You can't continue using a transaction once an exception has been
raised, so catching and dropping the error here is pointless and just
causes more errors.
I'm not even sure what this was supposed to do, but the fact it has python2isms
and nobody has noticed suggests it's not terribly important.
It doesn't seem to have been used since ff23e5ba37.
* Implement CasHandler.handle_redirect_request
... to make it match OidcHandler and SamlHandler
* Clean up interface for OidcHandler.handle_redirect_request
Make it accept `client_redirect_url=None`.
* Clean up interface for `SamlHandler.handle_redirect_request`
... bring it into line with CAS and OIDC by making it take a Request parameter,
move the magic for `client_redirect_url` for UIA into the handler, and fix the
return type to be a `str` rather than a `bytes`.
* Define a common protocol for SSO auth provider impls
* Give SsoIdentityProvider an ID and register them
* Combine the SSO Redirect servlets
Now that the SsoHandler knows about the identity providers, we can combine the
various *RedirectServlets into a single implementation which delegates to the
right IdP.
* changelog
The `RoomDirectoryFederationTests` tests were not being run unless explicitly called as an `__init__.py` file was not present in `tests/federation/transport/`. Thus the folder was not a python module, and `trial` did not look inside for any test cases to run. This was found while working on #6739.
This PR adds a `__init__.py` and also fixes the test in a couple ways:
- Switch to subclassing `unittest.FederatingHomeserverTestCase` instead, which sets up federation endpoints for us.
- Supply a `federation_auth_origin` to `make_request` in order to more act like the request is coming from another server, instead of just an unauthenicated client requesting a federation endpoint.
I found that the second point makes no difference to the test passing, but felt like the right thing to do if we're testing over federation.
This adds an admin API that allows a server admin to get power in a room if a local user has power in a room. Will also invite the user if they're not in the room and its a private room. Can specify another user (rather than the admin user) to be granted power.
Co-authored-by: Matthew Hodgson <matthew@matrix.org>
This had two effects 1) it'd give the wrong answer and b) would iterate
*all* power levels in the auth chain of each event. The latter of which
can be *very* expensive for certain types of IRC bridge rooms that have
large numbers of power level changes.
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
Fixes a bug that deactivated users appear in the directory when their profile information was updated.
To change profile information of deactivated users is neccesary for example you will remove displayname or avatar.
But they should not appear in directory. They are deactivated.
Co-authored-by: Erik Johnston <erikj@jki.re>
This is another part of my work towards fixing #8876. It moves some of the logic currently in the SAML and OIDC handlers - in particular the call to `AuthHandler.complete_sso_login` down into the `SsoHandler`.
* move simple_async_mock to test_utils
... so that it can be re-used
* Remove references to `SamlHandler._map_saml_response_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead,
factor out a higher-level method which takes a SAML object, and verify correct
behaviour by mocking out `AuthHandler.complete_sso_login`.
* changelog
* Remove references to handler._auth_handler
(and replace them with hs.get_auth_handler)
* Factor out a utility function for building Requests
* Remove mocks of `OidcHandler._map_userinfo_to_user`
This method is going away, so mocking it out is no longer a valid approach.
Instead, we mock out lower-level methods (eg _remote_id_from_userinfo), or
simply allow the regular implementation to proceed and update the expectations
accordingly.
* Remove references to `OidcHandler._map_userinfo_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead
we build mock "callback" requests which we pass into `handle_oidc_callback`,
and verify correct behaviour by mocking out `AuthHandler.complete_sso_login`.
* Factor out _call_attribute_mapper and _register_mapped_user
This is mostly an attempt to simplify `get_mxid_from_sso`.
* Move mapping_lock down into SsoHandler.
It seems that letting CircleCI use its default docker version (17.09.0-ce,
apparently) did not interact well with multiarch builds: in particular, we saw
weird effects where running an amd64 build at the same time as an arm64 build
caused the arm64 builds to fail with:
Error while loading /usr/sbin/dpkg-deb: No such file or directory
The idea is that the parse_config method of extension modules can raise either a ConfigError or a JsonValidationError,
and it will be magically turned into a legible error message. There's a few components to it:
* Separating the "path" and the "message" parts of a ConfigError, so that we can fiddle with the path bit to turn it
into an absolute path.
* Generally improving the way ConfigErrors get printed.
* Passing in the config path to load_module so that it can wrap any exceptions that get caught appropriately.
