At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
`room_invite_state_types` was inconvenient as a configuration setting, because
anyone that ever set it would not receive any new types that were added to the
defaults. Here, we deprecate the old setting, and replace it with a couple of
new settings under `room_prejoin_state`.
This should fix a class of bug where we forget to check if e.g. the appservice shouldn't be ratelimited.
We also check the `ratelimit_override` table to check if the user has ratelimiting disabled. That table is really only meant to override the event sender ratelimiting, so we don't use any values from it (as they might not make sense for different rate limits), but we do infer that if ratelimiting is disabled for the user we should disabled all ratelimits.
Fixes#9663
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
Currently federation catchup will send the last *local* event that we
failed to send to the remote. This can cause issues for large rooms
where lots of servers have sent events while the remote server was down,
as when it comes back up again it'll be flooded with events from various
points in the DAG.
Instead, let's make it so that all the servers send the most recent
events, even if its not theirs. The remote should deduplicate the
events, so there shouldn't be much overhead in doing this.
Alternatively, the servers could only send local events if they were
also extremities and hope that the other server will send the event
over, but that is a bit risky.
This bug was discovered by DINUM. We were modifying `serialized_event["content"]`, which - if you've got `USE_FROZEN_DICTS` turned on or are [using a third party rules module](17cd48fe51/synapse/events/third_party_rules.py (L73-L76)) - will raise a 500 if you try to a edit a reply to a message.
`serialized_event["content"]` could be set to the edit event's content, instead of a copy of it, which is bad as we attempt to modify it. Instead, we also end up modifying the original event's content. DINUM uses a third party rules module, which meant the event's content got frozen and thus an exception was raised.
To be clear, the problem is not that the event's content was frozen. In fact doing so helped us uncover the fact we weren't copying event content correctly.
Instead of if the user does not have a password hash. This allows a SSO
user to add a password to their account, but only if the local password
database is configured.
Fixes https://github.com/matrix-org/synapse/issues/9572
When a SSO user logs in for the first time, we create a local Matrix user for them. This goes through the register_user flow, which ends up triggering the spam checker. Spam checker modules don't currently have any way to differentiate between a user trying to sign up initially, versus an SSO user (whom has presumably already been approved elsewhere) trying to log in for the first time.
This PR passes `auth_provider_id` as an argument to the `check_registration_for_spam` function. This argument will contain an ID of an SSO provider (`"saml"`, `"cas"`, etc.) if one was used, else `None`.
Federation catch up mode is very inefficient if the number of events
that the remote server has missed is small, since handling gaps can be
very expensive, c.f. #9492.
Instead of going into catch up mode whenever we see an error, we instead
do so only if we've backed off from trying the remote for more than an
hour (the assumption being that in such a case it is more than a
transient failure).
Unfortunately this doesn't test re-joining the room since
that requires having another homeserver to query over
federation, which isn't easily doable in unit tests.
This great big stack of commits is a a whole load of hoop-jumping to make it easier to store additional values in login tokens, and then to actually store the SSO Identity Provider in the login token. (Making use of that data will follow in a subsequent PR.)
### Changes proposed in this PR
- Add support for the `no_proxy` and `NO_PROXY` environment variables
- Internally rely on urllib's [`proxy_bypass_environment`](bdb941be42/Lib/urllib/request.py (L2519))
- Extract env variables using urllib's `getproxies`/[`getproxies_environment`](bdb941be42/Lib/urllib/request.py (L2488)) which supports lowercase + uppercase, preferring lowercase, except for `HTTP_PROXY` in a CGI environment
This does contain behaviour changes for consumers so making sure these are called out:
- `no_proxy`/`NO_PROXY` is now respected
- lowercase `https_proxy` is now allowed and taken over `HTTPS_PROXY`
Related to #9306 which also uses `ProxyAgent`
Signed-off-by: Timothy Leung tim95@hotmail.co.uk
* Split ShardedWorkerHandlingConfig
This is so that we have a type level understanding of when it is safe to
call `get_instance(..)` (as opposed to `should_handle(..)`).
* Remove special cases in ShardedWorkerHandlingConfig.
`ShardedWorkerHandlingConfig` tried to handle the various different ways
it was possible to configure federation senders and pushers. This led to
special cases that weren't hit during testing.
To fix this the handling of the different cases is moved from there and
`generic_worker` into the worker config class. This allows us to have
the logic in one place and allows the rest of the code to ignore the
different cases.
