure.
I stopped short of renaming the GraphicsOptions enum values to match, too; but I'd be willing to do that in a follow-up change if people wanted it.
## Validation Steps Performed
It builds, and tests still pass.
We were using std::basic_string_view as a stand-in for std::span so that
we could change over all at once when C++20 dropped with full span
support. That day's not here yet, but as of 54a7fce3e we're using GSL 3,
whose span is C++20-compliant.
This commit replaces every instance of basic_string_view that was not
referring to an actual string with a span of the appropriate type.
I moved the `const` qualifier into span's `T` because while
`basic_string_view.at()` returns `const T&`, `span.at()` returns `T&`
(without the const). I wanted to maintain the invariant that members of
the span were immutable.
* Mechanical Changes
* `sv.at(x)` -> `gsl::at(sp, x)`
* `sv.c{begin,end}` -> `sp.{begin,end}` (span's iterators are const)
I had to replace a `std::basic_string<>` with a `std::vector<>` in
ConImeInfo, and I chose to replace a manual array walk in
ScreenInfoUiaProviderBase with a ranged-for. Please review those
specifically.
This will almost certainly cause a code size regression in Windows
because I'm blowing out all the PGO counts. Whoops.
Related: #3956, #975.
GSL 3, the next major version of GSL after the one we're using, replaced
their local implementation of `span` with one that more closely mimics
C++20's span. Unfortunately, that is a breaking change for all of GSL's
consumers.
This commit updates our use of span to comply with the new changes in
GSL 3.
Chief among those breaking changes is:
* `span::at` no longer exists; I replaced many instances of `span::at`
with `gsl::at(x)`
* `span::size_type` has finally given up on `ptrdiff_t` and become
`size_t` like all other containers
While I was here, I also made the following mechanical replacements:
* In some of our "early standardized" code, we used std::optional's
`has_value` and `value` back-to-back. Each `value` incurs an
additional presence test.
* Change: `x.value().member` -> `x->member` (`optional::operator->`
skips the presence test)
* Change: `x.value()` -> `*x` (as above)
* GSL 3 uses `size_t` for `size_type`.
* Change: `gsl::narrow<size_t>(x.size())` -> `x.size()`
* Change: `gsl::narrow<ptrdiff_t>(nonSpan.size())` -> `nonSpan.size()`
during span construction
I also replaced two instances of `x[x.size() - 1]` with `x.back()` and
one instance of a manual array walk (for comparison) with a direct
comparison.
NOTE: Span comparison and `make_span` are not part of the C++20 span
library.
Fixes#6251
## Summary of the Pull Request
This PR adds support for the `SGR 2` escape sequence, which enables the
ANSI _faint_ graphic rendition attribute. When a character is output
with this attribute set, it uses a dimmer version of the active
foreground color.
## PR Checklist
* [x] Closes#6703
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #6703
## Detailed Description of the Pull Request / Additional comments
There was already an `ExtendedAttributes::Faint` flag in the
`TextAttribute` class, but I needed to add `SetFaint` and `IsFaint`
methods to access that flag, and update the `SetGraphicsRendition`
methods of the two dispatchers to set the attribute on receipt of the
`SGR 2` sequence. I also had to update the existing `SGR 22` handler to
reset _Faint_ in addition to _Bold_, since they share the same reset
sequence. For that reason, I thought it a good idea to change the name
of the `SGR 22` enum to `NotBoldOrFaint`.
For the purpose of rendering, I've updated the
`TextAttribute::CalculateRgbColors` method to return a dimmer version of
the foreground color when the _Faint_ attribute is set. This is simply
achieved by dividing each color component by two, which produces a
reasonable effect without being too complicated. Note that the _Faint_
effect is applied before _Reverse Video_, so if the output it reversed,
it's the background that will be faint.
The only other complication was the update of the `Xterm256Engine` in
the VT renderer. As mentioned above, _Bold_ and _Faint_ share the same
reset sequence, so to forward that state over conpty we have to go
through a slightly more complicated process than with other attributes.
We first check whether either attribute needs to be turned off to send
the reset sequence, and then check if the individual attributes need to
be turned on again.
## Validation
I've extended the existing SGR unit tests to cover the new attribute in
the `AdapterTest`, the `ScreenBufferTests`, and the `VtRendererTest`,
and added a test to confirm the color calculations when _Faint_ is set
in the `TextAttributeTests`.
I've also done a bunch of manual testing with all the different VT color
types and confirmed that our output is comparable to most other
terminals.
This is a refactoring of the renderer color calculations to simplify the
implementation, and to make it easier to support additional
color-altering rendition attributes in the future (e.g. _faint_ and
_conceal_).
## References
* This is a followup to PRs #3817 and #6809, which introduced additional
complexity in the color calculations, and which suggested the need for
refactoring.
## Detailed Description of the Pull Request / Additional comments
When we added support for `DECSCNM`, that required the foreground and
background color lookup methods to be able to return the opposite of
what was requested when the reversed mode was set. That made those
methods unnecessarily complicated, and I thought we could simplify them
considerably just by combining the calculations into a single method
that derived both colors at the same time.
And since both conhost and Windows Terminal needed to perform the same
calculations, it also made sense to move that functionality into the
`TextAttribute` class, where it could easily be shared.
In general this way of doing things is a bit more efficient. However, it
does result in some unnecessary work when only one of the colors is
required, as is the case for the gridline painter. So to make that less
of an issue, I've reordered the gridline code a bit so it at least
avoids looking up the colors when no gridlines are needed.
