This is #17291 (which got reverted), with some added fixups, and change
so that tests actually pick up the error.
The problem was that we were not calculating any new chain IDs due to a
missing `not` in a condition.
Reduce the replication traffic of device lists, by not sending every
destination that needs to be sent the device list update over
replication. Instead a "hosts to send to have been calculated"
notification over replication, and then federation senders read the
destinations from the DB.
For non federation senders this should heavily reduce the impact of a
user in many large rooms changing a device.
This reverts commit bdf82efea5 (#17291)
This seems to have stopped persisting auth chains for new events, and so
is causing state res to fall back to the slow methods
We calculate the auth chain links outside of the main persist event
transaction to ensure that we do not block other event sending during
the calculation.
Sort is no longer configurable and we always sort rooms by the `stream_ordering` of the last event in the room or the point where the user can see up to in cases of leave/ban/invite/knock.
Add `event.internal_metadata.instance_name` (the worker instance that persisted the event) to go alongside the existing `event.internal_metadata.stream_ordering`.
`instance_name` is useful to properly compare and query for events with a token since you need to compare both the `stream_ordering` and `instance_name` against the vector clock/`instance_map` in the `RoomStreamToken`.
This is pre-requisite work and may be used in https://github.com/element-hq/synapse/pull/17293
Adding `event.internal_metadata.instance_name` was first mentioned in the initial Sliding Sync PR while pairing with @erikjohnston, see 09609cb0db (diff-5cd773fb307aa754bd3948871ba118b1ef0303f4d72d42a2d21e38242bf4e096R405-R410)
PR where this was introduced: https://github.com/matrix-org/synapse/pull/14817
### What does this affect?
`get_last_event_in_room_before_stream_ordering(...)` is used in Sync v2 in a lot of different state calculations.
`get_last_event_in_room_before_stream_ordering(...)` is also used in `/rooms/{roomId}/members`
https://github.com/matrix-org/matrix-spec-proposals/pull/4151
This is intended to be enabled by default for immediate use. When FCP is
complete, the unstable endpoint will be dropped and stable endpoint
supported instead - no backwards compatibility is expected for the
unstable endpoint.
Spawning from https://github.com/element-hq/synapse/pull/17187#discussion_r1619492779 around wanting to put `SlidingSyncBody` (parse the request in the rest layer), `SlidingSyncConfig` (from the rest layer, pass to the handler), `SlidingSyncResponse` (pass the response from the handler back to the rest layer to respond) somewhere that doesn't contaminate the imports and cause circular import issues.
- Moved Pydantic parsing models to `synapse/types/rest`
- Moved handler types to `synapse/types/handlers`
Based on [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575): Sliding Sync
This iteration only focuses on returning the list of room IDs in the sliding window API (without sorting/filtering).
Rooms appear in the Sliding sync response based on:
- `invite`, `join`, `knock`, `ban` membership events
- Kicks (`leave` membership events where `sender` is different from the `user_id`/`state_key`)
- `newly_left` (rooms that were left during the given token range, > `from_token` and <= `to_token`)
- In order for bans/kicks to not show up, you need to `/forget` those rooms. This doesn't modify the event itself though and only adds the `forgotten` flag to `room_memberships` in Synapse. There isn't a way to tell when a room was forgotten at the moment so we can't factor it into the from/to range.
### Example request
`POST http://localhost:8008/_matrix/client/unstable/org.matrix.msc3575/sync`
```json
{
"lists": {
"foo-list": {
"ranges": [ [0, 99] ],
"sort": [ "by_notification_level", "by_recency", "by_name" ],
"required_state": [
["m.room.join_rules", ""],
["m.room.history_visibility", ""],
["m.space.child", "*"]
],
"timeline_limit": 100
}
}
}
```
Response:
```json
{
"next_pos": "s58_224_0_13_10_1_1_16_0_1",
"lists": {
"foo-list": {
"count": 1,
"ops": [
{
"op": "SYNC",
"range": [0, 99],
"room_ids": [
"!MmgikIyFzsuvtnbvVG:my.synapse.linux.server"
]
}
]
}
},
"rooms": {},
"extensions": {}
}
```
Use fully-qualified `PersistedEventPosition` (`instance_name` and `stream_ordering`) when returning `RoomsForUser` to facilitate proper comparisons and `RoomStreamToken` generation.
Spawning from https://github.com/element-hq/synapse/pull/17187 where we want to utilize this change
We try and deduplicate in two places: 1) really early on, and 2) just
before we persist the event. The first case was broken due to it
occuring before the profile information was added, and so it thought the
event contents were different.
The second case did catch it and handle it correctly, however doing so
creates a redundant state group leading to bloat.
Fixes#3791
There is a problem with `StreamIdGenerator` where it can go backwards
over restarts when a stream ID is requested but then not inserted into
the DB. This is problematic if we want to land #17215, and is generally
a potential cause for all sorts of nastiness.
Instead of trying to fix `StreamIdGenerator`, we may as well move to
`MultiWriterIdGenerator` that does not suffer from this problem (the
latest positions are stored in `stream_positions` table). This involves
adding SQLite support to the class.
This only changes id generators that were already using
`MultiWriterIdGenerator` under postgres, a separate PR will move the
rest of the uses of `StreamIdGenerator` over.
When a module rejects a piece of media we end up trying to close the
same logging context twice.
Instead of fixing the existing code we refactor to use an async context
manager, which is easier to write correctly.
This PR ports the logic from the
[synapse_auto_accept_invite](https://github.com/matrix-org/synapse-auto-accept-invite)
module into synapse.
I went with the naive approach of injecting the "module" next to where
third party modules are currently loaded. If there is a better/preferred
way to handle this, I'm all ears. It wasn't obvious to me if there was a
better location to add this logic that would cleanly apply to all
incoming invite events.
Relies on https://github.com/element-hq/synapse/pull/17166 to fix linter
errors.
Removed `request_key` from the `SyncConfig` (moved outside as its own function parameter) so it doesn't have to flow into `_generate_sync_entry_for_xxx` methods. This way we can separate the concerns of caching from generating the response and reuse the `_generate_sync_entry_for_xxx` functions as we see fit. Plus caching doesn't really have anything to do with the config of sync.
Split from https://github.com/element-hq/synapse/pull/17167
Spawning from https://github.com/element-hq/synapse/pull/17167#discussion_r1601497279
This is to allow clients to query the configured federation whitelist.
Disabled by default.
---------
Co-authored-by: Devon Hudson <devonhudson@librem.one>
Co-authored-by: devonh <devon.dmytro@gmail.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
When there have been lots of changes compared with the number of
entities, we can do a fast(er) path.
Locally I ran some benchmarking, and the comparison seems to give the
best determination of which method we use.
This change will apply the `email` & `picture` provided by OIDC to the
new user account when registering a new user via OIDC. If the user is
directed to the account details form, this change makes sure they have
been selected before applying them, otherwise they are omitted. In
particular, this change ensures the values are carried through when
Synapse has consent configured, and the redirect to the consent form/s
are followed.
I have tested everything manually. Including:
- with/without consent configured
- allowing/not allowing the use of email/avatar (via
`sso_auth_account_details.html`)
- with/without automatic account detail population (by un/commenting the
`localpart_template` option in synapse config).
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [X] Pull request is based on the develop branch
* [X] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [X] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