* SsoHandler: remove inheritance from BaseHandler
* Simplify the flow for SSO UIA
We don't need to do all the magic for mapping users when we are doing UIA, so
let's factor that out.
* Call set_avatar_url with target_user, not user_id
Fixes https://github.com/matrix-org/synapse/issues/8871
* Create 8872.bugfix
* Update synapse/rest/admin/users.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Testing
* Update changelog.d/8872.bugfix
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This removes the version pin of the `prometheus_client` dependency, in direct response to #8831. If merged, this will close#8831
As far as I can tell, no other changes are needed, but as I'm no synapse expert, I'm relying heavily on CI and maintainer reviews for this. My very primitive test of synapse with prometheus_client v0.9.0 on my home server didn't bring up any issues, so we'll see what happens.
Signed-off-by: Jordan Bancino
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
We do state res with unpersisted events when calculating the new current state of the room, so that should be the only thing impacted. I don't think this is tooooo big of a deal as:
1. the next time a state event happens in the room the current state should correct itself;
2. in the common case all the unpersisted events' auth events will be pulled in by other state, so will still return the correct result (or one which is sufficiently close to not affect the result); and
3. we mostly use the state at an event to do important operations, which isn't affected by this.
The official dashboard uses data from these rules, but they were never added to the synapse-v2.rules. They are mentioned in this issue: https://github.com/matrix-org/synapse/issues/7917#issuecomment-661330409, but never got added to the rules.
Adding them results in all graphs in the "Event persist rate" section to function as intended.
Signed-off-by: Johanna Dorothea Reichmann <transcaffeine@finallycoffee.eu>
This was broken in #8801 when abstracting code shared with OIDC.
After this change both SAML and OIDC have a concept of
grandfathering users, but with different implementations.
This PR adds a `room_version` argument to the `RestHelper`'s `create_room_as` function for tests. I plan to use this for testing knocking, which currently uses an unstable room version.
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes#5665.
It's important that we make sure our background updates happen in a defined
order, to avoid disasters like #6923.
Add an ordering to all of the background updates that have landed since #7190.
This applies even if the feature is disabled at the server level with `allow_per_room_profiles`.
The server notice not being a real user it doesn't have an user profile.
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
This PR grew out of #6739, and adds typing to some method arguments
You'll notice that there are a lot of `# type: ignores` in here. This is due to the base methods not matching the overloads here. This is necessary to stop mypy complaining, but a better solution is #8828.
We can get a SIGHUP at any point, including times where we are not in a
sane state. By deferring calling the handlers until the next reactor
tick we ensure that we don't get unexpected conflicts, e.g. trying to
flush logs from the signal handler while the code was in the process of
writing a log entry.
Fixes#8769.
When server URL provided to register_new_matrix_user includes path
component (e.g. "http://localhost:8008/"), the command fails with
"ERROR! Received 400 Bad Request". Stripping trailing slash from the
server_url command argument makes sure combined endpoint URL remains
valid.
Signed-off-by: Dmitry Borodaenko angdraug@debian.org
This is another PR that grew out of #6739.
The existing code for checking whether a user is currently invited to a room when they want to leave the room looks like the following:
f737368a26/synapse/handlers/room_member.py (L518-L540)
It calls `get_invite_for_local_user_in_room`, which will actually query *all* rooms the user has been invited to, before iterating over them and matching via the room ID. It will then return a tuple of a lot of information which we pull the event ID out of.
I need to do a similar check for knocking, but this code wasn't very efficient. I then tried to write a different implementation using `StateHandler.get_current_state` but this actually didn't work as we haven't *joined* the room yet - we've only been invited to it. That means that only certain tables in Synapse have our desired `invite` membership state. One of those tables is `local_current_membership`.
So I wrote a store method that just queries that table instead
Synctl did not check if a worker thread was already running when using
`synctl start` and would naively start a fresh copy. This would
sometimes lead to cases where many duplicate copies of a single worker
would run.
This fix adds a pid check when starting worker threads and synctl will
now refuse to start individual workers if they're already running.
When using `add_header` nginx will literally add a header. If a
`content-type` header is already configured (for example through a
server wide default), this means we end up with 2 content-type headers,
like so:
```
content-type: text/html
content-type: application/json
access-control-allow-origin: *
```
That doesn't make sense. Instead, we want the content type of that
block to only be `application/json` which we can achieve using
`default_type` instead.
Signed-off-by: Daniele Sluijters <daenney@users.noreply.github.com>
Checks that the localpart returned by mapping providers for SAML and
OIDC are valid before registering new users.
