This triggers the client to start a new sliding sync connection. If we
don't do this and the client asks for the full range of rooms, we end up
sending down all rooms and their state from scratch (which can be very
slow)
This causes things like
https://github.com/element-hq/element-x-ios/issues/3115 after we restart
the server
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Update `filters.is_encrypted` and `filters.types`/`filters.not_types` to
be robust when dealing with remote invite rooms in Sliding Sync.
Part of
[MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575):
Sliding Sync
Follow-up to https://github.com/element-hq/synapse/pull/17434
We now take into account current state, fallback to stripped state
for invite/knock rooms, then historical state. If we can't determine
the info needed to filter a room (either from state or stripped state),
it is filtered out.
Rather than always including all rooms in range.
Also adds a pre-filter to rooms that checks the stream change cache to
see if anything might have happened.
Based on #17447
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
The basic idea is that we introduce a new token for a sliding sync
connection, which stores the mapping of room to room "status" (i.e. have
we sent the room down?). This token allows us to handle duplicate
requests properly. In future it can be used to store more
"per-connection" information safely.
In future this should be migrated into the DB, so its important that we
try to reduce the number of syncs where we need to update the
per-connection information. In this PoC this only happens when we: a)
send down a set of room for the first time, or b) we have previously
sent down a room and there are updates but we are not sending the room
down the sync (due to not falling in a list range)
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Backfill events have a negative stream ordering, and so its not useful
to use to compare with other (positive) stream orderings.
Plus, the Rust SDK currently assumes `bump_stamp` is positive.
Introduced in: #17215
This caused us a minor bit of grief as the volume of logs produced was
much higher than normal
---------
Signed-off-by: Olivier 'reivilibre <oliverw@matrix.org>
This is to address an issue in which `m.presence` results on initial
sync are not returning entries of users who are currently offline.
The original behaviour was from
https://github.com/element-hq/synapse/issues/1535
This change is useful for applications that use the
presence system for tracking user profile information/updates (e.g.
https://github.com/element-hq/synapse/pull/16992 or for profile status
messages).
This is gated behind a new configuration option to avoid performance
impact for applications that don't need this, as a pragmatic solution
for now.
Bumps [pyopenssl](https://github.com/pyca/pyopenssl) from 24.1.0 to
24.2.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pyca/pyopenssl/blob/main/CHANGELOG.rst">pyopenssl's
changelog</a>.</em></p>
<blockquote>
<h2>24.2.1 (2024-07-20)</h2>
<p>Backward-incompatible changes:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^</p>
<p>Deprecations:
^^^^^^^^^^^^^</p>
<p>Changes:
^^^^^^^^</p>
<ul>
<li>Fixed changelog to remove sphinx specific restructured text
strings.</li>
</ul>
<h2>24.2.0 (2024-07-20)</h2>
<p>Backward-incompatible changes:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^</p>
<p>Deprecations:
^^^^^^^^^^^^^</p>
<ul>
<li>Deprecated <code>OpenSSL.crypto.X509Req</code>,
<code>OpenSSL.crypto.load_certificate_request</code>,
<code>OpenSSL.crypto.dump_certificate_request</code>. Instead,
<code>cryptography.x509.CertificateSigningRequest</code>,
<code>cryptography.x509.CertificateSigningRequestBuilder</code>,
<code>cryptography.x509.load_der_x509_csr</code>, or
<code>cryptography.x509.load_pem_x509_csr</code> should be used.</li>
</ul>
<p>Changes:
^^^^^^^^</p>
<ul>
<li>Added type hints for the <code>SSL</code> module.
<code>[#1308](https://github.com/pyca/pyopenssl/issues/1308)
<https://github.com/pyca/pyopenssl/pull/1308></code>_.</li>
<li>Changed <code>OpenSSL.crypto.PKey.from_cryptography_key</code> to
accept public and private EC, ED25519, ED448 keys.
<code>[#1310](https://github.com/pyca/pyopenssl/issues/1310)
<https://github.com/pyca/pyopenssl/pull/1310></code>_.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8dd9457865"><code>8dd9457</code></a>
24.2.1 (<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1320">#1320</a>)</li>
<li><a
href="19f093e0c3"><code>19f093e</code></a>
make changelog vanilla rst (<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1319">#1319</a>)</li>
<li><a
href="e265b2867b"><code>e265b28</code></a>
Prepare for 24.2.0 release (<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1318">#1318</a>)</li>
<li><a
href="6943ee524e"><code>6943ee5</code></a>
Deprecate CSR support in pyOpenSSL (<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1316">#1316</a>)</li>
<li><a
href="01b9b56373"><code>01b9b56</code></a>
Add more type definitions for <code>SSL</code> module, check with mypy
(<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1313">#1313</a>)</li>
<li><a
href="cdcb48baf7"><code>cdcb48b</code></a>
Prune redundant <code>:rtype:</code> from SSL module (<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1315">#1315</a>)</li>
<li><a
href="b86914d37f"><code>b86914d</code></a>
Fix <code>ruff</code> invocation (<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1314">#1314</a>)</li>
<li><a
href="caa1ab3ac5"><code>caa1ab3</code></a>
Update changelog for PR <a
href="https://redirect.github.com/pyca/pyopenssl/issues/1308">#1308</a>
and <a
href="https://redirect.github.com/pyca/pyopenssl/issues/1310">#1310</a>
(<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1311">#1311</a>)</li>
<li><a
href="9a2105501f"><code>9a21055</code></a>
Allow loading EC, ED25519, ED448 public keys from cryptography (<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1310">#1310</a>)</li>
<li><a
href="9eaa107362"><code>9eaa107</code></a>
Add type annotations for the <code>SSL</code> module (<a
href="https://redirect.github.com/pyca/pyopenssl/issues/1308">#1308</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/pyca/pyopenssl/compare/24.1.0...24.2.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
As it gets used in sliding sync.
We basically invalidate it in all the same places as
`get_rooms_for_user`. Most of the changes are due to needing the
arguments you pass in to be hashable (which lists aren't)