This PR remove the cache for the `get_shared_rooms_for_users` storage method (the db method driving the experimental "what rooms do I share with this user?" feature: [MSC2666](https://github.com/matrix-org/matrix-doc/pull/2666)). Currently subsequent requests to the endpoint will return the same result, even if your shared rooms with that user have changed.
The cache was added in https://github.com/matrix-org/synapse/pull/7785, but we forgot to ensure it was invalidated appropriately.
Upon attempting to invalidate it, I found that the cache had to be entirely invalidated whenever a user (remote or local) joined or left a room. This didn't make for a very useful cache, especially for a function that may or may not be called very often. Thus, I've opted to remove it instead of invalidating it.
This PR attempts to eliminate unnecessary presence sending work when your local server joins a room, or when a remote server joins a room your server is participating in by processing state deltas in chunks rather than individually.
---
When your server joins a room for the first time, it requests the historical state as well. This chunk of new state is passed to the presence handler which, after filtering that state down to only membership joins, will send presence updates to homeservers for each join processed.
It turns out that we were being a bit naive and processing each event individually, and sending out presence updates for every one of those joins. Even if many different joins were users on the same server (hello IRC bridges), we'd send presence to that same homeserver for every remote user join we saw.
This PR attempts to deduplicate all of that by processing the entire batch of state deltas at once, instead of only doing each join individually. We process the joins and note down which servers need which presence:
* If it was a local user join, send that user's latest presence to all servers in the room
* If it was a remote user join, send the presence for all local users in the room to that homeserver
We deduplicate by inserting all of those pending updates into a dictionary of the form:
```
{
server_name1: {presence_update1, ...},
server_name2: {presence_update1, presence_update2, ...}
}
```
Only after building this dict do we then start sending out presence updates.
This PR adds a homeserver config option, `user_directory.prefer_local_users`, that when enabled will show local users higher in user directory search results than remote users. This option is off by default.
Note that turning this on doesn't necessarily mean that remote users will always be put below local users, but they should be assuming all other ranking factors (search query match, profile information present etc) are identical.
This is useful for, say, University networks that are openly federating, but want to prioritise local students and staff in the user directory over other random users.
Add off-by-default configuration settings to:
- disable putting an invitee's profile info in invite events
- disable profile lookup via federation
Signed-off-by: Andrew Ferrazzutti <fair@miscworks.net>
This reduces the memory usage of previewing media files which
end up larger than the `max_spider_size` by avoiding buffering
content internally in treq.
It also checks the `Content-Length` header in additional places
instead of streaming the content to check the body length.
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](80d6dc9783/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
-----BEGIN PGP SIGNATURE-----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=NSyp
-----END PGP SIGNATURE-----
Merge tag 'v1.27.0rc2' into develop
Synapse 1.27.0rc2 (2021-02-11)
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
Fixes some exceptions if the room state isn't quite as expected.
If the expected state events aren't found, try to find them in the
historical room state. If they still aren't found, fallback to a reasonable,
although ugly, value.
This could arguably replace the existing admin API for `/members`, however that is out of scope of this change.
This sort of endpoint is ideal for moderation use cases as well as other applications, such as needing to retrieve various bits of information about a room to perform a task (like syncing power levels between two places). This endpoint exposes nothing more than an admin would be able to access with a `select *` query on their database.
* Fixes a case where no summary text was returned.
* The use of messages_from_person vs. messages_from_person_and_others
was tweaked to depend on whether there was 1 sender or multiple senders,
not based on if there was 1 room or multiple rooms.
There's some prelimiary work here to pull out the construction of a jinja environment to a separate function.
I wanted to load the template at display time rather than load time, so that it's easy to update on the fly. Honestly, I think we should do this with all our templates: the risk of ending up with malformed templates is far outweighed by the improved turnaround time for an admin trying to update them.
Fixes#8966.
* Factor out build_synapse_client_resource_tree
Start a function which will mount resources common to all workers.
* Move sso init into build_synapse_client_resource_tree
... so that we don't have to do it for each worker
* Fix SSO-login-via-a-worker
Expose the SSO login endpoints on workers, like the documentation says.
* Update workers config for new endpoints
Add documentation for endpoints recently added (#8942, #9017, #9262)
* remove submit_token from workers endpoints list
this *doesn't* work on workers (yet).