Extends the OIDC tests for existing users and invalid data.
* Consistently use room_id from federation request body
Some federation APIs have a redundant `room_id` path param (see
https://github.com/matrix-org/matrix-doc/issues/2330). We should make sure we
consistently use either the path param or the body param, and the body param is
easier.
* Kill off some references to "context"
Once upon a time, "rooms" were known as "contexts". I think this kills of the
last references to "contexts".
* Make this line debug (it's noisy)
* Don't include from_key for presence if we are at 0
* Limit read receipts for all rooms to 100
* changelog.d/8744.bugfix
* Allow from_key to be None
* Update 8744.bugfix
* The from_key is superflous
* Update comment
`_locally_reject_invite` generates an out-of-band membership event which can be passed to clients, but not other homeservers.
This is used when we fail to reject an invite over federation. If this happens, we instead just generate a leave event locally and send it down /sync, allowing clients to reject invites even if we can't reach the remote homeserver.
A similar flow needs to be put in place for rescinding knocks. If we're unable to contact any remote server from the room we've tried to knock on, we'd still like to generate and store the leave event locally. Hence the need to reuse, and thus generalise, this method.
Separated from #6739.
The root resource isn't necessarily a JsonResource, so rename this method
accordingly, and update a couple of test classes to use the method rather than
directly manipulating self.resource.
There's a handy function called maybe_store_room_on_invite which allows us to create an entry in the rooms table for a room and its version for which we aren't joined to yet, but we can reference when ingesting events about.
This is currently used for invites where we receive some stripped state about the room and pass it down via /sync to the client, without us being in the room yet.
There is a similar requirement for knocking, where we will eventually do the same thing, and need an entry in the rooms table as well. Thus, reusing this function works, however its name needs to be generalised a bit.
Separated out from #6739.
The main use case is to see how many requests are being made, and how
many are second/third/etc attempts. If there are large number of retries
then that likely indicates a delivery problem.
If the script fails (or is CTRL-C'ed) between porting some of the events table and copying of the sequences then the port script will immediately die if run again due to the postgres DB having inconsistencies between sequences and tables.
The fix is to move the porting of sequences to before porting the tables, so that there is never a period where the Postgres DB is inconsistent. To do that we need to change how we port the sequences so that it calculates the values from the SQLite DB rather than the Postgres DB.
Fixes#8619
This should hopefully speed up `get_auth_chain_difference` a bit in the case of repeated state res on the same rooms.
`get_auth_chain_difference` does a breadth first walk of the auth graphs by repeatedly looking up events' auth events. Different state resolutions on the same room will end up doing a lot of the same event to auth events lookups, so by caching them we should speed things up in cases of repeated state resolutions on the same room.
`adbapi.ConnectionPool` let's you turn on auto reconnect of DB connections. This is off by default.
As far as I can tell if its not enabled dead connections never get removed from the pool.
Maybe helps #8574
* Check support room has only two users
* Create 8728.bugfix
* Update synapse/server_notices/server_notices_manager.py
Co-authored-by: Erik Johnston <erik@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
If SSO login is used (e.g. SAML) in a multi worker setup, it should be mentioned that currently all SAML logins must run on the same worker, see https://github.com/matrix-org/synapse/issues/7530
Also, if you are using different ports (for example 443 and 8448) in a reverse proxy for client and federation, the path `/_matrix/media` on the client and federation port must point to the listener of the `media_repository` worker, otherwise you'll get a 404 on the federation port for the path `/_matrix/media`, if a remote server is trying to get the media object on federation port, see https://github.com/matrix-org/synapse/issues/8695
This PR adds some documentation that:
* Describes who the audience for the `docs/`, `docs/dev/` and `docs/admin/` directories are, as well as Synapse's wiki page.
* Stresses that we'd like all documentation to be down in markdown.
I idly noticed that these lists were out of sync with each other, causing us to miss a table in a test case (`local_invites`). Let's consolidate this list instead to prevent this from happening in the future.
This PR fixes two things:
* Corrects the copy/paste error of telling the client their displayname is wrong when they are submitting an `avatar_url`.
* Returns a `M_INVALID_PARAM` instead of `M_UNKNOWN` for non-str type parameters.
Reported by @t3chguy.