## Validation Steps Performed
Because of the API changes, quite a lot of the unit tests had to be
updated. For example instead of verifying colors with two separate calls
to `LookupForegroundColor` and `LookupBackgroundColor`, that's now
achieved with a single `LookupAttributeColors` call, comparing against a
pair of values. The specifics of the tests haven't changed though, and
they're all still working as expected.
I've also manually confirmed that the various color sequences and
rendition attributes are rendering correctly with the new refactoring.
## Summary of the Pull Request
This PR adds full support for the `DECSCNM` reverse screen mode in the Windows Terminal to align with the implementation in conhost.
## References
* The conhost implementation of `DECSCNM` was in PR #3817.
* WT originally inherited that functionality via the colors being passed through, but that behaviour was lost in PR #6506.
## PR Checklist
* [x] Closes#6622
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #6622
## Detailed Description of the Pull Request / Additional comments
The `AdaptDispatch::SetScreenMode` now checks if it's in conpty mode and simply returns false to force a pass-through of the mode change. And the `TerminalDispatch` now has its own `SetScreenMode` implementation that tracks any changes to the reversed state, and triggers a redraw in the renderer.
To make the renderer work, we just needed to update the `GetForegroundColor` and `GetBackgroundColor` methods of the terminal's `IRenderData` implementation to check the reversed state, and switch the colors being calculated, the same way the `LookupForegroundColor` and `LookupBackgroundColor` methods work in the conhost `Settings` class.
## Validation Steps Performed
I've manually tested the `DECSCNM` functionality for Windows Terminal in Vttest, and also with some of my own test scripts.
## Summary of the Pull Request
Updates the Terminal's scroll response to new output. The Terminal will not automatically scroll if...
- a selection is active, or
- the viewport is at the bottom of the scroll history
## References
#2529 - Spec
#3863 - Implementation
## PR Checklist
* [X] Closes#980
* [X] Closes#3863
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Updates the `_scrollOffset` value properly in TerminalCore when the cursor moves. We calculate a new `_scrollOffset` based on if we are circling the buffer and how far below the mutable bottom is.
We specifically check for if a selection is active and if the viewport is at the bottom, then use that as a condition for deciding if we should update `_scrollOffset` to the new calculated value or 0 (the bottom of the scroll history).
## Validation Steps Performed
Manual testing. Though I should add automated tests.
- [X] new output
- [X] new output when circling
- [X] new output when circling and viewport is at the top
## Summary of the Pull Request
This PR adds support for the `SGR 53` and `SGR 55` escapes sequences,
which enable and disable the ANSI _overline_ graphic rendition
attribute, the equivalent of the console character attribute
`COMMON_LVB_GRID_HORIZONTAL`. When a character is output with this
attribute set, a horizontal line is rendered at the top of the character
cell.
## PR Checklist
* [x] Closes#6000
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
To start with, I added `SetOverline` and `IsOverlined` methods to the
`TextAttribute` class, to set and get the legacy
`COMMON_LVB_GRID_HORIZONTAL` attribute. Technically there was already an
`IsTopHorizontalDisplayed` method, but I thought it more readable to add
a separate `IsOverlined` as an alias for that.
Then it was just a matter of adding calls to set and reset the attribute
in response to the `SGR 53` and `SGR 55` sequences in the
`SetGraphicsRendition` methods of the two dispatchers. The actual
rendering was already taken care of by the `PaintBufferGridLines` method
in the rendering engines.
The only other change required was to update the `_UpdateExtendedAttrs`
method in the `Xterm256Engine` of the VT renderer, to ensure the
attribute state would be forwarded to the Windows Terminal over conpty.
## Validation Steps Performed
I've extended the existing SGR unit tests to cover the new attribute in
the `AdapterTest`, the `OutputEngineTest`, and the `VtRendererTest`.
I've also manually tested the `SGR 53` and `SGR 55` sequences to confirm
that they do actually render (or remove) an overline on the characters
being output.
The VT reset operations `RIS` and `DECSTR` are implemented as a series
of steps, each of which could potentially fail. Currently these
operations abort as soon as an error is detected, which is particularly
problematic in conpty mode, where some steps deliberately "fail" to
indicate that they need to be "passed through" to the conpty client. As
a result, the reset won't be fully executed. This PR changes that
behaviour, so the error state is recorded for any failures, but the
subsequent steps are still run.
Originally the structure of these operations was of the form:
bool success = DoSomething();
if (success)
{
success = DoSomethingElse();
}
But I've now changed the code so it looks more like this:
bool success = DoSomething();
success = DoSomethingElse() && success;
This means that every one of the steps should execute, regardless of
whether previous steps were successful, but the final _success_ state
will only be true if none of the steps has failed.
While this is only really an issue in the conhost code, I've updated
both the `AdaptDispatch` and `TerminalDispatch` classes, since I thought
it would be best to have them in sync, and in general this seems like a
better way to handle multi-step operations anyway.
VALIDATION
I've manually tested the `RIS` escape sequence (`\ec`) in the Windows
Terminal, and confirmed that it now correctly resets the cursor
position, which it wasn't doing before.
Closes#6545
This is essentially a rewrite of the
`TerminalDispatch::SetGraphicsRendition` method, bringing it into closer
alignment with the `AdaptDispatch` implementation, simplifying the
`ITerminalApi` interface, and making the code easier to extend. It adds
support for a number of attributes which weren't previously implemented.
REFERENCES
* This is a mirror of the `AdaptDispatch` refactoring in PR #5758.
* The closer alignment with `AdaptDispatch` is a small step towards
solving issue #3849.
* The newly supported attributes should help a little with issues #5461
(italics) and #6205 (strike-through).