* changelog
* Add a comment about the odd path for SAML2Resource
There are going to be a couple of paths to get to the final step of SSO reg, and I want the URL in the browser to consistent. So, let's move the final step onto a separate path, which we redirect to.
Treat unknown encodings (according to lxml) as UTF-8
when generating a preview for HTML documents. This
isn't fully accurate, but will hopefully give a reasonable
title and summary.
This expands the current shadow-banning feature to be usable via
the admin API and adds documentation for it.
A shadow-banned users receives successful responses to their
client-server API requests, but the events are not propagated into rooms.
Shadow-banning a user should be used as a tool of last resort and may lead
to confusing or broken behaviour for the client.
==============================
Bugfixes
--------
- Fix receipts and account data not being sent down sync. Introduced in v1.26.0rc1. ([\#9193](https://github.com/matrix-org/synapse/issues/9193), [\#9195](https://github.com/matrix-org/synapse/issues/9195))
- Fix chain cover update to handle events with duplicate auth events. Introduced in v1.26.0rc1. ([\#9210](https://github.com/matrix-org/synapse/issues/9210))
Internal Changes
----------------
- Add an `oidc-` prefix to any `idp_id`s which are given in the `oidc_providers` configuration. ([\#9189](https://github.com/matrix-org/synapse/issues/9189))
- Bump minimum `psycopg2` version to v2.8. ([\#9204](https://github.com/matrix-org/synapse/issues/9204))
-----BEGIN PGP SIGNATURE-----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=Qc7+
-----END PGP SIGNATURE-----
Merge tag 'v1.26.0rc2' into develop
Synapse 1.26.0rc2 (2021-01-25)
==============================
Bugfixes
--------
- Fix receipts and account data not being sent down sync. Introduced in v1.26.0rc1. ([\#9193](https://github.com/matrix-org/synapse/issues/9193), [\#9195](https://github.com/matrix-org/synapse/issues/9195))
- Fix chain cover update to handle events with duplicate auth events. Introduced in v1.26.0rc1. ([\#9210](https://github.com/matrix-org/synapse/issues/9210))
Internal Changes
----------------
- Add an `oidc-` prefix to any `idp_id`s which are given in the `oidc_providers` configuration. ([\#9189](https://github.com/matrix-org/synapse/issues/9189))
- Bump minimum `psycopg2` version to v2.8. ([\#9204](https://github.com/matrix-org/synapse/issues/9204))
If no thumbnail of the requested type exists, return a 404 instead
of erroring. This doesn't quite match the spec (which does not define
what happens if no thumbnail can be found), but is consistent with
what Synapse already does.
* Factor out a common TestHtmlParser
Looks like I'm doing this in a few different places.
* Improve OIDC login test
Complete the OIDC login flow, rather than giving up halfway through.
* Ensure that OIDC login works with multiple OIDC providers
* Fix bugs in handling clientRedirectUrl
- don't drop duplicate query-params, or params with no value
- allow utf-8 in query-params
0dd2649c1 (#9112) changed the signature of `auth_via_oidc`. Meanwhile,
26d10331e (#9091) introduced a new test which relied on the old signature of
`auth_via_oidc`. The two branches were never tested together until they landed
in develop.
We do this by allowing a single iteration to process multiple rooms at a
time, as there are often a lot of really tiny rooms, which can massively
slow things down.
This is the final step for supporting multiple OIDC providers concurrently.
First of all, we reorganise the config so that you can specify a list of OIDC providers, instead of a single one. Before:
oidc_config:
enabled: true
issuer: "https://oidc_provider"
# etc
After:
oidc_providers:
- idp_id: prov1
issuer: "https://oidc_provider"
- idp_id: prov2
issuer: "https://another_oidc_provider"
The old format is still grandfathered in.
With that done, it's then simply a matter of having OidcHandler instantiate a new OidcProvider for each configured provider.
Protecting media stops it from being quarantined when
e.g. all media in a room is quarantined. This is useful
for sticker packs and other media that is uploaded by
server administrators, but used by many people.
* make the OIDC bits of the test work at a higher level - via the REST api instead of poking the OIDCHandler directly.
* Move it to test_login.py, where I think it fits better.
Again in preparation for handling more than one OIDC provider, add a new caveat to the macaroon used as an OIDC session cookie, which remembers which OIDC provider we are talking to. In future, when we get a callback, we'll need it to make sure we talk to the right IdP.
As part of this, I'm adding an idp_id and idp_name field to the OIDC configuration object. They aren't yet documented, and we'll just use the old values by default.