* Tie together matches_user_in_member_list and get_users_in_room
* changelog
* Remove type to fix mypy
* Add `on_invalidate` to the function signature in the hopes that may make things work well
* Remove **kwargs
* Update 8676.bugfix
* Tie together matches_user_in_member_list and get_users_in_room
* changelog
* Remove type to fix mypy
* Add `on_invalidate` to the function signature in the hopes that may make things work well
* Remove **kwargs
* Update 8676.bugfix
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
Cached functions accept an `on_invalidate` function, which we failed to add to the type signature. It's rarely used in the files that we have typed, which is why we haven't noticed it before.
otherwise non-state events get written as `<FrozenEvent ... state_key='None'>`
which is indistinguishable from state events with the actual state_key `None`.
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
Not being able to serialise `frozendicts` is fragile, and it's annoying to have
to think about which serialiser you want. There's no real downside to
supporting frozendicts, so let's just have one json encoder.
I was trying to make it so that we didn't have to start a background task when handling RDATA, but that is a bigger job (due to all the code in `generic_worker`). However I still think not pulling the event from the DB may help reduce some DB usage due to replication, even if most workers will simply go and pull that event from the DB later anyway.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This allows trailing commas in multi-line arg lists.
Minor, but we might as well keep our formatting current with regard to
our minimum supported Python version.
Signed-off-by: Dan Callahan <danc@element.io>
The test runner isn't present in the `[all]` set of extras, so the
previous instructions did not work without also installing `[test]`.
Note that this does not include the `[lint]` extras, since those do not
install on all supported Python versions (specifically, isort 5.x
requires Python 3.6, while we still support 3.5). Instructions for that
are included in our pull request template, so we should be fine there.
I've also dropped the `--no-use-pep517` arg to `pip install` since it
seems to have been added to address a temporary regression in pip 19.1
which was fixed in pip 19.1.1 the following month.
Lastly, updated the example output of the test suite to set more
realistic expectations around run time.
Signed-off-by: Dan Callahan <danc@element.io>
This is a requirement for [knocking](https://github.com/matrix-org/synapse/pull/6739), and is abstracting some code that was originally used by the invite flow. I'm separating it out into this PR as it's a fairly contained change.
For a bit of context: when you invite a user to a room, you send them [stripped state events](https://matrix.org/docs/spec/server_server/unstable#put-matrix-federation-v2-invite-roomid-eventid) as part of `invite_room_state`. This is so that their client can display useful information such as the room name and avatar. The same requirement applies to knocking, as it would be nice for clients to be able to display a list of rooms you've knocked on - room name and avatar included.
The reason we're sending membership events down as well is in the case that you are invited to a room that does not have an avatar or name set. In that case, the client should use the displayname/avatar of the inviter. That information is located in the inviter's membership event.
This is optional as knocks don't really have any user in the room to link up to. When you knock on a room, your knock is sent by you and inserted into the room. It wouldn't *really* make sense to show the avatar of a random user - plus it'd be a data leak. So I've opted not to send membership events to the client here. The UX on the client for when you knock on a room without a name/avatar is a separate problem.
In essence this is just moving some inline code to a reusable store method.
it seems to be possible that only one of them ends up to be cached.
when this was the case, the missing one was not fetched via federation,
and clients then failed to validate cross-signed devices.
Signed-off-by: Jonas Jelten <jj@sft.lol>
Split admin API for reported events in detail und list view.
API was introduced with #8217 in synapse v.1.21.0.
It makes the list (`GET /_synapse/admin/v1/event_reports`) less complex and provides a better overview.
The details can be queried with: `GET /_synapse/admin/v1/event_reports/<report_id>`.
It is similar to room and users API.
It is a kind of regression in `GET /_synapse/admin/v1/event_reports`. `event_json` was removed. But the api was introduced one version before and it is an admin API (not under spec).