DETAILS
I've literally copied and pasted the `SetGraphicsRendition`
implementation from `AdaptDispatch` into `TerminalDispatch`, with only
few minor changes:
* The `SetTextAttribute` and `GetTextAttribute` calls are slightly
different in the `TerminalDispatch` version, since they don't return a
pointless `success` value, and in the case of the getter, the
`TextAttribute` is returned directly instead of by reference.
Ultimately I'd like to move the `AdaptDispatch` code towards that way
of doing things too, but I'd like to deal with that later as part of a
wider refactoring of the `ConGetSet` interface.
* The `SetIndexedForeground256` and `SetIndexedBackground256` calls
required the color indices to be remapped in the `AdaptDispatch`
implementation, because the conhost color table is in a different
order to the XTerm standard. `TerminalDispatch` doesn't have that
problem, so doesn't require the mapping.
* The index color constants used in the 16-color `SetIndexedForeground`
and `SetIndexedBackground` calls are also slightly different for the
same reason.
VALIDATION
I cherry-picked this code on top of the #6506 and #6698 PRs, since
that's only way to really get the different color formats passed-through
to the terminal. I then ran a bunch of manual tests with various color
coverage scripts that I have, and confirmed that all the different color
formats were being rendered as expected.
Closes#6725
With this commit, terminal will be able to copy text to the system
clipboard by using OSC 52 MANIPULATE SELECTION DAATA.
We chose not to implement the clipboard querying functionality offered
by OSC 52, as sending the clipboard text to an application without the
user's knowledge or consent is an immense security hole.
We do not currently support the clipboard specifier Pc to specify which
clipboard buffer should be filled
# Base64 encoded `foo`
$ echo -en "\e]52;;Zm9v\a"
# Multiple lines
# Base64 encoded `foo\r\nbar`
$ echo -en "\e]52;;Zm9vDQpiYXI=\a"
Closes#2946.
This pull request implements shift+double/triple click. Proper behavior
(as described in #4557) is to only expand one selection point, not both.
Adding the `bool targetStart` was a bit weird. I decided on this being
the cleanest approach though because I still want `PivotSelection` to be
its own helper function. Otherwise, the concept of "pivoting" gets kinda
messy.
## Validation Steps Performed
Manual testing as described on attached issue.
Tests were added for Shift+Click and pivoting the selection too.
Closes#4557
## Summary of the Pull Request
Fixes#6377. `TerminalCore` does not initialize `_altGrAliasing`. The impact is minimized in WT because it defaults to `true` in higher layers. It's not initialized when WPF is driving.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6377
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Summary of the Pull Request
Prior to #6309, we'd only snap on input for non-modifier key_down_ events. #6423 fixed this for modifier keys, but didn't fix this for keyups.
## References
* #6423 was an incomplete fix to this problem, which caused this regression
## PR Checklist
* [x] Closes#6481
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
In addition to the below (original) description, this commit introduces
a ThrottledFunc template that can throttle _any_ function. It applies
that type to muffle updates to the scrollbar.
---
Redo #3531 but without the bug that it caused (#3622) which is why it
was reverted.
I'm sorry if I explain this badly. If you don't understand a part, make
sure to let me know and I will explain it better.
### Explanation
How it worked before: `Terminal` signals that viewport changed ->
`TermControl::_TerminalScrollPositionChanged` gets called on the
terminal thread -> it dispatches work for later to be ran the UI thread
to updates the scrollbar's values
Why it's bad:
* If we have many viewport changes, it will create a long stack of
operations to run. Instead, we should just update the scroll bar with
the most recent information that we know.
* Imagine if the rate that the work gets pushed on the UI thread is
greater than the rate that it can handle: it might freeze?
* No need to be real time, we can wait just a little bit (8ms) to
accumulate viewport changes before we actually change the scroll bar's
value because it appears to be expensive (see perf below).
Now: `Terminal` signals that viewport changed ->
`TermControl::_TerminalScrollPositionChanged` gets called on the
terminal thread -> it tells the `ScrollBarUpdater` about a new update ->
the `ScrollBarUpdater` only runs one job (I don't know if that's the
right term) on the UI thread at a time. If a job is already running but
hasn't updated the scroll bar yet, it changes the setting in the already
existing job to update the scroll bar with the new values. A job "waits"
some time before doing the update to throttle updates because we don't
need real time scroll bar updates. -> eventually, it updates the scroll
bar If the user scrolls when a scroll bar update is pending, we keep the
scroll bar's Maximum and Minimum but let the user choose its new Value
with the `CancelPendingValueChange` method.
### Note
Also I changed a little bit the code from the Terminal to notify the
TermControl less often when possible.
I tried to scroll with the scroll bar, with the mouse wheel. I tried to
scroll while content is being outputted.
I tried to reproduce the crash from #2248 without success (good).
Co-authored-by: Leonard Hecker <leonard@hecker.io>
Closes#3622
Does what it says on the label. Pure modifier keys weren't making it
this far at all prior to #6309. This PR changes these methods to make
sure that we only dismiss a selection or snap on input when the key
pressed isn't a modifier key.
## References
* regressed in #6309
## PR Checklist
* [x] Closes#6423
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* Tried to repro this in the Terminal, couldn't anymore.
When opening a new tab, it takes a few milliseconds before title to
appears. This PR makes it instantaneous.
* Updated the Terminal so that it can load the title from the settings
before it is initialized.
* Load terminal settings in TermControl constructor before the terminal
is initialized (see above).
* Update Tab so that it sets the TabViewItem's title in the constructor
(in Tab::_MakeTabViewItem) instead of waiting for the VT sequence to
set the title (from what I understand).
NOTE 1: there is a similar problem with the tabview icon which is not
fixed by this PR.