The idea here is that we will have an instance of OidcProvider for each
configured IdP, with OidcHandler just doing the marshalling of them.
For now it's still hardcoded with a single provider.
This checks that the domain given to `DomainSpecificString.is_valid` (e.g.
`UserID`, `RoomAlias`, etc.) is of a valid form. Previously some validation
was done on the localpart (e.g. the sigil), but not the domain portion.
Some light refactoring of OidcHandler, in preparation for bigger things:
* remove inheritance from deprecated BaseHandler
* add an object to hold the things that go into a session cookie
* factor out a separate class for manipulating said cookies
SynapseRequest is in danger of becoming a bit of a dumping-ground for "useful stuff relating to Requests",
which isn't really its intention (its purpose is to override render, finished and connectionLost to set up the
LoggingContext and write the right entries to the request log).
Putting utility functions inside SynapseRequest means that lots of our code ends up requiring a
SynapseRequest when there is nothing synapse-specific about the Request at all, and any old
twisted.web.iweb.IRequest will do. This increases code coupling and makes testing more difficult.
In short: move get_user_agent out to a utility function.
* Implement CasHandler.handle_redirect_request
... to make it match OidcHandler and SamlHandler
* Clean up interface for OidcHandler.handle_redirect_request
Make it accept `client_redirect_url=None`.
* Clean up interface for `SamlHandler.handle_redirect_request`
... bring it into line with CAS and OIDC by making it take a Request parameter,
move the magic for `client_redirect_url` for UIA into the handler, and fix the
return type to be a `str` rather than a `bytes`.
* Define a common protocol for SSO auth provider impls
* Give SsoIdentityProvider an ID and register them
* Combine the SSO Redirect servlets
Now that the SsoHandler knows about the identity providers, we can combine the
various *RedirectServlets into a single implementation which delegates to the
right IdP.
* changelog
The `RoomDirectoryFederationTests` tests were not being run unless explicitly called as an `__init__.py` file was not present in `tests/federation/transport/`. Thus the folder was not a python module, and `trial` did not look inside for any test cases to run. This was found while working on #6739.
This PR adds a `__init__.py` and also fixes the test in a couple ways:
- Switch to subclassing `unittest.FederatingHomeserverTestCase` instead, which sets up federation endpoints for us.
- Supply a `federation_auth_origin` to `make_request` in order to more act like the request is coming from another server, instead of just an unauthenicated client requesting a federation endpoint.
I found that the second point makes no difference to the test passing, but felt like the right thing to do if we're testing over federation.
This adds an admin API that allows a server admin to get power in a room if a local user has power in a room. Will also invite the user if they're not in the room and its a private room. Can specify another user (rather than the admin user) to be granted power.
Co-authored-by: Matthew Hodgson <matthew@matrix.org>
This had two effects 1) it'd give the wrong answer and b) would iterate
*all* power levels in the auth chain of each event. The latter of which
can be *very* expensive for certain types of IRC bridge rooms that have
large numbers of power level changes.
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
Fixes a bug that deactivated users appear in the directory when their profile information was updated.
To change profile information of deactivated users is neccesary for example you will remove displayname or avatar.
But they should not appear in directory. They are deactivated.
Co-authored-by: Erik Johnston <erikj@jki.re>
This is another part of my work towards fixing #8876. It moves some of the logic currently in the SAML and OIDC handlers - in particular the call to `AuthHandler.complete_sso_login` down into the `SsoHandler`.
The two are equivalent, but really we want to check the HTTP result that got
returned to the channel, not the code that the Request object *intended* to
return to the channel.
* move simple_async_mock to test_utils
... so that it can be re-used
* Remove references to `SamlHandler._map_saml_response_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead,
factor out a higher-level method which takes a SAML object, and verify correct
behaviour by mocking out `AuthHandler.complete_sso_login`.
* changelog
* Remove references to handler._auth_handler
(and replace them with hs.get_auth_handler)
* Factor out a utility function for building Requests
* Remove mocks of `OidcHandler._map_userinfo_to_user`
This method is going away, so mocking it out is no longer a valid approach.
Instead, we mock out lower-level methods (eg _remote_id_from_userinfo), or
simply allow the regular implementation to proceed and update the expectations
accordingly.
* Remove references to `OidcHandler._map_userinfo_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead
we build mock "callback" requests which we pass into `handle_oidc_callback`,
and verify correct behaviour by mocking out `AuthHandler.complete_sso_login`.