Signed-off-by: Dirk Klimpel dirk@klimpel.org
==============================
Bugfixes
--------
- Fix bugs where ephemeral events were not sent to appservices. Broke in v1.22.0rc1. ([\#8648](https://github.com/matrix-org/synapse/issues/8648), [\#8656](https://github.com/matrix-org/synapse/issues/8656))
- Fix `user_daily_visits` table to not have duplicate rows per user/device due to multiple user agents. Broke in v1.22.0rc1. ([\#8654](https://github.com/matrix-org/synapse/issues/8654))
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEBTGR3/RnAzBGUif3pULk7RsPrAkFAl+W6QIQHGVyaWtAbWF0
cml4Lm9yZwAKCRClQuTtGw+sCR/EB/9Afs/QiqD7uJ7XtAASwlOxcpSrvB6xSMzU
VIiYLrUSCvHe8SwcPG6nToy69hHmwLBPu9e8gvlQkOY4nJpW9VTGvhFcP5eCgeKd
vDp+elVD6BPg+6S3RaI/F5hyQ7gn9qZ/WexkVixDkVs5eAL3gNlZcjw9RwaT9ei9
fEOYlMi1CRSRzKVBPMEFCAvOpJJ8rA/iq4JK7+P0TplkhD+HydG0cYr6OoL7CmaD
L/au565Ynp6o0hSpNpTFqW6C5W5JRvz/TyG9/N95h9+WqubZzsPPDUzh98B3eBoX
43Wu9Qoc3mNamf0++HbHGUPI8dRV1gssxL01hs/iLUZz7CxXY+Ir
=Z3sQ
-----END PGP SIGNATURE-----
Merge tag 'v1.22.0rc2' into develop
Synapse 1.22.0rc2 (2020-10-26)
==============================
Bugfixes
--------
- Fix bugs where ephemeral events were not sent to appservices. Broke in v1.22.0rc1. ([\#8648](https://github.com/matrix-org/synapse/issues/8648), [\#8656](https://github.com/matrix-org/synapse/issues/8656))
- Fix `user_daily_visits` table to not have duplicate rows per user/device due to multiple user agents. Broke in v1.22.0rc1. ([\#8654](https://github.com/matrix-org/synapse/issues/8654))
* Fix user_daily_visits to not have duplicate rows for UA.
Fixes#8641.
* Newsfile
* Fix typo.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
#8567 started a span for every background process. This is good as it means all Synapse code that gets run should be in a span (unless in the sentinel logging context), but it means we generate about 15x the number of spans as we did previously.
This PR attempts to reduce that number by a) not starting one for send commands to Redis, and b) deferring starting background processes until after we're sure they're necessary.
I don't really know how much this will help.
* Limit AS transactions to 100 events
* Update changelog.d/8606.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Add tests
* Update synapse/appservice/scheduler.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
I noticed in https://github.com/matrix-org/synapse/issues/8575 that the `end_error` variable in `synapse_port_db` is set to an `Exception`, even though later we expect it to be a `str`.
This PR simply casts an exception raised to a string. I'm doing this instead of having `end_error` be of type exception as we explicitly set `end_error` to a str here:
d25eb8f370/scripts/synapse_port_db (L542-L547)
This whole file could probably use some heavy refactoring, but until then at least this fix will prevent exception contents from being hidden from us and users.
* Add `DeferredCache.get_immediate` method
A bunch of things that are currently calling `DeferredCache.get` are only
really interested in the result if it's completed. We can optimise and simplify
this case.
* Remove unused 'default' parameter to DeferredCache.get()
* another get_immediate instance
* type annotations for LruCache
* changelog
* Apply suggestions from code review
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* review comments
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This implements a more standard API for instantiating a homeserver and
moves some of the dependency injection into the test suite.
More concretely this stops using `setattr` on all `kwargs` passed to `HomeServer`.
This PR makes several changes to the `./scripts-dev/lint.sh` script, which lints the codebase with a number of tools:
* Adds usage information, with `-h` flag to show it. Otherwise it will show when providing an unknown flag.
* Adds option `-d` which will check both staged and unstaged files that have changed since the last commit and add them to the list of files to lint.
- Note that only files without an extension, or with a `.py` extension will be allowed. This prevents editing bash scripts causing the linters to break on non-python files.
* Improves the print-out of which files/directories are being linted.
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
Autocommit means that we don't wrap the functions in transactions, and instead get executed directly. Introduced in #8456. This will help:
1. reduce the number of `could not serialize access due to concurrent delete` errors that we see (though there are a few functions that often cause serialization errors that we don't fix here);
2. improve the DB performance, as it no longer needs to deal with the overhead of `REPEATABLE READ` isolation levels; and
3. improve wall clock speed of these functions, as we no longer need to send `BEGIN` and `COMMIT` to the DB.
Some notes about the differences between autocommit mode and our default `REPEATABLE READ` transactions:
1. Currently `autocommit` only applies when using PostgreSQL, and is ignored when using SQLite (due to silliness with [Twisted DB classes](https://twistedmatrix.com/trac/ticket/9998)).
2. Autocommit functions may get retried on error, which means they can get applied *twice* (or more) to the DB (since they are not in a transaction the previous call would not get rolled back). This means that the functions need to be idempotent (or otherwise not care about being called multiple times). Read queries, simple deletes, and updates/upserts that replace rows (rather than generating new values from existing rows) are all idempotent.