NOTE 2: This is only a problem with animations disabled because
otherwise the title fades in so there is enough time for it to be set
when it becomes visible.
## Validation
I ran the terminal and opened a new tab. The title appears instantly.
Adds support for `win32-input-mode` to conhost, conpty, and the Windows
Terminal.
* The shared `terminalInput` class supports sending these sequences when
a VT client application requests this mode.
* ConPTY supports synthesizing `INPUT_RECORD`s from the input sent to it
from a terminal
* ConPTY requests this mode immediately on startup (if started with a
new flag, `PSEUDOCONSOLE_WIN32_INPUT_MODE`)
* The Terminal now supports sending this input as well, when conpty asks
for it.
Also adds a new ConPTY flag `PSEUDOCONSOLE_WIN32_INPUT_MODE` which
requests this functionality from conpty, and the Terminal requests this
by default.
Also adds `experimental.input.forceVT` as a global setting to let a user
opt-out of this behavior, if they don't want it / this ends up breaking
horribly.
## Validation Steps Performed
* played with this mode in vtpipeterm
* played with this mode in Terminal
* checked a bunch of scenarios, as outlined in a [comment] on #4999
[comment]: https://github.com/microsoft/terminal/issues/4999#issuecomment-628718631
References #4999: The megathread
References #5887: The spec
Closes#879Closes#2865Closes#530Closes#3079Closes#1119Closes#1694Closes#3608Closes#4334Closes#4446
## Summary of the Pull Request
Some people wish to use Ctrl+Alt combinations without Windows treating those as an alias for AltGr combinations. This PR adds a new `altGrAliasing` setting allowing one to control this behavior.
## PR Checklist
* [x] Closes#6211
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Manual testing
* [x] Requires documentation to be updated: https://github.com/MicrosoftDocs/terminal/issues/50
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* Choose a German keyboard layout
* Using `showkey -a` ensured that both `Ctrl+Alt+Q/E` and `AltGr+Q/E` produce `@/€`
* Added `"altGrAliasing": false` to the WSL profile
* Using `showkey -a` ensured `Ctrl+Alt+Q/E` now produces `^[^Q/E` while `AltGr+Q/E` continues to produce `@/€`
This PR introduces a new `ColorType` to allow us to distinguish between
`SGR` indexed colors from the 16 color table, the lower half of which
can be brightened, and the ISO/ITU indexed colors from the 256 color
table, which have a fixed brightness. Retaining the distinction between
these two types will enable us to forward the correct `SGR` sequences to
conpty when addressing issue #2661.
The other benefit of retaining the color index (which we didn't
previously do for ISO/ITU colors) is that it ensures that the colors are
updated correctly when the color scheme is changed.
## References
* This is another step towards fixing the conpty narrowing bugs in issue
#2661.
* This is technically a fix for issue #5384, but that won't be apparent
until #2661 is complete.
## PR Checklist
* [x] Closes#1223
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
The first part of this PR was the introduction of a new `ColorType` in
the `TextColor` class. Instead of just the one `IsIndex` type, there is
now an `IsIndex16` and an `IsIndex256`. `IsIndex16` covers the eight
original ANSI colors set with `SGR 3x` and `SGR 4x`, as well as the
brighter aixterm variants set with `SGR 9x` and `SGR 10x`. `IsIndex256`
covers the 256 ISO/ITU indexed colors set with `SGR 38;5` and `SGR
48;5`.
There are two reasons for this distinction. The first is that the ANSI
colors have the potential to be brightened by the `SGR 1` bold
attribute, while the ISO/ITO color do not. The second reason is that
when forwarding an attributes through conpty, we want to try and
preserve the original SGR sequence that generated each color (to the
extent that that is possible). By having the two separate types, we can
map the `IsIndex16` colors back to ANSI/aixterm values, and `IsIndex256`
to the ISO/ITU sequences.
In addition to the VT colors, we also have to deal with the legacy
colors set by the Windows console APIs, but we don't really need a
separate type for those. It seemed most appropriate to me to store them
as `IsIndex256` colors, since it doesn't make sense to have them
brightened by the `SGR 1` attribute (which is what would happen if they
were stored as `IsIndex16`). If a console app wanted a bright color it
would have selected one, so we shouldn't be messing with that choice.
The second part of the PR was the unification of the two color tables.
Originally we had a 16 color table for the legacy colors, and a separate
table for the 256 ISO/ITU colors. These have now been merged into one,
so color table lookups no longer need to decide which of the two tables
they should be referencing. I've also updated all the methods that took
a color table as a parameter to use a `basic_string_view` instead of
separate pointer and length variables, which I think makes them a lot
easier and safer to work with.
With this new architecture in place, I could now update the
`AdaptDispatch` SGR implementation to store the ISO/ITU indexed colors
as `IsIndex256` values, where before they were mapped to RGB values
(which prevented them reflecting any color scheme changes). I could also
update the `TerminalDispatch` implementation to differentiate between
the two index types, so that the `SGR 1` brightening would only be
applied to the ANSI colors.
I've also done a bit of code refactoring to try and minimise any direct
access to the color tables, getting rid of a lot of places that were
copying tables with `memmove` operations. I'm hoping this will make it
easier for us to update the code in the future if we want to reorder the
table entries (which is likely a requirement for unifying the
`AdaptDispatch` and `TerminalDispatch` implementations).
## Validation Steps Performed
For testing, I've just updated the existing unit tests to account for
the API changes. The `TextColorTests` required an extra parameter
specifying the index type when setting an index. And the `AdapterTest`
and `ScreenBufferTests` required the use of the new `SetIndexedXXX`
methods in order to be explicit about the index type, instead of relying
on the `TextAttribute` constructor and the old `SetForeground` and
`SetBackground` methods which didn't have a way to differentiate index
types.