* Call set_avatar_url with target_user, not user_id
Fixes https://github.com/matrix-org/synapse/issues/8871
* Create 8872.bugfix
* Update synapse/rest/admin/users.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Testing
* Update changelog.d/8872.bugfix
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
==============================
Bugfixes
--------
- Fix a regression in v1.24.0rc1 which failed to allow SAML mapping providers which were unable to redirect users to an additional page. ([\#8878](https://github.com/matrix-org/synapse/issues/8878))
Internal Changes
----------------
- Add support for the `prometheus_client` newer than 0.9.0. Contributed by Jordan Bancino. ([\#8875](https://github.com/matrix-org/synapse/issues/8875))
-----BEGIN PGP SIGNATURE-----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=is1Y
-----END PGP SIGNATURE-----
Merge tag 'v1.24.0rc2' into develop
Synapse 1.24.0rc2 (2020-12-04)
==============================
Bugfixes
--------
- Fix a regression in v1.24.0rc1 which failed to allow SAML mapping providers which were unable to redirect users to an additional page. ([\#8878](https://github.com/matrix-org/synapse/issues/8878))
Internal Changes
----------------
- Add support for the `prometheus_client` newer than 0.9.0. Contributed by Jordan Bancino. ([\#8875](https://github.com/matrix-org/synapse/issues/8875))
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
We do state res with unpersisted events when calculating the new current state of the room, so that should be the only thing impacted. I don't think this is tooooo big of a deal as:
1. the next time a state event happens in the room the current state should correct itself;
2. in the common case all the unpersisted events' auth events will be pulled in by other state, so will still return the correct result (or one which is sufficiently close to not affect the result); and
3. we mostly use the state at an event to do important operations, which isn't affected by this.
Rather than using a single JsonResource, construct a resource tree, as we do in
the prod code, and allow testcases to add extra resources by overriding
`create_resource_dict`.
This was broken in #8801 when abstracting code shared with OIDC.
After this change both SAML and OIDC have a concept of
grandfathering users, but with different implementations.
This PR adds a `room_version` argument to the `RestHelper`'s `create_room_as` function for tests. I plan to use this for testing knocking, which currently uses an unstable room version.
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes#5665.
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
Checks that the localpart returned by mapping providers for SAML and
OIDC are valid before registering new users.
Extends the OIDC tests for existing users and invalid data.
* Consistently use room_id from federation request body
Some federation APIs have a redundant `room_id` path param (see
https://github.com/matrix-org/matrix-doc/issues/2330). We should make sure we
consistently use either the path param or the body param, and the body param is
easier.
* Kill off some references to "context"
Once upon a time, "rooms" were known as "contexts". I think this kills of the
last references to "contexts".
remove the stubbing out of `request.process`, so that `requestReceived` also renders the request via the appropriate resource.
Replace render() with a stub for now.
The root resource isn't necessarily a JsonResource, so rename this method
accordingly, and update a couple of test classes to use the method rather than
directly manipulating self.resource.
Where we want to render a request against a specific Resource, call the global
make_request() function rather than the one in HomeserverTestCase, allowing us
to pass in an appropriate `Site`.
I idly noticed that these lists were out of sync with each other, causing us to miss a table in a test case (`local_invites`). Let's consolidate this list instead to prevent this from happening in the future.
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
This allows trailing commas in multi-line arg lists.
Minor, but we might as well keep our formatting current with regard to
our minimum supported Python version.
Signed-off-by: Dan Callahan <danc@element.io>
Split admin API for reported events in detail und list view.
API was introduced with #8217 in synapse v.1.21.0.
It makes the list (`GET /_synapse/admin/v1/event_reports`) less complex and provides a better overview.
The details can be queried with: `GET /_synapse/admin/v1/event_reports/<report_id>`.
It is similar to room and users API.
It is a kind of regression in `GET /_synapse/admin/v1/event_reports`. `event_json` was removed. But the api was introduced one version before and it is an admin API (not under spec).
Signed-off-by: Dirk Klimpel dirk@klimpel.org
#8567 started a span for every background process. This is good as it means all Synapse code that gets run should be in a span (unless in the sentinel logging context), but it means we generate about 15x the number of spans as we did previously.
This PR attempts to reduce that number by a) not starting one for send commands to Redis, and b) deferring starting background processes until after we're sure they're necessary.
I don't really know how much this will help.