3. Autocommit functions no longer get executed in [`REPEATABLE READ`](https://www.postgresql.org/docs/current/transaction-iso.html) isolation level, and so data can change queries, which is fine for single statement queries.
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
Currently background proccesses stream the events stream use the "minimum persisted position" (i.e. `get_current_token()`) rather than the vector clock style tokens. This is broadly fine as it doesn't matter if the background processes lag a small amount. However, in extreme cases (i.e. SyTests) where we only write to one event persister the background processes will never make progress.
This PR changes it so that the `MultiWriterIDGenerator` keeps the current position of a given instance as up to date as possible (i.e using the latest token it sees if its not in the process of persisting anything), and then periodically announces that over replication. This then allows the "minimum persisted position" to advance, albeit with a small lag.
This could, very occasionally, cause:
```
tests.test_visibility.FilterEventsForServerTestCase.test_large_room
===============================================================================
[ERROR]
Traceback (most recent call last):
File "/src/tests/rest/media/v1/test_media_storage.py", line 86, in test_ensure_media_is_in_local_cache
self.wait_on_thread(x)
File "/src/tests/unittest.py", line 296, in wait_on_thread
self.reactor.advance(0.01)
File "/src/.tox/py35/lib/python3.5/site-packages/twisted/internet/task.py", line 826, in advance
self._sortCalls()
File "/src/.tox/py35/lib/python3.5/site-packages/twisted/internet/task.py", line 787, in _sortCalls
self.calls.sort(key=lambda a: a.getTime())
builtins.ValueError: list modified during sort
tests.rest.media.v1.test_media_storage.MediaStorageTests.test_ensure_media_is_in_local_cache
```
This PR allows Synapse modules making use of the `ModuleApi` to create and send non-membership events into a room. This can useful to have modules send messages, or change power levels in a room etc. Note that they must send event through a user that's already in the room.
The non-membership event limitation is currently arbitrary, as it's another chunk of work and not necessary at the moment.
==============================
Bugfixes
--------
- Fix duplication of events on high traffic servers, caused by PostgreSQL `could not serialize access due to concurrent update` errors. ([\#8456](https://github.com/matrix-org/synapse/issues/8456))
Internal Changes
----------------
- Add Groovy Gorilla to the list of distributions we build `.deb`s for. ([\#8475](https://github.com/matrix-org/synapse/issues/8475))
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEBTGR3/RnAzBGUif3pULk7RsPrAkFAl9+7JIQHGVyaWtAbWF0
cml4Lm9yZwAKCRClQuTtGw+sCUc1B/9Bz8uAEJWX9qahuWZGrsvj0ukF/9O6YWrU
ZZGHnyaAXg4MF0lR6DVCV2NhW/l3RWO01G/LgGT//0vac+EFxWDbjuaHP9pRVBln
02TQpn12ceZtW/n+X+8wmQzfSn1zNWRUycV43MyGu49z3IAG7KVjjVDQPkY0mEHC
h6THy30SYIOKDCdXUUL9i+sV1JLzKPX0NlzO3ONKe2LbfLiBTvdfDRlZGq6rJu5H
GAsIPwgadhanhXBPhG4WrealG31TkcPbZCwFMv9aFzltU841jps+QN6OKvbGFVer
FboD2df0ZJqKNJOJVVlOMs7I5uSYbrg+n1zolZfrbo0lk/xEyIAT
=F5cw
-----END PGP SIGNATURE-----
Merge tag 'v1.21.0rc3' into develop
Synapse 1.21.0rc3 (2020-10-08)
==============================
Bugfixes
--------
- Fix duplication of events on high traffic servers, caused by PostgreSQL `could not serialize access due to concurrent update` errors. ([\#8456](https://github.com/matrix-org/synapse/issues/8456))
Internal Changes
----------------
- Add Groovy Gorilla to the list of distributions we build `.deb`s for. ([\#8475](https://github.com/matrix-org/synapse/issues/8475))
Added shields directing to synapse-dev room, showing license, latest version on PyPi and supported Python versions.
I've moved substitution definitions to the bottom to improve readability.
Signed-off-by: Mateusz Przybyłowicz <uamfhq@gmail.com>
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
Currently when using multiple event persisters we (in the worst case) don't tell clients about events until all event persisters have persisted new events after the original event. This is a suboptimal, especially if one of the event persisters goes down.