I've manually tested the various console APIs
(`SetConsoleTextAttribute`, `ReadConsoleOutputAttribute`, and
`ReadConsoleOutput`), to make sure they are still setting and reading
the attributes as well as they used to. And I've tested the
`SetConsoleScreenBufferInfoEx` and `GetConsoleScreenBufferInfoEx` APIs
to make sure they can read and write the color table correctly. I've
also tested the color table in the properties dialog, made sure it was
saved and restored from the registry correctly, and similarly saved and
restored from a shortcut link.
Note that there are still a bunch of issues with the color table APIs,
but no new problems have been introduced by the changes in this PR, as
far as I could tell.
I've also done a bunch of manual tests of `OSC 4` to make sure it's
updating all the colors correctly (at least in conhost), and confirmed
that the test case in issue #1223 now works as expected.
This pull request moves swaths of Cascadia to use `til::color` for color
interop. There are still some places where we use `COLORREF`, such as in
the ABI boundaries between WinRT components.
I've also added two more til::color helpers - `with_alpha`, which takes
an existing color and sets its alpha component, and a
`Windows::UI::Color` convertor pair.
Future direction might include a `TerminalSettings::Color` type at the
idl boundary so we can finally stop using UInt32s (!) for color.
## Validation Steps Performed
Tested certain fragile areas:
* [x] setting the background with OSC 11
* [x] setting the background when acrylic is in use (which requires
low-alpha)
It turns out that we weren't really adequately guarding calls to
SetSelectionEnd and friends.
We're clearing the active selection when the window resizes, but we're
doing so by nulling out the std::optional<Selection> it lives in. Later,
though, when we set the selection endpoint we're using "_selection->".
Optional's operator-> has undefined behavior when the optional doesn't
have a value in it.
In our case, it looks like it was returning whatever the value was prior
to it being emptied out. PivotSelection would attempt to access an
out-of-bounds coordinate when the buffer got smaller during a resize.
The solution is to guard both levels of selection endpoint manipulation
in a check for an active selection.
Apparently, this accounts for somewhere between 7% and 14% of our
crashes on 1.0RC1.
Repro was:
Use Win+Arrow to snap the window while in the middle of a selection.
This is an attempt to simplify the SGR (Select Graphic Rendition)
implementation in conhost, to cut down on the number of methods required
in the `ConGetSet` interface, and pave the way for future improvements
and bug fixes. It already fixes one bug that prevented SGR 0 from being
correctly applied when combined with meta attributes.
* This a first step towards fixing the conpty narrowing bugs in issue
#2661
* I'm hoping the simplification of `ConGetSet` will also help with
#3849.
* Some of the `TextAttribute` refactoring in this PR overlaps with
similar work in PR #1978.
## Detailed Description of the Pull Request / Additional comments
The main point of this PR was to simplify the
`AdaptDispatch::SetGraphicsRendition` implementation. So instead of
having it call a half a dozen methods in the `ConGetSet` API, depending
on what kinds of attributes needed to be set, there is now just one call
to get current attributes, and another call to set the new value. All
adjustments to the attributes are made in the `AdaptDispatch` class, in
a simple switch statement.
To help with this refactoring, I also made some change to the
`TextAttribute` class to make it easier to work with. This included
adding a set of methods for setting (and getting) the individual
attribute flags, instead of having the calling code being exposed to the
internal attribute structures and messing with bit manipulation. I've
tried to get rid of any methods that were directly setting legacy, meta,
and extended attributes.
Other than the fix to the `SGR 0` bug, the `AdaptDispatch` refactoring
mostly follows the behaviour of the original code. In particular, it
still maps the `SGR 38/48` indexed colors to RGB instead of retaining
the index, which is what we ultimately need it to do. Fixing that will
first require the color tables to be unified (issue #1223), which I'm
hoping to address in a followup PR.
But for now, mapping the indexed colors to RGB values required adding an
an additional `ConGetSet` API to lookup the color table entries. In the
future that won't be necessary, but the API will still be useful for
other color reporting operations that we may want to support. I've made
this API, and the existing setter, standardise on index values being in
the "Xterm" order, since that'll be essential for unifying the code with
the terminal adapter one day.
I should also point out one minor change to the `SGR 38/48` behavior,
which is that out-of-range RGB colors are now ignored rather than being
clamped, since that matches the way Xterm works.
## Validation Steps Performed
This refactoring has obviously required corresponding changes to the
unit tests, but most were just minor updates to use the new
`TextAttribute` methods without any real change in behavior. However,
the adapter tests did require significant changes to accommodate the new
`ConGetSet` API. The basic structure of the tests remain the same, but
the simpler API has meant fewer values needed to be checked in each test
case. I think they are all still covering the areas there were intended
to, though, and they are all still passing.
Other than getting the unit tests to work, I've also done a bunch of
manual testing of my own. I've made sure the color tests in Vttest all
still work as well as they used to. And I've confirmed that the test
case from issue #5341 is now working correctly.
Closes#5341
## Summary of the Pull Request
We accidentally missed switching one `TriggerRedrawAll` to `TriggerScroll`. This does that.
## References
#5185 - applies logic from this PR
## PR Checklist
* [X] Closes#5756
## Validation Steps Performed
Followed bug repro steps.
## Summary of the Pull Request
This PR clamp the "new rows" scrolling value to a positive number. We can't create a negative number of new rows. It also adds a test.
## References
## PR Checklist
* [x] Closes#5540
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
The origin of this bug is that as newlines are emitted, we'll accumulate an enormous scroll delta into a selection region, to the point of overflowing a `SHORT`. When the overflow occurs, the `Terminal` would fail to send a `NotifyScroll()` to the `TermControl` hosting it.
For this bug to repro, we need to:
- Have a sufficiently large buffer, because each newline we'll accumulate a delta of (0, ~bufferHeight), so (bufferHeight^2 + bufferHeight) > SHRT_MAX
- Have a selection
## Validation Steps Performed
* Dustin verified this actually
* Created a new insane test case
In order to support a transparent background for the acrylic effect, the
renderer sets the alpha value to zero for the default background color.
However, when the _reversed video_ attribute is set, the background is
actually filled with the foreground color, and will not be displayed
correctly if it is made transparent. This PR addresses that issue by
making sure the rendered background color is opaque if the reversed
video attribute is set.
## References
* This is not a major issue at the moment, since the _reverse video_
attribute is not typically forwarded though conpty, but that will
change once #2661 is fixed.
## PR Checklist
* [x] Closes#5498
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not
checked, I'm ready to accept this work might be rejected in favor of a
different grand plan. Issue number where discussion took place: #5498
## Detailed Description of the Pull Request / Additional comments
This simply adds an additional check in `Terminal::GetBackgroundColor`
to make sure the returned color is opaque if the _reverse video_
attribute is set. At some point in the future this check may need to be
extended to support the `DECSCNM` reverse screen mode, but for now
that's not an issue.
## Validation Steps Performed
I've run the test case from issue #5498, and confirmed that it now works
as expected. I've also got an experimental fix for #2661 that I've
tested with this patch, and that now displays _reverse video_ attributes
correctly too.
Closes#5498
## Summary of the Pull Request
This pull request ports #5096 to WpfTerminalControl, bringing it in line with the selection mechanics in Terminal. It also introduces double- and triple-click selection and makes sure we clear the selection when we resize.
Please read #5096 for more details.
## Detailed Description of the Pull Request / Additional comments
This code is, largely, copy-and-pasted from TermControl with some updates to use `std::chrono` and `til::point`. I love `til::point`. A lot.
## Validation Steps Performed
Lots of manual selection.
# Summary of the Pull Request
This PR will allow the cursor to be double width when on top of a double width character. This required changing `IsCursorDoubleWidth` to check whether the glyph the cursor's on top of is double width. This code is exactly the same as the original PR that addressed this issue in #2932. That one got reverted at some point due to the crashes related to it, but due to a combination of Terminal having come further since that PR and other changes to address use-after-frees, some of the crashes may/may not be relevant now. The ones that seemed to be relevant/repro-able, I attempt to address in this PR.
The `IsCursorDoubleWidth` check would fail during the `TextBuffer::Reflow` call inside of `Terminal::UserResize` occasionally, particularly when `newCursor.EndDeferDrawing()` is called. This is because when we tell the newCursor to `EndDefer`, the renderer will attempt to redraw the cursor. As part of this redraw, it'll ask if `IsCursorDoubleWidth`, and if the renderer managed to ask this before `UserResize` swapped out the old buffer with the new one from `Reflow`, the renderer will be asking the old buffer if its out-of-bounds cursor is double width. This was pretty easily repro'd using `cmatrix -u0` and resizing the window like a madman.
As a solution, I've moved the Start/End DeferDrawing calls out of `Reflow` and into `UserResize`. This way, I can "clamp" the portion of the code where the newBuffer is getting created and reflowed and swapped into the Terminal buffer, and only allow the renderer to draw once the swap is done. This also means that ConHost's `ResizeWithReflow` needed to change slightly.
In addition, I've added a WriteLock to `SetCursorOn`. It was mentioned as a fix for a crash in #2965 (although I can't repro), and I also figured it would be good to try to emulate where ConHost locks with regards to Cursor operations, and this seemed to be one that we were missing.
## PR Checklist
* [x] Closes#2713
* [x] CLA signed
* [x] Tests added/passed
## Validation Steps Performed
Manual validation that the cursor is indeed chonky, added a test case to check that we are correctly saying that the cursor is double width (not too sure if I put it in the right place). Also open to other test case ideas and thoughts on what else I should be careful for since I am quite nervous about what other crashes might occur.
## Summary of the Pull Request
Adjusts DirectX renderer to use `til::bitmap` to track invalidation
regions. Uses special modification to invalidate a row-at-a-time to
ensure ligatures and NxM glyphs continue to work.
## References
Likely helps #1064
## PR Checklist
* [x] Closes#778
* [x] I work here.
* [x] Manual testing performed. See Performance traces in #778.
* [x] Automated tests for `til` changes.
* [x] Am core contributor. And discussed with @DHowett-MSFT.
## Detailed Description of the Pull Request / Additional comments
- Applies `til::bitmap` as the new invalidation scheme inside the
DirectX renderer and updates all entrypoints for collecting
invalidation data to coalesce into this structure.
- Semi-permanently routes all invalidations through a helper method
`_InvalidateRectangle` that will expand any invalidation to cover the
entire line. This ensures that ligatures and NxM glyphs will continue
to render appropriately while still allowing us to dramatically reduce
the number of lines drawn overall. In the future, we may come up with
a tighter solution than line-by-line invalidation and can modify this
helper method appropriately at that later date to further scope the
invalid region.
- Ensures that the `experimental.retroTerminalEffects` feature continues
to invalidate the entire display on start of frame as the shader is
applied at the end of the frame composition and will stack on itself
in an amusing fashion when we only redraw part of the display.