To handle this, we encode the position of each event persister in the room tokens so that we can send events to clients immediately. To reduce the size of the token we do two things:
1. We create a unique immutable persistent mapping between instance names and a generated small integer ID, which we can encode in the tokens instead of the instance name; and
2. We encode the "persisted upto position" of the room token and then only explicitly include instances that have positions strictly greater than that.
The new tokens look something like: `m3478~1.3488~2.3489`, where the first number is the min position, and the subsequent `-` separated pairs are the instance ID to positions map. (We use `.` and `~` as separators as they're URL safe and not already used by `StreamToken`).
It seems most of these blacklisted tests do actually pass most of the time.
I'm of the opinion that having them blacklisted here means there is very little incentive for us to deflake any flaky tests, and meanwhile any value in those tests is completely lost.
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
https://github.com/matrix-org/synapse/tree/develop/docs/sphinx doesn't seem to really be utilised or changed recently since the initial commit. I like the idea of exportable documentation of the codebase, but at the moment after running through the build instructions the generated website wasn't very useful...
* Optimise and test state fetching for 3p event rules
Getting all the events at once is much more efficient than getting them
individually
* Test that 3p event rules can modify events
PR #8292 tried to maintain backwards compat with modules which don't provide a
`check_visibility_can_be_modified` method, but the tests weren't being run,
and the check didn't work.
This PR allows `ThirdPartyEventRules` modules to view, manipulate and block changes to the state of whether a room is published in the public rooms directory.
While the idea of whether a room is in the public rooms list is not kept within an event in the room, `ThirdPartyEventRules` generally deal with controlling which modifications can happen to a room. Public rooms fits within that idea, even if its toggle state isn't controlled through a state event.
There's no need for it to be in the dict as well as the events table. Instead,
we store it in a separate attribute in the EventInternalMetadata object, and
populate that on load.
This means that we can rely on it being correctly populated for any event which
has been persited to the database.
This is so we can tell what is going on when things are taking a while to start up.
The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
#7124 changed the behaviour of remote thumbnails so that the thumbnailing method was included in the filename of the thumbnail. To support existing files, it included a fallback so that we would check the old filename if the new filename didn't exist.
Unfortunately, it didn't apply this logic to storage providers, so any thumbnails stored on such a storage provider was broken.
For negative streams we have to negate the internal stream ID before
querying the DB.
The effect of this bug was to query far too many rows, slowing start up
time, but we would correctly filter the results afterwards so there was
no ill effect.
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
* Don't check whether a 3pid is allowed to register during password reset
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
* Changelog
* Fix table scan of events on worker startup.
This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.
Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.
* Consider old writers coming back as "new".
Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This PR adds a script that:
* Builds the local Synapse checkout using our existing `docker/Dockerfile` image.
* Downloads [Complement](https://github.com/matrix-org/complement/)'s source code.
* Builds the [Synapse.Dockerfile](https://github.com/matrix-org/complement/blob/master/dockerfiles/Synapse.Dockerfile) using the above dockerfile as a base.
* Builds and runs Complement against it.
This set up differs slightly from [that of the dendrite repo](https://github.com/matrix-org/dendrite/blob/master/build/scripts/complement.sh) (`complement.sh`, `Complement.Dockerfile`), which instead stores a separate, but slightly modified, dockerfile in Dendrite's repo rather than running the one stored in Complement's repo. That synapse equivalent to that dockerfile (`Synapse.Dockerfile`) in Complement's repo is just based on top of `matrixdotorg/synapse:latest`, which we opt to build here locally.
Thus copying over the files from Complement's repo wouldn't change any functionality, and would result in two instances of the same files. So just using the dockerfile in Complement's repo was decided upon instead.
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
This table was created in #8034 (1.20.0). It references
`ui_auth_sessions`, which is ignored, so this one should be too.
Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
* Fix test_verify_json_objects_for_server_awaits_previous_requests
It turns out that this wasn't really testing what it thought it was testing
(in particular, `check_context` was turning failures into success, which was
making the tests pass even though it wasn't clear they should have been.
It was also somewhat overcomplex - we can test what it was trying to test
without mocking out perspectives servers.
* Fix warnings about finished logcontexts in the keyring
We need to make sure that we finish the key fetching magic before we run the
verifying code, to ensure that we don't mess up our logcontexts.
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.
We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
I'd like to get a better insight into what we are doing with respect to state
res. The list of state groups we are resolving across should be short (if it
isn't, that's a massive problem in itself), so it should be fine to log it in
ite entiretly.
I've done some grepping and found approximately zero cases in which the
"shortcut" code delivered the result, so I've ripped that out too.
When updating the `room_stats_state` table, we try to check for null bytes slipping in to the content for state events. It turns out we had added `guest_access` as a field to room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a `m.room.guest_access` event then breaks `room_stats_state` updates.
This PR adds the check for `guest_access`.
This change adds a note and a few lines of configuration settings for Apache users to disable ModSecurity for Synapse's virtual hosts. With ModSecurity enabled and running with its default settings, Matrix clients are unable to send chat messages through the Synapse installation. With this change, ModSecurity can be disabled only for the Synapse virtual hosts.
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
-----BEGIN PGP SIGNATURE-----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=tT5/
-----END PGP SIGNATURE-----
Merge tag 'v1.20.0rc5' into develop
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Instead of just using the most recent extremities let's pick the
ones that will give us results that the pagination request cares about,
i.e. pick extremities only if they have a smaller depth than the
pagination token.
This is useful when we fail to backfill an extremity, as we no longer
get stuck requesting that same extremity repeatedly.
slots use less memory (and attribute access is faster) while slightly
limiting the flexibility of the class attributes. This focuses on objects
which are instantiated "often" and for short periods of time.
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
Some Linux distros have begun disabling TLSv1.0 and TLSv1.1 by default
for security reasons, for example in Fedora 33 onwards:
https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Use TLSv1.2 for the fake TLS servers created in the test suite, to avoid
failures due to OpenSSL disallowing TLSv1.0:
<twisted.python.failure.Failure OpenSSL.SSL.Error: [('SSL routines',
'ssl_choose_client_version', 'unsupported protocol')]>
Signed-off-by: Dan Callaghan <djc@djc.id.au>
This PR adds a information about forwarding `/_synapse/client` endpoints through your reverse proxy. The first of these endpoints are introduced in https://github.com/matrix-org/synapse/pull/8004.
The idea here is that we pass the `max_stream_id` to everything, and only use the stream ID of the particular event to figure out *when* the max stream position has caught up to the event and we can notify people about it.
This is to maintain the distinction between the position of an item in the stream (i.e. event A has stream ID 513) and a token that can be used to partition the stream (i.e. give me all events after stream ID 352). This distinction becomes important when the tokens are more complicated than a single number, which they will be once we start tracking the position of multiple writers in the tokens.
The valid operations here are:
1. Is a position before or after a token
2. Fetching all events between two tokens
3. Merging multiple tokens to get the "max", i.e. `C = max(A, B)` means that for all positions P where P is before A *or* before B, then P is before C.
Future PR will change the token type to a dedicated type.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
This fixes an issue where different methods (crop/scale) overwrite each other.
This first tries the new path. If that fails and we are looking for a
remote thumbnail, it tries the old path. If that still isn't found, it
continues as normal.
This should probably be removed in the future, after some of the newer
thumbnails were generated with the new path on most deployments. Then
the overhead should be minimal if the other thumbnails need to be
regenerated.
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
The intention here is to change `StreamToken.room_key` to be a `RoomStreamToken` in a future PR, but that is a big enough change without this refactoring too.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
This removes `SourcePaginationConfig` and `get_pagination_rows`. The reasoning behind this is that these generic classes/functions erased the types of the IDs it used (i.e. instead of passing around `StreamToken` it'd pass in e.g. `token.room_key`, which don't have uniform types).
By importing from canonicaljson the simplejson module was still being used
in some situations. After this change the std lib json is consistenty used
throughout Synapse.
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
The version 1.3.0 has a bug with unicode charecters:
```
>>> from canonicaljson import encode_pretty_printed_json
>>> encode_pretty_printed_json({'a': 'à'})
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/erdnaxeli/.pyenv/versions/3.6.7/lib/python3.6/site-packages/canonicaljson.py", line 96, in encode_pretty_printed_json
return _pretty_encoder.encode(json_object).encode("ascii")
UnicodeEncodeError: 'ascii' codec can't encode character '\xe0' in position 12: ordinal not in range(128)
```
Signed-off-by: Alexandre Morignot <erdnaxeli@cervoi.se>
Co-authored-by: Alexandre Morignot <erdnaxeli@cervoi.se>
* Fixup `ALTER TABLE` database queries
Make the new columns nullable, because doing otherwise can wedge a
server with a big database, as setting a default value rewrites the
table.
* Switch back to using the notifications count in the push badge
Clients are likely to be confused if we send a push but the badge count
is the unread messages one, and not the notifications one.
* Changelog