- Moves many member variables inside the DirectX renderer into the new
`til::size`, `til::point`, and `til::rectangle` methods to facilitate
easier management and mathematical operations. Consequently adds
`try/catch` blocks around many of the already-existing `noexcept`
methods to deal with mathematical or casting failures now detected by
using the support classes.
- Corrects `TerminalCore` redraw triggers to appropriately communicate
scrolling circumstances to the renderer so it can optimize the draw
regions appropriately.
- Fixes an issue in the base `Renderer` that was causing overlapping
scroll regions due to behavior of `Viewport::TrimToViewport` modifying
the local. This fix is "good enough" for now and should go away when
`Viewport` is fully migrated to `til::rectangle`.
- Adds multiplication and division operators to `til::rectangle` and
supporting tests. These operates will help scale back and forth
between a cell-based rectangle and a pixel-based rectangle. They take
special care to ensure that a pixel rectangle being divided downward
back to cells will expand (with the ceiling division methods) to cover
a full cell when even one pixel inside the cell is touched (as is how
a redraw would have to occur).
- Blocks off trace logging of invalid regions if no one is listening to
optimize performance.
- Restores full usage of `IDXGISwapChain1::Present1` to accurately and
fully communicate dirty and scroll regions to the underlying DirectX
framework. This additional information allows the framework to
optimize drawing between frames by eliminating data transfer of
regions that aren't modified and shuffling frames in place. See
[Remarks](https://docs.microsoft.com/en-us/windows/win32/api/dxgi1_2/nf-dxgi1_2-idxgiswapchain1-present1#remarks)
for more details.
- Updates `til::bitmap` set methods to use more optimized versions of
the setters on the `dynamic_bitset<>` that can bulk fill bits as the
existing algorithm was noticeably slow after applying the
"expand-to-row" helper to the DirectX renderer invalidation.
- All `til` import hierarchy is now handled in the parent `til.h` file
and not in the child files to prevent circular imports from happening.
We don't expect the import of any individual library file, only the
base one. So this should be OK for now.
## Validation Steps Performed
- Ran `cmatrix`, `cmatrix -u0`, and `cacafire` after changes were made.
- Made a bunch of ligatures with `Cascadia Code` in the Terminal
before/after the changes and confirmed they still ligate.
- Ran `dir` in Powershell and fixed the scrolling issues
- Clicked all over the place and dragged to make sure selection works.
- Checked retro terminal effect manually with Powershell.
My basic idea was that `WM_CHAR` is just the better `WM_KEYDOWN`.
The latter fails to properly support common dead key sequences like in
#3516.
As such I added some logic to `Terminal::SendKeyEvent` to make it return
false if the pressed key represents a printable character.
This causes us to receive a character event with a (hopefully) correctly
composed code unit, which then gets sent to `Terminal::SendCharEvent`.
`Terminal::SendCharEvent` in turn had to be modified to support
potentially pressed modifier keys, since `Terminal::SendKeyEvent` isn't
doing that for us anymore.
Lastly `TerminalInput` had to be modified heavily to support character
events with modifier key states. In order to do so I merged its
`HandleKey` and `HandleChar` methods into a single one, that now handles
both cases.
Since key events will now contain character data and character events
key codes the decision logic in `TerminalInput::HandleKey` had to be
rewritten.
## PR Checklist
* [x] CLA signed
* [x] Tests added/passed
* [x] I've discussed this with core contributors already.
## Validation Steps Performed
* See #3516.
* I don't have any keyboard that generates surrogate characters. Due to
this I modified `TermControl::_SendPastedTextToConnection` to send the
data to `_terminal->SendCharEvent()` instead. I then pasted the test
string ""𐐌𐐜𐐬" and ensured that the new `TerminalInput::_SendChar`
method still correctly assembles surrogate pairs.
Closes#3516Closes#3554 (obsoleted by this PR)
Potentially impacts #391, which sounds like a duplicate of #3516
## Summary of the Pull Request
`TrimWhitespace` is misleading. So it is now renamed as 'singleLine'. If true, it comes out as a single line! That makes more sense!
## PR Checklist
* [X] Closes#3824
## Validation Steps Performed
Attempted the keybinding with both settings (and none set).
Attempted mouse copy with and without shift.
## Summary of the Pull Request
As we've learned in #979, not all touchpads are created equal. Some of them have bad drivers that makes scrolling inactive windows not work. For whatever reason, these devices think the Terminal is all one giant inactive window, so we don't get the mouse wheel events through the XAML stack. We do however get the event as a `WM_MOUSEWHEEL` on those devices (a message we don't get on devices with normally functioning trackpads).
This PR attempts to take that `WM_MOUSEWHEEL` and manually dispatch it to the `TermControl`, so we can at least scroll the terminal content.
Unfortunately, this solution is not very general purpose. This only works to scroll controls that manually implement our own `IMouseWheelListener` interface. As we add more controls, we'll need to continue manually implementing this interface, until the underlying XAML Islands bug is fixed. **I don't love this**. I'd rather have a better solution, but it seems that we can't synthesize a more general-purpose `PointerWheeled` event that could get routed through the XAML tree as normal.
## References
* #2606 and microsoft/microsoft-ui-xaml#2101 - these bugs are also tracking a similar "inactive windows" / "scaled mouse events" issue in XAML
## PR Checklist
* [x] Closes#979
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I've also added a `til::point` conversion _to_ `winrt::Windows::Foundation::Point`, and some scaling operators for `point`
## Validation Steps Performed
* It works on my HP Spectre 2017 with a synaptics trackpad
- I also made sure to test that `tmux` works in panes on this laptop
* It works on my slaptop, and DOESN'T follow this hack codepath on this machine.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR will allow TSFInputControl to redraw its Canvas and TextBlock in response to when the Terminal cursor position updates. This will fix the issue where during Korean composition, the first symbol of the next composition will appear on top of the previous composed character. Since the Terminal Cursor updates a lot, I've added some checks to see if the TSFInputControl really needs to redraw. This will also decrease the number of actual redraws since we receive a bunch of `LayoutRequested` events when there's no difference between them.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4963
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Startup, teardown, CJK IME gibberish testing, making sure the IME block shows up in the right place.
This commit rewrites selection handling at the TermControl layer.
Previously, we were keeping track of a number of redundant variables
that were easy to get out of sync.
The new selection model is as follows:
* A single left click will always begin a _pending_ selection operation
* A single left click will always clear a selection (#4477)
* A double left click will always begin a word selection
* A triple left click will always begin a line selection
* A selection will only truly start when the cursor moves a quarter of
the smallest dimension of a cell (usually its width) in any direction
_This eliminates the selection of a single cell on one click._
(#4282, #5082)
* We now keep track of whether the selection has been "copied", or
"updated" since it was last copied. If an endpoint moves, it is
updated. For copy-on-select, it is only copied if it's updated.
(#4740)
Because of this, we can stop tracking the position of the focus-raising
click, and whether it was part of click-drag operation. All clicks can
_become_ part of a click-drag operation if the user drags.
We can also eliminate the special handling of single cell selection at
the TerminalCore layer: since TermControl determines when to begin a
selection, TerminalCore no longer needs to know whether copy on select
is enabled _or_ whether the user has started and then backtracked over a
single cell. This is now implicit in TermControl.
Fixes#5082; Fixes#4477
This commit introduces a github action to check our spelling and fixes
the following misspelled words so that we come up green.
It also renames TfEditSes to TfEditSession, because Ses is not a word.
currently, excerpt, fallthrough, identified, occurred, propagate,
provided, rendered, resetting, separate, succeeded, successfully,
terminal, transferred, adheres, breaks, combining, preceded,
architecture, populated, previous, setter, visible, window, within,
appxmanifest, hyphen, control, offset, powerpoint, suppress, parsing,
prioritized, aforementioned, check in, build, filling, indices, layout,
mapping, trying, scroll, terabyte, vetoes, viewport, whose
This commit upgrades C++/WinRT to 2.0.200316.3 and fixes a couple of the
transitive dependency issues we had in the process.
Because the latest version has better dependency resolution, we're able
to properly depend on Microsoft.UI.Xaml and the Toolkit in TerminalApp
and TerminalAppLib so we no longer need to manually include .dll and
.pri files.
Because of nebulous _other_ changes in dependency resolution,
WindowsTerminalUniversal isn't picking up transitive .winmd dependencies
from TerminalApp, and needs to include them as ProjectReferences
directly. This was already happening transitively, so now it's explicit.
I've also taken the time to upgrade GSL to v2.1.0, the last release
before they removed span::at and blew up our world.
## Summary of the Pull Request
Seriously just read the code on this one, it's so incredibly obvious what I did wrong
## References
Regressed with #4741
## PR Checklist
* [x] Closes#5029
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
This is 100% on me. Even after mucking around in this function for the last 3
months, I missed that there was a single addition where we weren't doing a
clamped addition. This would lead to us creating a buffer with negative height,
and all sorts of badness.
Clamping this addition was enough to fix the bug.
## PR Checklist
* [x] Closes#2815
* [x] Closes#4972
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* ran tests
* Created a profile with `"historySize" : 32728`, then filled the viewport with
text, then maximized, and saw that the viewport indeed did resize to the new
size of the window.
## Summary of the Pull Request
Block selections were always read and displayed as line selections in UIA. This fixes that.
## PR Checklist
* [x] Closes#4509
## Detailed Description of the Pull Request / Additional comments
1. Expose `IsBlockSelection()` via IUiaData
2. Update the constructor to be able to take in a block selection parameter
3. Make ScreenInfoUiaProviders pass step 1 output into step 2 constructor
4. Update all instances of `UiaTextRange::GetTextRects()` to include this new flag
## Validation Steps Performed
Manually tested.
Additional tests would be redundant as GetTextRects() is tested in the text buffer.
## Summary of the Pull Request
This _actually_ implements `\033c`
([RIS](https://vt100.net/docs/vt220-rm/chapter4.html)) for the Windows Terminal.
I thought I had done this in #4433, but that PR actually only passthrough'd
`\x1b[3J`. I didn't realize at the time that #2715 was mostly about hard reset,
not erase scrollback.
Not only should conpty pass through RIS, but the Terminal should also be
prepared to actually handle that sequence. So this PR adds that support as well.
## References
* #4433: original PR I thought fixed this.
## PR Checklist
* [x] Closes#2715 for real this time
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Actually tested `printf \033c` in the Terminal this time
## Summary of the Pull Request
Currently, when the user resizes the Terminal, we'll snap the visible viewport back to the bottom of the buffer. This PR changes the visible viewport of the Terminal to instead remain in the same relative location it was before the resize.
## References
Made possible by our sponsors at #4741, and listeners like you.
## PR Checklist
* [x] Closes#3494
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
We already hated the `std::optional<short>&` thing I yeet'd into #4741 right at the end to replace a `short*`. So I was already going to change that to a `std::optional<std::reference_wrapper<short>>`, which is more idomatic. But then I was looking through the list of bugs and #3494 caught my eye. I realized it would be trivial to not only track the top of the `mutableViewport` during a resize, but we could use the same code path to track the _visible_ viewport's start as well.
So basically I'm re-using that bit of code in `Reflow` to calculate the visible viewport's position too.
## Validation Steps Performed
Gotta love just resizing things all day, errday
